OMG!!! I made it after struggling 24 hours! XproF uses installer 2 and Flash 685F uses installer 1. And both devices use different cables!!! Bravo engineers at Godox! Thank you Alex!!!
I came looking for a video like this when my V1c would not connect to my Windows 11 system with a USB-C to USB-C cable. I swapped the cable to a USB 3.0 to USB_C cable, and G.3, which was already open with the firmware update selected, immediately connected, beeped, and invited me to update. All up to date now. 👍📸
ARE YOU LOOKING FOR FIX TO GET TO 1/256??? My trigger was only going to 1/128, but to get to 1/256 I just needed to change the range in the Menu. Menu>Step>1/256. Now I can adjust my AD600pro to this step with my R2 Trigger. I still haven't been able to figure out the installer and it recognizing my trigger. Also mac options on in the F3 installer are limited. Terrible support on this product. Perhaps I have the R2marki model which doesn't seem to have an installer for Nikon.
Hi, I just purchased a Godox AD400 PRO and AD600 PRO + 2 XPro Flash Triggers (for Nikon and Canon as well). While the Nikon system is working flawlessly, I have a problem with the Canon R5, where the lights are not responding at all. Both lights are working fine when I'm using the remote's test, but when I'm pressing the shutter, the pictures are taken, but the lights are not flashing. What I'm doing wrong? Should I modify something in the camera menu? The Lights are both set in channel 1, group A and B, respectively. Using precisely the same settings, Nikon D850 doesn't have any issue controlling the lights... simply can't understand what's going on... Any ideas?
Alex, I use the Godox system: XPro for Nikon and AD200 moonlight. I also have a Godox speed flash for backup. Do you notice any color shift with your Godox xPro? I understand it is a know problem with triggers. I heard about using a single-pin flash adapter between the hot shoe and the xPro trigger. I've used this setup for 2 years, but I just bought a Nikon Z50 mirrorless. And for some reason, the flash won't fire with the adapter on my Z50, but works fine on my D7100. Comments?
You can't, mirrorless cameras don't support that feature, not just Fujifilm, any brand in regard to Mirrorless. It has to do something with the infrared light not being able to be seen by the sensor.
I’m lost. They make this ridiculously complicated. I’m trying to update my x2t trigger to the latest version and my Mac doesn’t recognize the trigger. No matter the cable, etc. I guess I’m stuck using an old version. If anyone has any help, I’m flustered about it and could use any guidance.
Hello Alex.... Display of my Godox xpro trigger goes blank when I use it out doors in day light. However...no change in performance and It still triggers flash. What could be the problem? Can you help me out. Thanks in advance
my XPRO S shows v1.4 as the installed version. is this the most up to date version, or do i need to go to V1.3? im not sure i understand since most versions go up as in 1.1, 1.2 , then 1.3 etc. so which one is the most up to date?
I just bought this trigger for the AD200 pro with my 5D mark iv and it won't HSS - I've tried to update the software but it won't work with Mac Monterey!! wtf
OMG!!! I made it after struggling 24 hours! XproF uses installer 2 and Flash 685F uses installer 1. And both devices use different cables!!! Bravo engineers at Godox! Thank you Alex!!!
I came looking for a video like this when my V1c would not connect to my Windows 11 system with a USB-C to USB-C cable. I swapped the cable to a USB 3.0 to USB_C cable, and G.3, which was already open with the firmware update selected, immediately connected, beeped, and invited me to update. All up to date now. 👍📸
ARE YOU LOOKING FOR FIX TO GET TO 1/256??? My trigger was only going to 1/128, but to get to 1/256 I just needed to change the range in the Menu.
Menu>Step>1/256.
Now I can adjust my AD600pro to this step with my R2 Trigger.
I still haven't been able to figure out the installer and it recognizing my trigger. Also mac options on in the F3 installer are limited. Terrible support on this product. Perhaps I have the R2marki model which doesn't seem to have an installer for Nikon.
Thanks Alex. Clearly explained.
E9 Firmware error, with Godox G2 software and version 2.0, with flahspoint 1.8 1.4 nothing error persists
Hi, I just purchased a Godox AD400 PRO and AD600 PRO + 2 XPro Flash Triggers (for Nikon and Canon as well). While the Nikon system is working flawlessly, I have a problem with the Canon R5, where the lights are not responding at all. Both lights are working fine when I'm using the remote's test, but when I'm pressing the shutter, the pictures are taken, but the lights are not flashing. What I'm doing wrong? Should I modify something in the camera menu? The Lights are both set in channel 1, group A and B, respectively. Using precisely the same settings, Nikon D850 doesn't have any issue controlling the lights... simply can't understand what's going on... Any ideas?
Alex, I use the Godox system: XPro for Nikon and AD200 moonlight. I also have a Godox speed flash for backup. Do you notice any color shift with your Godox xPro? I understand it is a know problem with triggers. I heard about using a single-pin flash adapter between the hot shoe and the xPro trigger. I've used this setup for 2 years, but I just bought a Nikon Z50 mirrorless. And for some reason, the flash won't fire with the adapter on my Z50, but works fine on my D7100. Comments?
Hi, please how can i setup the autofocus assist beam on my fuji xt100? I am using the xpro f
You can't, mirrorless cameras don't support that feature, not just Fujifilm, any brand in regard to Mirrorless. It has to do something with the infrared light not being able to be seen by the sensor.
I’m lost. They make this ridiculously complicated. I’m trying to update my x2t trigger to the latest version and my Mac doesn’t recognize the trigger. No matter the cable, etc. I guess I’m stuck using an old version. If anyone has any help, I’m flustered about it and could use any guidance.
same problem
same
My manual says to use the F3 firmware, but the update says to use the F2 firmware????
When I turned on the trigger it says E9 firmware error.
Pls can the godox xpro n work with godox do300 strobe light
Hello Alex.... Display of my Godox xpro trigger goes blank when I use it out doors in day light. However...no change in performance and It still triggers flash. What could be the problem? Can you help me out. Thanks in advance
my XPRO S shows v1.4 as the installed version. is this the most up to date version, or do i need to go to V1.3? im not sure i understand since most versions go up as in 1.1, 1.2 , then 1.3 etc. so which one is the most up to date?
I have bought my FLASHPOINT R2 PRO II (Nikon) from ADORAMA over a year ago with Ver.1.4 installed...
Would help if you were to add "using a PC" to your title.
Holy f*ck. Way to make a 1 minute process way longer than it needed to be.
thanks for this - godox support pages are crap
No Mac firmware upgrade option😡
I'm afraid Godox doesn't offer the option :-(
I just bought this trigger for the AD200 pro with my 5D mark iv and it won't HSS - I've tried to update the software but it won't work with Mac Monterey!! wtf
no help at all!