This was super helpful! Just swapped out my Corsair LL120 fans for Uni SL120 Infinity fans yesterday. Night & day difference in quality! And the amount of wiring is about a fourth of what it was. Very happy about that! But this video gave me some tips that I didn't think about or was unsure about, so thank you!
Hi TravD23, welcome to my channel and am glad you like the content of this video. I have a series of these Lian Li argb stuff which might interest you ruclips.net/p/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm once again thank you for the visit and all the best with your PC build 👍
@@NoOne-qc5fn Definitely worth it for me. As stated above, it cut my wiring down to only a handful of cables. They also perform well (temps have been solid) and look amazing. So for me, it is absolutely worth the change.
@NoOne-qc5fn not as easy at it seems. It's a pain the ass and wish I didn't undo all my good cable managing I had with my QLs I plugged everything up and the l connect 3 doesn't even detect my fans
Hi forcedcobra, welcome to my channel. I would say yes it's a big headache but I believe Lian Li is going to come out with a controller that will enable you to plug all the different type of uni fans to a controller. Will have to wait for them to implement it.
Another excellent video, I do have an issue with L-connect 3. I've tried different methods but failed. Your tip on even power distribution have solved the problem. Thank you Kleo, you are awesome as usual.
Hi Crypto Johnny, welcome to my channel. Yes it will be perfect if you only use Lian Li's argb ego system. If you add on other argb devices, thats where things starts to get complicated.
Power supply is probably only relevant to those people using lots of controllers and fans. BUT the suggestions regarding the USB hub is genius. Most of us have far too many USB devices, connected externally, but we don't know which internal USB line they are running from, and if it has enough power.
Hi Julie Fisher, welcome back. Yup, I have tried using usb splitters which does not have sufficient power and due to the fact that most PC users uses too many usb devices. This will cause intermittence or even unable to recognise the device. That’s why I choose to use an internal usb hub which is powered by the psu sata directly. Btw am using the NXZT internal hub.
Very informative instructional video Kleo. I own 6 Lian Li UNI Fan AL120 , 3 Lian Li UNI Fan SL-INF 120 RGB Infinity Mirror Fans , 2 LIAN LI Strimer Plus V2 ,and the Lian Li Galahad AIO 360 RGB UNI Fan SL120 with 3 Lian-Li controllers in my ROG MAXIMUS Z690 HERO and now I understand how to connect every component together with the NZXT Internal USB Hub 3. The only problem is I own Corsair Dominator platinum RGB ddr5 ram that doesn't sync with the L-connect 3 software so I use the Asus motheroard plug to bypass L-connect 3 and every component syns with Asus Amory Crate. Thanks for a great channel !!!
Hi Jim Hamilton, welcome back, yup there are still other argb stuff which I am not able to resolve as I have tried writing in to Corsair and NZXT for sponsorship. But none replied, that’s why this vid title is meant for all pc builders using lian li products. Nevertheless thank you for your support👍
I've just installed 9 Infinity fans to a new build. On boot 3 connected fans are running full blast which i cant slow down. I have tried everything i can think of, from software to physical connections, but cant slow these 3 fans down. If anyone has any ideas then id be very grateful. This video is so informative for someone inexperienced like me. It feels good to watch a video and learn something for a change. Well done sir.
Hi weaselinjeans, welcome to my channel. If you just plug everything in and can't get it to work. try the steps I have shown you in this video. do one thing at a time. first thing is to get your L-Connect 3 to be able to response with the CPU and GPU temperature. run the benchmark. you see, if you do it step by step, this ensure on the connection and the communication between your motherboard to the controller. Alot which I have aidded, all told me did my steps but when I find out.. it's not exactly the steps they follow. Ended up I have resolve their issues via conference call. telling them exactly what to do. my method as in step by step is to first, ensure the controller is communicating with your motherboard first. then next will be the update firmare. Anyway I hope you will resolve your issue soon. thank you for the visit and to have leave your valuable comments.
@@KleoYan thank you very much once again. When I get home this evening I will work through your tutorial, step by step, and let you know how I get on. Thanks again for the rapid response to my question. Keep up the great work 😊
That video helped a lot or brought me to the solution based on issues i had with L-Connect 3.... So, i'm running an Asus Dark Hero VIII (X570), 5900x in an O11 XL Case. When i built the pc, i was running Lian-LI SL Unifans (infinity were not released back then). Controlling the Fans through L-Connect worked fine for L-Connect 1/2... However, even after upgrading the FW of the Controller, L-Connect 3 was never working... while L-Connect 1/2 didn't cause issues. I upgraded some parts 2 days ago, replaced the Galahad with a Kraken z73 and the SL Unifans with the newer Infinity ones (which also come with a newer controller). However, L-Connect 3 still didn't seem to work - but to controll all the lightning options of the infinity fans you need L-Connect 3. Was driving me mad after x amount of reboots, bios update to the newest versions, disconnecting the pwm and only running per USB etc. My Windows Installation has some legacy, so i reset/fresh installed win11 to be sure no ghost driver stuff or whatever causes issues, nothing really worked though... In the End it was all about USB Power... I have a 4k Aorus Monitor which has a built in KVM connected via USB.... Seems this have drawn a loooot of power from the mainboard and was causing the un-resposivness of L-Connect 3... As soon as i disconnected USB devices 1 by 1 and all of a sudden l-connect 3 started to work, I found out what devices have been causing the issue... So again, thanks a lot for the hint in terms of usb power distribution and to look into that, which lead me to the solution :-) I still find it funny, that i never had issues with l-connect 1/2 though compared to l-connect 3.... That's kinda strange that the issues were not present on prior versions... I can only imagine, that l-connect 3 draws a lot more power from the controller due to all the built in monitoring measurements l-connect 3 is doing from the controller which draws more power? At least this seems the case...
Hello Tino Burkhalter, welcome to my channel. yes one of the issue is with KVM switch or the build in KVM on a monitor.. I had your issues back then and did talk about it. However there are still issues for some peeps as they did not do the primary test or check. I know L-Connect 3 is fussy but once you narrow down the issue. it will work swiftly.I am gald you have solve your issue. once again thank you for your visit and your valuable feedback. 😉
So dumb to need so many controllers to do some led lighting. It's like mixing 20th and 21st century tech. Should be 1 controller, and 1 software to control everything. Esp for the price.
@@micspamgod2324 welcome to my channel. Thank you for your feedback, I have sent this feedback to Lian Li and it will be great if you can highlight this at Lian Li's Reddit forum. www.reddit.com/r/lianli/
I am really irritated that I have spent soo much money and it took us hours searching on web how to connect, AIO and fans. And then you find out you need hub. Which is not shown on any manual.
Your videos have been very helpful and greatly appreciated! I have just built a system using several Lian Li products, and initially I couldn't get the SL V2 controller to show up in my device manager, and following your instructions I was able to get it to work perfectly. I also have a Strimer V2 cable, and that has worked great from the start with L-Connect 3. My last issue, is that I have purchased the Lian Li Lancool 216 RGB version case. I have 6 SL V2 Uni fans - 3 of which are on a Lian Li Galahad 360 AIO. I hooked up the PWM header from the SL UNI fan controller to my CPU_FAN header. I'm not sure if this is optimal, but everything seems to be working fine, and I can control all 6 of the UNI fans with L-Connect 3 (both PWM and RGB). The issue I have now remaining, is the two 160 mm RGB case fans that came with the 216 case. I opted for the AGRB controller accessory, which is just another USB 3.0 port hub, and has some mode and color buttons to control the RGB on these fans. I thought this would be fine, but I've found every time i power off and on the PC, these fans revert back to rainbow RGB - which is really annoying. The case came with a fan controller for the case fans, but to my surprise (and dismay) Lian Li didn't integrate this hub for use with L-Connect 3. What is up with that?? My goal would be to have all the fans and RGB controlled by the L-Connect software. The PWM control of the case fans is working fine using the ASUS armoury crate fan xpert software, so I'm fine with that. But is there a way to get the RGB of the two front case fans to sync with the rest of the RGB fans using L-Connect 3? I asked the question to Lian Li tech support, and they didn't give me any instructions but sent a link to a ARGB cable kit. The only thing I can think of is to use an adapter from the 5 V ARGB connector from the case hub to connect to the sync port on the UNI SLV2 controller. I just am not sure if this is what they meant. I did use the RGB cable from the Galahad AIO RGB to one of the sync ports and that does seem to work with L-conect 3. What do you think?
Hello Kinegos, welcome to my channel, I will get back to you on this as it's pretty late at my end, need to catch some sleep, but will reply you in my morning. Thank you!
Hi Kinegos, what your have mentioned about the Lancool 216 case fans. You are absolutely correct. Here is a diagram which will aid you imgur.com/PrPqFBt (download the picture if it's too small), btw, the converter is part of the lian li argb kit which you have bought.
@@KleoYan Hey Kleo! I wanted to follow up as I finally got the Lian Li ARGB Device Cable Kit which had the adapter cable I needed as in the picture you kindly linked in your comment. I'm happy to say it is working great now with the only small annoyance that every time I reboot I have to press the mode button on the 216 accessory RGB interface for 3 seconds to hand control over to the L-Connect app. It's still better than what I had before, but Lian Li really is puzzling that they make this new case with RGB controls but don't integrate it seemlessly into their own RGB software right out of the box. But really appreciate your help! Now I have about 10 cables I don't need as I just used the one cable out of this kit. 😂
@@Kinegos Hi, welcome back and am gald you got everything sorted out. That's one of the down side not only in Lian Li 216 argb controller. it happens to most physical controller which has a remote control. If it's software based, then you won't have this issue. This physical controller on the case do not remember the Mobo settles, you have to toggle it.
Hi TPW, welcome to my channel and you are most welcome.. I am just like you a PC builder and wanting answers with the help from Lian Li Tech Support that is.. advantage is. I can speak mandarin so it's easier for me to communicate with them :P, in return I did up a series and aid others as much as I can. Not all successful but at least a handful. Once again thank you to have visit and to leave your feedback, all the best with your build too. 😉
I only see a TAB for SL-Inf, but not TL-LCD. I do have the controller all plugged in. It detects it in other areas of the software. I can change what is display on the screen and change the fan settings, just not under Fan / Pump Profile.
Been driving me nuts trying to figure out ways to connect my V1 to my mobo turns out it’s just cuz I have the manual V1 guess I’ll go ahead and get the V2 box thank you !
Hi Bill Felix, welcome to my channel, I am glad this content did aid you. You are most welcome. Thank you for your feedback and all the best with your build too. 😉
Great video. All of your videos have explained the entire Lian Li fan ecosystem. As a recommendation, it would be nice to see how to integrate it with the Lian Li Lancool iii. For example, how to tie in the front ARGB fans, motherboard integration, etc.
Hello Iron Condor Simulation, welcome back, let me see what I can do about your request later as currently am waiting for Arctic's 420 liquid freezer to reach me. once again thank you for your suggestion and to have visit my channel.
@@mariopro519 hello and welcome to my channel. The lancool III fans have the similar argb 3pin Jst03 plug where you can plug to any argb port or fans in a SL or AL controller. But for the SL infinity controller. You can only plug the argb to sync 2 or sync 4 port. The fans you need to plug directly to the motherboard fan header.
Thanks for mentioning the different controllers. Me trying to plug an SL-INF reverse fan into a controller didn't work for me. Looks like my best bet is it is the wrong controller. Lian Li has great products. Terrible in showing how to connect fans, and what is required.
OK had to stop in and hopefully help others with Lconnect 3 being unresponsive. For me i had to unhook my monitor USB cable to computer. The Gigabyte FI32U has a hub with soundcard, i had the sound card disabled thinking that would help, nope. I tried different versions of Lconnect and none would be responsive, always click on something then about 30 sec to minute later it would change. Now its working great. Also i fixed Snowrunner being unresponsive when alt-tabbing out or clicking out of snowrunners window. Win 11 22h2 all updated and also newest drivers for everything. 13900k, 4090, 32gb gskill 7200, 5 m.2 ssds, 1 sata ssd.... :)
Thank you very much for your video. I bought the denier lian li galahad ii 360 trinity sl-inf. I am in Full Corsair. But I wanted to change brand. So I took out my Corsair AIO and put in a Lian li AIO. But I've kept my Corsair QL series for the time being. So I have L connect and ICUE at the same time. No problem for the moment. I'm waiting for my Uny fan revers :) I was wondering why my Lian li peripherals were appearing in my taskbar. But when I saw your video, apparently everything's fine because you've got it too. With Corsair nothing appeared. I also use the NZXT. On the other hand, I don't know why I get a little loading in the background every 5 minutes. If I cut L connect I don't get it anymore.
Hi Protect_Dreams, welcome to my channel, thank you for your valuable feedback. Now as for your background process, this I am not able to answer you but I do know that all argb programs make use of one common shared IRQ, which ended up applications might just grabbing for permission grant, this could be one of the cause.
been searching forever for someone to explain how! finally someone explains in details, one question though, can i connect lian li galahad aio to the unifan controller?
hello blaydemastah, welcome to my channel, the argb connector of the Galahad pump, you can connect it to the uni fan controller but for the pump connector, kindly connect it directly to your motherboard fan/pump header.
@@KleoYan ah thank you! Also one more question, can I connect the strimer v2 controller to the unifans controller? Or will I have to connect the strimmer controller to the motherboard?
@@KleoYan thank you ~ yes, I am just beginning a new white-theme build in a Lian Li case and with Lian Li infinity fans and Strimer. Your video has given me good ideas for how to properly connect those parts. Also a good tutorial on the L-connect 3 software. 👍👍
I was having issues with getting Lconnect to see the fans. Turns out my NZXT mobo came with a USB splitter, and that was causing problems. Fans still worked at full speed, but no control until I got rid of that splitter.
Hi Kid A, welcome to my channel, I am unsure what you are looking for. plus I do not have all the aios and such. if you are referring to Corsair and NXZT. do pardon me, I have tried asking but they have not reply on my request. the only stuff I have are here. imgur.com/gallery/zEKCkRf or imgur.com/gallery/wxrKnQd
The effects on the strimer L-connect is different than the one with buttons. I like the effects on the older strimer. But it is not available on the newer one and hopefully software update will fix that.
Only problem I’m having is the high CPU usage due to the L-Connect. Also is it normal for the fan to be shown as a removable device in the taskbar tray?
Hello Hanies, welcome to my channel. High useage of CPU can be caused by alot of resources sharing the same IRQ as the usb devices you have used or it could be other causes like background apps that make use shared program code that interfer with your L-Connect app. I am not able to tell you which, you will need to figure out yourself. for a start if you have alot USB connecting device, remove them all and slowly plug one at a time so see if it does take up the system resource which is shared with your L-Connect 3 app. (Excluding Keyboard and Mouse)
@@haies09 ok that might be the issue. you have two devices that runs argb program at the background, both are fighting for rigths as both make use of the same IRQ, therefore the conflict might start from there. so something which you will need to take note on... all the best with your troubleshooting.
Could you do a video or answer if you can connect additional rgb products to the Lian Li controllers? If someone has a non-lian li aio with 2 or 3 rgb fans (which means up to 4 possible rgb cables because older systems don't daisy chain), for instance, can you make Lian Li L-connect control them? What is the capacity, if able, of Lian Li controllers to control other rgb products? Thanks for this immensely helpful video. Every other video I looked for only talked about individual products and didn't really touch on combining multiple products.
Hi Christopher Chapman, welcome to my channel. As for non lian li argb products, you can plug but with a limitation. 1st the argb effects might not react the way you want it. 2nd you will need a coverter for it. same applies to argb strips you need the converter. I have a playlist of these lian li argb products which you might want to watch. ruclips.net/p/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm kindly note of the Dos and Donts video.
Great video, would have saved me some time when I started with the Lian-Li fans and software. Is there a way to control the RGB effects so they continue from one set of fans to another on the entire controller? I only manage to change it within one "bank" of 4 fans.
Hi Mikael Bäckström, welcome to my channel. For this you will be able to control the pattern within the Lian Li argb products as they are cater for only the uni fans and strimer plus in L-Connect 3 (Quick Sync Lighting). If you are talking about having your rams and GPU, that's not possible. Once again thank you for your compliment and feedback.
Hey i really enjoyed the detailed explanation, I just finished my new build and have installed 9 Tl fans on my pc, 3 lcd on the side 3 tl led at the bottom and 3 tl led at the top, so i replaced the standard fans that came with the lian li galahad lcd aio with 3 tl fans instead and connected them into the controller, so i am using 3 ports, however the three top fans are not lighting up or showing as connected in the software but they are spinning and working, on the l3 connect software it shows port 2 and 3 fans which are the ones at the bottom and the lcd fans on the side and it also shows the aio too. i been trying to find out why this is and i have checked everywhere but im not sure why this is the case, any information or help would be appreciated so much 🙏🏻
Hi adz_khr, welcome to my channel. I would advise you to do this. - Uninstall L-Connect 3 app, using revo uninstaller, ( www.revouninstaller.com/ ). Revo uninstaller will remove all unwanted files / folder / registry in your system. Illustration to use revo uninstaller ruclips.net/video/uMgUYiakpxM/видео.html - Next turn off your pc and do the connection as listed below. a) Connect your daisy chained 3 x TL LED fans (Radiator Top) to port 1 b) Connect your daisy chained 3 x TL LCD fans (Side) to port 2 (TL LCD fans will only work from port 2 to port 4, it does not work with port 1) c) Connect your daisy chained 3 x TL LED fans (bottom) to port 3 Once you have done the connection above. Boot up your pc, check on device manager to see if you are able to see the TL Controller listed under Universal Serial Bus Devices. Next install L-Connect 3 app, check for firmware updates. Test your fans and TL LCD again.
When is Lian Li going to release a multi pack version with controllers of thr SLINF140 fans in the US, the product has been released for 3 months now, but doesn’t seem to be showing up on any websites, AliExpress, or even ebay.
Hey thanks for the video! at 4:50 I connected the hub to all the connectors, the 5v and the argb on the ProArt motherboard, they work and I can control the fan speed through bios, but, the RGB lightening is not working, any idea why?
@@Shepard7 I see, if you look at your uni controller. There are total of 6 port, which 4 of them are labeled as 1 to 4 (7pin socket) and 2 are labeled as sync 2 and sync 4 (3pin socket). As I have mentioned to you, for your radiator fans, use the SL Inf 120 individual pack where the cable is split to 4pin (pwm) and 3pin (argb). Connect the 4pin to your motherboard fan header (CPU_FAN) then the 3pin to the uni controller Sync 2 or 4. This way, you control the PWM using the motherboard instead of the uni controller and control the argb using the L-Connect 3. and to control the argb in L-Connect 3. You will need to have fans connected to port 2 which sync 2 will response to / port 4 which sync 4 will response to. For the rest of your SL Inf 120 (case fans), use the 7pin cable to connect from the fans to the uni controller. So both PWM and ARGB is controlled by the uni controller using L-Connect 3. As why doing this. In the event if the uni contoller malfunction. The radiator fans will only affect the argb effects but not stopping the fans from spinning accordingly to your motherboard pwm settings. This is just a safety measure.
@@KleoYan Thanks a lot, but I didn't get the cables for single fans, I bought the 3 fans set, and I use it for 2 top and 1 rear. So I'm limited here, no USB available slot, that's why I do it. Someone mentioned I can control the ARGB without L-Connect3 software, is that true?
@@Shepard7 Hi I am so sorry, the way I reply you is meants for another viewer. I got confuse with replying comments.. so sorry. ok for your case. if you got the 3 pack set. you have no choice but to make use of the uni controller which require the USB connection to your motherboard. if you are limited to USB 2.0 Header on your motherboard, you might want to get a Internal USB hub that is with the sata power connector, like the NXZT Internal USB hub. nzxt.com/product/internal-usb-hub-gen-3 the second question you asked. yes it is possible without using L-Connect but you will only be able to do this if you buy the individual pack as the cable is not in 7pin but in 3 and 4pin, 3pin argb and 4pin pwm, where you can plug directly to the motherboard Fan and argb header. then use the motherboard utlity to control the argb effects and the fan load (PWM). but make sure you check the load limit of the argb, do not daisy chained more that 4 fans and plug to the motherboard argb header.
My firmware won’t update on my SL120 fans I have v1.2 but it says v1.8 is available but says “unsuccessful”, then the device disappears and pops back up
Both my ARGB header on my motherboard doesn't work (I believe they are gone for good) But with this product i don't have to toss my my ARGB fans, correct? Since this allows me to bypass "Motherboard" for ARGB Fans
Hi AP's Journey, welcome to my channel. the argb cable which is between the Lian Li controller / hub to your motherboard ARGB header is optional. you can don't use motherboard argb utlity at all, just remove that cable and make use of L-Connect 3 app to controller the argb effects which the command is from your motherboard USB header to your Lian Li controller / hub. then to your uni fans.
Hi man I had a question about the sl120 v2 fans. I’m planning on not using lian Li controllers but razer chroma controller so I can control 10 of these fans from my motherboard and other software. If I daisy chained 3 fans by sliding them together x3 (3 at top, 3 at bottom and 3 at side then one fan at the rear), can I plug the 4 ARGB headers into one razer chroma controller and then the PWM cables to the motherboard sys fan header (cpu fan header for the fans on a radiator)? Also, if I daisy chain 3 at a time by sliding them together will I be able to control each fans RGB individually through my motherboard or will my mobo only see the 3 daisy chained fans as one group(e.g. can I make one fan red, one blue, one green or can I only make all three one colour if they’re daisy chained).
Hi Power, welcome to my channel. I am only able to answer what I know. If you purchase the SL120 V2 fans as single pack. you can plus the fan's argb to the motherboard (covertor included) and the fan load to your motherboard fan header. AS for the Chroma controller, I have no experience on that but if it takes in normal argb 3pin 5volt standard argb connectors, then it should not be an issue. The only thing you need to take note is the load capacity. please check the specs of the Chroma controller, see how much ampere it can cater for and to check the SL120 V2 ampere too. As for the effects you are asking, this greatly depends on how Chroma design the argb effects and same applies your motherboard argb utility.
what's the reason that the SL infinity RGB is not turning on at all but the fans working fine, did all troubleshooting SL infinity controller shows in both device manager/L connect software and its firmware/chipset/bios all up to date. even ordered 3 new fans connected them with new sl infinity controller and wires fans worked but rgb still does not work? also when i connect the sl infinity controller both the old or brand new one to sata power in psu only the sl infinity controller nothing else, it doesn't let pc to boot or turn on shows a red light but when you connect sl infinity controller to cpu/pcie in psu pc boots normally fans work but rgb doesnt work? when i connect sl infinity controller and fans both my old one and new one in my other pc it works flawlessly both rgb and fans. dont know why it has issues with my main pc did everything cleared cmos bios flashed latest bios uninstalled all rgb apps with revo uninstaller but rgb still dont work only fans motherboard is msi z790 motherboard and cpu is core i 9 1200k intel cpu. i have 3 sl infinity fans with regular cables no sl infinity controller that connects to fan and rgb header on the motherboard those works fine and when i tried and connected that regular cables with my old fans they also worked both rgb/fan so now i think the only way i can fix the rgb for my other 6 fans finding 2 new regular cable that connects straight to motherboard fan/rgb header will fix my issues since even ordering 3 new sl infinity fans and a new sl inifity controller that even didnt work only fans worked rgb didnt turn on.
Hi Adam Otak, welcome to my channel. It seems like a motherboard issue. have you tried changing the USB header of your motherboard or try this 1) Turn off your system, switch off the PSU botton to off 2) switch off main switch which provides power from the AC cable to your PSU. 3) press your power button of your case a couple of times to discharge any current holding on your motherboard 4) leave it for 45 seconds. 5) plug everything back on and turn on your system. see if the steps above resolves the issue.if not, last resort, get a spare nvme m.2 or 2.5" ssd, install fresh windows OS and try it. if all these still does not help. then I have no clue what's going on but to pin point on your motherboard.
Hello Kleo, I recently updated my L-connect 3 together with my SL120 Infinity fans firmware. But ever since the updates everytime my pc restarts or turn on the L-connect doesn't save my rgb settings and it keeps reverting to rainbow effect each start up. Any clue?
Hi Grizworth, welcome to my channel. everytime you update the L-Connect 3 app, it will first remove the necessary settings and bring back to default. Best way to counter this is to export what you have set, so once you lose your profile, you can import it in. There is an import or export button at your SL Inifinity dash board in L-Connect when you set the argb effects lian-li.com/l-connect3/l3-manual_backup/#elementor-toc__heading-anchor-3
Hello Dexter Gilapay, welcome back. On L-Connect 3, go to settings where you have the minimise when closing windows. Unchecked that and uncheck auto run. With the l-connect 3 app display still on. Shut down your pc. Boot it up again. Then launch l-connect 3 app. Enable back the two functions and still having the l-connect 3 on, shut down your pc again. Then turn it back on. I did have the same issue like yours and I did that. Give it a try.
Hello Simon Austin, welcome to my channel, are you able to check what's the process usage as in percentage of L-Connect 3 app? maybe you want to try remove the app and reinstall the app, use Revo Uninstaller to clear off all the unwanted files and registry before you do a clean install of the L-Connect 3 app.
Noted on not to mix & match. But can I have 120mm TL and 140mm TL connected to a single TL controller? I'm not sure if fan size matters for controller even though they're of the same TL fans. Very informative vid!
Hi Peter Joy, welcome to my channel. So long your daisy chain set is to one port, you will not have an issue. Example Port 1 are all 120mm TL fans and port 2 are all 140mm fans. Not forgetting once you have done that, go to your L-Connect 3 app and set the fan profile for 140mm to it's 140mm profile.
@@peterjoy1713 you are most welcome. All the very best with your build too. hmm maybe this might aid you further as a number of my viewers benefit from it. It's not about MX6 thermal paste but more on how I apply paste which to me 98% with good results. ruclips.net/video/xZ2R4roF1_Q/видео.html. the trick is, you do not need thick layer of paste, just a thin layer and sufficient enough for your coldpate to contact the full surface of the IHS.
@@KleoYan Yes! I had been doing the same application method (with painter's tape) on my previous builds. Though I've been doing away with thermal paste as of late and having great success in using PTM7950 instead, surprisingly. I initially experimented with repasting my laptop with good result in bringing temp down. Then I went to my PC and re-pasted my CPU and GPU. It has been about 4 months since application but here's the before -> after results as of today: CPU avg 59.6 C -> 47.5 C. CPU max 75.1 C -> 64.1 C. GPU avg 33.0 C -> 28.0 C GPU max 35.0 C -> 29.0 C. GPU hotspot avg 43.5 C -> 38.8 C GPU hotspot max 46.5 C -> 39.4 C. I'm curious if these results stick over time which I hope so. I will keep monitoring. My new build will likely use PTM7950 as well. Thanks again! I am subscribed and looking forward to seeing your next contents!!
Thanks for the video. I have an issue with my Strimer. I recently installed the 24 pin v2 strimer and the 12vhpwr v2 to my lian li inf hub like you showed in one of your videos. My issue is that upon startup my system RGB from lian li inf fans synch with my motherboard as they should but my Strimers dont do that. They stay in default rgb color. They only synch up with motherboard when i startup L Connect 3. Is there a way to solve the issue? Thanks in advance :)
@@KleoYan i plugged my strimer v2 hub to my lian li inf hub with a splitter. i have 10 fans (3 bottom, 3 side, 1 in the back and 3 up connected with my nzxt z79 aio cooler) all of them connected to the inf hub and now the strimer hub is now connected there too. The only thing i added there too is the NZXT internal usb hub since my motherboard only has two usb 2.0. The AIO and the Lian Li Inf hub is used with the NZXT usb hub. Thank you for your answer. I really appreciate it :)
I have 10 SL-INF fans. 3 top fans for AIO, 3 in front, 3 side and 1 in the back. Now if I connect all of them to 1 controller... do I have plug the controller into SYS_FAN? I understand that top AIO fans will not turn on until I'm booted into Windows. I kind of wish them to turn on when PC is turned on. What are my options?
Hello Ivo Kurzemnieks, welcome to my channel. as what you've mentioned, you can choose to use the L-Connect 3 to control the RPM and argb, you need not have to plug anything to the motherboard fan header, unless you wanted to control the RPM via your motherboard UEFI or it's utility software. as for the boot up, there are no other options, you will have to load to windows inoder to kick start L-Connect 3.
Hi Kleo Yan, I have the old strimmers types (Qty 2) and wonder if I can plug them into a new UNI fan SL-INF 120 controller which has no fans plugged into it, as I want to try and control all my lighting through Connect 3. I already have the Galahad II pump AIO controller in my system but all the ports are full with fans and the pump. Can I use a second controller to run my strimmers? I am stuck with this problem on how to add my strimmers. I hope you can help. or should I purchase the new Lian Li Strimer Plus V2 24-Pin ARGB Motherboard Extension Cable and Lian Li Strimer Plus V2 Triple 8-pin ARGB GPU Extension Cable which come with a controller?
Hi Mal Anderson, welcome to my channel. for your case, you will need a strimer plus V2 controller (www.aliexpress.com/item/1005004239607087.html?) and does your motherboard have another USB 2.0 header? normally a board is equip with 2. if both are used up, you will need a USB Splitter (www.aliexpress.com/item/1005005121350909.html)
Hi Kleo, after several months, I finally got my whole pc from LianLi :D Everything works perfectly but... Is it normal that the device manager detects LianLi-SL-Infinity-v1.4 and LianLi-GA_II_LCD_v1.3 and allows to "eject" it? I have 10 SL-Inf connected to the Galahad 2 LCD SL Inf controller. Thank you!
Hi Varo Go, welcome to my channel. As device able to be ejected, that's normal as any detachable USB devices will have this function in Windows. on my lower right corner of Windows 11, when I click on the USB Icon, I can select my GA II LCD to be ejected, but of course not going to do that, just let it be. If accidental click on eject, all is needed is to either go device manager to scan for hardware or to reboot your system.
I can only get 2 out of 4 plugs to work I have bought multple controllers. I'm about done.. I can only power two sets of fan the other two plugs show the fans at 0 rpm and will not tuen on with the others...
I fusing the L-Connect 3 software to control your CPU & GPU fans (AIO Coolers) rather than connecting those fans headers to the motherboard. In the software you can say "This group is controlled by CPU/GPU temps" but what happens in BIOS, or even a dual boot system with an OS that doesnt run the software? Will those fans run automatically from the signal from the pass-thru connection of the controller, run at full speed, or not run at all?
Hi Vicious Computers, welcome to my channel. For your case, it will run at silent mode and does not pickup from your bios even if you did plug the cable between the controller to your motherboard PWM fan header.
@@KleoYan Ok, good to know. I'll need a few single fan cables that break out to the separate aRGB and PWM Fan connection then will put them on the controller in a sync port and plug the fans into the motherboard directly most likely. I do not dual boot linux anymore I just use WSL or use a VM and in bios silent mode would be good enough due to the low demand on the system, but kinda still "better safe than sorry" Just would be nice to control everything from one place and not need another software for those fans.
Hi, thanks for the thorough video! just one quick issue I have, I'm unable to control my fans with L-Connect 3 at all - I only plugged in the standard USB cable + SATA and no response from when I make changes in L-Connect. It's able to acknowledge my controller and fans, so everything is connected. Just not sure why the settings aren't applying from L-Connect.
@@dubchung hi welcome to my channel, did your temperature in l-connect 3 respond when u do some benchmark. If your temperature readings do not move that could be the issue.
Hello friend, can you help me? I also have an nzxt hub but the l conect does not recognize my strimers and fans, can you help me??? I already updated the motherboard drivers in the manager, lianli does not appear in the drivers, I cannot make it work in any way
Hi Yuri Ferreira, welcome to my channel. Did you test it without the NZXT internal hub. Do it one controller at a time. does your Windows OS detect the controller? Sequence as follow 1st plug uni fan controller. does it detect? if yes, remove the controller, plug the strimer plus V2 controller. does it detect? if individually detects, then plug your NZXT Internal hub. if it does not work, means you either did not plug the sata power source to your NZXT Hub or your hub is faulty.
Hi again Kleo, I had a question on how to connect the lian li uni fans sl infinity to my motherboard, I’m using an MSI Mag b550 wifi max motherboard and it only has 2 argb headers. One at the bottom of the mobo and 1 at the top i plan on using the galahad 2 trinity on the side of the case which is the lian li o11 vision, 3 fans at the bottom and 2 on the rear as exhaust, i need help as to how im going to connect these fans into the argb headers on the motherboard and have no clue. Would there be an option of not plugging these in at all and still having the fans rgb with the lian li l-connect 3 or is it mandatory to plug all of these fans in. Sorry if this is long im just very very confused and this is also my first build.
Hi Fisnik Hoxha, welcome back. Your Uni fans on the Uni controller, you do not need to plug it to your motherboard ARGB header. You can use the L-Connect 3 app to control the Uni fans. So that will save your issue.
Hi cookiecook1000, welcome to my channel. It’s good that you asked. Kindly do not do that. Strimer plus draws a lot of ampere, that’s why it has its own controller / hub. As for the 216 fan ARGB. There are no dedicated dash board in l-connect 3 app but you can plug to any Uni controller that has a sync 2 and 4 port.
Lian Li should make V3 consolidate this issue across all their RGB products. People who buy Lian Li fans are more likely to buy Strimer Plus cables like me and the fact they don't consolidate this is a head shaking moment.
Hi Snow Coconuts, welcome to my channel and Merry Christmas. This I have to agree with you, infact best if you can highlight this at Lian Li reddit and have others to support your idea which is good in my opinion. www.reddit.com/r/lianli/
Great video👍! I do have one question if you can help me: can I connect 2 L-connect-3 hubs (3 fans in each controler) and a strimer v2 hub (24-pin cable and 8-pin gpu cable) into a single ARGB header on the motherboard with a splitter? Or would that be to much for the header?
Hi Sebastian Oana, welcome to my channel. Yes you can do that as all the argb devices are drawing current from it's controller. Just make sure that the sata source are plug to your various lian li controllers.
Hi Kleo! Really great videos as I am trying to troubleshoot my rgb case but none seem to have worked for me in terms of Lian Li's Dynamic Evo case RGBs, not sure if you have come across this issue before? Thanks!
Hi Hikyubeast, welcome to my channel. Maybe list down what are the lian li argb products and to let me know what kind of liquid AIO or air cooler, inclusive of your motherboard you are using. Then I will try to help you out. if you need to show me pictures, you can send to my email @ godzylatech@gmail.com
Hello Forested. Welcome to my channel. L-Connect 3 app will not be able to control your SL INF fans with the Uni controller. Unless you don’t use L-Connect 3 app and to make use of motherboard ARGB app, then connect them directly to your motherboard and please take note of the ampere when you do that. Check your motherboard menu what’s the max load for ARGB and Fan load of each header.
@@KleoYan Hello, thanks for your reply. My motherboard is the Gigabyte Z790 Aero G. Will it be able to control the RGB simultaneously with it as well? Also, is it okay to buy ARGB splitter extension cables for my fans? (3+3+1+3 cooler)?
@@forested I would advise you to use the Uni controller but if you do not want to. Get a ARGB hub with power supplied from your PSU. Getting an ARGB splitter for the quantity of fans plus your other ARGB devices. The motherboard ARGB header will not be able to provide the ARGB load.
Hi Steven Cooley, welcome to my channel, you are not able to use the L-Connect 3 without a controller or hub (Uni fan controller or Strimer Plus V2 controller), which specifically taking instructions from L-Connect 3 app. The case argb controller does not pick up the instructions from L-Connect 3 app, therefore you will have to connect it to your motherboard and to use the motherboard utlity to control the argb effects.
Hi Vu Hoang Thuan, welcome back, L-Connect 3 does not control your GPU fans, it will only monitor the temperature. as for your error, I have no idea why it pops up. have you try swaping on L-Connect 3 PWM dashboard to monitor CPU instead of GPU?
@@vuhoangthuan326 I see. Have you tried re-installing the L-Connect 3. Before you re-install it. Totally remove the app using revo uninstaller. See if it works.
Really nice video! I will install soon several tl lcd + normal ones so if i understood everything (i am French :D) i dont need to use pwm and argb 5v ports because usb will do the job if i go through Lconnect3, right ? Thank you very much
This video is awesome ! one question though with the new lian li infinity hub and the new strimmer v2 hub can we do the same method of linking them with the arbg cable kit? I have all the cable just need to know if it is ok to do still? So I can control both with L Connect 3? Or is a usb hub needed?
Hi Anthony Lowe, welcome to my channel. Both has a controller. You will need additional USB header will do. If you choose to plug the strimer plus together with the uni controller, it might not work as in, the strimer plus will not reflect on the L-Connect 3 dashboard, therefore you lose the argb patter effects.
Hi, my fans went full speed from the software. I had to switch controllers to stop it from spinning at max rpm. How do I prevent this from happening again?
@@chr4me ok try this. 1) Make sure your motherboard bios is up to date, please check on your motherboard manufacture website, under support > bios and drivers. See if there are issues with USB and do they have a fix. If there are, kindly update those bios firmware version. 2) Make sure your chipset driver for your motherboard is up to date! For AMD will be at www.amd.com/en/support for Intel will be Intel Driver & Support Assistant Intel DSA www.intel.com/content/www/us/en/support/detect.html 3) Remove all argb apps (Asus Armory Crate / MSI Dragon Center / Giga Fusion / Asrock Polychrome). If the brands which I have mentioned, do have a uninstall tool like the Asus Armory Crate, use that, else use Revo uninstaller ( www.revouninstaller.com/ ). Revo uninstaller will remove all unwanted files / folder / registry in your system. Illustration to use revo uninstaller ruclips.net/video/uMgUYiakpxM/видео.html 4) Shutdown your PC, unplug the PSU cable from your AC outlet. Press the power switch twice to discharge all current that your motherboard is holding. Leave it for 45 second 5) Plug Uni controller with one fan 6) Plug the power cable and turn on your PC 7) Go to your Device Manager, look under Universal Serial Bus Devices, make sure you see the Lian Li uni controller 8) Install the L-Connect 3 app only lian-li.com/l-connect3/ 9) After installation, run L-Connect 3, check under Setting > General > make sure Auto-Run on Boot and Minimized L-Connect 3 to system tray at close are ON. 10) Reboot your system. 11) First thing you need, go to device manager and see if the Lian Li controller is listed, next open up the L-Connect 3 app. Check if there is a need to update firmware to your controller. Go to Settings > Update, under Device F/W version, click on Update Check, download and install the firmware. Make sure the firmware is completed. Do a check on device manager and make sure the Lian Li controller is listed. 12) On L-Connect 3 dashboard, check if the CPU and GPU readings are reacting, you might want to test it using some benchmark programs. If there are reaction, play with the PWM and argb functions. If it does not work, skip step 13) and proceed step 15) 13) If Single controller works, shutdown your pc, connect uni fan set of 3 to your output of your uni controller. Do it small steps at a time to hook up your sets of fans. do not do all in one go. If successful and you have a second controller, proceed small step at a time again. 14) Slowly plug back your USB devices (Headset, Microphone, Printer, USB Capture Card and etc). At any point of time as you add those devices one at a time, if L-Connect 3 become unresponsive. This tells you that there power is insufficient to power up more USB Devices. Whatever USB port on your motherboard, there is a limitation as the current are shared across the board, be it front or back I/O and the internal USB Header. You might need to get a Internal USB Hub that comes with a Sata Power source to the Internal USB Hub. (Disclaimer, buying a internal usb hub might or might not resolve this issue, purchase at your own expenses) 15) If it does not work, report your issues to Lian li Tech Support. There is a in build log ticketing system in L-Connect 3 app. this is what you need to do. Go to Settings > Support > Click on “Download log” place a filename and choose a destination drive to save the log file. Next click on “Report” it will take you to Lian Li Tech Support FAQ. Fill up the form and upload the log which is a zip file.
Hello! I’m from Singapore too! Thank you so much for your hard work in making this video~ I would like to ask about the Lianli strimer plus. Can I use L connect or L connect 2 to control the strimers? I have a triple 8 pin and a 24 pin. Both are v1. I have the v1 controller, but it seems like a purely manual controller that I have to open up the case to change the lighting effects, also there are only 7 colours and no gradient rgb effect. If I want gradient rgb, I have to press m1 to pass the control to the motherboard software, in this case I have a asus motherboard that uses armoury crate and the lighting effects in armoury crate are the opposite. That means I can have gradient rgb but I am unable to achieve the lighting patterns of the controller. Is there a way that I can get more rgb lighting effects like by using another software without opening the case every time I want to change the strimer plus lighting effects? I do not have any lian li fans, I only have strimer plus v1 and the v1 controller. When Thank you!
Hi Imogen Infinity, welcome to my channel. You have two choices. 1 is to purchase a Strimer Plus V2 controller. you can refer to these video ruclips.net/video/J76Zyd1GzNA/видео.html or ruclips.net/video/uWNZO2HVgxE/видео.html. 2 is to try out Signal RGB, this is an application which others are talking about which you might want to search from google or youtube about this app. I myself have not tried this but you can do some reasearch about it.
i am using galahad aio 360, i have connected the fan and rgb wires to the mobo. do i use the controller connection method before i can use the software to control?
hi DX Liu, welcome to my channel. if you are having uni fans on your galahad, it's good to have fan connectors to your motherboard and plus the fans to the uni controller, use L-Connect 3 app to control the argb effects.
I know this is a year-old video but I do have one question. L Connect 3 doesn't show my CPU fan speed under the System Resource tab like I see in your video. There's no graph at all other than Temperature and Clock Rate. The "Fan Speed" bar doesn't show at all for me.
Hi The Kontrarian, welcome to my channel. Mind if I ask if you have other argb devices or argb programs running before L-Connect 3. Also just the controller itself. is your windows able to detect the controller, under Device Manager > Universal Serial Bus Devices.. last but not least, can you listen down the PC components in details, else I can only diagnose in general.
@@KleoYan sure thing. Thanks for responding. My setup I have 10 Lian Li SL Uni 120 fans. 3 on top as exhaust, 3 reverse blade on the bottom as intake, 3 reverse blade mounted on a side radiator as intake (NZXT Kraken 360 Elite) and one rear fan as exhaust. I have the Lian Li controller with all fans going through the controller. No groupings daisy chained. 3X3X3X1 into each port of the Lian Li control box. Control box going in a USB header. Not using the separate cable connected to the control box to the motherboard to bypass L Connect 3. My AIO cooler I removed the default fans that came with it and installed 3 Lian Li reverse blade fans instead. The NZXT AIO pump is going into my CPU FAN header. The NZXT AIO has a program NZXT CAM software to control fan RGB and fan speeds. But I’m not using the default fans so no RGB functions or speed control. No other RGB going into the motherboard. My RAM is RGB but controlled by the motherboard. Gigabyte B650 Gaming motherboard does have built in ARGB (Gigabyte Control Center) to control RGB but only the RAM RGB I can alter being I don’t have the Lian Li control box connected to the motherboard with the extra cable. I am controlling all fans with L Connect 3. Only one control box. No strimmer extension cables or additional USB hubs. Device manager recognizes the Lian Li controller. Firmware and Lian Li software up to date. Latest bios on motherboard and Windows 11 Pro.
@@KleoYan I can control all fan speeds, RGB etc with the L Connect 3 software. However, I doesn’t show CPU fan in that window likes yours does. Also it doesn’t show a picture of my uni fans at the top of the speed control like yours does.
@@TheKontrarian on your motherboard UEFI, have you set the fan mode to PWM instead of Auto. that could be the issue. give it a try and on L-Connect 3, make sure the fans you are using are highlighted. It's under settings of your L-Connect 3 app lian-li.com/l-connect3/l-connect3-manual-2/. btw why do you connect your pump to the CPU_FAN? you should be pluging your pump to AIO_Pump hmm.
@@KleoYan I will give it a try. I know the fan mode is definitely set to auto in the bios. As far as where to plug in the AIO. On the motherboard at the top I see CPU_OPT, CPU_FAN, and SYS_FAN1. I didn’t see a PUMP fan header at the top like I have seen on some motherboards. However, all the way at the bottom of the motherboard I do see a SYS_FAN3_PUMP. Should it be plugged in all the way down there? I thought it would be rather odd. That’s the only reason I plugged the pump in the top CPU_FAN header at the top. The motherboard is a Gigabyte B650 Gaming X V2 motherboard. If you’d like to see pictures of it.
Hi Claus Bohm, welcome to my channel. If you are using 2 x GPU, you will need two strimer plus V2 controllers and yes L-Connect does detect both V2 controllers with separate controls on the L-Connect 3 application.
If anyone of you have the issues with L-Connect 3 app, below are some troubleshooting steps Basic Troubleshooting steps Disclaimer : Though the chances are very low to brick firmware updates on motherboard and to any controllers. I will not be responsible if you have brick your motherboard or controller. 1) Make sure your motherboard bios is up to date, please check on your motherboard manufacture website, under support > bios and drivers. See if there are issues with USB and do they have a fix. If there are, kindly update those bios firmware version. 2) Make sure your chipset driver for your motherboard is up to date! For AMD will be at www.amd.com/en/support for Intel will be Intel Driver & Support Assistant Intel DSA www.intel.com/content/www/us/en/support/detect.html 3) Remove all argb apps (Asus Armory Crate / MSI Dragon Center / Giga Fusion / Asrock Polychrome). If the brands which I have mentioned, do have a uninstall tool like the Asus Armory Crate, use that, else use Revo uninstaller ( www.revouninstaller.com/ ). Revo uninstaller will remove all unwanted files / folder / registry in your system. Illustration to use revo uninstaller ruclips.net/video/uMgUYiakpxM/видео.html 4) Shutdown your PC, unplug the PSU cable from your AC outlet. Press the power switch twice to discharge all current that your motherboard is holding. Leave it for 45 second 5) While waiting, please do not use KVM switches. Disconnect all devices that are connected to your motherboard (front / back IO). Leave only your Keyboard, Mouse , Monitor and Ethernet (If you have) connected directly to your motherboard. If your monitor has a KVM build-in, remove the USB cable from your monitor to your motherboard USB socket. If your mouse and keyboard are connected to your monitor, please remove them and plug them directly to your motherboard instead. 6) Plug only one Uni controller or Strimer Plus V2 controller. If its for Uni Fan (SL/AL) use only 3 fans to an output of the uni controller. 7) Plug the power cable and turn on your PC 8) Go to your Device Manager, look under Universal Serial Bus Devices, make sure you see the Lian Li uni / strimer plus V2 controller. 9) Install the L-Connect 3 app only lian-li.com/l-connect3/ (current version 1.3.16) 10) After installation, run L-Connect 3, check under Setting > General > make sure Auto-Run on Boot and Minimized L-Connect 3 to system tray at close are ON. 11) Reboot your system. 12) First thing you need, go to device manager and see if the Lian Li controller is listed, next open up the L-Connect 3 app. Check if there is a need to update firmware to your controller. Go to Settings > Update, under Device F/W version, click on Update Check, download and install the firmware. Make sure the firmware is completed. Do a check on device manager and make sure the Lian Li controller is listed. 13) On L-Connect 3 dashboard, check if the CPU and GPU readings are reacting, you might want to test it using some benchmark programs. If there are reaction, play with the PWM and argb functions. If it does not work, skip step 14) and proceed step 16) 14) If Single controller works, shutdown your pc, connect uni fan set of 3 to your output of your uni controller. Do it small steps at a time to hook up your sets of fans. do not do all in one go. If successful and you have a second controller, proceed small step at a time again. 15) Slowly plug back your USB devices (Headset, Microphone, Printer, USB Capture Card and etc). At any point of time as you add those devices one at a time, if L-Connect 3 become unresponsive. This tells you that there power is insufficient to power up more USB Devices. Whatever USB port on your motherboard, there is a limitation as the current are shared across the board, be it front or back I/O and the internal USB Header. You might need to get a Internal USB Hub that comes with a Sata Power source to the Internal USB Hub. (Disclaimer, buying a internal usb hub might or might not resolve this issue, purchase at your own expenses) 16) If it does not work, report your issues to Lian li Tech Support. There is a in build log ticketing system in L-Connect 3 app. this is what you need to do. Go to Settings > Support > Click on “Download log” place a filename and choose a destination drive to save the log file. Next click on “Report” it will take you to Lian Li Tech Support FAQ. Fill up the form and upload the log which is a zip file.
@@bergdk237 Hi, welcome to my channel. so long you do not over add too many argb devices, hubs, controllers, more fans more led strips and such.. it will be rock solid stable. If you asked me, there are only bugs, no instability issues. I get most of the PC builds for my friends or colleagues which works flawlessly without instablity issues. Most bugs are fixed anyway. For info on what are the fixes, kindly refer to the log lian-li.com/L3-changelog/. Also in most of my builds, I dont use motherboard argb utitlies, on top of this. I often make use of ASRock motherboard where you can turn off and on the argb effects within the UFEI / Bios without installing argb application in windows.
@@KleoYan Thanks, I got some AL120 fans(the 3 pack) Should I just go straight to installing L connect 3? Or would it be better to just Install L connect 2?
@@bergdk237 go straight L-Connect 3, follow this video guide, be patience and it will eventually work out for you. also take note on some important points which I've pointed out in this video. Rest will just rush it and rant about it and blaming L-Connect 3 is the cause of it. Infact it's not.. just that the argb IRQ in windows is shared, therefore all argb utilities are fighting for top piority to use the same IRQ which ended up instablity, crashes, delays and many more. Just keep argb application simple and to use suite devices. unlike some which add argb aio pump block, LCD display and such.
@@KleoYan ok thx, it is the only Argb fans ect. I got at the moment, only got RGB ram, rest is not RGB. so it will be very simple for now. I mainly got them to test them out in my current pc to see if I like Lian li Argb fans and software and controller, before I upgrade my system later this year.
Hello mint hos, welcome to my channel. Yes everyone wants a one hub does everything. Maybe it will be a good idea to post your comment at Lian Li's reddit page, at least they will see comments and might come out with a solution www.reddit.com/r/lianli/
Hi, I bought 3 lian li fans, the first is a Lian Li UNI FAN SL-INFINITY 120 RGB (No controller included) and the other two are Lian Li SL Infinity 140mm (Without Controller). I connect the fans to the following fan hub: "Thermalright ARGB Fan HUB", that hub is connected to my B650E-F motherboard. The fans work, they turn on the default RGB, but in the L-CONNECT 3 program the fans do not appear so I cant control the RGB and RPM. What did I do wrong? What I can do? all the best.
Hi lain, welcome to my channel. Lian Li uni fans do not work this way. You need to have its own Uni controller/hub to work with L-Connect 3 application, as there are specific firmware on the Uni controller/Hub. You can’t just use other brand hub.
@@KleoYan I understand, but if the uni fan-sl-infinity I bought them separately which means they didn't come with the controller, what option do I have? Because I was looking and I can't find that controller to buy separately, Only the pack of three fans is the one that comes with the which was not the one I bought, since I got all 3 separately. . I forgot to mention that I have the lian li strimer V2 (controller included) and they do appear in the L3-CONNECT (Ver 1.74)
@@lain1178 Hi, that's for sure as there is a strimer plus controller. as for the SL Inf controller, not sure if you can see this www.aliexpress.com/item/1005004600755700.html (Black) and www.aliexpress.com/item/1005004600649607.html (White)
Hey, do you have a video on your channel showing how to wire properly the O11 Dynamic Evo, Strimer Plus V2 and Uni Fan SL-infinity? I have trouble with it. Do I have to plug the 5v RGB from each controller and case? If yes, do you plug it for example the case rgb 5v into the fan controller and then to the MoBo? Or does it have to go directly to the MoBo? What happenes, if I dont plug the 5v RGB? Thanks in advance! You do very good videos!
Hello SKY, welcome to my channel and sorry to say I do not have this case, therefore not able to advise you on the connection. You might want to ask others at lian li Reddit forum. www.reddit.com/r/lianli/
Quick question. I'm using this program for my strimer cables but I have a different brand of fans in my case. Is that why I don't have the options to change fan settings?
Hi Kirk Russell, welcome to my channel. you will only get to use the L-Connect 3 application when you have the uni controller, it does not work when other brand fans are just connected directly to the motherboard via the fan header or the argb header.
I have the 12vhpwr v2 strimer and the 24 pin v2 strimer. Problem is i cant even get them to light up or even show up in l-connect 3. Are they not compatible?
Hi JP Kix, welcome to my channel. Do a basic check, are you able to see the controller under device manager? if yes, you might want to do a manul firmware update. You might want to refer to this content ruclips.net/video/CgvuUFeff8U/видео.html I do understand is lenghtly but take your time to digest and to understand how it works.
I'd like to see all these Lain Li equipment connections. 1.UNI FAN SL-INFINITY 120 Triple Pack 2.UNI FAN SL-INFINITY 120 Single Pack x 3 3.Galahad II Trinity SL-INF 360 4.Strimer Plus V2 24-PIN and 8-PIN
@@kwan.sukkitroj hi welcome to my channel. Just for your info, you will need 3 controllers. 1st is the SL-Infinity controller which you can hook up to 4 of your fans. Next is the Strimer plus controllers for your 24pin and 8pin stripes and last will be the controller for your Galahad II Trinity SL-Inf 360 (this you can't combine to one SL-Inf controller) as for your reqest, do pardon me. I have donated them to charity, unable to illustrate to you.
@kleoyan i think my situation applies to this post also, but i want to make sure… so i have the galahad II lcd sl infinity plus 6x sl infinity reverse plus 1x sl infinity for rear exhaust plus the 3 sl inf that comes with the aio. Can i connect all of them to the hund that comes with the aio or should i buy the sl infinity hub (the one with the sync ports) for the fans only and leave the aio one for only the galahad and the fans included ? Really appreciate if you can clarify this for me 🙌
Hello man, great video bro. Can you tell me if I can control the argbs of the lian li infinity fans without connecting the controller to the usb connection, just with the argb connector on the motherboard?
Hi Lucas Duran, welcome to my channel. You can do that with a individual pack. If you get the tripple pack, it will not be possible. If you do get individual pack, make sure not to daisy chianed more than 3 fans to each of your motherboard fan header, as each of your motherboard fan headers have a load limitation.
@@lucasduran6753 it greatly depends on how many controller you intend to plug to your motherboard, but if you do need a usb extender, I would advise you to get this instead of the NZXT internal hub. www.aliexpress.com/item/1005005121350909.html
Hi, awesome video but I have a question, I got infinity fans and how can I control them using motherboard bios? As I see an argb port but not pwm port so I'm confused on how to do it, I got an asus motherboard.
Hi Vigilante, welcome to my channel. if you have the argb and fan cable connected between your uni fan controller / hub to your motherboard, in L-Connect 3 app, set to motherboard mode on at Quick Sync Lighting. as for your motherboard to control, you might need your motherboard utitlity, example Armory Crate for Asus, Mystic for MSI or Fushion for Gigabyte or Ploychrome for ASRock.
Hey, what would you recommend my RPM to be at? I built a PC and just noticed my quiet RPM was 1200 so my fans were always loud. So I changed my base RPM to 800 now, but not sure if it automatically speeds up when the GPU / CPU hit higher temps. What would be a good RPM for certain temps? Just don't want my computer getting too unnecessary loud. I have 9 SL V2 vans in at the moment. Also which line is better curved or straight to change the RPM? Thanks!
Hi Jesse, welcome to my channel. In general from temperature 30 to 55. I will run 900 to 1k rpm. From 55 to 70 I will run 1k to 1.2k rpm. From 70 to 85 I will run 1.2k to 1.5 k rpm and from 85 to 100 will be at 1.5 to 1.8k rpm.
Hi Kleo, I'm about to start building my PC using an ASUS Z790-Pro MB, with all Lian Li fans and an AIO cooler. My question is about Aura Sync and enabling the Lian Li fans to use Aura sync, rather than L-Connect 3. Is that possible through the L-connect 3 settings? Thanks, Mark.
Hi Mark Howell, welcome to my channel. Yes you can do that, you will still need the Uni control and L-Connect-3 though. Also make sure to connect the 3pin 5V ARGB cable between the Uni controller to your motherboard ARGB header. Once you did these, in l-connect you have to set sync to motherboard under Quick/Sync lighting menu and enable sync to motherboard.
That is exactly what I need to know. In my case, I will have 2 controllers, 1 for a 3 pack of fans, and 1 for the AIO, so as long as both of those are connected to an ARGB header, I should be good? Thank you for the quick reply, I appreciate it.@@KleoYan
can someone please help me with this i have everything plugged in to the psu the sata cables and downloaded l connect software and the fans turn on and spin but they dont light up and im not sure why
Hi OneBustedPimple, welcome to my channel, I like to ask if you did see the lian li controllers listed in your windows os, under device managment? and when you launch L-Connect 3 app, does it reflect all the temperature stats?
Hello Box, welcome to my channel, best to optimise a pc is not to have argb, get performance case fans and cooler.. without any background running apps you will optimize more system performance. Which this is the truth. Once you start to use any software that uses background process. your FPS will slightly drop.
Hey, have you any idea how to resolve an issue with the Lian Li L-connect 3 software that is causing a "gradual" freeze on my entire PC? It's like a lock-up but nothing is responsive. I can't open things or do other things that requires write/read. So if my browser already loaded up a page, I can scroll and continue browsing, but I can no longer see anything new like clicking on a link or part of the page that wasn't loaded will not be loaded. Task manager and other monitoring programs would cease to function and display only the last known result before the freeze. My system clock would also freeze at the time it starts. I've uninstalled the software and haven't had the freeze now. I've troubleshoot this all the way down to the list and narrowed it to either the mobo faulting or something else like software. I came to the conclusion that it was the L-connect 3 that is causing it occur randomly. The software works, I'm able to see accurate reading of the temps and rpms of the fans. I'm able to adjust the RGB of my fans and strimer v2. However if I have that program up, it will eventually gradually freeze my PC. Sometimes it will happen as soon as I finish booting up, when its automatically started up. Sometimes it would go on without it occurring for 10+ hours, or a day or two. It's totally random. All I know is after I've uninstalled the software, its been smooth sailing. I'm using just two Lian Li controllers, the one for the SL v2 fans, 9x and one strimer v2 mobo cable. Mobo is an Asrock X670E Steel Legend, and cpu is a ryzen 7800x3d. My software installation was on the primary OS ssd, which is connected directly to the CPU, not sure if that could cause an issue. Thanks for the help if you could provide. I've looked all over google and so far I've been people describe the same situations but they all have different specs. None of which had proper solutions. My PC was just built almost a month ago just for more info.
Hi ElementXCR, welcome to my channel, after reading what you've gone through and all the troubleshooting steps which you've provided.I like to check a few things if you don't mind. 1) What's the version bios of your X670E Steel Legend? 2) What are the USB devices connected to your system? I do have emails from viewers they are having issues. I told them to update the bios first and follow by reducing excessive USB devices which are connected to their system. you might want to try narrow down this. if it still does not help, I would adivse you to reach out to Lian Li tech support. lian-li.com/faq/
nevermind... the PC froze again after reinstalling L connect 3 then closing the program. I used the bypass cable so the mobos can directly do the fans and RGB without the need for L-connect. And it froze randomly still. I guess there's a much more underlying problem on my PC... Ahh well, thanks for the reply and assistance.
@@ElemXCR you are most welcome. My guess is leakage of current. If you use too many usb devices. That’s the cause of it, as what I have experienced so far
thank you so much, one question please, i connected the strimer controller to an usb3 to usb2 adapter and the adapter is connected to my usb3 on the motherboard, and i can't see the controller under l-connect 3... it's because of the usb3 to usb2 adapter?
Hello my stuff, welcome to my channel, I have a few question have you tried to plug your strimer plus controller directly to the USB 2.0 header of your motherboard? and btw which adaptor are you using? it could be insufficient power on the adaptor.
i have a question about Lian li Galahad AIO LCD infinity. the L connect 3 is only allowing me to set rgb loop number to 50 max. and my 3rd fan in aio only lights 1/3 of the side rgb pannels. Do you know how to fix it?
Hi Axie 101, welcome to my channel. Just to check. Are you able to control the ARGB effects and to control the lcd? As for the Inf 120 fans where do you plug it?
@@axie1019 I see, reason I asked is. For the SL-INF version of the GA II LCD. It comes with the Uni controller. Therefore you need to have two usb cable plug to the motherboard usb 2.0 header. I would advise you to go back to the person who build your pc to troubleshoot for you. Or check on L-Connect 3 app. Under settings and devices. Are the fans connected to the controller all highlighted or?
Hello everyone. I have a Lian Li build case and i added lately a new hydro Lian Li Galahad II. My problem is that i spent a lot of time customizing the rgb strimers + hydro and when i turn on the PC and the L Connect 3 software runs on startup it resets to the default all the rgb settings. Then i have to customize again and again. If i turn off the L connect 3 program and never run the software again it runs smoothly. What should i do guys; Thanks 😊
Hi akis mpitsou, welcome to my channel. I like to check with you, can you launch your L-Connect 3 app, click on Settings and check if Auto-Run on boot and Minizmize L-Connect 3 to system tray at close are enabled. Also when you've done up your profile. you will be able to save your profile by exporting it to a physical file, just go to the dashboard (exmaple effects for your fans or strimer plus), on the top right you should have export and import.. use the export to save your settings and if in the event, it's mess up during operation, you can always import back your settings.
Hello friend, thanks for your message😊. My settings are both enabled as you mentioned with L Connect. I tried a few times to export my favorite RGB custom settings and import when things messed up but it never restored my favs. It always works on default settings. Its like auto syncing everytime. I have customized each strimer one by one with meteor and when the exe runs it restores everything to the defaults. If i use general lighting effects theres no problem. Only with solo strimers customization..
Hi DpHo888, welcome to my channel. nope you dont have to connect the argb or pwm connector between the hub and motherboard headers. Unless you intend to make use of motherboard utlity to control the fan's pwm and argb effects.
I own the GALAHAD II LCD 360 SL-INF and the Problem I have is that the Software always is Pretty slow and when I change my RGB Settings it only changes after I restart the PC so not in Real time. Current firmware 1.4 is installed. Anyone else faced this issue?
I have “3” 3 pack infinity fans so 9 total. I use only one hub instead of 3 hubs. Would that be why l connect isn’t recognizing my fans ? I have the strimmer v2 on its on hub as well but nothing pops up in the l connect 3. Everything does light up and work but not recognizing in the software. I’m running gigabyte x570 master
Hi TheLop3z, welcome to my channel, did your OS detact the uni controller? that will be the first part. maybe go through these steps and kindly do not miss any of the steps. 1) Make sure your motherboard bios is up to date, please check on your motherboard manufacture website, under support > bios and drivers. See if there are issues with USB and do they have a fix. If there are, kindly update those bios firmware version. 2) Make sure your chipset driver for your motherboard is up to date! For AMD will be at www.amd.com/en/support for Intel will be Intel Driver & Support Assistant Intel DSA www.intel.com/content/www/us/en/support/detect.html 3) Remove all argb apps as for your case is Gigabyte fushion, use Revo uninstaller ( www.revouninstaller.com/ ). Revo uninstaller will remove all unwanted files / folder / registry in your system. Illustration to use revo uninstaller ruclips.net/video/uMgUYiakpxM/видео.html 4) Shutdown your PC, unplug the PSU cable from your AC outlet. Press the power switch twice to discharge all current that your motherboard is holding. Leave it for 45 second 5) While waiting, disconnect all devices that are connected to your motherboard (front / back IO). Leave only your Keyboard, Mouse , Monitor and Ethernet (If you have) connected directly to your motherboard. If your monitor has a KVM build-in, remove the USB cable from your monitor to your motherboard USB socket. If your mouse and keyboard are connected to your monitor, please remove them and plug them directly to your motherboard instead. 6) Plug only one Uni controller or Strimer Plus V2 controller. If its for Uni Fan (SL/AL) use only 3 fans to an output of the uni controller. 7) Plug the power cable and turn on your PC 8) Go to your Device Manager, look under Universal Serial Bus Devices, make sure you see the Lian Li uni / strimer plus V2 controller. 9) Install the L-Connect 3 app only lian-li.com/l-connect3/ (current version 1.3.16) 10) After installation, run L-Connect 3, check under Setting > General > make sure Auto-Run on Boot and Minimized L-Connect 3 to system tray at close are ON. 11) Reboot your system. 12) First thing you need, go to device manager and see if the Lian Li controller is listed, next open up the L-Connect 3 app. Check if there is a need to update firmware to your controller. Go to Settings > Update, under Device F/W version, click on Update Check, download and install the firmware. Make sure the firmware is completed. Do a check on device manager and make sure the Lian Li controller is listed. 13) On L-Connect 3 dashboard, check if the CPU and GPU readings are reacting, you might want to test it using some benchmark programs. If there are reaction, play with the PWM and argb functions. If it does not work, skip step 14) and proceed step 16) 14) If Single controller works, shutdown your pc, connect uni fan set of 3 to your output of your uni controller. Do it small steps at a time to hook up your sets of fans. do not do all in one go. If successful and you have a second controller, proceed small step at a time again. 15) Slowly plug back your USB devices (Headset, Microphone, Printer, USB Capture Card and etc). At any point of time as you add those devices one at a time, if L-Connect 3 become unresponsive. This tells you that there power is insufficient to power up more USB Devices. Whatever USB port on your motherboard, there is a limitation as the current are shared across the board, be it front or back I/O and the internal USB Header. You might need to get a Internal USB Hub that comes with a Sata Power source to the Internal USB Hub. (Disclaimer, buying a internal usb hub might or might not resolve this issue, purchase at your own expenses) 16) If it does not work, report your issues to Lian li Tech Support. There is a in build log ticketing system in L-Connect 3 app. this is what you need to do. Go to Settings > Support > Click on “Download log” place a filename and choose a destination drive to save the log file. Next click on “Report” it will take you to Lian Li Tech Support FAQ. Fill up the form and upload the log which is a zip file.
![Lian Li - SL Infinity [L-Connect 3]](/img/1.gif)
This was super helpful! Just swapped out my Corsair LL120 fans for Uni SL120 Infinity fans yesterday. Night & day difference in quality! And the amount of wiring is about a fourth of what it was. Very happy about that! But this video gave me some tips that I didn't think about or was unsure about, so thank you!
Hi TravD23, welcome to my channel and am glad you like the content of this video. I have a series of these Lian Li argb stuff which might interest you ruclips.net/p/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm once again thank you for the visit and all the best with your PC build 👍
Is it worth to change ? i have LL120 and been considering to change to the SL120 infinity for a while
@@NoOne-qc5fn Definitely worth it for me. As stated above, it cut my wiring down to only a handful of cables. They also perform well (temps have been solid) and look amazing. So for me, it is absolutely worth the change.
@NoOne-qc5fn not as easy at it seems. It's a pain the ass and wish I didn't undo all my good cable managing I had with my QLs I plugged everything up and the l connect 3 doesn't even detect my fans
Thanks man, thats great info, i was struggling to understand the idea of those fans
Hi Noor Aloush, welcome to my channel and I am glad this content did aid you. All the very best with your build too. 😊
Thank You! It helped me to recognize strimmer plus v2 in the L-Connect3. Many Thanks to You!
Hi Guga Kakhadze, welcome to my channel. I am glad you have your strimer plus V2 sorted.😉
2024 and this solved a huge headache for me trying to mix SL v2 and SL infinity fans. Thanks
Hi forcedcobra, welcome to my channel. I would say yes it's a big headache but I believe Lian Li is going to come out with a controller that will enable you to plug all the different type of uni fans to a controller. Will have to wait for them to implement it.
Another excellent video, I do have an issue with L-connect 3. I've tried different methods but failed. Your tip on even power distribution have solved the problem. Thank you Kleo, you are awesome as usual.
Hi Nox Mu, welcome back, I am gald you have fixed your issue and thank you for the compliment.
great video. I was having problems but followed your directions and it's all working perfectly now. thank you for making this.
Hello roozster, welcome to my channel and am glad this aid you out. Have fun now 🙂
PERFECT! love the new L-Connect 3 app , wish it worked for the damn Kraken water cooler . Tkx
Hi Crypto Johnny, welcome to my channel. Yes it will be perfect if you only use Lian Li's argb ego system. If you add on other argb devices, thats where things starts to get complicated.
Thanks for putting in the work of troubleshooting, updating, and configuring these devices. The video is a huge help.
Hi Mannie, welcome to my channel and thank you too for leaving your valuable feedback. All the best with your build too 😉
Power supply is probably only relevant to those people using lots of controllers and fans. BUT the suggestions regarding the USB hub is genius. Most of us have far too many USB devices, connected externally, but we don't know which internal USB line they are running from, and if it has enough power.
Hi Julie Fisher, welcome back. Yup, I have tried using usb splitters which does not have sufficient power and due to the fact that most PC users uses too many usb devices. This will cause intermittence or even unable to recognise the device. That’s why I choose to use an internal usb hub which is powered by the psu sata directly. Btw am using the NXZT internal hub.
Very informative instructional video Kleo. I own 6 Lian Li UNI Fan AL120 , 3 Lian Li UNI Fan SL-INF 120 RGB Infinity Mirror Fans , 2 LIAN LI Strimer Plus V2 ,and the Lian Li Galahad AIO 360 RGB UNI Fan SL120 with 3 Lian-Li controllers in my ROG MAXIMUS Z690 HERO and now I understand how to connect every component together with the NZXT Internal USB Hub 3. The only problem is I own Corsair Dominator platinum RGB ddr5 ram that doesn't sync with the L-connect 3 software so I use the Asus motheroard plug to bypass L-connect 3 and every component syns with Asus Amory Crate. Thanks for a great channel !!!
Hi Jim Hamilton, welcome back, yup there are still other argb stuff which I am not able to resolve as I have tried writing in to Corsair and NZXT for sponsorship. But none replied, that’s why this vid title is meant for all pc builders using lian li products. Nevertheless thank you for your support👍
Important, helpful and quite valuable instructions ! Yet another generous share of knowledge and experience. Great job !!!
Hi Mr Voayer, welcome back and thank you for your valuable feedback, greatly appreciated it. 👍
Was very nice working with you Yan ! Thank you :)
Hi Gokhan Sevindi, welcome to my channel and thank you for your valuable feedback. All the best with your build too. 😉
I've just installed 9 Infinity fans to a new build. On boot 3 connected fans are running full blast which i cant slow down. I have tried everything i can think of, from software to physical connections, but cant slow these 3 fans down. If anyone has any ideas then id be very grateful. This video is so informative for someone inexperienced like me. It feels good to watch a video and learn something for a change. Well done sir.
Hi weaselinjeans, welcome to my channel. If you just plug everything in and can't get it to work. try the steps I have shown you in this video. do one thing at a time. first thing is to get your L-Connect 3 to be able to response with the CPU and GPU temperature. run the benchmark. you see, if you do it step by step, this ensure on the connection and the communication between your motherboard to the controller. Alot which I have aidded, all told me did my steps but when I find out.. it's not exactly the steps they follow. Ended up I have resolve their issues via conference call. telling them exactly what to do. my method as in step by step is to first, ensure the controller is communicating with your motherboard first. then next will be the update firmare. Anyway I hope you will resolve your issue soon. thank you for the visit and to have leave your valuable comments.
@@KleoYan thank you very much once again. When I get home this evening I will work through your tutorial, step by step, and let you know how I get on. Thanks again for the rapid response to my question. Keep up the great work 😊
@@weaselinjeans1 you are most welcome and all the very best.
That video helped a lot or brought me to the solution based on issues i had with L-Connect 3....
So, i'm running an Asus Dark Hero VIII (X570), 5900x in an O11 XL Case.
When i built the pc, i was running Lian-LI SL Unifans (infinity were not released back then).
Controlling the Fans through L-Connect worked fine for L-Connect 1/2...
However, even after upgrading the FW of the Controller, L-Connect 3 was never working... while L-Connect 1/2 didn't cause issues.
I upgraded some parts 2 days ago, replaced the Galahad with a Kraken z73 and the SL Unifans with the newer Infinity ones (which also come with a newer controller).
However, L-Connect 3 still didn't seem to work - but to controll all the lightning options of the infinity fans you need L-Connect 3.
Was driving me mad after x amount of reboots, bios update to the newest versions, disconnecting the pwm and only running per USB etc.
My Windows Installation has some legacy, so i reset/fresh installed win11 to be sure no ghost driver stuff or whatever causes issues,
nothing really worked though...
In the End it was all about USB Power... I have a 4k Aorus Monitor which has a built in KVM connected via USB....
Seems this have drawn a loooot of power from the mainboard and was causing the un-resposivness of L-Connect 3...
As soon as i disconnected USB devices 1 by 1 and all of a sudden l-connect 3 started to work, I found out what devices have been causing the issue...
So again, thanks a lot for the hint in terms of usb power distribution and to look into that, which lead me to the solution :-)
I still find it funny, that i never had issues with l-connect 1/2 though compared to l-connect 3....
That's kinda strange that the issues were not present on prior versions... I can only imagine, that l-connect 3 draws a lot more power from the controller due to all the built in monitoring measurements l-connect 3 is doing from the controller which draws more power? At least this seems the case...
Hello Tino Burkhalter, welcome to my channel. yes one of the issue is with KVM switch or the build in KVM on a monitor.. I had your issues back then and did talk about it. However there are still issues for some peeps as they did not do the primary test or check. I know L-Connect 3 is fussy but once you narrow down the issue. it will work swiftly.I am gald you have solve your issue. once again thank you for your visit and your valuable feedback. 😉
So dumb to need so many controllers to do some led lighting. It's like mixing 20th and 21st century tech. Should be 1 controller, and 1 software to control everything. Esp for the price.
Hi Nick G, welcome to my channel and thank you for your feedback, just a suggestion, you might want to write in to Lian Li to suggest it.
I won’t lie, I definitely agree to this. Should be much, much more simple this day and age.
@@micspamgod2324 welcome to my channel. Thank you for your feedback, I have sent this feedback to Lian Li and it will be great if you can highlight this at Lian Li's Reddit forum. www.reddit.com/r/lianli/
I am really irritated that I have spent soo much money and it took us hours searching on web how to connect, AIO and fans. And then you find out you need hub. Which is not shown on any manual.
Your videos have been very helpful and greatly appreciated! I have just built a system using several Lian Li products, and initially I couldn't get the SL V2 controller to show up in my device manager, and following your instructions I was able to get it to work perfectly. I also have a Strimer V2 cable, and that has worked great from the start with L-Connect 3. My last issue, is that I have purchased the Lian Li Lancool 216 RGB version case. I have 6 SL V2 Uni fans - 3 of which are on a Lian Li Galahad 360 AIO. I hooked up the PWM header from the SL UNI fan controller to my CPU_FAN header. I'm not sure if this is optimal, but everything seems to be working fine, and I can control all 6 of the UNI fans with L-Connect 3 (both PWM and RGB). The issue I have now remaining, is the two 160 mm RGB case fans that came with the 216 case. I opted for the AGRB controller accessory, which is just another USB 3.0 port hub, and has some mode and color buttons to control the RGB on these fans. I thought this would be fine, but I've found every time i power off and on the PC, these fans revert back to rainbow RGB - which is really annoying. The case came with a fan controller for the case fans, but to my surprise (and dismay) Lian Li didn't integrate this hub for use with L-Connect 3. What is up with that?? My goal would be to have all the fans and RGB controlled by the L-Connect software. The PWM control of the case fans is working fine using the ASUS armoury crate fan xpert software, so I'm fine with that. But is there a way to get the RGB of the two front case fans to sync with the rest of the RGB fans using L-Connect 3? I asked the question to Lian Li tech support, and they didn't give me any instructions but sent a link to a ARGB cable kit. The only thing I can think of is to use an adapter from the 5 V ARGB connector from the case hub to connect to the sync port on the UNI SLV2 controller. I just am not sure if this is what they meant. I did use the RGB cable from the Galahad AIO RGB to one of the sync ports and that does seem to work with L-conect 3. What do you think?
Hello Kinegos, welcome to my channel, I will get back to you on this as it's pretty late at my end, need to catch some sleep, but will reply you in my morning. Thank you!
Hi Kinegos, what your have mentioned about the Lancool 216 case fans. You are absolutely correct. Here is a diagram which will aid you imgur.com/PrPqFBt (download the picture if it's too small), btw, the converter is part of the lian li argb kit which you have bought.
@@KleoYan Hey Kleo! I wanted to follow up as I finally got the Lian Li ARGB Device Cable Kit which had the adapter cable I needed as in the picture you kindly linked in your comment. I'm happy to say it is working great now with the only small annoyance that every time I reboot I have to press the mode button on the 216 accessory RGB interface for 3 seconds to hand control over to the L-Connect app. It's still better than what I had before, but Lian Li really is puzzling that they make this new case with RGB controls but don't integrate it seemlessly into their own RGB software right out of the box. But really appreciate your help! Now I have about 10 cables I don't need as I just used the one cable out of this kit. 😂
@@Kinegos Hi, welcome back and am gald you got everything sorted out. That's one of the down side not only in Lian Li 216 argb controller. it happens to most physical controller which has a remote control. If it's software based, then you won't have this issue. This physical controller on the case do not remember the Mobo settles, you have to toggle it.
Holy heaven do you know you Just solved every single problem I had in mind ?? ❤❤❤
Hi TPW, welcome to my channel and you are most welcome.. I am just like you a PC builder and wanting answers with the help from Lian Li Tech Support that is.. advantage is. I can speak mandarin so it's easier for me to communicate with them :P, in return I did up a series and aid others as much as I can. Not all successful but at least a handful. Once again thank you to have visit and to leave your feedback, all the best with your build too. 😉
Btw, this is the playlist ruclips.net/p/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm incase you are curious.
@@KleoYan much obliged
@@KleoYan oh that’s awesome actually maybe I can use your help in the future
@@TheTPW Hi ya. sure, if only I can help, no promises, if you can't get me here you can send me an email godzylatech@gmail.com
I only see a TAB for SL-Inf, but not TL-LCD. I do have the controller all plugged in. It detects it in other areas of the software. I can change what is display on the screen and change the fan settings, just not under Fan / Pump Profile.
Hi TimboSlice083, welcome to my channel. did the TL-LCD pops up on your device manager?
Chipset update helped, thank you
Hello SweetDralinHoneyLove, welcome to my channel. That's good to hear and thank you for your feedback.
Thanks this fixed my problems🙌🏽
Hi Eren Yeager, welcome to my channel and I am glad this content does aid you in some ways. 😉
Been driving me nuts trying to figure out ways to connect my V1 to my mobo turns out it’s just cuz I have the manual V1 guess I’ll go ahead and get the V2 box thank you !
Hi Vulcan Krpyto Gaming, welcome to my channel. I am glad this content did aid you. All the best with your build. 😉
This video it a lot of help, thank you so much. 😁
Hi Bill Felix, welcome to my channel, I am glad this content did aid you. You are most welcome. Thank you for your feedback and all the best with your build too. 😉
Great video. All of your videos have explained the entire Lian Li fan ecosystem. As a recommendation, it would be nice to see how to integrate it with the Lian Li Lancool iii. For example, how to tie in the front ARGB fans, motherboard integration, etc.
Hello Iron Condor Simulation, welcome back, let me see what I can do about your request later as currently am waiting for Arctic's 420 liquid freezer to reach me. once again thank you for your suggestion and to have visit my channel.
did yall figure out if the front 3 argb's on the lancool iii are controllable by Lconnect?
@@mariopro519 hello and welcome to my channel. The lancool III fans have the similar argb 3pin Jst03 plug where you can plug to any argb port or fans in a SL or AL controller. But for the SL infinity controller. You can only plug the argb to sync 2 or sync 4 port. The fans you need to plug directly to the motherboard fan header.
awesome video. we need a video on MB sync. example: connect L3 with aura Sync , rgb Fusion ect ect . thanks in advance.
Hello MR. PHILLIPS, welcome to my channel, thanks for the compliment and I will see what I can do with your request. thank you!
@@KleoYan Thank you in Advance.
Thanks for mentioning the different controllers. Me trying to plug an SL-INF reverse fan into a controller didn't work for me. Looks like my best bet is it is the wrong controller.
Lian Li has great products. Terrible in showing how to connect fans, and what is required.
Hi Scott Quayle, welcome to my channel and I am glad this content did aid you. Thank you for your feedback and all the best with your build too 😉
OK had to stop in and hopefully help others with Lconnect 3 being unresponsive. For me i had to unhook my monitor USB cable to computer. The Gigabyte FI32U has a hub with soundcard, i had the sound card disabled thinking that would help, nope.
I tried different versions of Lconnect and none would be responsive, always click on something then about 30 sec to minute later it would change. Now its working great.
Also i fixed Snowrunner being unresponsive when alt-tabbing out or clicking out of snowrunners window.
Win 11 22h2 all updated and also newest drivers for everything. 13900k, 4090, 32gb gskill 7200, 5 m.2 ssds, 1 sata ssd.... :)
Hello i traumatik, welcome to my channel and thank you for the insight of your experience. I believe this will help others out.
Very useful. Thanks for putting together this video
Hello Solaris, welcome to my channel and thank you for the compliment.
Thank you very much for your video. I bought the denier lian li galahad ii 360 trinity sl-inf. I am in Full Corsair. But I wanted to change brand.
So I took out my Corsair AIO and put in a Lian li AIO. But I've kept my Corsair QL series for the time being. So I have L connect and ICUE at the same time. No problem for the moment.
I'm waiting for my Uny fan revers :)
I was wondering why my Lian li peripherals were appearing in my taskbar. But when I saw your video, apparently everything's fine because you've got it too. With Corsair nothing appeared. I also use the NZXT.
On the other hand, I don't know why I get a little loading in the background every 5 minutes. If I cut L connect I don't get it anymore.
Hi Protect_Dreams, welcome to my channel, thank you for your valuable feedback. Now as for your background process, this I am not able to answer you but I do know that all argb programs make use of one common shared IRQ, which ended up applications might just grabbing for permission grant, this could be one of the cause.
Super helpful. Thanks for this.
Hello Doc Brody, welcome to my channel. Thank you for your valuable feedback and all the best with your build.😉
Thanks this video sorted thing out for me straight away
Hello eliteaky, welcome to my channel and am glad this content did aid you. All the best with your build.
been searching forever for someone to explain how! finally someone explains in details, one question though, can i connect lian li galahad aio to the unifan controller?
hello blaydemastah, welcome to my channel, the argb connector of the Galahad pump, you can connect it to the uni fan controller but for the pump connector, kindly connect it directly to your motherboard fan/pump header.
@@KleoYan ah thank you! Also one more question, can I connect the strimer v2 controller to the unifans controller? Or will I have to connect the strimmer controller to the motherboard?
@@0verdead for the Strimer Plus V2 controller, you can only connect it to the motherboard usb 2.0 header. you can't mount to the uni fan controller.
Thanks for sharing. 👍👍
Hi John Fraser, welcome to my channel. Glad to be of help. All the best with your build.
@@KleoYan thank you ~ yes, I am just beginning a new white-theme build in a Lian Li case and with Lian Li infinity fans and Strimer. Your video has given me good ideas for how to properly connect those parts. Also a good tutorial on the L-connect 3 software. 👍👍
@@johnfraser6013 I see. Have fun and all the very best with your build too 😉
hello, thanks for your tutorial. do you know why the yellow and green digits don't show on my unigine heaven benchmark test run?
HEllo Shane Tan, welcome to my channel. those are OSD which you will need HWinfo64 and Riva Tuner to show those stats..
I was having issues with getting Lconnect to see the fans. Turns out my NZXT mobo came with a USB splitter, and that was causing problems. Fans still worked at full speed, but no control until I got rid of that splitter.
Hi Qix, welcome to my channel and thank you for sharing your experience with us, greatly appreciated it. Are your uni fans working properly now?
Could you make a video on how to install these fans on an AIO of some other brand?
Hi Kid A, welcome to my channel, I am unsure what you are looking for. plus I do not have all the aios and such. if you are referring to Corsair and NXZT. do pardon me, I have tried asking but they have not reply on my request. the only stuff I have are here. imgur.com/gallery/zEKCkRf or imgur.com/gallery/wxrKnQd
The effects on the strimer L-connect is different than the one with buttons. I like the effects on the older strimer. But it is not available on the newer one and hopefully software update will fix that.
Hi Mark A, thank you for your feedback. I will write to Lian Li and see what they can do about this.
Only problem I’m having is the high CPU usage due to the L-Connect. Also is it normal for the fan to be shown as a removable device in the taskbar tray?
Hello Hanies, welcome to my channel. High useage of CPU can be caused by alot of resources sharing the same IRQ as the usb devices you have used or it could be other causes like background apps that make use shared program code that interfer with your L-Connect app. I am not able to tell you which, you will need to figure out yourself. for a start if you have alot USB connecting device, remove them all and slowly plug one at a time so see if it does take up the system resource which is shared with your L-Connect 3 app. (Excluding Keyboard and Mouse)
@@KleoYan Thanks for the reply, I’ll have to try that. I had to use a USB hub as I have the Corsair LCD pump and Commander Core inside the case too.
@@haies09 ok that might be the issue. you have two devices that runs argb program at the background, both are fighting for rigths as both make use of the same IRQ, therefore the conflict might start from there. so something which you will need to take note on... all the best with your troubleshooting.
Could you do a video or answer if you can connect additional rgb products to the Lian Li controllers? If someone has a non-lian li aio with 2 or 3 rgb fans (which means up to 4 possible rgb cables because older systems don't daisy chain), for instance, can you make Lian Li L-connect control them? What is the capacity, if able, of Lian Li controllers to control other rgb products? Thanks for this immensely helpful video. Every other video I looked for only talked about individual products and didn't really touch on combining multiple products.
Hi Christopher Chapman, welcome to my channel. As for non lian li argb products, you can plug but with a limitation. 1st the argb effects might not react the way you want it. 2nd you will need a coverter for it. same applies to argb strips you need the converter. I have a playlist of these lian li argb products which you might want to watch. ruclips.net/p/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm kindly note of the Dos and Donts video.
Great video, would have saved me some time when I started with the Lian-Li fans and software. Is there a way to control the RGB effects so they continue from one set of fans to another on the entire controller? I only manage to change it within one "bank" of 4 fans.
Hi Mikael Bäckström, welcome to my channel. For this you will be able to control the pattern within the Lian Li argb products as they are cater for only the uni fans and strimer plus in
L-Connect 3 (Quick Sync Lighting). If you are talking about having your rams and GPU, that's not possible. Once again thank you for your compliment and feedback.
Hey i really enjoyed the detailed explanation, I just finished my new build and have installed 9 Tl fans on my pc, 3 lcd on the side 3 tl led at the bottom and 3 tl led at the top, so i replaced the standard fans that came with the lian li galahad lcd aio with 3 tl fans instead and connected them into the controller, so i am using 3 ports, however the three top fans are not lighting up or showing as connected in the software but they are spinning and working, on the l3 connect software it shows port 2 and 3 fans which are the ones at the bottom and the lcd fans on the side and it also shows the aio too. i been trying to find out why this is and i have checked everywhere but im not sure why this is the case, any information or help would be appreciated so much 🙏🏻
Hi adz_khr, welcome to my channel. I would advise you to do this.
- Uninstall L-Connect 3 app, using revo uninstaller, ( www.revouninstaller.com/ ). Revo uninstaller will remove all unwanted files / folder / registry in your system. Illustration to use revo uninstaller ruclips.net/video/uMgUYiakpxM/видео.html
- Next turn off your pc and do the connection as listed below.
a) Connect your daisy chained 3 x TL LED fans (Radiator Top) to port 1
b) Connect your daisy chained 3 x TL LCD fans (Side) to port 2 (TL LCD fans will only work from port 2 to port 4, it does not work with port 1)
c) Connect your daisy chained 3 x TL LED fans (bottom) to port 3
Once you have done the connection above. Boot up your pc, check on device manager to see if you are able to see the TL Controller listed under Universal Serial Bus Devices. Next install L-Connect 3 app, check for firmware updates. Test your fans and TL LCD again.
When is Lian Li going to release a multi pack version with controllers of thr SLINF140 fans in the US, the product has been released for 3 months now, but doesn’t seem to be showing up on any websites, AliExpress, or even ebay.
Hello Marc West, welcome to my channel. I believe is due to shipment delays as due to holidays over at China and Taiwan (Lunar New Year).
Hey thanks for the video!
at 4:50 I connected the hub to all the connectors, the 5v and the argb on the ProArt motherboard, they work and I can control the fan speed through bios, but, the RGB lightening is not working, any idea why?
Hi Shepard, welcome to my channel, mind if I ask which uni fans are you using?
@@KleoYan Hey Kleo, thanks for your reply I just subbed your channel.
I use the UNI fan SL-INF120 the latest. with the latest hub and everything.
@@Shepard7 I see, if you look at your uni controller. There are total of 6 port, which 4 of them are labeled as 1 to 4 (7pin socket) and 2 are labeled as sync 2 and sync 4 (3pin socket). As I have mentioned to you, for your radiator fans, use the SL Inf 120 individual pack where the cable is split to 4pin (pwm) and 3pin (argb). Connect the 4pin to your motherboard fan header (CPU_FAN) then the 3pin to the uni controller Sync 2 or 4. This way, you control the PWM using the motherboard instead of the uni controller and control the argb using the L-Connect 3. and to control the argb in L-Connect 3. You will need to have fans connected to port 2 which sync 2 will response to / port 4 which sync 4 will response to.
For the rest of your SL Inf 120 (case fans), use the 7pin cable to connect from the fans to the uni controller. So both PWM and ARGB is controlled by the uni controller using L-Connect 3.
As why doing this. In the event if the uni contoller malfunction. The radiator fans will only affect the argb effects but not stopping the fans from spinning accordingly to your motherboard pwm settings. This is just a safety measure.
@@KleoYan Thanks a lot, but I didn't get the cables for single fans, I bought the 3 fans set, and I use it for 2 top and 1 rear.
So I'm limited here, no USB available slot, that's why I do it.
Someone mentioned I can control the ARGB without L-Connect3 software, is that true?
@@Shepard7 Hi I am so sorry, the way I reply you is meants for another viewer. I got confuse with replying comments.. so sorry. ok for your case. if you got the 3 pack set. you have no choice but to make use of the uni controller which require the USB connection to your motherboard. if you are limited to USB 2.0 Header on your motherboard, you might want to get a Internal USB hub that is with the sata power connector, like the NXZT Internal USB hub. nzxt.com/product/internal-usb-hub-gen-3
the second question you asked. yes it is possible without using L-Connect but you will only be able to do this if you buy the individual pack as the cable is not in 7pin but in 3 and 4pin, 3pin argb and 4pin pwm, where you can plug directly to the motherboard Fan and argb header. then use the motherboard utlity to control the argb effects and the fan load (PWM). but make sure you check the load limit of the argb, do not daisy chained more that 4 fans and plug to the motherboard argb header.
My firmware won’t update on my SL120 fans I have v1.2 but it says v1.8 is available but says “unsuccessful”, then the device disappears and pops back up
Hi craigchrist360, welcome to my channel. Try update firmware manually lian-li.com/l-connect3/L3_update_manually/
Both my ARGB header on my motherboard doesn't work (I believe they are gone for good) But with this product i don't have to toss my my ARGB fans, correct? Since this allows me to bypass "Motherboard" for ARGB Fans
Hi AP's Journey, welcome to my channel. the argb cable which is between the Lian Li controller / hub to your motherboard ARGB header is optional. you can don't use motherboard argb utlity at all, just remove that cable and make use of L-Connect 3 app to controller the argb effects which the command is from your motherboard USB header to your Lian Li controller / hub. then to your uni fans.
It all becomes a cabling nightmare, the back of my 011 D mini looks like a bomb has gone off 😆😬 wish all cables were super pliable and not ridged.
Hi Helghast73, welcome to my channel and Merry Christmas. It is indeed a nightmare but it can be tidy up, just need some time and patience 😉
@@KleoYan Merry Christmas to you too 👊
Everywhere is out of stock of the triple pack, can I just buy 3 fans and the right controller?
Hi enduro_mtb, welcome to my channel. You can do that but subject to availability, just make sure to get the correct controller for your Uni Fans.
Hi man I had a question about the sl120 v2 fans. I’m planning on not using lian Li controllers but razer chroma controller so I can control 10 of these fans from my motherboard and other software. If I daisy chained 3 fans by sliding them together x3 (3 at top, 3 at bottom and 3 at side then one fan at the rear), can I plug the 4 ARGB headers into one razer chroma controller and then the PWM cables to the motherboard sys fan header (cpu fan header for the fans on a radiator)?
Also, if I daisy chain 3 at a time by sliding them together will I be able to control each fans RGB individually through my motherboard or will my mobo only see the 3 daisy chained fans as one group(e.g. can I make one fan red, one blue, one green or can I only make all three one colour if they’re daisy chained).
Hi Power, welcome to my channel. I am only able to answer what I know. If you purchase the SL120 V2 fans as single pack. you can plus the fan's argb to the motherboard (covertor included) and the fan load to your motherboard fan header. AS for the Chroma controller, I have no experience on that but if it takes in normal argb 3pin 5volt standard argb connectors, then it should not be an issue. The only thing you need to take note is the load capacity. please check the specs of the Chroma controller, see how much ampere it can cater for and to check the SL120 V2 ampere too. As for the effects you are asking, this greatly depends on how Chroma design the argb effects and same applies your motherboard argb utility.
what's the reason that the SL infinity RGB is not turning on at all but the fans working fine, did all troubleshooting SL infinity controller shows in both device manager/L connect software and its firmware/chipset/bios all up to date. even ordered 3 new fans connected them with new sl infinity controller and wires fans worked but rgb still does not work? also when i connect the sl infinity controller both the old or brand new one to sata power in psu only the sl infinity controller nothing else, it doesn't let pc to boot or turn on shows a red light but when you connect sl infinity controller to cpu/pcie in psu pc boots normally fans work but rgb doesnt work? when i connect sl infinity controller and fans both my old one and new one in my other pc it works flawlessly both rgb and fans. dont know why it has issues with my main pc did everything cleared cmos bios flashed latest bios uninstalled all rgb apps with revo uninstaller but rgb still dont work only fans motherboard is msi z790 motherboard and cpu is core i 9 1200k intel cpu.
i have 3 sl infinity fans with regular cables no sl infinity controller that connects to fan and rgb header on the motherboard those works fine and when i tried and connected that regular cables with my old fans they also worked both rgb/fan so now i think the only way i can fix the rgb for my other 6 fans finding 2 new regular cable that connects straight to motherboard fan/rgb header will fix my issues since even ordering 3 new sl infinity fans and a new sl inifity controller that even didnt work only fans worked rgb didnt turn on.
Hi Adam Otak, welcome to my channel. It seems like a motherboard issue. have you tried changing the USB header of your motherboard or try this
1) Turn off your system, switch off the PSU botton to off
2) switch off main switch which provides power from the AC cable to your PSU.
3) press your power button of your case a couple of times to discharge any current holding on your motherboard
4) leave it for 45 seconds.
5) plug everything back on and turn on your system.
see if the steps above resolves the issue.if not, last resort, get a spare nvme m.2 or 2.5" ssd, install fresh windows OS and try it. if all these still does not help. then I have no clue what's going on but to pin point on your motherboard.
thank you!
Hello BigWaterFrog, welcome to my channel and you are most welcome 😉
Hello Kleo, I recently updated my L-connect 3 together with my SL120 Infinity fans firmware. But ever since the updates everytime my pc restarts or turn on the L-connect doesn't save my rgb settings and it keeps reverting to rainbow effect each start up. Any clue?
Hi Grizworth, welcome to my channel. everytime you update the L-Connect 3 app, it will first remove the necessary settings and bring back to default. Best way to counter this is to export what you have set, so once you lose your profile, you can import it in. There is an import or export button at your SL Inifinity dash board in L-Connect when you set the argb effects lian-li.com/l-connect3/l3-manual_backup/#elementor-toc__heading-anchor-3
i just installed the latest lian LI RGB fan inifinity the problem is the application after boot wont minimize by itself
Hello Dexter Gilapay, welcome back. On L-Connect 3, go to settings where you have the minimise when closing windows. Unchecked that and uncheck auto run. With the l-connect 3 app display still on. Shut down your pc. Boot it up again. Then launch l-connect 3 app. Enable back the two functions and still having the l-connect 3 on, shut down your pc again. Then turn it back on. I did have the same issue like yours and I did that. Give it a try.
My L connect 3 is running painfully slow, I can’t do anything with it and can’t find help anywhere
Hello Simon Austin, welcome to my channel, are you able to check what's the process usage as in percentage of L-Connect 3 app? maybe you want to try remove the app and reinstall the app, use Revo Uninstaller to clear off all the unwanted files and registry before you do a clean install of the L-Connect 3 app.
Noted on not to mix & match. But can I have 120mm TL and 140mm TL connected to a single TL controller? I'm not sure if fan size matters for controller even though they're of the same TL fans. Very informative vid!
Hi Peter Joy, welcome to my channel. So long your daisy chain set is to one port, you will not have an issue. Example Port 1 are all 120mm TL fans and port 2 are all 140mm fans. Not forgetting once you have done that, go to your L-Connect 3 app and set the fan profile for 140mm to it's 140mm profile.
@@KleoYan Brilliant, many thanks!!
@@peterjoy1713 you are most welcome. All the very best with your build too. hmm maybe this might aid you further as a number of my viewers benefit from it. It's not about MX6 thermal paste but more on how I apply paste which to me 98% with good results. ruclips.net/video/xZ2R4roF1_Q/видео.html. the trick is, you do not need thick layer of paste, just a thin layer and sufficient enough for your coldpate to contact the full surface of the IHS.
@@KleoYan Yes! I had been doing the same application method (with painter's tape) on my previous builds. Though I've been doing away with thermal paste as of late and having great success in using PTM7950 instead, surprisingly. I initially experimented with repasting my laptop with good result in bringing temp down. Then I went to my PC and re-pasted my CPU and GPU. It has been about 4 months since application but here's the before -> after results as of today: CPU avg 59.6 C -> 47.5 C. CPU max 75.1 C -> 64.1 C. GPU avg 33.0 C -> 28.0 C GPU max 35.0 C -> 29.0 C. GPU hotspot avg 43.5 C -> 38.8 C GPU hotspot max 46.5 C -> 39.4 C. I'm curious if these results stick over time which I hope so. I will keep monitoring. My new build will likely use PTM7950 as well. Thanks again! I am subscribed and looking forward to seeing your next contents!!
@@peterjoy1713 Oo PTM7950 is excellent for heat absorption. You won’t have to worry as it will last extremely long 👍. Thank you to have subscribed.
Thanks for the video. I have an issue with my Strimer. I recently installed the 24 pin v2 strimer and the 12vhpwr v2 to my lian li inf hub like you showed in one of your videos. My issue is that upon startup my system RGB from lian li inf fans synch with my motherboard as they should but my Strimers dont do that. They stay in default rgb color. They only synch up with motherboard when i startup L Connect 3. Is there a way to solve the issue? Thanks in advance :)
Hi Alexandar16, welcome to my channel. I like to check how did you plug your Strimver Plus V2? does it plug to the Strimer Plus V2 controller?
@@KleoYan i plugged my strimer v2 hub to my lian li inf hub with a splitter. i have 10 fans (3 bottom, 3 side, 1 in the back and 3 up connected with my nzxt z79 aio cooler) all of them connected to the inf hub and now the strimer hub is now connected there too. The only thing i added there too is the NZXT internal usb hub since my motherboard only has two usb 2.0. The AIO and the Lian Li Inf hub is used with the NZXT usb hub. Thank you for your answer. I really appreciate it :)
I have 10 SL-INF fans. 3 top fans for AIO, 3 in front, 3 side and 1 in the back. Now if I connect all of them to 1 controller... do I have plug the controller into SYS_FAN? I understand that top AIO fans will not turn on until I'm booted into Windows. I kind of wish them to turn on when PC is turned on. What are my options?
Hello Ivo Kurzemnieks, welcome to my channel. as what you've mentioned, you can choose to use the L-Connect 3 to control the RPM and argb, you need not have to plug anything to the motherboard fan header, unless you wanted to control the RPM via your motherboard UEFI or it's utility software. as for the boot up, there are no other options, you will have to load to windows inoder to kick start L-Connect 3.
Hi Kleo Yan, I have the old strimmers types (Qty 2) and wonder if I can plug them into a new UNI fan SL-INF 120 controller which has no fans plugged into it, as I want to try and control all my lighting through Connect 3. I already have the Galahad II pump AIO controller in my system but all the ports are full with fans and the pump. Can I use a second controller to run my strimmers? I am stuck with this problem on how to add my strimmers. I hope you can help. or should I purchase the new Lian Li Strimer Plus V2 24-Pin ARGB Motherboard Extension Cable and Lian Li Strimer Plus V2 Triple 8-pin ARGB GPU Extension Cable which come with a controller?
Hi Mal Anderson, welcome to my channel. for your case, you will need a strimer plus V2 controller (www.aliexpress.com/item/1005004239607087.html?) and does your motherboard have another USB 2.0 header? normally a board is equip with 2. if both are used up, you will need a USB Splitter (www.aliexpress.com/item/1005005121350909.html)
Hi Kleo, after several months, I finally got my whole pc from LianLi :D
Everything works perfectly but... Is it normal that the device manager detects LianLi-SL-Infinity-v1.4 and LianLi-GA_II_LCD_v1.3 and allows to "eject" it?
I have 10 SL-Inf connected to the Galahad 2 LCD SL Inf controller.
Thank you!
Hi Varo Go, welcome to my channel. As device able to be ejected, that's normal as any detachable USB devices will have this function in Windows. on my lower right corner of Windows 11, when I click on the USB Icon, I can select my GA II LCD to be ejected, but of course not going to do that, just let it be. If accidental click on eject, all is needed is to either go device manager to scan for hardware or to reboot your system.
I can only get 2 out of 4 plugs to work I have bought multple controllers. I'm about done.. I can only power two sets of fan the other two plugs show the fans at 0 rpm and will not tuen on with the others...
Hello Mr Rod. Maybe watch this which might aid you out ruclips.net/video/CgvuUFeff8U/видео.html
I fusing the L-Connect 3 software to control your CPU & GPU fans (AIO Coolers) rather than connecting those fans headers to the motherboard.
In the software you can say "This group is controlled by CPU/GPU temps" but what happens in BIOS, or even a dual boot system with an OS that doesnt run the software?
Will those fans run automatically from the signal from the pass-thru connection of the controller, run at full speed, or not run at all?
Hi Vicious Computers, welcome to my channel. For your case, it will run at silent mode and does not pickup from your bios even if you did plug the cable between the controller to your motherboard PWM fan header.
@@KleoYan Ok, good to know. I'll need a few single fan cables that break out to the separate aRGB and PWM Fan connection then will put them on the controller in a sync port and plug the fans into the motherboard directly most likely.
I do not dual boot linux anymore I just use WSL or use a VM and in bios silent mode would be good enough due to the low demand on the system, but kinda still "better safe than sorry"
Just would be nice to control everything from one place and not need another software for those fans.
Hi, thanks for the thorough video!
just one quick issue I have, I'm unable to control my fans with L-Connect 3 at all - I only plugged in the standard USB cable + SATA and no response from when I make changes in L-Connect. It's able to acknowledge my controller and fans, so everything is connected. Just not sure why the settings aren't applying from L-Connect.
moreover, L-Connect 3 is up to date, and so is the firmware! Also checked Device Manager, and didn't see any exclamation marks or issues
@@dubchung hi welcome to my channel, did your temperature in l-connect 3 respond when u do some benchmark. If your temperature readings do not move that could be the issue.
same issue here. did you manage to fix this yet?
Hello friend, can you help me? I also have an nzxt hub but the l conect does not recognize my strimers and fans, can you help me??? I already updated the motherboard drivers in the manager, lianli does not appear in the drivers, I cannot make it work in any way
Hi Yuri Ferreira, welcome to my channel. Did you test it without the NZXT internal hub. Do it one controller at a time. does your Windows OS detect the controller?
Sequence as follow 1st plug uni fan controller. does it detect? if yes, remove the controller, plug the strimer plus V2 controller. does it detect? if individually detects, then plug your NZXT Internal hub. if it does not work, means you either did not plug the sata power source to your NZXT Hub or your hub is faulty.
Hi again Kleo, I had a question on how to connect the lian li uni fans sl infinity to my motherboard, I’m using an MSI Mag b550 wifi max motherboard and it only has 2 argb headers. One at the bottom of the mobo and 1 at the top i plan on using the galahad 2 trinity on the side of the case which is the lian li o11 vision, 3 fans at the bottom and 2 on the rear as exhaust, i need help as to how im going to connect these fans into the argb headers on the motherboard and have no clue. Would there be an option of not plugging these in at all and still having the fans rgb with the lian li l-connect 3 or is it mandatory to plug all of these fans in. Sorry if this is long im just very very confused and this is also my first build.
Hi Fisnik Hoxha, welcome back. Your Uni fans on the Uni controller, you do not need to plug it to your motherboard ARGB header. You can use the L-Connect 3 app to control the Uni fans. So that will save your issue.
Can I connect my stimmers to my SL hub? And just use one hub instead of two? Also I have the lian li 216 case how do I get my front fans to sync?
Hi cookiecook1000, welcome to my channel. It’s good that you asked. Kindly do not do that. Strimer plus draws a lot of ampere, that’s why it has its own controller / hub.
As for the 216 fan ARGB. There are no dedicated dash board in l-connect 3 app but you can plug to any Uni controller that has a sync 2 and 4 port.
Lian Li should make V3 consolidate this issue across all their RGB products. People who buy Lian Li fans are more likely to buy Strimer Plus cables like me and the fact they don't consolidate this is a head shaking moment.
Hi Snow Coconuts, welcome to my channel and Merry Christmas. This I have to agree with you, infact best if you can highlight this at Lian Li reddit and have others to support your idea which is good in my opinion. www.reddit.com/r/lianli/
@@KleoYan hi Kleo! I'm a long time sub now! Merry Christmas to you too! I might just do that at your recommendation! Enjoy your holidays!
@@snowcoconuts8660 you too buddy, all the very best with your build too 😉
Great video👍! I do have one question if you can help me: can I connect 2 L-connect-3 hubs (3 fans in each controler) and a strimer v2 hub (24-pin cable and 8-pin gpu cable) into a single ARGB header on the motherboard with a splitter? Or would that be to much for the header?
Hi Sebastian Oana, welcome to my channel. Yes you can do that as all the argb devices are drawing current from it's controller. Just make sure that the sata source are plug to your various lian li controllers.
Awesome, thanks!!😊
@@seb9925 most welcome. All the best with your build too 😉
Hi Kleo! Really great videos as I am trying to troubleshoot my rgb case but none seem to have worked for me in terms of Lian Li's Dynamic Evo case RGBs, not sure if you have come across this issue before? Thanks!
Hi Hikyubeast, welcome to my channel. Maybe list down what are the lian li argb products and to let me know what kind of liquid AIO or air cooler, inclusive of your motherboard you are using. Then I will try to help you out. if you need to show me pictures, you can send to my email @ godzylatech@gmail.com
Appreciate it!!
@@hikyubeast most welcome.
@KleoYan sent under Ryan thank you! The bottom rgb strip only a portion seems to be lighted. Thank you
@@hikyubeast check your email, I have replied. 😉
Hello, can i just directly plug my SL-INF fans into the motherboard without the UNI controller? Will L-Connect still be able to control the RGB?
Hello Forested. Welcome to my channel. L-Connect 3 app will not be able to control your SL INF fans with the Uni controller. Unless you don’t use L-Connect 3 app and to make use of motherboard ARGB app, then connect them directly to your motherboard and please take note of the ampere when you do that. Check your motherboard menu what’s the max load for ARGB and Fan load of each header.
@@KleoYan Hello, thanks for your reply. My motherboard is the Gigabyte Z790 Aero G. Will it be able to control the RGB simultaneously with it as well? Also, is it okay to buy ARGB splitter extension cables for my fans? (3+3+1+3 cooler)?
@@forested I would advise you to use the Uni controller but if you do not want to. Get a ARGB hub with power supplied from your PSU. Getting an ARGB splitter for the quantity of fans plus your other ARGB devices. The motherboard ARGB header will not be able to provide the ARGB load.
Is it best to use L connect when all the rgb fans are connected to the 216 case controller? Or do I stick to motherboard rgb control?
Hi Steven Cooley, welcome to my channel, you are not able to use the L-Connect 3 without a controller or hub (Uni fan controller or Strimer Plus V2 controller), which specifically taking instructions from L-Connect 3 app. The case argb controller does not pick up the instructions from L-Connect 3 app, therefore you will have to connect it to your motherboard and to use the motherboard utlity to control the argb effects.
No VGA fan speed be synced and the app always pops up when PC wakes up from sleep, that's what I got with L-Connect 3.
Hi Vu Hoang Thuan, welcome back, L-Connect 3 does not control your GPU fans, it will only monitor the temperature. as for your error, I have no idea why it pops up. have you try swaping on L-Connect 3 PWM dashboard to monitor CPU instead of GPU?
@@KleoYan Thanks for your quick response. In fact, my L-Connect 3 app was set to sync with CPU, not GPU.
@@vuhoangthuan326 I see. Have you tried re-installing the L-Connect 3. Before you re-install it. Totally remove the app using revo uninstaller. See if it works.
Really nice video! I will install soon several tl lcd + normal ones so if i understood everything (i am French :D) i dont need to use pwm and argb 5v ports because usb will do the job if i go through Lconnect3, right ? Thank you very much
hi Ji M, welcome to my channel and yes you are correct. L-Connect 3 will control the argb and fan pwm.
@@KleoYanThank you very much !
@@kanj1 you are most welcome and all the best with your build too.
This video is awesome ! one question though with the new lian li infinity hub and the new strimmer v2 hub can we do the same method of linking them with the arbg cable kit? I have all the cable just need to know if it is ok to do still? So I can control both with L Connect 3? Or is a usb hub needed?
Hi Anthony Lowe, welcome to my channel. Both has a controller. You will need additional USB header will do. If you choose to plug the strimer plus together with the uni controller, it might not work as in, the strimer plus will not reflect on the L-Connect 3 dashboard, therefore you lose the argb patter effects.
Hi, my fans went full speed from the software. I had to switch controllers to stop it from spinning at max rpm. How do I prevent this from happening again?
Hi chrome, welcome to my channel. did you check if your device is listed in device manager?
@@KleoYan Yes it is listed as lian li unifan.
@@chr4me ok try this.
1) Make sure your motherboard bios is up to date, please check on your motherboard manufacture website, under support > bios and drivers. See if there are issues with USB and do they have a fix. If there are, kindly update those bios firmware version.
2) Make sure your chipset driver for your motherboard is up to date! For AMD will be at www.amd.com/en/support for Intel will be Intel Driver & Support Assistant Intel DSA www.intel.com/content/www/us/en/support/detect.html
3) Remove all argb apps (Asus Armory Crate / MSI Dragon Center / Giga Fusion / Asrock Polychrome). If the brands which I have mentioned, do have a uninstall tool like the Asus Armory Crate, use that, else use Revo uninstaller ( www.revouninstaller.com/ ). Revo uninstaller will remove all unwanted files / folder / registry in your system. Illustration to use revo uninstaller ruclips.net/video/uMgUYiakpxM/видео.html
4) Shutdown your PC, unplug the PSU cable from your AC outlet. Press the power switch twice to discharge all current that your motherboard is holding. Leave it for 45 second
5) Plug Uni controller with one fan
6) Plug the power cable and turn on your PC
7) Go to your Device Manager, look under Universal Serial Bus Devices, make sure you see the Lian Li uni controller
8) Install the L-Connect 3 app only lian-li.com/l-connect3/
9) After installation, run L-Connect 3, check under Setting > General > make sure Auto-Run on Boot and Minimized L-Connect 3 to system tray at close are ON.
10) Reboot your system.
11) First thing you need, go to device manager and see if the Lian Li controller is listed, next open up the L-Connect 3 app. Check if there is a need to update firmware to your controller. Go to Settings > Update, under Device F/W version, click on Update Check, download and install the firmware. Make sure the firmware is completed. Do a check on device manager and make sure the Lian Li controller is listed.
12) On L-Connect 3 dashboard, check if the CPU and GPU readings are reacting, you might want to test it using some benchmark programs. If there are reaction, play with the PWM and argb functions. If it does not work, skip step 13) and proceed step 15)
13) If Single controller works, shutdown your pc, connect uni fan set of 3 to your output of your uni controller. Do it small steps at a time to hook up your sets of fans. do not do all in one go. If successful and you have a second controller, proceed small step at a time again.
14) Slowly plug back your USB devices (Headset, Microphone, Printer, USB Capture Card and etc). At any point of time as you add those devices one at a time, if L-Connect 3 become unresponsive. This tells you that there power is insufficient to power up more USB Devices. Whatever USB port on your motherboard, there is a limitation as the current are shared across the board, be it front or back I/O and the internal USB Header. You might need to get a Internal USB Hub that comes with a Sata Power source to the Internal USB Hub. (Disclaimer, buying a internal usb hub might or might not resolve this issue, purchase at your own expenses)
15) If it does not work, report your issues to Lian li Tech Support. There is a in build log ticketing system in L-Connect 3 app. this is what you need to do. Go to Settings > Support > Click on “Download log” place a filename and choose a destination drive to save the log file. Next click on “Report” it will take you to Lian Li Tech Support FAQ. Fill up the form and upload the log which is a zip file.
Hello! I’m from Singapore too! Thank you so much for your hard work in making this video~ I would like to ask about the Lianli strimer plus. Can I use L connect or L connect 2 to control the strimers? I have a triple 8 pin and a 24 pin. Both are v1. I have the v1 controller, but it seems like a purely manual controller that I have to open up the case to change the lighting effects, also there are only 7 colours and no gradient rgb effect. If I want gradient rgb, I have to press m1 to pass the control to the motherboard software, in this case I have a asus motherboard that uses armoury crate and the lighting effects in armoury crate are the opposite. That means I can have gradient rgb but I am unable to achieve the lighting patterns of the controller. Is there a way that I can get more rgb lighting effects like by using another software without opening the case every time I want to change the strimer plus lighting effects? I do not have any lian li fans, I only have strimer plus v1 and the v1 controller. When Thank you!
Hi Imogen Infinity, welcome to my channel. You have two choices. 1 is to purchase a Strimer Plus V2 controller. you can refer to these video ruclips.net/video/J76Zyd1GzNA/видео.html or ruclips.net/video/uWNZO2HVgxE/видео.html. 2 is to try out Signal RGB, this is an application which others are talking about which you might want to search from google or youtube about this app. I myself have not tried this but you can do some reasearch about it.
i am using galahad aio 360, i have connected the fan and rgb wires to the mobo. do i use the controller connection method before i can use the software to control?
hi DX Liu, welcome to my channel. if you are having uni fans on your galahad, it's good to have fan connectors to your motherboard and plus the fans to the uni controller, use L-Connect 3 app to control the argb effects.
I know this is a year-old video but I do have one question. L Connect 3 doesn't show my CPU fan speed under the System Resource tab like I see in your video. There's no graph at all other than Temperature and Clock Rate. The "Fan Speed" bar doesn't show at all for me.
Hi The Kontrarian, welcome to my channel. Mind if I ask if you have other argb devices or argb programs running before L-Connect 3. Also just the controller itself. is your windows able to detect the controller, under Device Manager > Universal Serial Bus Devices.. last but not least, can you listen down the PC components in details, else I can only diagnose in general.
@@KleoYan sure thing. Thanks for responding. My setup I have 10 Lian Li SL Uni 120 fans. 3 on top as exhaust, 3 reverse blade on the bottom as intake, 3 reverse blade mounted on a side radiator as intake (NZXT Kraken 360 Elite) and one rear fan as exhaust. I have the Lian Li controller with all fans going through the controller. No groupings daisy chained. 3X3X3X1 into each port of the Lian Li control box. Control box going in a USB header. Not using the separate cable connected to the control box to the motherboard to bypass L Connect 3. My AIO cooler I removed the default fans that came with it and installed 3 Lian Li reverse blade fans instead. The NZXT AIO pump is going into my CPU FAN header. The NZXT AIO has a program NZXT CAM software to control fan RGB and fan speeds. But I’m not using the default fans so no RGB functions or speed control. No other RGB going into the motherboard. My RAM is RGB but controlled by the motherboard. Gigabyte B650 Gaming motherboard does have built in ARGB (Gigabyte Control Center) to control RGB but only the RAM RGB I can alter being I don’t have the Lian Li control box connected to the motherboard with the extra cable. I am controlling all fans with L Connect 3. Only one control box. No strimmer extension cables or additional USB hubs. Device manager recognizes the Lian Li controller. Firmware and Lian Li software up to date. Latest bios on motherboard and Windows 11 Pro.
@@KleoYan I can control all fan speeds, RGB etc with the L Connect 3 software. However, I doesn’t show CPU fan in that window likes yours does. Also it doesn’t show a picture of my uni fans at the top of the speed control like yours does.
@@TheKontrarian on your motherboard UEFI, have you set the fan mode to PWM instead of Auto. that could be the issue. give it a try and on L-Connect 3, make sure the fans you are using are highlighted. It's under settings of your L-Connect 3 app lian-li.com/l-connect3/l-connect3-manual-2/. btw why do you connect your pump to the CPU_FAN? you should be pluging your pump to AIO_Pump hmm.
@@KleoYan I will give it a try. I know the fan mode is definitely set to auto in the bios. As far as where to plug in the AIO. On the motherboard at the top I see CPU_OPT, CPU_FAN, and SYS_FAN1. I didn’t see a PUMP fan header at the top like I have seen on some motherboards. However, all the way at the bottom of the motherboard I do see a SYS_FAN3_PUMP. Should it be plugged in all the way down there? I thought it would be rather odd. That’s the only reason I plugged the pump in the top CPU_FAN header at the top. The motherboard is a Gigabyte B650 Gaming X V2 motherboard. If you’d like to see pictures of it.
I can only find a non powered internal usb hub i just need it for a 24 pin strimmer and a gpu strimmer or will that cause problems ?
Hello Deadpoolisdead, welcome to my channel. You can give it a try as my experience are with multiple controllers.
спасибо за видео!
Hi Alexandr Kalashnikov, welcome to my channel and thank you for your feedback. all the best with your build too.
What if you are running two GPU's? How does L connect detect that?
Hi Claus Bohm, welcome to my channel. If you are using 2 x GPU, you will need two strimer plus V2 controllers and yes L-Connect does detect both V2 controllers with separate controls on the L-Connect 3 application.
If anyone of you have the issues with L-Connect 3 app, below are some troubleshooting steps
Basic Troubleshooting steps
Disclaimer : Though the chances are very low to brick firmware updates on motherboard and to any controllers. I will not be responsible if you have brick your motherboard or controller.
1) Make sure your motherboard bios is up to date, please check on your motherboard manufacture website, under support > bios and drivers. See if there are issues with USB and do they have a fix. If there are, kindly update those bios firmware version.
2) Make sure your chipset driver for your motherboard is up to date! For AMD will be at www.amd.com/en/support for Intel will be Intel Driver & Support Assistant Intel DSA www.intel.com/content/www/us/en/support/detect.html
3) Remove all argb apps (Asus Armory Crate / MSI Dragon Center / Giga Fusion / Asrock Polychrome). If the brands which I have mentioned, do have a uninstall tool like the Asus Armory Crate, use that, else use Revo uninstaller ( www.revouninstaller.com/ ). Revo uninstaller will remove all unwanted files / folder / registry in your system. Illustration to use revo uninstaller ruclips.net/video/uMgUYiakpxM/видео.html
4) Shutdown your PC, unplug the PSU cable from your AC outlet. Press the power switch twice to discharge all current that your motherboard is holding. Leave it for 45 second
5) While waiting, please do not use KVM switches. Disconnect all devices that are connected to your motherboard (front / back IO). Leave only your Keyboard, Mouse , Monitor and Ethernet (If you have) connected directly to your motherboard.
If your monitor has a KVM build-in, remove the USB cable from your monitor to your motherboard USB socket. If your mouse and keyboard are connected to your monitor, please remove them and plug them directly to your motherboard instead.
6) Plug only one Uni controller or Strimer Plus V2 controller. If its for Uni Fan (SL/AL) use only 3 fans to an output of the uni controller.
7) Plug the power cable and turn on your PC
8) Go to your Device Manager, look under Universal Serial Bus Devices, make sure you see the Lian Li uni / strimer plus V2 controller.
9) Install the L-Connect 3 app only lian-li.com/l-connect3/ (current version 1.3.16)
10) After installation, run L-Connect 3, check under Setting > General > make sure Auto-Run on Boot and Minimized L-Connect 3 to system tray at close are ON.
11) Reboot your system.
12) First thing you need, go to device manager and see if the Lian Li controller is listed, next open up the L-Connect 3 app. Check if there is a need to update firmware to your controller. Go to Settings > Update, under Device F/W version, click on Update Check, download and install the firmware. Make sure the firmware is completed. Do a check on device manager and make sure the Lian Li controller is listed.
13) On L-Connect 3 dashboard, check if the CPU and GPU readings are reacting, you might want to test it using some benchmark programs. If there are reaction, play with the PWM and argb functions. If it does not work, skip step 14) and proceed step 16)
14) If Single controller works, shutdown your pc, connect uni fan set of 3 to your output of your uni controller. Do it small steps at a time to hook up your sets of fans. do not do all in one go. If successful and you have a second controller, proceed small step at a time again.
15) Slowly plug back your USB devices (Headset, Microphone, Printer, USB Capture Card and etc). At any point of time as you add those devices one at a time, if L-Connect 3 become unresponsive. This tells you that there power is insufficient to power up more USB Devices. Whatever USB port on your motherboard, there is a limitation as the current are shared across the board, be it front or back I/O and the internal USB Header. You might need to get a Internal USB Hub that comes with a Sata Power source to the Internal USB Hub. (Disclaimer, buying a internal usb hub might or might not resolve this issue, purchase at your own expenses)
16) If it does not work, report your issues to Lian li Tech Support. There is a in build log ticketing system in L-Connect 3 app. this is what you need to do. Go to Settings > Support > Click on “Download log” place a filename and choose a destination drive to save the log file. Next click on “Report” it will take you to Lian Li Tech Support FAQ. Fill up the form and upload the log which is a zip file.
In what state is L connect 3 today? Do you know if it is running smooth now or is it unstable?
@@bergdk237 Hi, welcome to my channel. so long you do not over add too many argb devices, hubs, controllers, more fans more led strips and such.. it will be rock solid stable. If you asked me, there are only bugs, no instability issues. I get most of the PC builds for my friends or colleagues which works flawlessly without instablity issues. Most bugs are fixed anyway. For info on what are the fixes, kindly refer to the log lian-li.com/L3-changelog/. Also in most of my builds, I dont use motherboard argb utitlies, on top of this. I often make use of ASRock motherboard where you can turn off and on the argb effects within the UFEI / Bios without installing argb application in windows.
@@KleoYan Thanks, I got some AL120 fans(the 3 pack) Should I just go straight to installing L connect 3? Or would it be better to just Install L connect 2?
@@bergdk237 go straight L-Connect 3, follow this video guide, be patience and it will eventually work out for you. also take note on some important points which I've pointed out in this video. Rest will just rush it and rant about it and blaming L-Connect 3 is the cause of it. Infact it's not.. just that the argb IRQ in windows is shared, therefore all argb utilities are fighting for top piority to use the same IRQ which ended up instablity, crashes, delays and many more. Just keep argb application simple and to use suite devices. unlike some which add argb aio pump block, LCD display and such.
@@KleoYan ok thx, it is the only Argb fans ect. I got at the moment, only got RGB ram, rest is not RGB. so it will be very simple for now. I mainly got them to test them out in my current pc to see if I like Lian li Argb fans and software and controller, before I upgrade my system later this year.
Make 1 simple advance powerful hub and simplify the whole eco system. I don't want to have multiple hub and cable clutters in my system.
Hello mint hos, welcome to my channel. Yes everyone wants a one hub does everything. Maybe it will be a good idea to post your comment at Lian Li's reddit page, at least they will see comments and might come out with a solution www.reddit.com/r/lianli/
Hi, I bought 3 lian li fans, the first is a Lian Li UNI FAN SL-INFINITY 120 RGB (No controller included) and the other two are Lian Li SL Infinity 140mm (Without Controller). I connect the fans to the following fan hub: "Thermalright ARGB Fan HUB", that hub is connected to my B650E-F motherboard. The fans work, they turn on the default RGB, but in the L-CONNECT 3 program the fans do not appear so I cant control the RGB and RPM. What did I do wrong? What I can do? all the best.
Hi lain, welcome to my channel. Lian Li uni fans do not work this way. You need to have its own Uni controller/hub to work with L-Connect 3 application, as there are specific firmware on the Uni controller/Hub. You can’t just use other brand hub.
@@KleoYan I understand, but if the uni fan-sl-infinity I bought them separately which means they didn't come with the controller, what option do I have? Because I was looking and I can't find that controller to buy separately, Only the pack of three fans is the one that comes with the which was not the one I bought, since I got all 3 separately.
. I forgot to mention that I have the lian li strimer V2 (controller included) and they do appear in the L3-CONNECT (Ver 1.74)
@@lain1178 Hi, that's for sure as there is a strimer plus controller. as for the SL Inf controller, not sure if you can see this www.aliexpress.com/item/1005004600755700.html (Black) and www.aliexpress.com/item/1005004600649607.html (White)
Hey, do you have a video on your channel showing how to wire properly the O11 Dynamic Evo, Strimer Plus V2 and Uni Fan SL-infinity? I have trouble with it. Do I have to plug the 5v RGB from each controller and case? If yes, do you plug it for example the case rgb 5v into the fan controller and then to the MoBo? Or does it have to go directly to the MoBo? What happenes, if I dont plug the 5v RGB? Thanks in advance! You do very good videos!
Hello SKY, welcome to my channel and sorry to say I do not have this case, therefore not able to advise you on the connection. You might want to ask others at lian li Reddit forum. www.reddit.com/r/lianli/
Quick question. I'm using this program for my strimer cables but I have a different brand of fans in my case. Is that why I don't have the options to change fan settings?
Hi Kirk Russell, welcome to my channel. you will only get to use the L-Connect 3 application when you have the uni controller, it does not work when other brand fans are just connected directly to the motherboard via the fan header or the argb header.
I have the 12vhpwr v2 strimer and the 24 pin v2 strimer. Problem is i cant even get them to light up or even show up in l-connect 3. Are they not compatible?
Hi JP Kix, welcome to my channel. Do a basic check, are you able to see the controller under device manager? if yes, you might want to do a manul firmware update. You might want to refer to this content ruclips.net/video/CgvuUFeff8U/видео.html I do understand is lenghtly but take your time to digest and to understand how it works.
@@KleoYan when i check under "device manager, the only things to show up are "6K7750"
"Aura LED Controller"
"NZXT Kraken Elite"
Thank you for vdo. but I would like to include the Lian Li Galahad II Trinity SL-INF 360 in all of these connections.
I'd like to see all these Lain Li equipment connections.
1.UNI FAN SL-INFINITY 120 Triple Pack
2.UNI FAN SL-INFINITY 120 Single Pack x 3
3.Galahad II Trinity SL-INF 360
4.Strimer Plus V2 24-PIN and 8-PIN
@@kwan.sukkitroj hi welcome to my channel. Just for your info, you will need 3 controllers. 1st is the SL-Infinity controller which you can hook up to 4 of your fans. Next is the Strimer plus controllers for your 24pin and 8pin stripes and last will be the controller for your Galahad II Trinity SL-Inf 360 (this you can't combine to one SL-Inf controller) as for your reqest, do pardon me. I have donated them to charity, unable to illustrate to you.
@kleoyan i think my situation applies to this post also, but i want to make sure… so i have the galahad II lcd sl infinity plus 6x sl infinity reverse plus 1x sl infinity for rear exhaust plus the 3 sl inf that comes with the aio. Can i connect all of them to the hund that comes with the aio or should i buy the sl infinity hub (the one with the sync ports) for the fans only and leave the aio one for only the galahad and the fans included ? Really appreciate if you can clarify this for me 🙌
man the SL120 before got a cable connecting the other fan the newer unify one got none hey
Hi Deter Gilapay, welcome back. All uni fans in future will be in this way. Unless getting individual pack.
Hello man, great video bro. Can you tell me if I can control the argbs of the lian li infinity fans without connecting the controller to the usb connection, just with the argb connector on the motherboard?
Hi Lucas Duran, welcome to my channel. You can do that with a individual pack. If you get the tripple pack, it will not be possible. If you do get individual pack, make sure not to daisy chianed more than 3 fans to each of your motherboard fan header, as each of your motherboard fan headers have a load limitation.
@@KleoYan In this case, I will need a USB extender for the motherboard, right?
@@lucasduran6753 it greatly depends on how many controller you intend to plug to your motherboard, but if you do need a usb extender, I would advise you to get this instead of the NZXT internal hub. www.aliexpress.com/item/1005005121350909.html
With L connect can you set fans to 0% when temps are low?
Hello MaxAltair, welcome to my channel. Yes you can.
Hi, awesome video but I have a question, I got infinity fans and how can I control them using motherboard bios? As I see an argb port but not pwm port so I'm confused on how to do it, I got an asus motherboard.
Hi Vigilante, welcome to my channel. if you have the argb and fan cable connected between your uni fan controller / hub to your motherboard, in L-Connect 3 app, set to motherboard mode on at Quick Sync Lighting. as for your motherboard to control, you might need your motherboard utitlity, example Armory Crate for Asus, Mystic for MSI or Fushion for Gigabyte or Ploychrome for ASRock.
@Kleo Yan yes i already did that, thanks for the reply.
@@vigilante9259 you are most welcome.
Hey, what would you recommend my RPM to be at? I built a PC and just noticed my quiet RPM was 1200 so my fans were always loud. So I changed my base RPM to 800 now, but not sure if it automatically speeds up when the GPU / CPU hit higher temps.
What would be a good RPM for certain temps? Just don't want my computer getting too unnecessary loud. I have 9 SL V2 vans in at the moment. Also which line is better curved or straight to change the RPM?
Thanks!
Hi Jesse, welcome to my channel. In general from temperature 30 to 55. I will run 900 to 1k rpm. From 55 to 70 I will run 1k to 1.2k rpm. From 70 to 85 I will run 1.2k to 1.5 k rpm and from 85 to 100 will be at 1.5 to 1.8k rpm.
Hi Kleo, I'm about to start building my PC using an ASUS Z790-Pro MB, with all Lian Li fans and an AIO cooler. My question is about Aura Sync and enabling the Lian Li fans to use Aura sync, rather than L-Connect 3. Is that possible through the L-connect 3 settings? Thanks, Mark.
Hi Mark Howell, welcome to my channel. Yes you can do that, you will still need the Uni control and L-Connect-3 though. Also make sure to connect the 3pin 5V ARGB cable between the Uni controller to your motherboard ARGB header. Once you did these, in l-connect you have to set sync to motherboard under Quick/Sync lighting menu and enable sync to motherboard.
That is exactly what I need to know. In my case, I will have 2 controllers, 1 for a 3 pack of fans, and 1 for the AIO, so as long as both of those are connected to an ARGB header, I should be good? Thank you for the quick reply, I appreciate it.@@KleoYan
@@markhowell183 my pleasure and you are most welcome. Yes that’s correct. All the best with your build too. 😉
can someone please help me with this i have everything plugged in to the psu the sata cables and downloaded l connect software and the fans turn on and spin but they dont light up and im not sure why
Hi OneBustedPimple, welcome to my channel, I like to ask if you did see the lian li controllers listed in your windows os, under device managment? and when you launch L-Connect 3 app, does it reflect all the temperature stats?
does having l-connect 3 affect pc fps performance like other rgb software?
Hello Box, welcome to my channel, best to optimise a pc is not to have argb, get performance case fans and cooler.. without any background running apps you will optimize more system performance. Which this is the truth. Once you start to use any software that uses background process. your FPS will slightly drop.
Hey, have you any idea how to resolve an issue with the Lian Li L-connect 3 software that is causing a "gradual" freeze on my entire PC? It's like a lock-up but nothing is responsive. I can't open things or do other things that requires write/read. So if my browser already loaded up a page, I can scroll and continue browsing, but I can no longer see anything new like clicking on a link or part of the page that wasn't loaded will not be loaded. Task manager and other monitoring programs would cease to function and display only the last known result before the freeze. My system clock would also freeze at the time it starts.
I've uninstalled the software and haven't had the freeze now. I've troubleshoot this all the way down to the list and narrowed it to either the mobo faulting or something else like software. I came to the conclusion that it was the L-connect 3 that is causing it occur randomly.
The software works, I'm able to see accurate reading of the temps and rpms of the fans. I'm able to adjust the RGB of my fans and strimer v2. However if I have that program up, it will eventually gradually freeze my PC. Sometimes it will happen as soon as I finish booting up, when its automatically started up. Sometimes it would go on without it occurring for 10+ hours, or a day or two. It's totally random. All I know is after I've uninstalled the software, its been smooth sailing.
I'm using just two Lian Li controllers, the one for the SL v2 fans, 9x and one strimer v2 mobo cable.
Mobo is an Asrock X670E Steel Legend, and cpu is a ryzen 7800x3d.
My software installation was on the primary OS ssd, which is connected directly to the CPU, not sure if that could cause an issue.
Thanks for the help if you could provide. I've looked all over google and so far I've been people describe the same situations but they all have different specs. None of which had proper solutions. My PC was just built almost a month ago just for more info.
Hi ElementXCR, welcome to my channel, after reading what you've gone through and all the troubleshooting steps which you've provided.I like to check a few things if you don't mind.
1) What's the version bios of your X670E Steel Legend?
2) What are the USB devices connected to your system?
I do have emails from viewers they are having issues. I told them to update the bios first and follow by reducing excessive USB devices which are connected to their system. you might want to try narrow down this. if it still does not help, I would adivse you to reach out to Lian Li tech support. lian-li.com/faq/
nevermind... the PC froze again after reinstalling L connect 3 then closing the program. I used the bypass cable so the mobos can directly do the fans and RGB without the need for L-connect.
And it froze randomly still. I guess there's a much more underlying problem on my PC... Ahh well, thanks for the reply and assistance.
@@ElemXCR you are most welcome. My guess is leakage of current. If you use too many usb devices. That’s the cause of it, as what I have experienced so far
thank you so much, one question please, i connected the strimer controller to an usb3 to usb2 adapter and the adapter is connected to my usb3 on the motherboard, and i can't see the controller under l-connect 3... it's because of the usb3 to usb2 adapter?
Hello my stuff, welcome to my channel, I have a few question have you tried to plug your strimer plus controller directly to the USB 2.0 header of your motherboard? and btw which adaptor are you using? it could be insufficient power on the adaptor.
i have a question about Lian li Galahad AIO LCD infinity. the L connect 3 is only allowing me to set rgb loop number to 50 max. and my 3rd fan in aio only lights 1/3 of the side rgb pannels. Do you know how to fix it?
Hi Axie 101, welcome to my channel. Just to check. Are you able to control the ARGB effects and to control the lcd? As for the Inf 120 fans where do you plug it?
@@KleoYan I did not build the pc. I am able to control argb effects and lcd.
@@axie1019 I see, reason I asked is. For the SL-INF version of the GA II LCD. It comes with the Uni controller. Therefore you need to have two usb cable plug to the motherboard usb 2.0 header. I would advise you to go back to the person who build your pc to troubleshoot for you. Or check on L-Connect 3 app. Under settings and devices. Are the fans connected to the controller all highlighted or?
Hello everyone.
I have a Lian Li build case and i added lately a new hydro Lian Li Galahad II. My problem is that i spent a lot of time customizing the rgb strimers + hydro and when i turn on the PC and the L Connect 3 software runs on startup it resets to the default all the rgb settings. Then i have to customize again and again. If i turn off the L connect 3 program and never run the software again it runs smoothly.
What should i do guys; Thanks 😊
Hi akis mpitsou, welcome to my channel. I like to check with you, can you launch your L-Connect 3 app, click on Settings and check if Auto-Run on boot and Minizmize L-Connect 3 to system tray at close are enabled. Also when you've done up your profile. you will be able to save your profile by exporting it to a physical file, just go to the dashboard (exmaple effects for your fans or strimer plus), on the top right you should have export and import.. use the export to save your settings and if in the event, it's mess up during operation, you can always import back your settings.
Hello friend, thanks for your message😊. My settings are both enabled as you mentioned with L Connect. I tried a few times to export my favorite RGB custom settings and import when things messed up but it never restored my favs. It always works on default settings. Its like auto syncing everytime. I have customized each strimer one by one with meteor and when the exe runs it restores everything to the defaults. If i use general lighting effects theres no problem. Only with solo strimers customization..
If you’re using the usb connectors with controller, do you have to use the RGB and fan header connector as well?
Hi DpHo888, welcome to my channel. nope you dont have to connect the argb or pwm connector between the hub and motherboard headers. Unless you intend to make use of motherboard utlity to control the fan's pwm and argb effects.
Thank you. I plan on using the L connect 3 as you did in video. This is a relief! Thanks for your video, it’s very informative!
@@DpHo888 you are most welcome and all the best with your build. 😉
I own the GALAHAD II LCD 360 SL-INF and the Problem I have is that the Software always is Pretty slow and when I change my RGB Settings it only changes after I restart the PC so not in Real time. Current firmware 1.4 is installed. Anyone else faced this issue?
Hello Heimdallr, welcome to my channel. Does it happened that you have other ARGB application installed?
@@KleoYan Thanks for your response. I have also installed the icue for my ram and Asus armoury software for my MB.
I have “3” 3 pack infinity fans so 9 total. I use only one hub instead of 3 hubs. Would that be why l connect isn’t recognizing my fans ? I have the strimmer v2 on its on hub as well but nothing pops up in the l connect 3. Everything does light up and work but not recognizing in the software. I’m running gigabyte x570 master
Hi TheLop3z, welcome to my channel, did your OS detact the uni controller? that will be the first part. maybe go through these steps and kindly do not miss any of the steps.
1) Make sure your motherboard bios is up to date, please check on your motherboard manufacture website, under support > bios and drivers. See if there are issues with USB and do they have a fix. If there are, kindly update those bios firmware version.
2) Make sure your chipset driver for your motherboard is up to date! For AMD will be at www.amd.com/en/support for Intel will be Intel Driver & Support Assistant Intel DSA www.intel.com/content/www/us/en/support/detect.html
3) Remove all argb apps as for your case is Gigabyte fushion, use Revo uninstaller ( www.revouninstaller.com/ ). Revo uninstaller will remove all unwanted files / folder / registry in your system. Illustration to use revo uninstaller ruclips.net/video/uMgUYiakpxM/видео.html
4) Shutdown your PC, unplug the PSU cable from your AC outlet. Press the power switch twice to discharge all current that your motherboard is holding. Leave it for 45 second
5) While waiting, disconnect all devices that are connected to your motherboard (front / back IO). Leave only your Keyboard, Mouse , Monitor and Ethernet (If you have) connected directly to your motherboard.
If your monitor has a KVM build-in, remove the USB cable from your monitor to your motherboard USB socket. If your mouse and keyboard are connected to your monitor, please remove them and plug them directly to your motherboard instead.
6) Plug only one Uni controller or Strimer Plus V2 controller. If its for Uni Fan (SL/AL) use only 3 fans to an output of the uni controller.
7) Plug the power cable and turn on your PC
8) Go to your Device Manager, look under Universal Serial Bus Devices, make sure you see the Lian Li uni / strimer plus V2 controller.
9) Install the L-Connect 3 app only lian-li.com/l-connect3/ (current version 1.3.16)
10) After installation, run L-Connect 3, check under Setting > General > make sure Auto-Run on Boot and Minimized L-Connect 3 to system tray at close are ON.
11) Reboot your system.
12) First thing you need, go to device manager and see if the Lian Li controller is listed, next open up the L-Connect 3 app. Check if there is a need to update firmware to your controller. Go to Settings > Update, under Device F/W version, click on Update Check, download and install the firmware. Make sure the firmware is completed. Do a check on device manager and make sure the Lian Li controller is listed.
13) On L-Connect 3 dashboard, check if the CPU and GPU readings are reacting, you might want to test it using some benchmark programs. If there are reaction, play with the PWM and argb functions. If it does not work, skip step 14) and proceed step 16)
14) If Single controller works, shutdown your pc, connect uni fan set of 3 to your output of your uni controller. Do it small steps at a time to hook up your sets of fans. do not do all in one go. If successful and you have a second controller, proceed small step at a time again.
15) Slowly plug back your USB devices (Headset, Microphone, Printer, USB Capture Card and etc). At any point of time as you add those devices one at a time, if L-Connect 3 become unresponsive. This tells you that there power is insufficient to power up more USB Devices. Whatever USB port on your motherboard, there is a limitation as the current are shared across the board, be it front or back I/O and the internal USB Header. You might need to get a Internal USB Hub that comes with a Sata Power source to the Internal USB Hub. (Disclaimer, buying a internal usb hub might or might not resolve this issue, purchase at your own expenses)
16) If it does not work, report your issues to Lian li Tech Support. There is a in build log ticketing system in L-Connect 3 app. this is what you need to do. Go to Settings > Support > Click on “Download log” place a filename and choose a destination drive to save the log file. Next click on “Report” it will take you to Lian Li Tech Support FAQ. Fill up the form and upload the log which is a zip file.