How to Super Clean Your Windshield with Steel Wool
HTML-код
- Опубликовано: 2 окт 2024
- It sounds crazy but rubbing STEEL WOOL on your WINDSHIELD won't hurt it! Laminated windshield glass is higher on the MOHS scale of hardness than steel wool, so it won't scratch.
FEATURED & RELATED PRODUCTS AVAILABLE ON AMAZON:
0000 Steel Wool: amzn.to/2DYPgur
Rain-X Glass Treatment: amzn.to/2nBMTqy
Invisible Glass: amzn.to/2nBMIvq
Invisible Glass w/Rain Repellent: amzn.to/2EexCXa
Microfiber Cloths (lint-free): amzn.to/2DYPyl1
California Duster: amzn.to/2s1UDaK
Original Water Blade: amzn.to/2E9cmSv
Mequiar’s NXT Tech Wax 2.0: amzn.to/2EzoRVl
Meguiar’s Quik Detailer Mist: amzn.to/2E05WBM
RECENT & RELATED VIDEOS:
Super Clean Windshield Super Fast: • Super Clean Your Winds...
Start a Fire With Steel Wool: • HOW TO: Start a Fire w...
Stopping a Windshield Crack: • How to Stop a Windshie...
Environmental Window Cleaning: • Clean Your RV Windows ...
Annual RV Cleaning & Maint.: • Annual RV Maintenance ...
Headlight Restoration: • Headlight Restoration ...
THIS VIDEO mentioned on BBC!: • Super Clean Your Winds...
RV Windshield Replacement: • Motorhome Windshield R...
We demonstrate how to make the windshield of your RV or car cleaner and clearer. We'll show you how to improve the clarity of the glass and improve visibility.
After a little time goes by, every windshield gets a little hazy. That goes double for autos that are towed right behind a large motorhome. Using our toad (towed car), we show you how to use fine steel wool, Rain-X and Invisible Glass to make your view just a little bit clearer.
Although our car's windshield has a lot of little nicks from over a decade of being towed behind our motorhome, we still want to keep it as clear as possible. Regular washing can't remove the fine dirt that gets into the pores of the glass, so we use a little detailer's trick that we learned years ago: 0000 steel wool. While you'd expect that steel wool would scratch the glass, it's exactly the opposite. Just like furniture makers use extra-fine steel wool to rub out the surface of the wood after each coat of stain, it polishes glass the same way.
NOTE: We use extra-fine 0000 steel wool in this video. It's EXTREMELY FLAMMABLE, so exercise care in storing and using it.
UPDATE: A viewer wrote to say that he experienced some areas of scratching after trying this. I've never heard of it scratching before, so I just did a little Googling, and while there seem to be some people who question using steel wool, others swear by it. Some also think you should never us a razor blade on glass, and others do it all the time. One suggestion was to use wet steel wool (of course it will then rust, so pitch it afterwards). Another mentioned buying something called "Poli-Flex Rubberized Clayblock" for cleaning. Although I cannot guarantee that scratching is impossible, many people who've tried steel wool since seeing this video have been thrilled with the results. Either way, proceed slowly and with caution and at your own risk.
The piano music is my own performance of Scott Joplin's Maple Leaf Rag from 1899.
WONDERING WHAT'S THE BEST GEAR TO USE ON YOUR RV?
Here's all of our favorite equipment that we use ourselves and recommend to friends:
thervgeeks.com/...
Join us at TheRVgeeks.com for more great RVing content!
Full-Time RVers since April, 2003, we share DIY (do it yourself) RV maintenance, repair, travel, upgrade and operational tips & tricks.
Many RVers are eager to learn more about using, maintaining and caring for their rigs. We hope our experience can help others go DIY, saving time & money, plus the satisfaction of a job well done.
We're handy RVers, not professional technicians. We're happy with the techniques and products we use, but be sure to confirm that all methods and materials you use are compatible with your equipment and abilities. Regardless of what we recommend, consult a professional if you're unsure about working on your RV. Any task you perform or product you purchase based on any information we provide is strictly at your own risk.
We sometimes receive products for evaluation at no cost, and The RVgeeks participate in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. But our opinions are our own, you won’t pay an extra penny, and we only link to products we personally use, love and can recommend to friends with complete confidence.
Comments welcome! Thanks for watching! Don't forget to subscribe! #RVLIFE #RVDIY #RVLIVING #FULLTIMERV #RVREPAIR #RVMAINTENANCE #RVMODS #RVUPGRADES #RVTRAVEL #DIYRV #RVGEEKS 
Авто/Мото
![SIMPLE SOLUTION! How To Deep Clean A Windshield and Repel Water [DIY]](http://i.ytimg.com/vi/_Dyk5KIq7P0/mqdefault.jpg)
![SIMPLE SOLUTION! How To Deep Clean A Windshield and Repel Water [DIY]](/img/tr.png)
@Dawn Key Balls 0000 steel wool is not as hard as glass, and will not scratch it at all. It cleans really well, and we find it to be a quick, inexpensive and effective way to polish the glass.
+RVgeeks Hi. Great video! I have also had a lot of luck with an automotive clay bar and a spray bottle of water instead of steel wool. Seems to work pretty well. I'd love to see how you think it compares. The only advantage i can see, is if you accidentally run the clay bar over the plastic or rubber surrounding your windshield there is no chance of a scratch.
+RVgeeks For those who think steel wool will scratch glass, I'm reminded of Brillo or SOS pads being used to clean Pyrex glass baking pans. Not an ounce of damage was done to the glass.
+wannawatchu66 thanks. I was worried little bit about scratching the windshield, until you made the point about scrubbing glass dishes without damage
juck huo
Sure thing.
+RVgeeks Won't a piece of clay bar do the same as steel wool?
I'll be 81 next month. I love the Internet because of opportunities to learn.
This site is impressive.The forum is informative & funny.
SAME HERE I LOVE LEARNING ONLINE !!
still young. nowadays, people live longer than before, so you'll probably live up to 110+
This was a good tip. I cleaned my 12 year old pitted windshield with the recommended steel wool and the results were amazing.
@@truthrock9548 he's already passed away. 😩😩
@@captainamericaamerica8090 Are you sure? Ho do you know?
I washed my car twice and the rain stains would not come off . I came across your video , then went to my local Ace hardware store to buy this Steel Wool. It works great , and I’m in shocked . Thank you so much bro 🙏🏼✊🏼
I tested on rear window. Can't truly believe everything you see on the internet. I'm a believer. It's like new
This is one of the best DIY videos I've watched. Very thorough, articulate and well described! I know just what to do now and will try it out!! Thank you for this great fix!!
I actually discovered this trick by accident when trying to clean up an old toaster oven.
I was using super fine steel wool to remove a few stubborn stains and decided to try it on the glass as well since it was a cheap old appliance.
It worked so well for that application that I figured I'd give it a go on my windshield. Florida windshields tend to have a lot of hard water spots around the edge of the wiper tracks. I was pleasantly surprised by the results.
Now I keep some steel wool handy for any stubborn, dirty glass in and around the house.
I worked in autobody for years and this is what we used to make car glass as clear as the day it was new. 0000 steel wool (4 ought). ONLY four zero steel wool. Not 3 or anything else. We also used an old style razor blade, the one sided kind, to scrape off tough to remove stuff, at a 30-60 degree angle off the glass. Obviously you don't use it as a cutting blade, but a scraping blade only. And yes clean the glass first with a hose or water to remove as much dirt and grit as possible.
Wow thanks. I knew about steel wool for chrome but never even considered it for the glass. I also stoped using rain x because it was a pain to remove....a damp cloth it seems so obvious yet it never dawned on me. Lastly invisible glass is a staple in my home as well. Thanks for the info.
Steel wool destroys chrome. Use brass wool it's much softer...
Just a thought. I used to work in the antique and repro furniture industry, we always used 0000 steel wool for cleaning glass and polishing wood, never scratched any surface. Considering the price of this type of furniture you wouldn't want to ! I even use 0000 for cleaning the ceramic hob, gets even the most stubborn marks off.
Thanks for sharing that!
Amazing! I almost got in an argument with my partner over using this on my new (to me) Cadillac Deville & I refused to try it for fear of scratching. All of the windshields had water spots so bad it was nearly impossible to see through. Finally after nothing else I tried even touched it I gave it a try & Wow! You can see everything come right off as your scrubbing with no scratching at all~ Thank You! :)
Alex Sanford
Excellent. I have been using 0000 steel wool for a long time on my windshields however I have never used it dry. I like your way better because the steel wool will obviously last longer. I wasn't sure it could be done dry safely, now I know,...thanks. During rain storms on the interstate I rarely have to use my wipers.
Steel wool is an abrasive, and it will create swirls in the glass over time, even if you don't see it immediately. Add to that the stones that hit the windshield as a natural part of driving, and you will cause your windshield to deteriorate at a greater rate than necessary. It is MUCH better to use brass wool (available at boat supply stores), which is far less abrasive. It also doesn't leave tiny pieces of steel wool on the windshield, which rust and leave rust stains on the windshield that are difficult to remove. The brass wool doesn't leave anything behind that will rust. Additionally, if you have milky residue left by rain-x, use wet cheesecloth to remove them. It works better than a wet cloth. In wintertime, if you live in a cold climate, use regular wax on the windshield instead of rain-x, because it will make ice and snow much easier to remove. You will have to use the wax more often than rain-x, but it will provide the same benefits that rain-x does - like water beading up and rolling off the windshield, and it will lubricate the rubber blades on the wipers better than rain-x does.
WRONG!
I like that idea with the brass wool
Before you steel-wool your windshield, first clean it as well as you can with glass cleaner! The steel wool won't harm the glass, but there could be grit in the dirt on your windshield that WOULD scratch the glass. He tells you not to do it but I would recommend pre-cleaning the glass first.
+John Schulien this sounds legit so i agree
+John Schulien kill 2 birds with one stone, use glass cleaner while you use steel wool,I would never use steel wool dry like this guy did .13 years as a professional car detailer
I do stained glass restoration, and my procedures are designed to clean the glass in a way that minimizes the risk of damaging the glass. The purpose of cleaning first with glass cleaner is to get anything off the glass that might be harder than the glass because the steel wool might drag it around and scratch the glass, even if you wet the steel wool with glass cleaner. I mean, if you're detailing the windshield, why would you not soap and squeegee it before you do anything else? You can certainly use wet steel wool first, but using dry steel wool really gets the surface clean and is safe provided that the glass is cleaned before you use it.
the cars are fully washed before the glass and paint is clayed or steel wooled, Id still never use any abrasive on glass without something to lube it John Schulien
+shredBucketheadshred Steel wool is cheap. The only reason to not wet clean the glass with the steel wool is because you're cheap as hell and you want to get as much mileage out of that steel wool pad as possible. GTFO with saying to use it dry just because it will rust.
It is better to wash and dry the windshield before rubbing with steel wool, as dust particles may consist of silica and alumina - minerals that are hard enough to scratch glass. Washing removes these particles, but rubbing with steel wool just pushes them around, like working with sandpaper.
It is for this reason that I don't use my windshield wipers with washer fluid to get rid of dust in dry weather. I've driven cars whose owners would do that regularly, and the result is microscopic scratches in arcs defined by the wiper blade motion that produce a diffraction effect at night or when driving toward the Sun in the morning or evening, making driving difficult and dangerous.
Milosz Ostrow 👎
There's also a rain-x for inside glass, great for stopping windows fogging up. Great video, who would of thought steel wool and glass.
I tried this on my 2002 truck. It was resl hard and took a lot of rubbing. I used a razor blade scraper first, and it easily removed almost all of a grit that was on it . I then used the steel wool and it turned out really nice. Much easier.
Just a note for the side windows, I recommend the window visors (WeatherTech, Husky, whatever brand)! We had ‘em installed on our F-250 and it’s a surprising difference in how clean they stay!
Plus we can leave the windows cracked in the Texas heat without rain getting in!
I've induced some light scratches on glass using the 0000 steel wool dry. Using a thick lubricant will greatly reduce the risk and give the same results. Oddly enough regular cheap liquid chrome polish is the best we've found overall.. Glass cleaner or detail spray tends to be too thin, but most polish, wax, etc. will do the job fine. Your steel wool MAY rust, but it's cheap and worth the peace of mind. We toss them after finishing a car anyway, you want to minimize the steel "dust" as much as possible. But done safely with the correct grade steel wool and lubricant there is no easier way to remove deep etched water spots on glass. If you're still not willing to chance it, a product called Quick-Glo can get the job done without the steel wool, but it will take more time and labor. Nothing else has come close to working as well on deep etched spots as these two methods, and I've tried dozens of dedicated water spot removers and techniques. The ultimate takeaway here is to always clean them when they're fresh and don't let them etch in if you can at all help it. I'd also recommend using a dedicated glass ceramic coating if you can afford it and feel comfortable applying it, though Rain-X helps and is far better than nothing. A Magic Eraser with distilled water and vinegar is an easy and cheap method to remove what glass cleaner and/or clay won't. Always begin by testing with the least aggressive method and work up. Start with simple glass cleaner, then clay, etc. Windows are just not fun at all no matter how you do it.. 😠😤
Would this method do anything for glass that has a lot of scratches and dings?
@@thomasschwarting5108 Nope. At that point you’re at cerium oxide, or CeriGlass and a felt glass pad on a rotary and lots of patience. But it can be done.
Thank you for the info. I haven’t done the steel wool yet.
This is a very practical and effective informational session. Thank you for the helpful visuals + clear communication lesson. Pro instructor!
I am planning on watching all of your videos from the beginning until i am caught up to the ones i have watched. Nice job.
+dave cordisco Thanks Dave! Popcorn's on us! LOL
I plan to clean my motorhome this weekend. I'll definitely be trying this. You guys are so awesome. Thank you.
Pretty good job man, I'll been doing this like tomorrow.
Im trying this on my side chicks car first before doing it on my gfs car and then ny wife’s.
Yea good idea. Gotta be careful.
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣👌👌👌
LOL that’s fucking funnnny
it's a pretty rigid person not on purpose but I honestly have a really hard time relaxing unless I'm euphoriclly high which is like... very very very few and far between I do not ever laugh audibly nor do I actually feel Joy in my life on a regular basis. bioskop me the fuck off guard. I laughed audibly while drinking a 20 answer in my car parked in the driveway before I go inside to my empty house and no I do not drink and drive I specifically just sit in here and run the heater in my driveway because it's got to be cheaper than running a whole house heater? anyway fuck all of you and your judgment since I'm explaining myself too much... thank you for the laugh my random internet poster
Thanks for the laugh, made my day man!!
Jim Simpson I know. I was juggling the camera, the rag and the hose all at once, but I've since bought a tripod. :)
That's what I do. I first learned about 0000 Steel Wool was when I complain about the grey primer overspray onto my windshield to a Body Shop Manager. He simply came out to my car with a 0000 Steel Wool Pad in his hand, and with it cleaned my windshield like new. A great hack for cleaning road film off your windshield, BUT NEVER use this technique on your vehicle mirrors ... they will get all scratched up.
Well I don't have an RV, but I do have a windshield on my car and this was a very informative video. Well Done!
THERE'S AN ALIEN SITTING IN THE PASSENGER SEAT AT 4:54 WHILE APPLYING THE RAINX!!! RVgeeks is an Alien!!! :-)
+t hammer You've outed us!!! :-P
L
Js
@ t hammer Jesus, the hair on the back of neck stood up! That's creepy as hell.
Good catch!
t hammer yeah I see it lol ..Them eyes 😱
The hard part was convincing my girlfriend to clean my windshield with the steel wool to prove how dumb I am
Very well explained and to the point.
This is exactly how I do it and I can attest to the results.
I actually seldom use my wipers and in fact in heavy rain driving I see better without the wipers going.
It's especially useful when passing big rigs that throw off lots of spray.
I love RainX.
Been using 0000 Steel Wool for years (like since the 70's) in that every car I detailed the chrome and glass were done and also with a paint sealant on everything but the front windshield as it was done alone with the steel wool . . Even the exhaust and tailpipes on cars and trucks look like new and stay new looking and can now just be washed clean with regular soap. . . . Paint Sealants are great as well as Rain X is for glass as I do my personal cars with it. . . . .Been using the invisible Glass window cleaner since 2004 and Stoner makes a great tire dressing which make the tires look natural. . . Great products,
Thanks for the video! I will try this today because I already have the 0000 steel wool, the Rain-X, and the window cleaner you used.
I removed hard water on my windows using #0000 steel wool and car polish. the hard water had been there for years and now its finally gone! It didn't really work at first, but when you add a little polish to the steel wool it comes out with some elbow grease
I've been using steel wool on glass for 20 years. I recommend spraying the windshield with glass cleaner first (any glass cleaner) and scrub it with the steel wool when wet... Then use paper towels to dry... News papers work in a pinch. You have to wipe it dry though. Any residue left will leave streaks. A wet/damp paper towel or paper will leave streaks always.
Could I combine it with pumice hand cleaner?
I am a detailer and use hand wax of any kind on my windows. It basically does the same thing as rain x, only it seemed to last much longer and it's cheaper in the long run.
Why would you ever wax you hands?
I usually do this twice a year while washing my vehicle. Once in spring, and once in fall. I use a spray foam gun to foam the entire vehicle. Then use the foam as a lubricant and apply steel wool in circular motion. But, watching this video, I might try it dry although steel wool isn’t that expensive. I noticed great results every time.
Used steel wool & dry newspapers in detail shop for large car dealership for years . Works very well
Add vinegar to the steel wool to remove stubborn hard water spots.
specopsbrat- Interesting. It actually works?
ADD THE VINEGAR TO THE OLIVE OIL TO MAKE THE DELICIOUS SALAD DRESSING
yes.
Would an s o s pad work on hard water stains??
Glass wax was the best!!!! I used this on golf carts in the early 70s, had a case of it that lasted until the 80s. Wouldnt you know it worked well because it contained lead!!!! So like the shiny lead paint that worked so well..see ya!!! Something about death made them remove from the shelf.
PRIOR to steel wool for heavy bug action cover windshield with a wet beach towel. Reduces the wool labor time. But if I was stuck with the wife in the motor home 365 days per year i may just do the labor.
I can tell by your comment you also like to eat lead paint chips as a child.😂
The steel wool is an interesting idea! Although you mentioned that it’s not necessary to wash the window before applying the steel wool, I would think washing the windshield thoroughly first is a good idea so as to make sure you aren’t grinding whatever tiny particles and grit are on the surface further into the glass.
It’s the same concept as when cleaning glasses, just on a larger scale.
Well made video, thanks!
The windshield must be free of moisture.
@@jerrycallender9927 Ah, in that case, I would wash it and then let it dry! Thanks for the reply!
I use Mr Clean dry erase pads slightly damp,….
@@prvtjy My wife had some leftover fine steel wool which I used on my 2006 vehicle and was very satisfied with the results. I used water while using the steel wool.
this worked perfect for my windows on my 1968 c10. had alot of over spray and came right off, then I did the rain x and the glass cleaner. windows shine now. thanks for the vid.
+bravojuan559 Awesome! 😊
I can tell you that I have been using carnuba wax on my windshield after the cleaning. Works well after all the tricks you showed here before the application of the coating.
One way to speed up this process is to take about a third of the pack of steel wool and make an almost "mitt" out of it. Covers a heck of a lot more area and is still cheap. Beats one piece.
I use it on the inside also. Beats newspaper.
Why am I watching this, I don't even own a car
you could probably use that trick for other stuff than a windshield
yeah or maybe you don't own a car but you own windshields ! I don't own a car but i have 3 windshields laying around in my backyard ! Now they are crystal clear !
Same, I own a truck but I'm way to lazy to do this...
hurry up,save up and buy one so you can join the club of misery and expense
Same mate ahah
Nice video.
Been doing this for years. Instead of RainX, I use regular car wax to finish, I find it beads water great and think it lasts longer than RainX.
Also, hit the wiper blades with a rag with some glass cleaner on them. You don't want dirty wiper blades smearing dirt on your nice clean and slick windshield.
My dad taught me this, he had a 67 fastback & a warehouse full of show trophies till cancer killed him. 0000 is all I use on glass in my cars, trucks, also bathroom mirror, house windows, any glass or mirror this is the only way it should ever be taught nice vid
Love Rainx, been using it for 23 years, Just recently I drove for 7 hours in the pouring rain and only 3 times put the wipers on after following cattle trucks.
Now show us step by step how to clean the inside of the windscreen.
RAZOR BLADES ALSO DO A GREAT JOB AT REALLY CLEANING WINDSHIELDS!!!!!
I woke up the other day and my sister is trying to clean off her windshield... Had tar all over it... She hit the wiper blades too... I Grabbed the spray bottle, some rubbing alcohol, and a pack of razors... Also a cloth to clean the razor blades off... Took about 15 minutes, I broke out the Rain-X wiper blades and replaced them for her... Clean windshields is a lifestyle choice lol... This will probably be better for water spots.. but for tar and Teresa I would say the razor blade method is definitely going to be more effective. Easier to clean off the blade... For anybody reading this just make sure that you buy like a standard razor blade some of these companies have extra hard blades now... Don't want to scratch your window
On another note for the love of God don't use a 3M product on your window... Ie do not use your kitchen sponge...
Just finished trying this on my SUV and it works GREAT!!!! Had a sticky film on the windshield after getting the vehicle out of the body shop since it had been in a minor fender bender. We had tried washing it off and a few other products but nothing we used seemed to work. But thank goodness I remembered seeing your video going around on FB so looked it up again on RUclips n so happy my windshield is SUPER clean!! Thank you!!!
Probably the lazy body shop people did not cover the windshield very well and you were actually spraying off paint overspray. That's what I'm dealing with as well.
A straight edge razor blade works excellent also, keep it at a 45° angle.
Straight edged razor scratched my outdoor deck rail glass.
I did this once with a new dishwashing pad (the green and grey ones where one side is soft and the other is a scrubber) and went all over my windshield with a little soapy water. Absolutely jacked up my glass so I got sunbursts every time a point of light hit it. Driving at night was a dazzling fabulous experience. Good times.
Just use a very small piece of paper towel to apply the rain-x. The thick sock will absorb and waste the rain-x. Rain-X is one of the best inventions ever. I never use my wipers, even in heavy down pours. One time, I had my son drive and it started to rain heavily while driving 70. I told him not to use the wipers. He could see clearly while other drivers were pulling over to wait the storm out.
From the comments above on steel wool and the question of scratching. Utilize 0000 BRONZE wool, instead of steel wool. No matter how fine, steel is harder than the surface of glass, especially tinted glass coatings. If you're cautious and use some soap/water the steel probably won't scratch, but you can be sure bronze will not scratch. It also will not rust so you don't have to discard it as quickly, and I don't think it burns as easily as steel wool. BTW fine steel wool is an excellent campfire starter, equivalent to old school flint & steel and tow-tender
Sorry, but as has been mentioned in these comments repeatedly, 0000 steel wool is non-hardened low carbon steel with a hardness of 4 Mohs. Glass is 6 to 7 Mohs, so steel wool cannot scratch glass.
Good nuff. Knock yourself out. Just trying to help the squeemish w/ a fool proof suggestion. BTW almost all consumer products come from China/Asia today which means all the research on hardness or softness you may be digging up from Western engineering specs/gospel is just a mere suggestion to the modern producers. They don't give a sh-t about the quality or specs-- they produce anything that can slide through and you'll buy at your local China-Made outlet (including auto glass). Vehicle glass is thinner and cheaper today than it was just 10 years back, and relies on external coatings to hold shape and color. These may cause your reader's problems as well as harder than expected s-wool (made from spinning scrap metal) as well as your viewers using Brillo pads not knowing what 0000 even is.
I doubt if I'd be able to research 100s of old comments to find such-- so I didn't see any such comment, just casually replying to a comment concern. Happy glass wiping. Hope you have some nice mountain views this summer. How do you RV guys afford the Gas???? I often wonder when I see those mega-buses pull into a service station. Looks like fun though.
S Tho Fiar enough about the China/Asia factor. Good point. Although we have never had a problem so far.
When the only home you own is an RV, it's still cheaper overall than all the costs associated with a regular house. Even with $4/gallon (at 7mpg) figured in! :)
Yes, I've used 0000 steel wool every now and again on a stubborn glass stain w/ no scratch but I'm not saying it couldn't happen. Things are just getting junkier in production with more plastics and fillers and scrap metal in surprising applications.
My neighbor worked the GM assembly line. He remembers them suddenly using super thin secondary & soft steel (that had been reserved for hidden, non body parts) to make doors during the big US-steel strike. They warped and dented as they went bumped down the conveyor, so they reassigned him to a new nob of spraying the inside of the fresh door w/ tar before putting it on the line, to keep them from denting. When the strike was over, GM continued to use the crumby steel, but now advertised cars as being "soundproofed" in the doors to reduce road noise. Thus your car/truck suffers from door dings easily.
S Tho,
I haven't been able to find any Bronze Wool grade finer than 000. Is there a 0000 Bronze Wool? If so, where did you get it?
love the invisible glass myself I also use a product called glass wizard which is just a microfiber buffing cloth stretched over a wand that has a triangular shaped flexible plastic mounting plate on it - makes cleaning the inside of a windshield super easy and doesn't leave streaks when you use it with the invisible glass cleaner
This is the exact way I cleaned and detail my 73' Charger on my 16th birthday 17 yrs ago.
It works. Being. Doing our trucks at work. Alot of concrete dust. Hard to get off. Does an amazing job.
Good video, steel wool works like a charm. I actually wash the windshield first, so the silicate grit doesn't scratch it. Also, try using good carnauba wax instead of Rain-X, it lasts longer, and you can get it on the paint. Cheers.
Worked in the OEM show car industry for a lot of years - we used the 4x steel wool method for our ride-and-drive cars with great results. We would actually use a rotary polisher for the mid stage and then a cheap cleaner wax to finish.. good vid my friend.
Thanks so much. Good to hear that kind of validation from someone in the business.
This is a very very good DIY tutorial. Thank you very much sir. Heading to Walmart now, I'm going to buy those.
A real good video and some solid advice. I've used RainX on my cars and I also use Invisible Glass. I took us years of buying and trying to get the finest products honed down. You've now saved thousands of viewers time, money and aggravation with your advice.
I grew up inSouth Florida and we would get really big rain storms and bug issues before RainX I always waxed my windshields inmy 2 seater convertible if I maintained a speed of 45MPH or higher even with the top down the rain would blow right off the top of my windshield and clear the driver and passenger heads completely I also drove a Jeep I went offRoading in and often it was inMuddy areas with the wax I could rinse the windshield with just a garden hose on my Sportscar my wipers worked intermittently when they wanted to do so we eventually figured out why and permanently fixed that problem with a new motor
I use steel wool 0000 all the time to clean my
Wrangler windshield. It is also used if there is overspray on glass. I would suggest soap and water , not using it dry. Won’t really scratch the glass but i like to use it somewhat damp
'I drove commercial trucks for 20 years and I did use the steel wool always work plus " RAIN X",, excellent,, 👍👍👍👍👍
Same 0000 brand?
I had a detailer, at a dealership I worked at, show me this years ago. Been doing it ever since 1990.
Could I combine the steel wool with pumice hand cleaner?
@@Phuong_Nguyen_ , I don't think it would really be needed. I/we use a "spray type " foaming window cleaner. The brand I get is called Spray Away. GM dealers sell a similar product.
Spray on, apply just a bit of elbow grease, and your windshield will be clean and smooth as a baby's bottom.
@@tedharvick9010 does this method remove scratches?
@@Phuong_Nguyen_ , not that I've seen unfortunately. Although, I did see our detailer use a buffer and some polish on a windshield once. Never really took note on what he was trying to buff, nor what kind of polish( grit, etc). Best bet might be to find a detail shop and see if it's possible on your particular scratches.
BE CAREFUL TO THROUGHOULY **CLEAN*** your windshield before you do this. I cleaned the windshields of 2 cars based on this video. I used Super Fine Steel Wool Grade #0000 from Homax Products. Both windshields were scratched in the process.. The scratches are clearly visible in direct sunlight. They do not normally bother me, but if you happen to turn your car into an intense beam of sunlight at the right angle, the windshield lights up light a million white LEDS and it is difficult to see out of the windshield. I'm not criticizing anyone. Just FYI. I cleaned my windshields first, but I guess I did not clean them well enough. Apparently there was some dirt still on both windshields.
Note that you can scratch glass with #0000 wool if the quality control in the manufacturing process was not perfect, and a few stray strands of larger wool found their way into your bag.
Hans Zarkov I
I would say your windshield probably had previous damage that the cleaning revealed...cause I know 0000 steel wool doesn't scratch auto glass...used it for over 30 years on windows and chrome in a body shop environment.
@@markanthony3275 it's not even possible to scratch glass with steel at all it's too soft
RV, You forgot to mention to not do this on a hot day, in the sun, but you have to do this on a relatively cool day, so it doesn't dry smeared. I think that RAIN-X says this also when applying their product. I've used rain-x.
For inside glass of windshield, clean with 1:10 ammonia and water and wipe with newspaper. Comes super clean, no streaking, and no lint from paper towels. Wipe dry with dry newspaper.
probably not great for the dash tho. Might be better to spray a micro fiber towel then clean the inside glad with that.
Use newspaper for cleaning windows nothing better
remember to wash off the little bits of steelwool or you'll have little rust spots all over after a few days.
This advice should be pinned to the top.
Since we've been watching your videos I am amazed at the variety of topics you cover. Good stuff as usual.
Charlie and Martha
Thanks so much Charlie & Martha! There seems to be a never-ending supply of things happening on and around an RV, so we're happy to share. Wait til you see the video coming out this Friday about some little invaders on our rig and how we stopped them! ;-)
Nice tip. Steel wool can be used for so many tough jobs.
Very nice videos, well done in all aspects taking it right to the point. Thanks for your time. God bless you.
Beautiful video!! Almost makes me want to go out and buy a car just so I have a windshield to clean!!!
Bahahaha
My experience....many, many years ago I had a fleet of approximately 25 to 30 cars (year dependent) that did a daily interstate drive of 260 miles each day/night. Half the cars had Rain-X, the other half did not. The cars that had the Rain-X needed their windshields replaced every year or so due to micro-chipping. Those cars caused huge amounts of grief with the drivers who were driving west as the sun was going down. The windshields were nothing but millions of rainbow bright spots making it hard to see through due to the millions of micro chips in the glass. The cars without the Rain-X, driven on the same route, by the same drivers did not have this issue. Also, as the drivers returned to base after the trip, they had issues with the Rain-X again at night if it was raining. When going under a street light, the millions of micro-drops on the windshield would turn opaque white, which would make it very hard to see through. Depending on the aerodynamics of your car, the windshield may clear water at 30 mph, or it may clear at 50 mph. So if yours is the latter and you are driving down a residential street, you are getting blinded by the white haze quite often, as your window is not clearing rain by itself due to the reduced speeds. You might say to use your wipers then, but if you've ever used Rain-X, then you know that it causes your wipers to chatter back and forth across your windshield, as it's kind of jumping across the glass instead of sliding smoothly across the glass. If you use your wipers, you can see that the Rain-X wears them out quite quickly as you will find long, vertical, streaks of rubber being left on your windshield in various locations. Maybe they've changed the formula over the years to eliminate the damage it does to the glass, but me personally, I will not use that product, as it makes it dangerous to drive in the rain at slower speeds, under street lighting at night, and damages the glass long term. There are other products out there that do a similar job to what Rain-X advertises, that do not damage the glass, work at slower speeds, don't cause wiper chatter and rubber deposits on the glass, and don't white-out at night in the rain when under street lights. Some last even longer than Rain-X between coats. I'm not a shill for any company, so I will not name a particular product, but look for products that are for sealing or coating car paints, and see if they are recommended for use on glass, particularly windshields. Note, there are coatings out there that are listed as glass-safe, but should definitely not be used on windshields as they leave a long lasting visible distortion to your windshield, and/or an oily looking film...both can be removed by use of a good deal of elbow grease! Look for liquid ceramic, or silicon dioxide coatings. Again, my experience with Rain-X is from a long time ago, and maybe their product formula has changed...but I believe there are better products out there today, and they are not limited solely to use on your auto glass.
what
Thanks for the tip about the steel wool, I'll have to give it a try. I've been using Bon Ami or Barkeepers Friend, essentially fiberglass glass cleaners that don't scratch the glass either, it can be applied dry, but you need a damp cloth to use it to clean the surface.
Ok interesting and thanks. I use wet-dry sandpaper, 1200 is usually enough and you can go 1500 and up to 2000 grit if you want, keeping it wet the whole time. But first, I clean by sprinkling baking soda all over and then spraying white vinegar into that. The bubbling and fizzing removes water stains and everything. When it stops fizzing, spray with vinegar again. Wash all that off, being mindful to not let the mixture dry on the paintwork and then start sanding. You quit when it feels like a babys bottom and you will see that water sheets right off. If you have light scratches to get rid of that were already there, try 800 grit to remove those. Ive done this method on the advice of a glass MFR for at least 30 years and never saw any scratch or damage. Its WIPERS that do damage. Glassmakers always sand to smooth glass and remove imperfections. But never sand dirty glass, it will create scratches that will make more sanding necessary.
I've been doing this since the early 80's in my Auto Body shop.
you've made this very clear. thank you. (see what I did there?) ;)
+wiseguyproductions Aye aye. Eye si. ;-)
Completely SAFE! I've been using 0000 steel wool for 20+ years, on Toyota's to Porsche 911's, which is a tried and true detail trick. Your RAIN-X will not only work BETTER but will last LONGER! I would, however, highly recommend MICROFIBER CLOTHS ONLY for this kind of job. Many times more effective.
Not only that but CHECK THE LABEL on the microfiber towel itself. It MUST contain some measure of polyamide (typically 10-20%) and then you have a good one. 100% POLYESTER IS NO GOOD...TERRIBLE, in fact. If it is 100% polyester (like the ones from Harbor Freight) it will do nothing more than smear it around.
TechEdSkills Dangit!!! I just bought two packs from Harbor Freight!
Yep it works, and will help with very light Scratches. To
I haven't used Rain-X for a good 25-30 years because all my prior efforts left my windshield badly streaked. After watching your video I decided to try it again only this time I first cleaned my windshield with a brillo pad (steel wool with soap). My windshield was thoroughly wet as was my brillo pad as I lightly went over the surface to remove anything, bug guts, oil, everything. I thoroughly rinsed the windshield with water to remove the soap & then dried it using micro fiber rags.
I then applied the Rain-X & let the haze form.
Like you, I then went over the windshield with a clean, dripping wet micro fibre rag.
I then took clean micro fibre rags to dry the windshield using horizontal strokes figuring if there were any streaks they would be running from side to side, telling me the streaks were on the outside surface of the windshield.
After using clean, brand new micro fiber rags, I carefully inspected the windshield. MUCH TO MY SURPRISE, THERE WERE NO STREAKS, just a nice clean, clear windshield. I took your suggestion & also applied some Rain-X to the wiper blades.
In retrospect, I think my prior streaky problem was because I didn't thoroughly clean the windshield before applying Rain-X + I used a dry cloth to remove the haze.
The added step of using thoroughly dripping wet micro fiber rags instead of a DRY cloth was another big change in my procedure.
I believe using micro fibre rags was a huge factor in eliminating streaks to DRY the windshield, something I didn't have 25-30 years ago.
I'm so pleased, I'm going to be re applying Rain-X to my windshield from now on as part of my routine.
+Bill Cole Absolutely correct. The glass has to be extremely clean before applying Rain-X or else you will get haze mixed with dirt and streaks and so on. The video is how I've been doing my cars for over a decade and it works like a charm every time. The product is amazing IF applied right. Safe driving!
+Bill Cole, your experience (and time period) is like mine. I gave up on Rain-X after trying to do the right thing with it and starting with a spotless windshield (I thought). Buffed it after it hazed till clear. But what I got was a problem when I did actually need the wipers and the arcs were smears that made night driving in the rain disastrous.
Yes (AZ) I hope you did by now give Rain-X another chance!!
I've been a Rain-X'er since 1979. So firstly,I've tried all the other brands of similar that I could find over the years, and found that only the Rain-X could achieve a non-streaked finish.
What people might think as 'streak', is more likely a 'haze'.
I have found Rain-X can cause a haze, if I try applying when the glass is already damp.
I now clean the windscreen, by applying the Rain-X, letting it do all the work to clean even the worst case of dirty windscreen ( i.e. I don't ever wash the windscreen clean prior to applying Rain-X )
I apply Rain-X:
with a Kleenex face tissue, folded again & again, down to a 2 inch square pad.
Never again use a sock etc, as the acetic acid will destroy the sock's material.
Also, because once I have used a sock (or any cloth material) with Rain-X, I don't re-use, as it will only re-introduce old soil back onto the window from your previous wiping...
Apply Rain-X with circular motions, always overlapping the circles.
Never do it with straight wiping motion.
Once the entire window has been treated,
leave it to dry for about 15 mins.
Once dry, do not wipe with another 'damp' cloth to attempt the removal of the haze.
Instead, get your hose ready, with a 'mist' head setting.
Standing at the centre front of the car, direct the mist ( at fairly high pressure) towards the centre of the glass at first, and start fanning the mist towards all parts of the glass.
What this is doing is to assist creating a grain of flow over the window, replicating the approx airflow path of how subsequent rain hits the window whilst driving
So the main thin trying to say is that the only time the glass is actually wiped, is the initial application wiping of the Rain-X itself.
Streaking is a result of the latter wiping with the 'dampened'cloth, that is mentioned in the Instructions on the bottle.
The Rain-X Instructions themselves need to be re-written.
When (late 70's) Unelko (trademark) first revealed this product to the aerospace marketplace, the Instructions were much more comprehensive, than what they are now...
Oh yeah! never apply Rain-x directly to a wiper blade rubber, as, again, the acetic acid will cause premature deterioration.
On the same note, after you have applied Rain-x, do not lower the blads to the glass until the final spray 'misting' of the glass with the water hose.
That brillo pad works wonders for removing bug guys from the hood too. You should do that next.
AZ Claimjumper . I have used Rain-x from the beginning (and sold a lot of people on it). The alcohol it is dispersed in does a good job of deep cleaning. Getting that stubborn haze off is the biggest problem though - sometimes I use dry, sometimes a damp cloth. Perhaps a damp micro-fabric is best. The coating does not last a long time and nothing is said about why it disappears - wind friction? UV light? Wipers? Ammonia-based window cleaners? Heat?
I use cerium oxide. It can actually clean and polish glass. Removes anything on the glass and with a power tool can even remove scratches.
Hey wanted to give you an update, lve been using your method of cleaning windshields, I especially love the ( Invisible Glass ) works great, thanks for the education
Great to hear, Gregory! Glad we could help!
If you have ever worked in a auto body shop, that's how we got spray dust of the glass after painting. It won't scratch the glass because the steel wool is way softer than the glass.
Don't ever use steel wool on your windshield! Use bronze wool. If there is any bright work or molding around the windshield or rear window of a vehicle like most older cars and trucks and newer luxury cars and SUVs oh, this is a very bad idea. What happens is, as your cleaning the glass tiny fragments of the steel wool wear off or break off and migrate down in behind the bright work where it rusts. It also migrates down into areas of the firewall and lower areas of the front quarter panels . I hope you remember This is also true if you have any sort of intake in front of the windshield. Many cars, trucks, SUVs have fresh air intakes for the heater and air conditioning unit.
Bronze wool doesn't oxidize or rust. This is why it's used in the marine environment. It's nice and gentle on the glass as it's softer than steel wool. Do not use stainless steel thinking that that will settle your rust problem.. Stainless steel, even if very fine, will still scratch glass if not used with the absolute upmost in care. Also, it may still rust depending on what type the stainless steel is. It would require , at minimum, type 304 or 316. Just some friendly advice from an old fart with decades in the metal industry, manufacturing and restoration.
I use sheep wool. Works great. Make shure it is off an organic sheep.
I use a razor blade in lieu of 0000 steel wool and it works.
Now if there was only an easy way to clean the INSIDE of the windshield...
I no longer use cleaning products of any kind on the inside of the windshield. I use a microfiber cloth that I keep clean. I just dry wipe the inside to remove the offgassing film. You first time will take some work because the film will tend to streak. So get another clean cloth for a second wipe if you get a lot of smearing.
When I take my car to the car wash, I ask them to NOT clean the inside front windshield, because adding product just makes it film up faster. If they don't listen to me, I just clean it off with my dry microfiber. Just an annoyance I like to avoid. I've tried for many years myself to get it perfect, but you can't. Dry cloths are your answer.
Hope this helps!
Bryan Smith that makes perfect sense!
Bryan Smith thanks it works 👌
Hot windshield and wet news paper works great in my experience, then dry news paper.
I used a dry microfiber cloth and it leaves streaks.
Seems good, but here's how to save yourself 10 minutes : Read this; Clean your dry windshield, with dry steel wool, then use Rain- X.
it is nice seeing someone else do the work. besides i needed a break from watching flat earth videos all day long.
Rain x in uk used to say sprinkle water on after applying to buff,but every time you use yr wipers yr supposed to use yr screen wash which in turn takes the rain x off..its a bit like the pks of sausages and buns thing..one works against the other and you never have enough
As a retired body man I can vouch for 0000 steel wool. I would add another secret, use windex with the steel wool and it won't rust the steel wool. You can also use this method on a glass cooktop stove also...works great. On a car I would be careful to clean off the small pieces of wool crumbs that break off during cleaning...if you leave them on they will rust and leave rust spots when water hits them.
Unfortunately with my asthmatic / allergic coughs & sneezes, the inside of my windshield has more splatter than the outside.
😷😷
Yuck
I viewed this with great interest.
I use Scotch-Brite on Pyrex glassware all the time, so had no difficulty believing I could use it on my windshield to remove some sticky residue. Boy, was I wrong.
Having scratched a patch of the inside of my windshield, I am curious as to whether your 0000 steel wool technique might work to remove or at least reduce visibility of the scratches (typically worst when driving towards the sun). Stopping at the hardware store today.
did it work?
Love these hacks that id never try thinking it would scratch .imagine steel wool on glass . i have a backhoe the cab always steamy windows in the morning during the winter months .i watched a You Tube video and wiped shaving cream on my windows ,guess what no frost or steam in the mornings . Thanks good video .didnt have to learn your dogs name and watch your kids play the clarinet either before you started . lolo 😂
I had tried everything including Barbers Friend liquid cleaner but the best thing was the 4 0000 steel wool on a dry windshield which got all the calcium deposits and water spots ~!
Don't have an RV yet, but besides using the steelwool you recommend, which I'll probably try on a small spot first, Instead of Rain-x, I simply use my car polish on my windshield, then buff to a clear, and the windshield becomes as water-resistant as Rain-X does & (IMO) last much longer; just as the wax on the car does.
Less products, less cost... give it a try.
clean your windshield or any windows in the shade. never clean windows or car for that any case in direct sunlight
Good job! Clear and concise instructions and with no extra BS added. You should do this for a living ya know! I would not spray the inside of the window like you did though. Safer and less messier to just spray the rag instead.
I worked a a new car dealership for 30 years and we had to replace new car windshields that were cleaned with steel wool if you drive into the sun it will look like you have spider webs on glass I made them use brass wool not steel not only that but it will leave spots with waste of steel specks on white paint like rail dust use only brass wool
+Robert Ash Funny... we've been steel-wooling our windshield one or twice a year for nearly 15 years, and no spider webs. Guess we're not driving on sunny enough days.
ROBERT ASH
Nonsense. If 0000 steel wool is used on a properly pre-cleaned glass surface it will NOT scratch it unless there is debris in the steel wool or on the glass surface that could cause scratching.
Rain X works no doubt, but I have found that using a Carnuba car wax on the glass works better and lasts longer. Just don't wax the wipers. For that I use isopropyl alcohol for deep cleaning the wipers. I will give the 0000 wool a go to see how it helps. I'm sure it does.
Most side view mirrors are made out of a special type of material that is not as hard as windshield glass. the 0000 steel wool WILL scratch your sideview mirror glass, as it is softer than the steel in steel wool! Just use glass cleaner on sideview mirrors. I learned the hard way! And also remember to keep steel wool away from car paint! Bad things happen to car paint that hugs a pad of steel wool!!
I would recommend using brass wool rather than steel wool as the small strands coming off of the steel wool will lay in crevices and rust. I have used the brass version for years. Brass wool costs more but well worth it.
What's the difference between brass wool and bronze wool? I see both being suggested. I'm getting they will be a little less thorough than steel given they are less abrasive.
This is almost exactly the method I've used on my cars for over a decade. Rain-X is amazing stuff IF the glass is clean and it's applied just as you showed: some on a rag first and then splash it on and rub it in good. THAT step has made a huge difference. And total agreement on Invisible Glass. It's that product or nothing. Great video!!!
+LS Invisible Glass ROCKS! :)
Thank you for the tip and it worked my glass looks great.. thanks again.
I picked up double aught (00) by accident one day and scratched the piss out of my windshield. Have used this trick forever. Make sure you use (0000) or you will regret it!!