How To Fire a Godox TT600 Remotely With An XPro
HTML-код
- Опубликовано: 29 июн 2024
- In the next video of this series, I share how to sync the Godox XPro transmitter with a Godox TT600 flash. These instructions also work for a Godox V850II. Keep watching to learn how.
#offcameraflash #photography #godox
0:00 Intro
0:52 TT600 Setup
1:09 - Radio Slave
2:04 - Choose a Channel
2:57 - Choose a Group
4:05 XPro Setup
4:25 - Set Channel
5:02 - Select Group
5:24 - Change Group Mode
5:57 - Set Group Power
6:25 Simple Test
7:01 Camera Test
8:05 Outro
You can also find me at:
www.alexsilva.photography/
/ alex-silva-photography
The gear mentioned used in this video is the following:
Godox XPro/Flashpoint R2 Pro Transmitter
adorama.rfvk.net/x9L1BO (for Canon)
adorama.rfvk.net/4e5gB1 (for Nikon)
adorama.rfvk.net/BXKWm4 (for Sony)
adorama.rfvk.net/9vreE (for Fujifilm)
adorama.rfvk.net/zajQZ7 (for Micro 4/3)
adorama.rfvk.net/WDYjWn (for Pentax)
Godox TT600/Flashpoint Zoom R2 Manual Flash
adorama.rfvk.net/DV0mQ5
Make sure you subscribe to the channel!
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting this channel so I can continue to provide you with free content each week!
Man, I use my speed lights so little that whenever I have to use them I refer to these videos for a quick crash course on how to connect my units.
Thank you so much ! Alex.
Simplest instructions I have found. THANK YOU!! 🎉
Many thnaks, Alex, for this video.
Great tutorial.
GOD bless you.
Very useful Alex. Thank you so much. Very simple and Clear!
Thanks so much Alex. I'm now working on them smoothly ✊👍💯
I just got this exact combination and I'm glad this video exists. You just got me up and running. Thank you!
Coincidcentally, I've both of those GODOX units in my Amazon cart - and now I've found the PERFECT tutorial on how to marry them !!!
How timely! Thank you.
the first step going to slave saved me lmao thank you
Great Video, Im so happy I made it, seens so complicated but you made it easy
Useful information, thanks.
Very helpful. Thank you.
Thank you so much! Such a clear video, the instruction manual was so confusing!
Well done on your videos...have both TT600 and XPro.
THANK YOU, THANK YOU, THANK YOU! I have been fighting with this for two days and finally I found you and your simple your instructions did the trick.
This was 100 percent helpful
Alex, Gracias ! Exactly what I was looking for,
Thanks for the time and effort you spent making this video. I have been trying to sync the equipment for hours.
The explanation is excellent and step by step! I had forgotten the slave mode. This helped me resync. Many thanks Alex
Thanks for your step by step help Alex. I was forgotten to switch to Slave mode, but thanks to your video it is working fine now!
Excellent video!! Thank you so much!! That manual was for the birds!! I had this set up in no time .. thanks to your help! Following for future tips and videos!!
Thank you so much sir ❤️❤️❤️ your video is very helpful 💐
you just know how to teach, i appreciate this video as a beginner
Thankyou so much, very well explained
Always happy to help! :-)
Thank you a lot! 🙏🏻 Really really helpfull
Thank You !😊
Thanks for this. I couldn't figure out how to connect my XPro-S to my TT600. It had to be in S mode. The instructions don't mention that. Appreciate your kindly advice here. I can't wait to photograph bees next spring with this little flash!
Thank you!
Thank you 🙏🏽
Thank you so much fo this video. I really needed it. God bless bless
Glad it was helpful!
God's blessings shine upon you ❤️❤️💐💐🙏🏻 it helped me to know how to work on the setting
This saved my day today
Thanks!
Thbak you So Much jst Got Employed Now🎉😂😅
Thank you so much ...🙏🏻
Thanks a lot 💗
very helpful! thank u
Glad it was helpful!
Thanks 😊
Thanks
Thanks I wanted to make sure the tt600 is compatible with the xpro trigger
Alex could please answer a question that I can’t get answered? I want to pair a Canon 580 ex ll on a Godox X2t with my Godox XPro so I can use it off camera, is it possible if so how, please help. I like your videos, very well explained.
does the speedlight's red part directly need to be visible to the transmitter for it to work ? im thinking of buying transmitter only for rim lighting where the speedlight is behind the subject covered by a foam board
can you use ttl with tt600 if you have the remote for specific brand of camera?
can i use more than 180 above? I have x-e3 with xpro and tt600. But I can't use above 180 shutter speed.can u explain me why?
I followed the set up and my xpro and tt600 failed to sync. Please advise thanks so much chelle
Hello Alex, and thank you for such a great video, do you have a sugestion for my Godox Xpro-N?? it won"t trigger my flash unless I am in front of it or a special angle, I did change on setting the distance from 0-30 to see if there was going to be a difference but same results, also my batteries wont last, I was using a set of 4 NI-MH and then got a set of 4 Alkaline with same result as well, just got that Xpro from an online store less than 3 days ago, should I replace the unit?? thanks in advance.
I have the same issue. Just bought two TT600 and my XproN won't trigger them
I've found the solution 😀 Took me few minutes.. On your XProN go to Menu and then scroll down to ID, press Set and change the whatever the number you have to OFF. It works for me now, I can trigger and change settings remotely on my TT600s and AD200 Pro 😀😀
👍🌟 If I use Xpro, my TT600 will act like a TTL one? 👍
Hey I have a Fuji x100v, Godox tt600 and the xpro abut in having an issue. I set it up exactly as shown and when I click the test button it flashes but when I click the shutter it doesn’t. What am I missing? I feel like it’s obvious and I just can’t tell 😅
Same here.
Hi there! Thanks for the question! I don't have a Fujifilm x100v to reproduce your issue, but according to this video that I found (ruclips.net/video/wD0mjdWZCSU/видео.html) you need to enable the flash in the camera menu.
That would be my first step to debug your problem. Please, let me know if you get it to work.
So the zoom settings is all manually done ? I tried to change zoom settings from my Canon EOS M50 display panel from camera. But it doesn't make any changes in flash. And i have not yet upgraded the firmware of my godox x1T 2.4G C.
Yes, the zoom setting is done manually, as is everything with the TT600
Sir i have a godox tt600 + godox xpro but hss not working
Please upload this topic video
Has anyone ever told you that you sound almost exactly like another photography youtuber, Mattias Burling?
Damn wasn't that easy! Have two TT600's and upgraded to the XproN for another light and my brain just wasn't working out the issue.
Yes that works I have the same gear however the zoom function does not work between the 2 godox flashes and there is no updates available for this I could find last night may 1 2023
Thank you!
Thanks!!!!