Jaguar X-Type KEY PAIRING
HTML-код
- Опубликовано: 22 мар 2019
- Jaguar X Type KEY PAIRING
Jaguar X-Type KEY-PAIRING
In this video I show you how I two keys on a Jaguar X-type (03-09 models)
Please Like this video:👍 • Jaguar X-Type KEY PAIRING
Please subscribe to this channel:👍 goo.gl/eubNMd
Please share this video:👍 • Jaguar X-Type KEY PAIRING
Follow me on Twitter:👍 / hatboyharvey
CR2032 key fob battery: amzn.to/3Aw3dwW
Buy Harvey a Coffee: ko-fi.com/hatboyharvey
I thank all you guys for watching. Please let me know if this video helped you and what you think in the comments below and don't forget to like, share and subscribe for more escapades of HatBoyHarvey in the next video release,
(Oh and he’s the rabbit in the video if you’re wondering)
The content of this video is for information and entertainment value only and it's creator makes no claims, promise or guarantees of it's accuracy, coverage, instruction or adequacy of the procedures contained therein.
HatBoyHarvey assumes no liability for property damage or injury incurred as a result of any of the information contained in this video.
HatBoyHarvey recommends correct safety practices when working on motor vehicles, vehicle lifting tools, axle stands, hand tools, electrical equipment, chemical, products and consumable parts, lubricants or any other tools, equipment, chemical product and consumable parts, lubricants seen or implied in this video.
No information contained in this video shall create any expressed or implied warranty or guarantee of any kind of expected result including any injury, damage or loss that may result from improper use of the information contained in this video and the use of any tools, equipment, seen or described in this video and is the sole responsibility of the viewer and user and not HatBoyHarvey.
Music: Race_car / Front_Porch_Blues/ Crinoline Dreams.mp3_ youtube_audiolibrary 
Авто/Мото
Worked perfectly! $40 for new fobs instead of the hundreds the dealer was quoting me. Thank you!!! 😀
There are several viseos post dealing with this issue, this is by far the best ! Perfectly demonstrated, well done !👍🙏
Love yer man 👍 appreciate the support :-)
You my friend are a LEGEND 👍. Both of my fob keys died on me in as little as 3-4 months 😤 but I can happily say that your tutorial is absolutely SPOT ON! Thx 🙏
Well, thank you very much for those kind words, you are very welcome :-)
Worked like a charm. I thought some module was broken as both remote keys stopped working. Seems i only needed to pair it again. Big thank you for this.
Works perfectly 👍🏻 thanks. Couldn't get it to work to start with. But just needed to go between positions 1 and 2 a bit faster. Then it worked without any problem.
Great, it feels a bit of an odd thing to do, but that what they decided to do and once you hear the ping you know you have done it right. Easy really as long as you know :-)
Great clear instructions. Thank you!
Glad it was helpful :-)
Thanks a lot for this great video. You have increased my knowledge. Really I appreciate you. God bless you.
Thanks again, glad you liked the vid :-)
That was great, thumbs up and thank you
Thanks, glad to help. Will try to do more x-type videos - great cars :-)
Great video thanks!
Glad you liked it :-)
worked perfectly thank you
Great to hear, thanks :-)
Thank you so much, Sir. God bless you.
You are most welcome :-)
Thank you.
Спасибо друг👍
Thanks for this
Your welcome :-)
@@HatBoyHarvey will this crank the car will it be paired to the anti theft system too
Thank you very much! Will this work on my X-Type 2001?
unfortunately doesnt work for my x-type 3.0 V6 2005r. any thoughts ?
Is it a must to put key back into ignition after pairing? Many other videos don't mention that. Thanks in advance!
Thank you other videos did not say to take the key out then press the buttons then reinsert. The only said to press buttons after audible beep. I was about to return new remotes. Thank you so much all programmed 😁😁😁
You are welcome :-)
Tried programming keys some time ago ,no joy. tried again today worked no bother. brilliant, local garage thought it would need sorting via. main dealer. I think first time did not turn key fast enough.Your instructions must have saved me a fortune, being Scottish born and brought up in Yorkshire, that`s important Thanks again.
Ow do! T'is nowt ower a job, reight? Best t'doit fer thisen. Dealers won't'gier nowt fer owt tha'nos ;-)
god bless you
And you too, thank you :)
I have the same car but auto. My spare key randomly got stuck inside ignition, finally got it free by wiggling it. Im using my original key again and it still feels like it could get stuck again.... will this programming of they keys again possibly fix this?
No, the mechanical part of the key is completely separate to the electronics.
Hi
Great video! thanks!
Dumb question though, do you know is this is for a 2nd hand key (such as getting a key from a wrecker) or a new key on ebay?
Someone help with my query?
As long as the fequency is the same it can be programmed like this, but the transponder from another car will not work until that is programmed to the car by an auto locksmith or dealer. The actual flip key part can be purchased as a blank off ebay and cut, but this needs a specialist cutter for these keys.
@@HatBoyHarvey Thanks so very much!
Very help tutorial. However, I was wondering which key is in the ignition. The original or a new blank? I bought a new blank from eBay and want to try this. Thanks again
Good question, The original key has a transponder in the top key part to work. What I am programming in the video is the bottom part of the key, if you want a whole new key to work it needs the transponder chip programming to the same as your original one. This can best be done at a local locksmiths that code transponder keys.
I put the new 'buttons' end onto the old 'key' front end - just split both keys in half like you do when changing the battery (no need to expose the circuit board - just separate the two halves and swap them), swap new 'buttons' half for the old 'buttons' half. Chuck the old buttons and the new blank key bit. Pair as above, cleaning up the ignition lock with WD40 and exercise first (do it, necessary).
Like I say, just swap the new 'buttons' half of the key fob in and attach it to the front half of your old key fob (which has the transponder in it) @@HatBoyHarvey
I have only 1 key, is there any chance to do something? The key signals stopped working..
These can be tememental at times. The little microswitches fail either by the sodered joints or the button gets clogged with use and stopspressing. These can be replaced (ebay etc) if you are good with a soldering iron,but new boards are available on the internet and shoud work by pairing it, ebay has some. I have found that the battery contacts have to be just in the right place when you put the fob back together and may need a few "goes" to work, I have had this a number of times.
Tried this several times with no luck then tried with door open and it worked ,mine is an 04 x-type estate if this is of any help to anyone else.
Thanks for sharing that :-)
Unfortunately it doesn't work for me. The second key starts the engine as usual, but the fob does not work (battery checked - it's ok)😐
Sounds like you need to buy an new key. They can be had for very little online, ebay and work, easy to program, just like the video -)
Hi I solved it. I did just like on movie but it doesnt work at the end as it is showed here. So I drove a car a little and then stopped. Then doors started to work properly from the key closing and opening as previously.
You need to check the state of your main car battery. If the doors didn't work after you paired them, then it is likely that there wasn't enough power to actuate the locking motors which did work after the car was driven charging the battery enough for it to work. If the battery is in good order then it would most likely have been an electrical connection intermittent glitch such as corrosion/bad contact somewhere. Glad you have your car up and running again :-)
@@HatBoyHarvey
yes that should be the point because my car was not driven a few months.
Do you need to cut the key to match?
The key doesn't effect the pairing electronics.
Hi, my lock button has always been problematic. I have to press it very hard to make it work. Unlock and boot open OK. Panic/Courtesy light never worked. Took key apart, new battery but had same issue. Used some contact cleaner on the switch buttons as they were full of verdi grease. Got the panic light button to work then it didn't. So broken or cold solder joints probably. Is it worth trying to resolder the tiny buttons? Can you buy the printed circuit boards? Im in New Zealand and the car was an import from Japan. 3.0L AWD Sovereign Auto 2005. Doesn't have an alarm system interestingly. Not sure if thats market specific or if its been disabled?? Anyway I understand the frequencies are market/country specific?? How do I know which one to buy if they are available?? Thanks
Hi, you need to find the VIN code for your car and then decode it to find what frequency the car is set at. Most are international at 433Mhz, but The Jaguar Parts Catalogue shows the 2005 X-Type Key Fob for Japan as 315mhz. Search online to decipher your VIN is the safest for you. Then the replacement key parts are cheaply and easily available on Ebay; I've used those a number of times and they are easy and work. you can buy new buttons, but it is fiddly and not worth it as I say the whole board and key is cheap. Hope this helps. Oh, by the way I am publishing a new Jag video this Sunday so you may want to tune in for that one :-)
@@HatBoyHarvey Thanks, I have the VIN. Which letter or number in the sequence denotes the frequency?
I just looked it up online and the first 3 numbers SAJ denote Jaguar and the 4th digit denotes the market. If this is K then the car is made for Japan market A is rest of world.
Does this also work for the S-Type 2003?
www.bluejag.co.uk/S-Type-keyfob-reprogramming.php
Thank you so much. I‘m going to try those instructions!
Will this work on a 2009 jaguar x type 2.2d automatic ?
Same car, same key so it should be the same.
@@HatBoyHarvey can i just buy a jaguar x type key online and pair it with my key i have now like you did in the video? I have 1 key and i want to have a second but i don’t want it to be expensive en stuf like going to dealership
For programming wich i don’t understand since you can just do it so easy like you did
@@HatBoyHarvey ooh yeah also.. is it true you need to alteady have 2 working keys to
Do what you just did?
@@VintageVelocity99 it works with one key.
@@HatBoyHarvey ok thanks last question, after pulling the original key out the ignition do i only press the new key button or do i first press the original one en then the new one?
Don't work on mine