Build a FPV Drone with NO SOLDERING! The Plug & Play DIY Kwad.

Поделиться
HTML-код
  • Опубликовано: 22 дек 2024

Комментарии • 373

  • @JoshuaBardwell
    @JoshuaBardwell 2 года назад +139

    Kapper must be so happy right now. He's been pushing this for years. Great move.
    EDIT: Also, choppergirl has been pushing this idea for a long time and must be really thrilled to see somebody finally implement it.

    • @fastpenguin
      @fastpenguin 2 года назад +5

      hi bardwell

    • @niksi_fpv2313
      @niksi_fpv2313 2 года назад +2

      Joshuaaaa wasup

    • @PacketFPV
      @PacketFPV 2 года назад +6

      As much as I don't want to see our hobby watered down I must say this would have been really handy about 5 years ago when I first got into racing / freestyle. I spent the first 2 years building with a 20$ soldering iron from lowes and just didn't know any better. Now I feel like I'm a confident builder with a TS100 in my arsenal. I remember trying to fix my one quadcopter between heats when I crashed an feeling the time crunch trying to swap a arm / motor, with this system I could have swapped out a busted arm / motor in about 2 minutes tops. PS thanks for all your guidance over the years Bardwell, I wouldn't have made it without you.

    • @Clynikal
      @Clynikal 2 года назад +1

      Honestly they should just be direct soldering that plug onto the esc. Right angle low profile to sit inside reasonable standoffs.

    • @ChadKapper
      @ChadKapper 2 года назад +3

      :)

  • @ChainsawFPV
    @ChainsawFPV 2 года назад +36

    This is definitely going to help get new people in the hobby. I see so many frustrated comments from newbies that burn a ESC or FC while soldering.

    • @niksi_fpv2313
      @niksi_fpv2313 2 года назад +5

      I fried 2 esc and 1 fc and it costed like 60 dollars per stack i spend 700 dollar only for one drone

    • @divingfalconfpv4602
      @divingfalconfpv4602 2 года назад

      @@niksi_fpv2313 oh shit. Damn sorry

    • @niksi_fpv2313
      @niksi_fpv2313 2 года назад +2

      @@divingfalconfpv4602 Yup but i learned my lesson

    • @divingfalconfpv4602
      @divingfalconfpv4602 2 года назад

      @@niksi_fpv2313 live and learn. I just realized I rushed conformal coating for the snow and water while drones were together. Sticking brush in it. And I think I ruined all my drones baro. 4 drones.. 3 r long range drones so they need it.

    • @niksi_fpv2313
      @niksi_fpv2313 2 года назад +1

      @@divingfalconfpv4602 yeah i rushed and didn't pay attention while soldering thats why i fried few stacks

  • @neverenoughguns1
    @neverenoughguns1 2 года назад +2

    Solder free builds? ABSOLUTELY GENIUS! I love it! I will be getting one. Great video drew. Thanks rotor riot!

  • @neilfpv
    @neilfpv 2 года назад +2

    Every time I see Drew fly, I want to get up from my desk, go out and fly like him like my last rippage. Amazing easy build Drew!

  • @flightevolution8132
    @flightevolution8132 2 года назад +26

    Can't wait for banggood to come out with a version for half the price. It's wild that our industry moves so slowly that something like this wasn't made available 4+ years ago. I guess props for finally pushing this.

  • @OpaFPV
    @OpaFPV 2 года назад +2

    Newcomers: This is a great video! If this is your first build, watch this video several times. Drew keeps the pace moving and he drops tips from years' of experience not only from working on quads but turning a wrench. AND PLEASE, adhere to Drew's suggestions on safety. Keep the props off until he says so and his tests are mint! Enjoy!

    • @dangerous8333
      @dangerous8333 2 года назад

      Newcomers: Learn how to do things the right way first, then move on to something like this.
      This won't teach you anything about the hobby.
      I personally think this is also for veterans that don't have lots of time and doesn't want 10 backup drones.

  • @AleeshaFPV
    @AleeshaFPV 2 года назад +3

    I actually LOVE soldering LOL
    I feel like I'm living my childhood dream of building robots.

  • @launchfpv7144
    @launchfpv7144 2 года назад +29

    I love how you guys have made a really simple solution to a big problem for lots of people. I think we will see a lot more people building drones, with less stress of messing up the wiring and more fun of getting flying faster. I can just say one thing though, I would highly appreciate it if you could make an analog version of this drone because the DJI digital system is a very big investment, so a lot of people would be able to spend less on goggles. Anyways, thanks for the awesome video and great idea!

    • @Mr18031967
      @Mr18031967 2 года назад +4

      @launchfpv yep thats so true bro when i first stsrtid i flew box goggles for a year before i got fatsharks then sharkbyte and now over to the darkside of dji lol

  • @robertbrander2074
    @robertbrander2074 2 года назад +1

    Quadcopters used to be plug and play ... everything was Pins and Plugs a few years ago ... That's when Everyone was interested in just looking around calmly flying ... Until the Drone Punks showed up and Promoted ... Speed , Dangerous Flying , Stupid Tricks , Racing and Crashing .. including in and around buildings and structures ! ... Now , It's Not Cool to use your drone to fly in a Responsible Way ... You have to Fly like a Maniac ! ... The Punks got the notice of the FAA ... Now the Hobby is Regulated !! ... Thanks a Lot ! .... Now you're back to Plug and Play ...... LOL ! ... Amazing ......

  • @murphyking79
    @murphyking79 2 года назад +1

    Woo, first time in my life I watched a video 3hrs after it was posted

  • @c7491
    @c7491 2 года назад +1

    This makes the whole fpv hobby more feasible for people like me who just got into the fpv world. Great work! I work in a robotic lab while having access to all the equipment and knowledge to build a drone, but I still decided to get a pre-built drone from rotor riot. The value of having the correct configuration is often disregarded, I am happy that I don't have to get my head around to guess what will work for me since they provided a good place to start with. As a newbie who only flew two pack of battery.. I wanna say that flying fpv is insanely fun.

  • @juartdesign
    @juartdesign 2 года назад +2

    You just changed the game for new builders this is awesome!!!

    • @dangerous8333
      @dangerous8333 2 года назад

      Not really a builder at this point.
      Just an assembler.

  • @nq0amark138
    @nq0amark138 2 года назад +3

    Yeah, this is really going to help push the hobby forward for people like me that just don't have the time to build from scratch, yet still want to get our feet wet with the satisfaction of putting things together. Nice job !

  • @hippypunkdragon
    @hippypunkdragon 2 года назад +1

    I just ordered one of these. Looking forward to building it, and most of all, flying it.
    Thanks for what you all do!

  • @sylvest1001
    @sylvest1001 9 месяцев назад

    This video just made me cry. I'm currently building my first FPV drone and I've already destroyed two speedybee flight controllers with my utterly rubbish soldering. I'm not gonna give up. I've ordered a third and now I need to find somebody with good soldering skills. There's this guy in work I know :-)

  • @readysetjoefpv
    @readysetjoefpv 2 года назад +2

    Why did I think of this?!?! So intuitive and just practical, good job guys! Ive been building for years now and I may build one of these just to see how the motor connectors perform. Awesome vid for newbies!

  • @TheOuterDrive
    @TheOuterDrive 2 года назад +1

    About Time!
    Don't know why so many fpv guys are against this..
    Its like they look down on you if you don't want to solder...This seems like a super obvious thing to do. Now we just need snap on motors ..

  • @digitalpituitary5226
    @digitalpituitary5226 2 года назад +1

    Great job! Happy to see new and better ways to help people get involved in the FPV world. I'm excited every time Rotor Riot is mentioned. They're always doing something that goes viral! Thanks for continuing, to pushing past the limits

  • @RCDR1000
    @RCDR1000 2 года назад +1

    that is just a clean build. I have more than 20 drones and this might be my first build. thanks rotor riot

  • @thecornbreadwennie
    @thecornbreadwennie 2 года назад +22

    Soldering seems hard but if you buy the right equipment it's super easy

    • @k1ortia
      @k1ortia 2 года назад +1

      its not at all, its childs play. And every self builder or new commer can and should master this straight away.

    • @SilverFox80521
      @SilverFox80521 2 года назад +5

      But out in the field...imagine just plugging in a new motor. I kinda like it.

    • @robertfazekas4607
      @robertfazekas4607 2 года назад +1

      @@SilverFox80521 Im sure you can buy connectors, without any problem.

    • @robaxelsson530
      @robaxelsson530 2 года назад +1

      @@SilverFox80521 who brings extra motors to the field? I bring multiple quads, and batteries… but not motors..
      If u crash hard enough to damage a motor.. ur gonna have other components compromised

    • @SilverFox80521
      @SilverFox80521 2 года назад +1

      @@robaxelsson530 motors cost $15 while an HD quad costs over $300. Maybe if I flew analog I would have spare quads. 🤷🏻‍♂️

  • @darksheepvids
    @darksheepvids 2 года назад

    This is a cool idea and people can still fix their own stuff when they crash . Good way to expand the hobby .

  • @scu-dub
    @scu-dub 2 года назад +1

    "Soooo sweet"....in my Homer Simpson drooling voice 😁 this is really nice I was terrified when I got Into the hobby not so much with the soldering part but with all the flashing and updating the esc flight controllers ect ect but this will change the hobby for the better!!!! I can't believe someone had said fpv was dead !!!!! This is awesome you can never go wrong with plug and play anything!!!! It doesn't hurt to know how to solder though and do all the computer stuff lol then you can kick back and enjoy the hard work that the guys at rotor riot have done😁👍✌

  • @LeslieWorks
    @LeslieWorks 2 года назад +1

    Nice! I hope this blows up guys! Can't wait to see the kit and parts at best buy! Lol

  • @crazychange5635
    @crazychange5635 2 года назад +1

    I love building the drone more. It's just so kool you get to choose what you want and put what you want inside the drone build. Especially if it's all premium electronics parts. Soldering is annoying but I love it it's satisfying. Feel like I Learn a new skill feels good.

  • @filiped7298
    @filiped7298 2 года назад +35

    Now we need this with “choose your reveiver” option. And an analog version too

    • @MetaCake-
      @MetaCake- 2 года назад +1

      there would be twice as much setup and double the soldering for the people assembling the kits, increasing the price significantly

  • @whitmeade4834
    @whitmeade4834 2 года назад +3

    Man, this would have been awesome 2 years ago when I first started. My very first fpv build was a CL1, watching Drib's tutorial video on assembly. My soldering sucked and it was very intimidating but I got it done. This is great for beginners in the hobby.

    • @dangerous8333
      @dangerous8333 2 года назад

      I think this is a poor way for beginners to learn about the hobby.
      Like giving someone an electric guitar right away instead of having them learn on an acoustic.
      I'm not a beginner and I like it just because it's fast and modular and I don't need 10 drones, I can have one drone. And time is valuable so I can fly harder and not worry that my day will be over as soon as something broke.

  • @mattwilson1305
    @mattwilson1305 2 года назад +2

    I would've loved this when I started fpv but honestly now I really enjoy soldering. This will be a hit

    • @dangerous8333
      @dangerous8333 2 года назад

      Complete opposite philosophy as you.
      As I get older I'm getting busier. Not having to solder saves me time I can spend doing other hobbies/things. In the field this is great to have.
      Having a quick modular quad also means I don't need multiple backup quads.

  • @jana171
    @jana171 2 года назад +6

    What an amazing build, i love the motor connectors and actually did this myself when i was building a bunch of test motors(3D printed). It is such a nice little connector and will take all the amps it needs for the motors. But most of all, your prepping of the FC was brilliant, what a service to newcomers to have the PIDs tuned to match the build, i LOVE it ! Well, Well, WELL done !!!

  • @brendansimons6811
    @brendansimons6811 2 года назад +4

    Love this. Long overdue. My next quad will use this setup. (I wish the 3 pole XT connectors were more common)

    • @breakflight
      @breakflight 2 года назад +1

      The MR30 connectors are great. I also like the LEDs that can be built into them. The LEDs make the connector a race wire, but hardly anyone carries them...

  • @360vroomers
    @360vroomers 2 года назад +1

    Great idea. My only comment is that I wish you guys had put an ExpressLRS receiver instead (with JST connectors or something). The DJI controllers are a bit expensive and the range isn't as good as ELRS.

  • @MDog_FPV
    @MDog_FPV 2 года назад +1

    Very cool! Congratz on getting it done RotorRiot!

  • @jeanlucvassort6411
    @jeanlucvassort6411 2 года назад

    Excellent !!! thanks for the newbies in FPV assembly and set up. Very well presented and explained- Thanks

  • @raymond4191
    @raymond4191 2 года назад

    Genius! Made my day .. I'm hopeless at soldering. I'll order now!

  • @Joe_Sa_3rd
    @Joe_Sa_3rd 2 года назад +7

    Great idea, great video. Just a small suggestion to add for people just getting into the hobby. It's a good practice to twist all wires between the ESC and Flight Controller. Also do the same with the Air Unit to the Flight Controller. This will help reduce Electromagnetic interference and Radio Frequency Interference getting into the key components. With less noise getting into the Flight Controller it will be easier to tune.

  • @TrEeBLaZe
    @TrEeBLaZe 2 года назад +3

    Weeeeell only solder free if you're using the dji radio... besides that very convenient I must say!

  • @akifahmad6749
    @akifahmad6749 2 года назад

    This is great! Ease in building was really in demand! Good stuff!

  • @shadowexe3242
    @shadowexe3242 2 года назад

    Omg you are genius, thanks for making fpv so simple do everyone can build a drone 😊

  • @adams.3738
    @adams.3738 2 года назад

    I'm so bummed you're literally the ONLY ones in the world who sell such smolder free kits since you don't ship to my country. I really want to build my own quad but I have 0 knowledge in the field and wouldn't dare messing with smoldering or whatever programming/tuning is needed for the other diy kits. This is just a perfect bundle to both know your drone and fix it if it's broken without all the unnecessary complicated parts involved. I WISH I could get my hands on it in order to fully get into FPV. For now I'm gonna stay stuck with DJI FPV and forever fly cautiously cause the thing is fragile as hell. :/

  • @juartdesign
    @juartdesign 2 года назад

    Every company is going to come out with there versions after this video game changer awesome!!!

  • @integralogic
    @integralogic 2 года назад +26

    Cool stuff.
    DJI really missed the mark mark with their FPV. It should have been easily modular instead proprietary illogical engineering.

    • @Vousie
      @Vousie 2 года назад

      DJI purposely wants it proprietary stuff so you have to keep buying their stuff. Like the Apple ecosystem.
      Where they completely missed the mark is making the frame out of plastic & the entire drone being so fragile that people pretty much can't take the risk of flying it like a real FPV drone at all.

    • @Clynikal
      @Clynikal 2 года назад

      @@Vousie lol true. But also the OP is right.

  • @pdtech4524
    @pdtech4524 2 года назад +23

    I think a solderless design should be standard now, just simple plug and play, modular approach on components and how they connect together.
    Not everyone is comfortable with soldering etc

    • @guardianobserver6593
      @guardianobserver6593 2 года назад +1

      What kind of hobby is that then? Open your wallet and show your visa card till the next crash?

    • @pdtech4524
      @pdtech4524 2 года назад +1

      @@guardianobserver6593 It's just a natural progression of how building electronic devices usually developes.
      I remember a time computers came as kits you had to assemble and solder some components and wiring together etc
      Now everything is simple and easy plug and play!
      No reason FPV can't go the same route and still be a 'hobby'.

    • @dangerous8333
      @dangerous8333 2 года назад

      @@pdtech4524 The difference is people don't take their computers out, clogging the parks, cramming into smaller and smaller areas we have to fly.
      Computers don't cause new laws to be made because irresponsible lazy people that didn't have the time to learn soldering also don't know how to learn rules.
      Fpv is the last hobby I want the masses of simpletons to get involved in.
      I'm with Guardian on this.

    • @pdtech4524
      @pdtech4524 2 года назад

      @@dangerous8333 Drones are a niche thing and always will be, the 'masses of simpletons', you mention have no interest in them whatsoever.

  • @ethan0145
    @ethan0145 2 года назад +2

    I know everyone is looking at this from an ease of entry perspective. As someone who’s already deep in the hobby I see a huge maintenance advantage to this as well if this trend continues

    • @dangerous8333
      @dangerous8333 2 года назад

      I agree. That's the only thing I'm thinking about. I couldn't care less if more people get in this hobby, clogging up the parks and the airspace.
      Just because I know how to solder doesn't mean I want to. I'm a busy person.

  • @sjoer
    @sjoer 2 года назад +1

    What happened to the good old bullet connectors we used in the pre-F3/4/7 era? They are still used in many other RC hobbies, cars and planes for example!

  • @Hotwire_RCTrix
    @Hotwire_RCTrix 2 года назад

    Most impressive, it's no mean feat to make such a simple kit that is also repairable for a beginner.

  • @geebee7697
    @geebee7697 2 года назад +5

    I don'k know how DJI works but, for first time pilots, checking that the failsafe is working properly is another tip to share together with the other good ones in this video.

    • @mattynov
      @mattynov 2 года назад +1

      Was hoping I'd see this in the comments.

  • @adamdavis9539
    @adamdavis9539 2 года назад +4

    This is a really cool idea but maybe a analog build might be better for getting people into it. Is there a plan for a analog version in the future?

  • @Zener_Diode
    @Zener_Diode 2 года назад

    Soldering is my nemesis, this is great

  • @LehtusBphree2flyFPV
    @LehtusBphree2flyFPV 2 года назад +1

    THIS IS THE BEST INVENTION SINCE WOMEN.!!! THIS IS WHAT I NEEDED WHEN I FIRST STARTED BUILDING DRONES SO I DIDN'T SCREW UP ALL MY FLIGHT CONTROLLERS I STILL HAVE. I WILL DEFINITELY BE BUYING ONE OF THESE KITS BECAUSE I CAN SPEAK FOR EVERYONE THAT'S A BEGINNER SOLDERING SUCKS ESPECIALLY WHEN YOU SHAKE ALL THE TIME FROM NERVOUSNESS THEN YOUR OCD KICKS IN AND SOLDER BUBBLES DON'T LOOK LIKE SOLDER BUBBLES LOOK LIKE DEFLATED BALLOONS CAN YOU END UP TRYING TO MAKE THIS LITTLE BUBBLES LOOK LIKE BUBBLES END UP SCREW IN YOUR FLIGHT CONTROLLER UP. KEEP THESE KIDS COMING UP BECAUSE THEY ARE GOING TO GO HOT

  • @richarchdale6522
    @richarchdale6522 2 года назад +2

    I swear I caught LeDrib putting 2 different size spacers between the esc and fc. @9:44 in the video you can see it! I'm sure it was corrected but I caught ya! Lol Pretty awesome build and set up. 😎

  • @Gekketattas
    @Gekketattas 7 месяцев назад

    This is the exact thing i need its so easy and i like the feeling of do it yourself

  • @BigSQL
    @BigSQL 2 года назад

    Daaang. Getting one. Mind blown. So simple. 🤯

  • @Riicosuav
    @Riicosuav 2 года назад +1

    Just got mine today, got it done so far but unfortunately My kit didn’t bring the spacers and the most importantly bolt nuts to hold the components, another trip to get those important items. Regardless amazing kit and easy to build!

  • @napstersgear
    @napstersgear 2 года назад

    I remember buying my first FPV drone used from a person who tried to enter FPV but was expecting DJI stability (he was a cinematographer working on indie films). His build was mostly wired with connectors. I also remember crashing ever so often in my first flights due to connectors popping out. After my 2nd day flying, I removed most of the connectors and soldered the wires directly. But to be fair with RR's solderless build, the connectors used are much better than the connectors that was used on the used FPV quad that I bought a couple of years ago so plugs disconnecting mid-flight will likely be much less than what I experienced. I guess the guy I bought it from was planning for a more docile quad so using servo connectors and cheap power plugs was not an issue for him.

  • @SteveO4478
    @SteveO4478 2 года назад

    Wow! Wish I had it this easy when I first started flying back in 2016! Nice build!👌🏽

  • @francislamoureux
    @francislamoureux 2 года назад +1

    Very good idea, wish this would have been common when I started in 2016. I had as a 1st quad, a Zmr250

  • @Jandodev
    @Jandodev 2 года назад +1

    This is great to get more people flying!

  • @gastonfg
    @gastonfg 2 года назад +1

    Excellent concept and super duper video. Thanks ☺️. You Rock 🤘

  • @Gosuminer
    @Gosuminer 2 года назад +5

    The first no-solder drone I would actually buy. Still, at some point a bent prop will cut a motor wire and users should know what to do then. Of course, pilots who aren't that crazy about using the DJI controller will have to solder a receiver before taking this to her maiden flight.

    • @MindRiderFPV
      @MindRiderFPV 2 года назад +1

      Swap wire.

    • @dangerous8333
      @dangerous8333 2 года назад

      @@MindRiderFPV Right, but what if it's a wire that's soldered to the board?
      Ah, you weren't thinking about that were you.
      Hence why it's important to still learn how to repair these things the old-fashioned way. In fact, I don't even see this as something for noobs. I see this as something for someone that is busy or just doesn't like soldering. Just because I can solder doesn't mean I want to.

  • @emiltv
    @emiltv 2 года назад

    Thks to your video and great idea I just ordered one from you guys👍👍 long live Roto riot guys

  • @dialaprohq
    @dialaprohq 2 года назад

    great video. already know how to build but I think simplicity is one thing the fpv market needs a lot of work on. Building down to software.

  • @breakflight
    @breakflight 2 года назад +1

    I love the MR30 connectors that make the plug-in connection possible between the ESC and motors. I prefer to only tape down the arm side of the MR30 connectors, so if I break an arm, then swapping motors and arms is easier.

    • @JPTulo
      @JPTulo 2 года назад

      I was thinking this!!

    • @ziggyzbeak
      @ziggyzbeak 2 года назад +1

      its just a piece of tape LOL

    • @JPTulo
      @JPTulo 2 года назад +1

      @@ziggyzbeak A strategically placed piece of tape 😉

  • @levit8
    @levit8 2 года назад

    hope you keep innovating this idea, with lighter and better connectors etc

  • @nestorcarrasco
    @nestorcarrasco 2 года назад

    Amazing. Besides those goggles, my current DJI MINI 2 controller should work???

  • @phi-fpv
    @phi-fpv 2 года назад

    Nice vid Drib! I bought the HD1 and the old CL1 almost 2 years ago, since then, I have only replaced one arm on each and one top plate on the HD1 (no serious breakage one top screw rip through the carbon but still flyable). Dam good if you ask me... Rotor Riot sells very good quad frames. ... PS Please bring back the old CL1.

  • @South-Texas-Drones_5801
    @South-Texas-Drones_5801 Год назад

    I’m about to order this kit I can’t wait 🙌🏽🙌🏽

  • @oneeyefpv
    @oneeyefpv 2 года назад

    This is awesome. It's the Kiwico of drones :D

  • @markcloudchaser874
    @markcloudchaser874 2 года назад +1

    If I can save up the cash I would buy the full lot, goggles etc. Awesome 👍

  • @jumaiproduction
    @jumaiproduction 2 года назад

    As easy as it gets! Nice one! 👍🏼👍🏼👍🏼

  • @matt.explore
    @matt.explore 2 года назад

    This is great! As someone new to the hobby that's trying to build my first quad I can say soldering is already making me want to quit this hobby (and I absolutely love flying and never quit anything). No matter what I do I cannot solder the negative battery lead to the ESC pad. Might sell all my parts and get this to be honest.

    • @dangerous8333
      @dangerous8333 2 года назад +1

      You should still learn to solder. You may still need it. Unless you're planning to use the DJI controller you're going to have to solder in your own.

    • @matt.explore
      @matt.explore 2 года назад

      @@dangerous8333 i learnt :) and i built my first quad! i figured out the reason why i couldn’t solder was the solder i was using was awful, so i got some new solder and all my issues were fixed

  • @rosco4659
    @rosco4659 2 года назад

    Learn to solder and love it when you do a quality job. In no time at all you can easily be good enough at soldering. My neighbour taught me to solder when I was a kid and it's one of the best skills I have. If only I could fly as good as I can solder. Great video, keep it up!

    • @SilverFox80521
      @SilverFox80521 2 года назад +1

      But imagine you drove a ways to a cool spot. You don’t have all day. You crash on the first battery and bend a motor shaft. Would you rather solder a new one on right there or plug a new one in. It’s not just for people who can’t solder. It’s very convenient.

  • @FrapoDingo
    @FrapoDingo 2 года назад +1

    Hey thanks for the video ! i have a question , can i bind my phantom 4 pro v2 controller with the dji air unit ?
    thanks !!

    • @willpowerfpv3246
      @willpowerfpv3246 2 года назад +1

      Only the dji v1 (black square) radio binds to the airunit/vista(air unit lite)

  • @SloogusFPV
    @SloogusFPV 2 года назад +1

    Is there an analog version? I looked on the website and I only saw digital as an option

  • @apriliajo5030
    @apriliajo5030 2 года назад

    I seen the Josh/Ken video on this and it interest me for my first FPV. The first FPV part I have is the RadioMaster TX16S with TBS Crossfire. Can I get one of those sets with TBS Crossfire, GPS and Digital?

  • @jandomingo9806
    @jandomingo9806 2 года назад

    Thats a sick kit! Where was it 5yrs ago when i started 🤣

  • @roydenfpv
    @roydenfpv 2 года назад

    Good job onboarding the new pilots! Our hobby relies on them.

  • @julitovlogiando
    @julitovlogiando 2 года назад

    THIS IS THE FUTURE!!!!! THANK YOU I HATE SOLDERING,...

  • @OneOfTheRobs
    @OneOfTheRobs 2 года назад

    14:30 what the hell happend to lens of the Air-Unit ?? Is the protective foil still on there or is it all scratched 😀

  • @sergiondeeforever
    @sergiondeeforever 2 года назад

    great video! never seen anything like before thats something neww now ! nice!

  • @ronboFPV
    @ronboFPV Год назад

    very Nice build where is the RX radio at?

  • @WrongWayFPV
    @WrongWayFPV 2 года назад +2

    Excellent design and concept.. where was this 5 yrs ago lol? Would have saved me a lot of money when I was learning how to solder.. killed so many FCs in the beginning 🤣😂.

    • @RotorRiot
      @RotorRiot  2 года назад +4

      Yup, most of us had that same experience. We’re proud that we are finally offering this now. And hopefully we can save future generations of FPV pilots the headaches and stress that you and I had to go through haha
      - Drew

    • @PacketFPV
      @PacketFPV 2 года назад

      I'll admit to having smoked at least 3-4 flight controllers in my day because I just didn't know any better at the time. I don't think there's anything more demoralizing than seeing the magic blue smoke exit your flight controller after working on it for 12 hours straight an being soo hyped about being able to afford to fly, then all your hopes an dreams dashed in a shower of sparks an smoke.

  • @victorbarajas4705
    @victorbarajas4705 2 года назад

    22:00 did the mounts on that gopro brake?

  • @RCRitterFPV
    @RCRitterFPV 2 года назад +1

    makes total sense.

  • @smboy86
    @smboy86 2 года назад +1

    와.. 어떻게 뒤로 옆으로 날 수가 있는지 ... so amazing flight

  • @Gundercycle
    @Gundercycle 2 года назад

    This is really awesome. It’s a shame the motors are only 3-5s rated though. Will there be a lower KV motor available in the future? If so I’m def buying

  • @bbblllaaaj
    @bbblllaaaj 2 года назад +2

    Any chance you guys gonna ship these with crossfire nano pre soldered? Lol not everyone likes the dji controller. (Obviously)

    • @RotorRiot
      @RotorRiot  2 года назад +4

      We can do that for you. Email support@rotorriot.com

    • @jimbalo74
      @jimbalo74 2 года назад

      @@RotorRiot or ELRS would be nice also

  • @robertfazekas4607
    @robertfazekas4607 2 года назад

    Nicely done!! But I love soldering 😁 And I love the smell of it. I know is not healthy.

  • @zeeb696
    @zeeb696 2 года назад

    Great idea! Needs no receiver?

  • @katchakdroneservices4805
    @katchakdroneservices4805 2 года назад +1

    Sounds promising. I guess that the next logical step is to create a domino style universal connector for the motor wires. Each wire would be secured by a small screw and it could allow to choose whatever motor.

    • @Clynikal
      @Clynikal 2 года назад

      Or a spring/caged ferrule

  • @xnoux1
    @xnoux1 2 года назад

    Very good value proposition, congrats :)

  • @ironbeagle1610
    @ironbeagle1610 2 года назад +1

    how would I make this but for an analog setup? im trying to start out but dont want to spend twice the cost of my drone on goggles and a radio.

  • @lalojr76ify
    @lalojr76ify Год назад

    I’ve seen a lot of your videos and they’re great. Any suggestions for a newbie looking to get into FPV flying. Don’t want to break the bank because I just purchased the Mini 4 pro about a month ago and I want to go faster! Also all the beta flight computer stuff looks confusing. Any advice would be greatly appreciated.

  • @chrissmith7688
    @chrissmith7688 2 года назад

    First off love your videos I’ve learned a ton. I’m now learning that I need a better drone for freestyle. I like the no soldering idea but the link didn’t work. Also can I connect this to my DJI FPV radio like the one your girlfriend has not the black one you used in this video

  • @immortalbigd4122
    @immortalbigd4122 2 года назад

    love the video i did try to build a FPV Drone on my own and soldering are on the right arm still on the shelf my question can i buy the parts and put it together with my Frame which is a IFlight TITAN DC5 "5" FPV Frame for the DJI Air Unit and the battery are GNB 1800mah 4s 130oc Lipo Battery and thank you and i have the version 1 googles with control too.

  • @AponeFPV
    @AponeFPV 2 года назад

    Great video Drew, One thing you missed, When do I pick an fpv name ?

  • @aklimitless9072
    @aklimitless9072 2 года назад

    Did that action camera mount just brake that easy?

  • @christopherlenahan3906
    @christopherlenahan3906 2 года назад

    Are the screws aluminum? If they are steel and you switched them for titanium would that make a noticeable performance difference?

  • @KatanaFPV
    @KatanaFPV 2 года назад

    I have a DJI FPV drone (with the v2 goggles, etc)
    someone mentioned that I'd need V1 goggles? couldn't I just use the gear I have now with this build?
    Thanks!

  • @Xray-Romeo
    @Xray-Romeo 2 года назад +1

    When is the cheaper analog version coming out?

  • @Consti77
    @Consti77 2 года назад

    This is really a great idea.

  • @aBeekeepersLife
    @aBeekeepersLife 2 года назад

    Are there any distributors for this in the EU? The customs cost could be very high otherwise. Great video!