OB-4-I just got one! I stuck a stereo mic up to it last night and recorded the previous night’s solo jam, which was recorded to the OB-4 memory because I used it as an amp or monitor speakers (I just had to rewind it for awhile, before recording). 😊 I love the looping and tape “scratching”, remix-in-a-boombox features, and also the Ambient reverbs!!
@@ian84 Good question. I’ve not experienced latency with line-in real-time input on OB-4, to my knowledge (having not scientifically tested for this); I had experienced such latency with line-in on a UE Boom speaker years ago, which led me to acquire an iLoud and more recently an OB-4. Granted, there are several features on OB-4 that can introduce latency-other than Bluetooth, which obviously does so-including if either playback speed is .9x or lower, or if the tape dial is used to rewind the live audio-either of these will switch to playing from the memory (potentially even
Hej Man! Thanks a lot for your video. Have you been, by any chance, able to link your OP-1 to the OXI? I still cannot find a way to make it work. Again, thank you for your concern and channel!
3:00 Any psychologist will tell you that you do have obligations. There is no other way if you want to maintain a good relationship with the brand and continue to receive goods from them for review. It's just another form of advertising that has gained popularity among reviewers, that's all.
Every RUclips under the sun says same thing now, I got it for free but don't worry, I'm not influenced by them at all. Use your own money and I'll believe it.
@@AlexanderShelestov why you even lose time watching my stuff then? You are telling me Im saying bullshit, I am just doing my job and doing it with passion and love.I am not telling you to buy anything, I am not pointing at you any gun. I just do videos, and I feel there is lot worse in the world than my "bullshit".
Got the perfourmer, finally. Sequencing it either via Octatrack or Polyend Play. Love your new setup, fits well with what you do. For a while i haven't seen your video in my reccomended feed, I thought you put me on some "crap list" after my comments about TE :))))))) I had a lots of negative to say about T6, but I am interested to see it in action and see its' practical application.
@@OoraMusic I know mate just kidding. I dont even think there is such a thing as a craplist lol. Plus, I know your music and your space is free zone for all music lovers :)
Do you using Zuma As power supply of pedals only not instruments? I plan using Zuma for low voltage devices(9V-12V devices such as tt303), but I have not made reverse polarity power cable for zumainstrumets yet. Is there no problem when it works as I expected?
Asking since not many folks have the TX-6. Have you had any luck finding a usb drive that works with the TX-6? Ive tried about 5 already, an SSD and a USB-C Samsung drive, no luck yet. Reached out to support to figure this out. Thought I'd ask around. Thanks for any help.
@@OoraMusic No worries, it works now. Not sure how I managed to fix it but it works. If you run into any errors, just try unplugging and reinserting while the TX-6 is on.
Hi ! What did you think of the TX-6 synth engine ? I don’t know I TE takes your suggestions, but I would love if we could use synth and mixer both at the same time (as a shift mode) and get thoses on separate channels on audiointerface. Also, I’ve saw you back with Model 1 on Patreon. Performing with TX-6 is not the best, but did you see the new midi implentation (it was what make me get one !) Now I use faderfox to midi CC it in live setup 👌 so frustrating that midi implentation cover synth too but you can’t get separate channel for it ^^
let’s make it battery only with an IPAD on AUM out and in via usbC though the TX …. missing then a good replacement of the vermona… excellent machine but not too much field size ;)
All depends on budget.If you have it the new one is the one to get. Otherwise the old one is perfectly capable to cover ( my ) needs and still a great tool, plus now is cheaper on the used market.
Hi Oora, Thank you for posting this interesting video! I learnt some new things from watching it. I especially appreciate the visual order you have, which makes your setup so beautiful. May I ask, the mixer TX-6 seems incredible, but realistically, I suppose it will be tricky to use reliably in a live situation with menu-diving and quite small controls? Thank you, Hugo
If you need to tweak a lot yes, too small. But now it has midi cc for any control, so you can use an external controller. Basically you have a mixer, sound card, recorder in a pocket, and you can hook up a controller if you need a better hands on situation.
Would love to know what cables you're using for the TX-6. I just got the email that TE is back in stock but id like to find some alternatives before I purchase from them. Thanks. The update is also great, just wished my op-1 field's endless sequencer would control the synth. As of now, you have to use the COM-> CTRL to send midi notes to the TX-6 correctly. The OP-1 works with everything else fine without having to be in MIDI CTRL MOde. Anyways, the TX-6 is great, I love touching it:)
@@OoraMusic I can see you really enjoying that part of it (it’s a big part of its feature set). As it’s midi clocked, I imagine you might use it like you use your octatracks live sample features…(to sample a phase, manipulate it, and be able to swap back between that recorded part and what’s playing live on your synth via your mixer). Also - You can not only place its internal effects pre looper, but you can route them post looper so your loop (with the recorded effects ‘baked in’) then gets further effected again on top)… you can also then further time stretch the loop (to slow or speed up the entire thing). I’d love to see you incorporate it into a video :)
agreed, so far I have been asked to do a good review for free product only once and refused, most of the company are really nice and figure that no matter what sending out products is their best way to spread interest
Weird polemics? Not really. Common sense. It’s all advertising. I’d much prefer to hear and see something that had not been ‘sponsored’ by an expensive manufacturer. ( it is in effect sponsored, as it was supplied free and you’re unwittingly doing their bidding).
This is such a clown statement. If he didn't like the device do you really think he would incorporate it into his creative setup? Get a job @cantrip1957 so you can afford more than a rack of behringers
@@OoraMusic hi, i believe you. But, all these kind of channels, all growing and exploring synth journeys, many if mot most echoong the same gear, and when received gratis adds up to a tremendous push for the manufacturer; it is great for them, great advertising. I don’t doubt your sincerity. But for many who don’t have the means to buy into this lifestyle it can be poisonous or stagnating. To be creative does not mean one needs high end boutique equipment. I think that the opposite is often the case. Ok! My opinion. In no sense is my comment meant as personal towards you or your fans. Just an opinion! Have a great day.
@@Cantrip1957 I understand your point. Obviously this it my job so I have way more things than I actually need. I have to produce a video a week and I try to push only things I like. Then, im no Jesus, so take all my words as something coming from a very passionate gear enthusiast. I will never tell you to buy things.
![With a Touch of a Button, Everything will Change [Oxi One is Amazing]](http://i.ytimg.com/vi/gXryGHYXNv8/mqdefault.jpg)
Love your workflow videos, seems like a really nice human-machine conversation!
thanks!!
OB-4-I just got one! I stuck a stereo mic up to it last night and recorded the previous night’s solo jam, which was recorded to the OB-4 memory because I used it as an amp or monitor speakers (I just had to rewind it for awhile, before recording). 😊 I love the looping and tape “scratching”, remix-in-a-boombox features, and also the Ambient reverbs!!
It really surprised me with the sound and fun way to use it!
With the OB-4 line in, is there any latency/lag between what you do and what plays? I saw another channel claim there was.
@@ian84 Good question.
I’ve not experienced latency with line-in real-time input on OB-4, to my knowledge (having not scientifically tested for this); I had experienced such latency with line-in on a UE Boom speaker years ago, which led me to acquire an iLoud and more recently an OB-4.
Granted, there are several features on OB-4 that can introduce latency-other than Bluetooth, which obviously does so-including if either playback speed is .9x or lower, or if the tape dial is used to rewind the live audio-either of these will switch to playing from the memory (potentially even
@@chiefbucknell many thanks for the in-depth reply :)
Hej Man! Thanks a lot for your video. Have you been, by any chance, able to link your OP-1 to the OXI? I still cannot find a way to make it work.
Again, thank you for your concern and channel!
never tried yet, will try sooner or later! check the forum, lot of info there
Perfourmer from vermona is wonderful!!!!
my favorite synth
3:00 Any psychologist will tell you that you do have obligations. There is no other way if you want to maintain a good relationship with the brand and continue to receive goods from them for review.
It's just another form of advertising that has gained popularity among reviewers, that's all.
Everything has become a sales pitch in the RUclips world. Thanks late stage capitalism!
Every RUclips under the sun says same thing now, I got it for free but don't worry, I'm not influenced by them at all. Use your own money and I'll believe it.
We all miss Marx, I guess.
@@OoraMusic I'm ok with capitalism. I would say that we are all tired of the bullshit :)
@@AlexanderShelestov why you even lose time watching my stuff then? You are telling me Im saying bullshit, I am just doing my job and doing it with passion and love.I am not telling you to buy anything, I am not pointing at you any gun. I just do videos, and I feel there is lot worse in the world than my "bullshit".
Got the perfourmer, finally. Sequencing it either via Octatrack or Polyend Play. Love your new setup, fits well with what you do. For a while i haven't seen your video in my reccomended feed, I thought you put me on some "crap list" after my comments about TE :))))))) I had a lots of negative to say about T6, but I am interested to see it in action and see its' practical application.
I would never do that man, I love the fact that you share your opinion and you will always be welcome here!
@@OoraMusic I know mate just kidding. I dont even think there is such a thing as a craplist lol. Plus, I know your music and your space is free zone for all music lovers :)
OXI seems to be the one!
thanks for sharing and congrats for the video and music!
Thank you !
Nice melodies - now you got me interested in the OXI..! And: No kick at all - because we want to suffer more, right..?! :D
Is it possible to sync op1 field and oxi one?
So you can use both the Cue and Aux outputs from tx6 for external send effects? That's cool
yes!
If you could only buy one sequencer, would you go with the OXI One or the Torso T-1?
Oxi one. T1 is great as a second one.
Did i see it right? Is there a random function on the OXI, like press a button and it comes up with a random sequence in a certain scale?
yep. its brilliant
@@OoraMusic yeah thats cool. I have the Vermona Melodicer it does the same but its eurorack and only one channel. Nice to know this Oxi is on the lisy
Do you using Zuma As power supply of pedals only not instruments?
I plan using Zuma for low voltage devices(9V-12V devices such as tt303), but I have not made reverse polarity power cable for zumainstrumets yet.
Is there no problem when it works as I expected?
I use it for instruments too sometimes. I was powering the peak with the inversion polarity cable!
@@OoraMusic thank you for answer! :)
Wait...let me hit pause for a sec and grab a coffee...hang on...ok, less go☕😁
:)
Asking since not many folks have the TX-6. Have you had any luck finding a usb drive that works with the TX-6? Ive tried about 5 already, an SSD and a USB-C Samsung drive, no luck yet. Reached out to support to figure this out. Thought I'd ask around. Thanks for any help.
I am receiving a drive today , will let you know!
@@OoraMusic No worries, it works now. Not sure how I managed to fix it but it works. If you run into any errors, just try unplugging and reinserting while the TX-6 is on.
Hi ! What did you think of the TX-6 synth engine ?
I don’t know I TE takes your suggestions, but I would love if we could use synth and mixer both at the same time (as a shift mode) and get thoses on separate channels on audiointerface.
Also, I’ve saw you back with Model 1 on Patreon. Performing with TX-6 is not the best, but did you see the new midi implentation (it was what make me get one !) Now I use faderfox to midi CC it in live setup 👌 so frustrating that midi implentation cover synth too but you can’t get separate channel for it ^^
I am using the tx for a new things im rehearsing, more info soon. Will try de midi implementation for sure! Never tried the synth engine..
Super cool!
thanks!
let’s make it battery only with an IPAD on AUM out and in via usbC though the TX …. missing then a good replacement of the vermona… excellent machine but not too much field size ;)
Definitely not a small one :)
what would you recommend.. the op1 field or the older version?
All depends on budget.If you have it the new one is the one to get. Otherwise the old one is perfectly capable to cover ( my ) needs and still a great tool, plus now is cheaper on the used market.
Hi Oora,
Thank you for posting this interesting video! I learnt some new things from watching it. I especially appreciate the visual order you have, which makes your setup so beautiful.
May I ask, the mixer TX-6 seems incredible, but realistically, I suppose it will be tricky to use reliably in a live situation with menu-diving and quite small controls?
Thank you,
Hugo
If you need to tweak a lot yes, too small. But now it has midi cc for any control, so you can use an external controller. Basically you have a mixer, sound card, recorder in a pocket, and you can hook up a controller if you need a better hands on situation.
Hi Oora,
Is there any compression added to the final youtube audio or any compression at all?
Grazie e complimenti.
Yes, there is a little compression happening on the TX6
Would love to know what cables you're using for the TX-6. I just got the email that TE is back in stock but id like to find some alternatives before I purchase from them. Thanks. The update is also great, just wished my op-1 field's endless sequencer would control the synth. As of now, you have to use the COM-> CTRL to send midi notes to the TX-6 correctly. The OP-1 works with everything else fine without having to be in MIDI CTRL MOde. Anyways, the TX-6 is great, I love touching it:)
the cables are from amazon basics, cheap and do the work. Wanted the TE ones but were sold out!
@@OoraMusic Thank you. I think I may have already bought those, different color though. Arrive today so ill find out.
jolie session _ bravo
thanks!!
Do you ever incorporate the microcosms looper functions into this setup?
Never learned that part of it, should I?
@@OoraMusic I can see you really enjoying that part of it (it’s a big part of its feature set). As it’s midi clocked, I imagine you might use it like you use your octatracks live sample features…(to sample a phase, manipulate it, and be able to swap back between that recorded part and what’s playing live on your synth via your mixer). Also - You can not only place its internal effects pre looper, but you can route them post looper so your loop (with the recorded effects ‘baked in’) then gets further effected again on top)… you can also then further time stretch the loop (to slow or speed up the entire thing). I’d love to see you incorporate it into a video :)
So you are back in New York?
nope, that probably is the geotagging, that is set wrong :O
Not enough elektron in this video, but except in the background 😋
ahah elektron is always around :)
This setup brought to you by: Edison bulbs.
ahah explain me why :)
Geez i wish the Deluge had the same instant sequence option.. did you get rid of yours?
I lend it to a friend!
When a company sends their product for free and not asking anything in return as a condition they usually believe in their own product.
agreed, so far I have been asked to do a good review for free product only once and refused, most of the company are really nice and figure that no matter what sending out products is their best way to spread interest
I prefer Frekvers over OB-4 😎
I don't know that , will check!
@@OoraMusic it looks identical to the on-4 with reversed orientation speakers. But it’s just a speaker. Really inexpensive speaker 😎🖤
I have a feeling this guy likes gear and gadgets, and music second.
I do like gear and gadgets. Music paid for all the gadget you see. So far I'm having a blast!
Weird polemics? Not really. Common sense. It’s all advertising. I’d much prefer to hear and see something that had not been ‘sponsored’ by an expensive manufacturer. ( it is in effect sponsored, as it was supplied free and you’re unwittingly doing their bidding).
As mentioned, believe it whatever make you feel happy. Ciao!
This is such a clown statement. If he didn't like the device do you really think he would incorporate it into his creative setup? Get a job @cantrip1957 so you can afford more than a rack of behringers
@@djnickmontei hope you are hurrying to buy whatever the latest gizmo that you think will make you creative is.
@@OoraMusic hi, i believe you. But, all these kind of channels, all growing and exploring synth journeys, many if mot most echoong the same gear, and when received gratis adds up to a tremendous push for the manufacturer; it is great for them, great advertising. I don’t doubt your sincerity. But for many who don’t have the means to buy into this lifestyle it can be poisonous or stagnating. To be creative does not mean one needs high end boutique equipment. I think that the opposite is often the case. Ok! My opinion. In no sense is my comment meant as personal towards you or your fans. Just an opinion! Have a great day.
@@Cantrip1957 I understand your point. Obviously this it my job so I have way more things than I actually need. I have to produce a video a week and I try to push only things I like. Then, im no Jesus, so take all my words as something coming from a very passionate gear enthusiast. I will never tell you to buy things.