Watch Next 😎👇 ✨ How to Create Multi Layer Designs in Silhouette Studio ruclips.net/video/NmtmMle2LcQ/видео.html 🔥 All About the Knife Tool in Silhouette Studio ruclips.net/video/X7WVKOFmEvc/видео.html 🥰 All About the Offset Tool in Silhouette Studio ruclips.net/video/HrfPtEAIQC4/видео.html
I don’t even have to watch the tutorial to “like” one of your videos! I just go ahead and give you a thumbs up before viewing. Always look forward to learning something new with you, thanks Becky!
Becky, just came here to say THANK YOU for all you're doing. Yesterday my Cameo 4 arrived and just because I saw almost every episode with you, I was prepared to make almost everything myself, withour any help. Thank you for your great job, for your smile and positive energy. Greets from Poland!
I have been trying to get the picscan mat to work for 5 years and have had very little success. Thank you so much for this hack.......never work with the picscan mat again. This is a true winner.
For those who have upgraded their Studio to Designer or above -- you can use the Warp feature on your photograph image to true up that distorted perspective. Select a Warp Template that represents a vertical trapezoid.
wow Becky..you are super duper amazing! I always learn something new about silhouette software and makes me excited to try to re-create what you did. thanks a bunch. virtual hug 🤗
Absolute love this. It has taken me a week of full days of struggle to get to this point. Which point is that? Well 2.5 days of getting phone to calibrate and photo to upload to program. Then 2.5 days of trying to get my Cameo 3 to read registration marks on pixscan mat, watching tons of RUclips video's and several of failed attempts. My mat runs out at the back when it scrolls down to read bottom marks. Any ideas? Running business edition.
This is wonderful! Could you direct me to know how to know where it going to cut? I placed adding on the far right edge, selected the correct material size and the blade went 1 1/2” off nearly to the side of the machine! It doesn’t ever seem to cut where I place it on the screen.
Hey Jemstone, it sounds like the alignment is off on your machine. I would turn the machine off, then move your blade housing all the way from one end to the other a few times. Finally, just move it all the way back to the very left-hand side, and turn your machine back on. Hope this helps! ---Becky
Absolutely Verena! You can do this with any material, I just recommend keeping to the same type of cut settings (smooth HTV for example). Once you start mixing in other types (flocked, glitter) it gets more complicated. Hope this helps! ---Becky
I thought Pixscan is for images you don’t have an outside cut line? For to make stickers or to cut out special items that were printed with unusual shaped. Otherwise, I just put the squares in different corners and one in the middle same on the screen the same on the sticky mat and I haven’t had a problem.
Hey Paula, PixScan mat definitely has lots of uses, this is just one easy example. I don't think I would use this method for something as exact as stickers since those are usually small, but I also use this for unusual shapes and such. Hope this helps! ---Becky
Watch Next 😎👇
✨ How to Create Multi Layer Designs in Silhouette Studio
ruclips.net/video/NmtmMle2LcQ/видео.html
🔥 All About the Knife Tool in Silhouette Studio
ruclips.net/video/X7WVKOFmEvc/видео.html
🥰 All About the Offset Tool in Silhouette Studio
ruclips.net/video/HrfPtEAIQC4/видео.html
I don’t even have to watch the tutorial to “like” one of your videos! I just go ahead and give you a thumbs up before viewing.
Always look forward to learning something new with you, thanks Becky!
Becky, just came here to say THANK YOU for all you're doing. Yesterday my Cameo 4 arrived and just because I saw almost every episode with you, I was prepared to make almost everything myself, withour any help. Thank you for your great job, for your smile and positive energy. Greets from Poland!
I'm so happy to hear that! Sending my love to Poland and best of luck with your crafting, I bet you will create masterpieces! ---Becky
I have been trying to get the picscan mat to work for 5 years and have had very little success. Thank you so much for this hack.......never work with the picscan mat again. This is a true winner.
For those who have upgraded their Studio to Designer or above -- you can use the Warp feature on your photograph image to true up that distorted perspective. Select a Warp Template that represents a vertical trapezoid.
wow Becky..you are super duper amazing! I always learn something new about silhouette software and makes me excited to try to re-create what you did. thanks a bunch. virtual hug 🤗
OMG this is exactly what I've been searching for Thank You soooo much
Game changer for sure!
This is a great hack! Thank you for sharing your talents!
Awesome hack! It's possible to turn the feet at a 45 degree angle so they won't be so close to the edge.
Absolute love this. It has taken me a week of full days of struggle to get to this point. Which point is that? Well 2.5 days of getting phone to calibrate and photo to upload to program. Then 2.5 days of trying to get my Cameo 3 to read registration marks on pixscan mat, watching tons of RUclips video's and several of failed attempts. My mat runs out at the back when it scrolls down to read bottom marks. Any ideas? Running business edition.
I would double check your rollers are locked completely.
So cute 🥰 cute 🥰 thank Becky.
So cute! Appreciate your great tutorial! Thanks 😊
You are so welcome! :)
Just clicked RUclips. And you posted as my app loaded. Lol.
This is wonderful! Could you direct me to know how to know where it going to cut? I placed adding on the far right edge, selected the correct material size and the blade went 1 1/2” off nearly to the side of the machine! It doesn’t ever seem to cut where I place it on the screen.
Hey Jemstone, it sounds like the alignment is off on your machine. I would turn the machine off, then move your blade housing all the way from one end to the other a few times. Finally, just move it all the way back to the very left-hand side, and turn your machine back on. Hope this helps! ---Becky
Thank you! I’ll give it a try!
@@DesignBundles It worked!!!! Thanks! I think it happens when I freak out and turn off the machine when its cutting wrong, in the middle of cutting...
Shoot, I've always just measured and counted grid lines! 🤣
Me too!! 🙈🙈
Thxs for the video!
Can this method be used for doing something like the Gnome using HTV?
Absolutely Verena! You can do this with any material, I just recommend keeping to the same type of cut settings (smooth HTV for example). Once you start mixing in other types (flocked, glitter) it gets more complicated. Hope this helps! ---Becky
Mahalo much... appreciate you
Thanks for watching! 😊
Love love love ❤️🇳🇱
Thank you! :)
I thought Pixscan is for images you don’t have an outside cut line? For to make stickers or to cut out special items that were printed with unusual shaped. Otherwise, I just put the squares in different corners and one in the middle same on the screen the same on the sticky mat and I haven’t had a problem.
Hey Paula, PixScan mat definitely has lots of uses, this is just one easy example. I don't think I would use this method for something as exact as stickers since those are usually small, but I also use this for unusual shapes and such. Hope this helps! ---Becky