Opening & Resealing Automotive Headlights using Morimoto Retro Rubber
HTML-код
- Опубликовано: 9 май 2016
- Link to sealant:
lightwerkz.net/collections/bu...
Check out the selection of upgrades for your vehicle at www.lightwerkz.net
Lightwerkz specializes in custom automotive lighting upgrades for all makes and models. We offer the best brands in custom automotive lighting and also offer services to customers all around the world.
Contact us today for additional information.
Phone: 201-644-0337
Email: info@lightwerkz.net
Follow us on social media!
Facebook: / lightwerkz
Instagram: / lightwerkz 
Авто/Мото
2023! Still referencing this video! Great work!
i bake mine 190 for 15 min and it works perfect and safest, barely hot to touch
This is the be-all and end-all of headlight open and seal videos I have ever seen, given me the confidence to finally do my face-lift SG Forester XT headlights! Cheers from Australia!
IMPROVEMENTS & positive feedback: The video was well done and helped me do both headlights in a Mazda CX-5. The only thing I would do different since I learned from the first one is to NOT warm the Morimoto for a few minutes, it got too sticky and stuck to everything I was working on, had to throw half of it away. The second is to use the cooled Morimoto but stretch it out to about half the original diameter. I know the video said to stretch it but the first one was still too thick since the original sealant was still a considerable amount. On my second headlight, I stretched it much thinner, heated it, then flatened it and it worked out perfect with a beautiful install. Thanks for the great video.
This is the 5th video I've watched today and FINALLY, a comprehensive, professional approach!. Much appreciated 👍
I’m ready to take on the battle of retrofitting now because of this vid. It’s so hard to find 8th gen Civic Retrofit guides and this one helped me out a ton!! Got a pair of badly done headlights and now I’m gonna get a kit to refresh them
Definitely one of the best retrofitting techniques I’ve watched on RUclips
Superb video!!! Details on what tools to use, time frames to work with and even do's and dont's! Just ordered a bunch of stuff from your website. Great prices and thanks for 10% and free shipping, really appreciate that! Definitely know where to go for my purchases from now on! Can't thank you enough for all your great RUclips videos, I've learned so much!
Thanks...great video. I just did my SUV and you video helped immensely. I used 215 degrees for 17 minutes and it seemed to be fine.
Thanks for this.. great, informative, simple, straight to the point!!
Just opened my headlights today and your video was the most informative. I didn't follow your directions to the "T", but mine came out looking good. A couple of things that I did like were the clamps and pushing against the wall which helped alot!
Team Lightwerks, Karl here in Denver. Thank you for taking the time to produce a really great video. Very helpful.
Man I love sealing and messing it up and then start all over lol. This process is hard to do correctly the 1st time. My gloves got the adhesive all over it and as I was handling the assembly the adhesive got all over the lens covers! Took a long time to figure out how to get it off. Tar and grime cleaner worked fastest but made sure to clean it off every 30 seconds to not damage the clear lens cover. Second time I did just like the vid! Didn't have clamps per se so I looked at my jumper cables and they looked like clamps..worked like a charm!
Best headlight bake video ive seen.
Just picked up some used black headlights. Have to open them up to polish the inside of the cover. Gonna follow this to the T.
Thanks!
I tried thinner to clean the excess of the sealant with a piece of rag. It works perfect.
Finally someone that know what he's doing! Thanks! Have you ever resealed BMW E60 headlights? Liked and subscribed
All the years I've been retrofitting and I've never ever seen this sealant. That's f*cking awesome! Prepping to get the lens back on can be a pain in the ass. This makes it so less stressful.
Very informative video. I am going to try my hand at a projector retrofit on my 99 civic and I feel much more confident after watching your video. Very helpful, thanx again.
Thank you for the video. I used this to replace the yellow and cracked headlight lens on the wife's 2008 Mitsubishi Outlander. Everything worked well except for when I left the Morimoto in the oven a little bit too long making it droopy and hard to work with. Did better on the second light. Picked up the lens for both sides from Ali-Express for $58. Huge difference.
Again, thank you
Excellent job very well done one of the best tutorial videos I’ve ever seen. Thank you.
This is by far the best video on the subject, you guys clearly know what your doing. Everyone else I've watched on youtube have pretty much been hack jobs in comparison. props
you have done it very simply and to the point, thank you.
Best tutorial for doing this type of thing, thanks for being thorough.
After reading some of these comments, I had to google joe rogan b/c I'd heard the name in passing but didn't have any connection other than that. Found his podcasts, and this sounds like him for sure! Great video. Helped me a lot. I went with the slow bake vs the 275 deg for 7 minutes as another video suggested. Worked great. I was able to pop the headlight open (2018 Fit Sport) and fit the new lens cover and reseal. I actually had to do it twice b/c of fingerprints on the inner housing so be careful. Looks brand new again. My previous lens cover had sustained a 2 inch gouge from a kicked up rock on the highway. I wanted to get it looking new again. Got the lens cover off ebay from China since Honda only sells the entire headlight assembly for several hundred. Used the info in this video except I just reused whatever rubber remained in the housing channel. To me there was enough in there already, and saved me the time and money from getting new rubber. Plus, there are several clips and screws holding it all together in addition to the residual rubber.
Great video but one thing I do differently is heat the housings before removing the screws. With older lights the butyl/sealant can be so hard you can snap the screws trying to remove them. If the sealant is warm it will give up the screws easier.
Very good tips, I just followed every step in my Infiniti QX70 and it worked 100%
About to try this on my JX35, did you do both sides? Only the driver side is leaky, wondering if I should do both preemptively.
BEST VIDEO I'VE SEEN YET BY FAR! VERY INFORMATIONAL AND WELL ARTICULATED. THANK YOU. 🙂💖
You guys are Masters at those headlamp housings!!
Hard work and great job! Thank you!
Super cool method to open up your headlights! thanks!
Thanks for the video, I really needed a legit tutorial on this.
Very nice & clean ! I will order morimoto retro rubber with my next order from you, now i am waiting for D2S 4.0 to arrive.
Great video man thank you I'll be using this next week on my days off.
Nice video! I just ordered the morimoto 7.0 stage 3 kit from you guys for my 15 si coupe, cant wait to install it!
Thank you!
great work and you're spreading your great work with world thanks a ton for this beautiful video stay blessed love from Pakistan
Best video by far I seen on how to retrofit any headlight
Best tutorial I have seen. Thanks team. Great job
Thanks guys this saved me spending $1500 on complete assembly. Was able to fix it under $200
Great video. Shows steps, yeah... Explains reasons! Wish I would've found this video earlier. 2nd 7.0 swap is gonna be much fasterer (doing 1 headlight at a time to stay legal). Hindsight being 20/20, I'll smooth out the factory butyl while it's still hot. Thanks again for an INFORMATIVE video!
Just a very well done demo. To re-assemble I used a tube of Liquid Nails. Worked great!
Wow!
Very detailed and project looks great. I will be using these steps when doing my sequential led strip. Thanks.
How did that go? Is it safe to put it in the oven with the led strip?
Did you remove the led strip or it went in the oven alright?
Awesome.!! I am going to retrofit my headlights by next week! (Home DIY). Great video. !
Wonderful tutorial exactly what I was looking for this is how the professionals do it
Really professional job and demonstration.
Best vid I've ever seen. Thank you
Thank you, thats why we do it!
Is there a trick way to level the projectors before install? ie the grid on the reflector bowls, are they parallel to the ground. could u use those as a guide to align the projector?
ruclips.net/p/PLRtSL67o6XZ7qoO8LEypVtJcEs2Wc2iQ6
Great video
What about original xenon lights with wiring and control module inside. Is there any risk for internal unit or wiring if i place it in the oven? Now I'm speaking about European Škoda Octavia II gen (VW concern)
I used 200°F @ 25 min doing a set of Miata NB lamps and it worked fine for me.
Great video, just managed to locate a supplier here in the UK, as I was searching for information how to do it. Without this video I would probably have tried resealing them with silicon sealer, thanks.👍
Have any sealant left? 😊
man, this is an awesome video. the information is delivered clearly and he is very well spoken. surprising to find someone who can multitask so proficiently. good job
Thank you!
@@LightwerkzGlobalis it 240 degrees Celsius or Fahrenheit please?
240F@@jonjeny
@@LightwerkzGlobalyou're a legend, thank you.
Хорошее наглядное пособие по перепаковке автомобильной фары.
Real clean job buddy congratulations
This was a great and informative video!
The best video about this on youtube
Excellent video, very detail oriented and informative. Thanks
Thanks Paul!
Triple thumbs up bro! Awesome tutorial!
This is amazing work, thanks.
Great video! I admire your patience with all the redundant questions that you had to answer over and over. You would think people would look through the descriptions provided, the comments and replies before asking the same questions that are covered over and over.
Thanks for the great information.
this is the best video on the internet in this matter
Fantastic video Thanks guys !!
Great vid thanks! I'm doing m7 07 Subaru Forester with the crappy sealant so it's all going to come out, otherwise I'm doing exactly what you've said here mate. Thanks for doing this vid.
great tutorial. One question though, why not wait for the do dry up and trim it with a blade? or does it stay soft?
Thanks for sharing
Really detailing, really helpful, thanks for share dude
honestly an excellent video if youeve ever had to do this. thanks.
Thank you guys for the excellent video!!!!!!
Would I be able to ship a headlight to you and pay you guys to reseal it for me? I can of course pay for it to get there, and back. That would be awesome.
Great vid. Had to change my lights from RHD to LHD. 2k per light no way buy new ones. Sent the video to my mechanic. I break everything.
I've just taken apart 2 Audi TT headlights to make 1 good one from 2 damaged ones.... I was wondering what to use to reassemble the good light, now I know what to order👍😎
Very helpful! Thank you.
Great video tutorial thanks for sharing...
Hey, do you guys have experience retrofitting E60 BMW 5-Series head lamps?
Beautiful tutorial! Such a professional!!! Thanks Ceasar!!!!
Great job thanks for this video
extremely helpful vido thanks
I'm going to do my frontier headlights paint the chrome border lines red and reseal it. thanks for this video.
Great and helpful video.
Great video !!
Saved video! Thanks.
Great video 👍🏾
Wow! Amazing 👏
Thank you, I was looking at a $800 - $1200 price point to replace my headlight, this is a more affordable option just to change out the cover that was cracked.
Thank you!
Well done video !!
I was a little shocked to see you guys place the headlight directly on the oven rack. I usually just put some wood to be on the safe side. Cardboard seems to me like a fire hazard. Great video! Now just gotta get some retro rubber...
Geat video guys thank you!
Great video - any tips on opening a 2015+ Tahoe light? tried but no luck
Very well done DIY 👏👍
What projectors were used to do that retrofit?
Have a link?
Keeping the clamps on only secures the fixing with the glue. Once clamped in, put it in the fridge for quicker cooling off. That’s my opinion ✌️
Thank you fr the video
Best video what glue to use to stick the led tube light
Thank you so much
Great vid
nice job, i would like to aske if there is any risks to heat my headlight with aLED strips inside maded few mounth ago? i want to re-open it for clean inside i had a lot dirt and mould formation! and thx for your answer
240 @ 20 mins is perfect! I used a temp prob in my BBQ and used a single burner to hold temp. Thanks!
Great video !!!
Could the transparent cover be fabricated in a DIY way ?
Does this process apply to most tail lights as well?
great video!!
I am thinking of putting a big pot on a stove in the garden and immersing the light in boiling water.What do you think my chances are of this working?
Can keep putting it back in to maintain 100 Celsius,you are only at 115 with the oven.
Thanks!
Fantastic Video 👍🏻👍🏻👍🏻 🇺🇸
Thank you
Wow!! What a video!! U guys r awesome.. I'm a newbie and I'm not looking to buy another headlight. So any thoughts on doing a vid for a 2004 ls430 headlight?
Would non hardening silicone work to seal it back up?
great video