I wondered why MUTH (signal mirrors) charges so much for their mirrors. Lot of detailed work. BTW: 3M Double-Stick tape sticks A LOT better if you hair dryer warm up the sticky tape after 1/2 installing it. Once you even touch it, IT'S PERMANENT. Start over if you mess it up.
JB Weld is king again. ^_^ I also use the same 3M sticky for hood ornaments. Don't ask me why, but someone hijacked my wife's SL2 hood ornament. Got a replacement and used the same sticky stuff to tack it on.
Miguel Rivers translation: i just saw your video and you are a genius.i congratulate you. Verry instructional step by step. i hope to know more about you. keep doing what your doing greetings from PERU. ME: your welcome 😂😂
I would like to do this to my 2002 Hyundai Sonata GLS but just as I went to buy the LED markers I read something saying that not all vehicles have Translucent Mirrors. Will my mirrors work? Are they Translucent? Can I install this on my car? Please respond and I LOVED THE VIDEO! Great Job!
Hey man I cant seem to be able to take the mirror glass out and I'm scared to break it. Any other tips? And I have a 2008 Silverado (nonpower side view mirrors)
rich, if your mirrors are electric why do you need to run your power wires from the new LED indicators vs. connecting to the hot and ground wires for your mirror? Thanks. these 2 videos are detailed.
That's an eye opening demo -- lots more work than I expected.
You got waaayyy more patience than I do Rich! I would've slung those things across the shop when the wires broke!
This was the correct way to do this.. Very clean! Thank you for uploading this video I’m going to fallow all of your steps to do mines..👍🏼🙏
I wondered why MUTH (signal mirrors) charges so much for their mirrors. Lot of detailed work.
BTW: 3M Double-Stick tape sticks A LOT better if you hair dryer warm up the sticky tape after 1/2 installing it. Once you even touch it, IT'S PERMANENT. Start over if you mess it up.
Oldies, but goldies. You're a master. Learned a lot from this tut vid.
Still good info 12 years after the fact 👍
Over kill on the adhesive to stick the mirror back on. Double side tape and silicone. Sometime we over think things
JB Weld is king again. ^_^ I also use the same 3M sticky for hood ornaments. Don't ask me why, but someone hijacked my wife's SL2 hood ornament. Got a replacement and used the same sticky stuff to tack it on.
Awesome!!!!!!!! This is exactly what i was looking for. Great job Rich, thanks alot!!! Can't wait for Part 2
Can't wait to see how this turns out!!!
Yes it is 33-SMD-1210
Thanks for the video..... now I know how to do this to my car.....
acabo de ver el video y te que eres genial. muy instructivo tu video te felicito y espero saber mas de ti. sigue así saludos de aca de PERU.
Miguel Rivers translation: i just saw your video and you are a genius.i congratulate you. Verry instructional step by step. i hope to know more about you. keep doing what your doing greetings from PERU.
ME: your welcome 😂😂
This is certainly dicey work. Very clean but you can surface mount these things in two seconds and be done with it.
Can the heating element be cut throughin the arrow shape and still work where uncut?
Nice work around (pun intended), putting the arrow on the backside.
hey could you possibly show how to do a wheel bearing on the saturn?
I have a 2015 Ford Escape The mirrors are a little power you just the mirrors but will this work
Nice work so far.
It should work for most vehicles.
I like how you did you mirror i trying to do my chevy mirror please help me
Please call me 212.470.4714 jermaine I need so help 😭
Sir, Does the back surface of the mirror require any modification in order for the light to shine through? Thanks.
I have not worked on the power mirror so i can not tell you how much the motor will interfere with this mod.
It should be up 9:00am et tomorrow.
Great video rich . Would this work for any car . I have a Hyundai Elantra and it's got lower mirrors . Do u think it will work ?
I was doing that stuff back in the 70s and 80s
Not with today's leds you weren't.
I installed those recently, but it is mad after starting the engine. could you tell me how I can fix the problem? Come on in please...
Any tips for doing this on glass with heating element? Looks like I need to sand some of the element off otherwise no light can get through..?
3years late but there you go.
How did you get on? I'm about to take this on with my astra
He sounds like Peter Griffin ..... "they have no phone number"
look at u rich installing goodies on cars now! nice!!! u should do vids on performance things such as turbos nd superchargers
I would like to do this to my 2002 Hyundai Sonata GLS but just as I went to buy the LED markers I read something saying that not all vehicles have Translucent Mirrors. Will my mirrors work? Are they Translucent? Can I install this on my car? Please respond and I LOVED THE VIDEO! Great Job!
@richpin06a you got MADF soldering skills hahaha. that awesome dude.
LOL! "MAD SOLDERING SKILLS" Cool Cat@!
i own an sc2 with power mirrors would it be pretty much the same
I'm thinking about making my Saturn 1998 SC into a show car... Would you know any great body shop websites or anything like that?
I didn’t come with me or signals
Hey man I cant seem to be able to take the mirror glass out and I'm scared to break it. Any other tips? And I have a 2008 Silverado (nonpower side view mirrors)
I have a 2008 350z will it work on them?
you wouldnt happen to have a part number from those would you?
hello , what is the name of the black glue that you used .
JB Weld
Thank you for the number.
rich, if your mirrors are electric why do you need to run your power wires from the new LED indicators vs. connecting to the hot and ground wires for your mirror? Thanks. these 2 videos are detailed.
That is something to think about.I wounder how much extra load it would put on that circuit.
+Roger Spence If you wire it to the mirrors, how is it supposed to flash the arrows? You want to have it wired to a turn signal feed.
COOL!
No it does not.
This guy sounds like manny from ice age 🤣
you should start videos off with the finsh product workin for like the first 20 seconds.
Anyone tried this on a frontier
JDM???
i thought it was an easy install.. huhuhuhu