Ford 5.4L Triton - Everything You NEED to Know!
HTML-код
- Опубликовано: 28 ноя 2022
- In this video, Jake covers common problems and reliability for Ford’s 5.4 Triton V8 engine. He goes over the engine’s background, performance specs, common problems, reliability, and more. There is an article linked below, written by us, that covers more than just common problems: tuningpro.co/ultimate-ford-5-...
8020 Media Website:
8020media.co/
Check Out Our Portfolio:
Tuning Pro - tuningpro.co/
BMW Tuning - bmwtuning.co/
Diesel IQ - dieseliq.com/
Chevy Trucks - chevytrucks.org/
Volkswagen Tuning - vwtuning.co/
Porsche Mania - porsche-mania.com/
Muscle Car Club - musclecarclub.com/
New Videos Every Week. Subscribe so you don't miss a video!
►Subscribe Here: bit.ly/3xtNUph
---------------------------------------------------------------------
What is 8020 Media?
8020 Media owns and operates a portfolio of content websites and eCommerce stores in the Automotive industry. We provide over a million monthly readers with high-quality automotive content, focused predominantly on technical and performance modification guides.
---------------------------------------------------------------------
00:43 - Ford 5.4 Triton Background & Specs
01:36 - 5.4 Triton Common Problem #1 - Spark Plugs
03:06 - 5.4 Triton Common Problem #2 - Fuel Pump Driver Module
04:04 - 5.4 Triton Common Problem #3 - Timing Chain
06:11 - 5.4 Triton Common Problem #4 - Oil Pan Gasket
07:01 - Ford 5.4 Triton Reliability - Авто/Мото
The two valve Triton is considered the best engine Ford ever produced, followed immediately by the worst engine Ford ever produced... The three valve Triton.
2v is definitely a bit more reliable.
People just don't know the difference.
I would rather change out the timing chain set instead of replace/machine heads because a plug blew out. The timing chain is right in the front of the engine and easy to relatively easy to replace.....compared with cylinder head work.
@scotishpopcorn Replace or machine the heads🤣🤣🤣 You just tap new threads, there are kits for it and it's not hard at all. And once that chain on the 3 valve makes noise, the damage is done. And then when the plugs get stuck in the 3 valve, it's nasty, even with the kits they make for that.
S - Thanks for sharing this insight.
I've had my 2007 F-150 FX4 since I bought it new. I have 117,000 miles on it. I did have the notorious spark plugs changed but that's it. I do synthetic 5-30 Pennzoil (6) quarts then (1) Synthetic Kicks Oil stabalizer. It runs quip and smooth like the first day. Love my truck.
D - Thanks for taking the time to share your experience! Sounds like you take great care of it.
2004 f150 304,411 miles on it. Nothing done to it except regular oil changes and a new transmission at 234k I love it.
E - Thanks for taking the time to share your experience!
My GF had a 2002 Expedition with the 2v. Except for a oil pressure sending unit it was a reliable engine. I acquired it from her with 150k miles on it and drove it for another 50k miles and it was still going strong. Sold it in 2017 as it was starting to have some problems and I wanted to get a car which was a little smaller and got better gas mileage. As a whole I had a positive experience with it.
C - Thanks for taking the time to share your experience!
I still have my ‘09 5.4 3V in a FX4 Luxury Edition S/crew which runs as quietly and reliably as the day I drove it off the lot well over 14 years ago. Proper maintenance seems to be the key at least with the later run 5.4 3V’s. I’ve only used Motorcraft parts and oil filters on it from day 1 and always used high quality motor oil changed regularly. Since 2009 my engine problems have been 1. a/c pump clutch went out (2013) 2. passenger side exhaust manifold bolt(s) broke (2018) 3. had to replace both VCT solenoids (2022). Also just normal maintenance wise I’ve replaced the plugs, brakes/rotors and also fuel injectors and all new idler pulleys/ belt last year just because I thought it was a good idea. Additionally every fluid throughout the truck has been changed out twice now using Amsoil. I haven’t messed with the truck, it’s completely stock except for a MBRP car back exhaust. I just did a long multi day road trip and averaged slightly over 20 mpg or 11.6 l/100 kms with the 5.4. I’ll take that fuel economy any day on a V-8 full size truck.
Squan - Thanks for taking the time to share your experience! How many miles do you have on it?
Got the same truck its got 1090,00 an runs great an still looms like the day I got it from the old man an lady I bought it from
Best engine ever. I have a 2010 5.4L with 216,000 miles on it and she's still kicking. Yes 216,000 miles. I'm going to try to stretch it to 300,000. Frequent oil changes. New timing chains, Phasers and guides.
T - Nice! Thanks for sharing your experience. We've seen many 5.4's past 300k.
I've owned 2 2005 5.4 3v and 2 2010 5.4 3v. The 2005s one was sold with 240k miles and the new owner still no issues. The other had VCT solenoids problems, but it was only because the person we sold it to could not afford Motor Craft parts.
First 2010 5.4 3v bought with 190k miles and sold at 220k miles. No issues.
Second 2010 5.4 3v bought at 50k miles and still currently driving.
I always use Shell Gasoline.
Always use Shell Rotella Gas Truck (Red Bottle) Engine oil changed at 5k
Always use Motor Craft parts
The 5.4 3v like all other engines will have lemons and failures.
But I am confident that with high quality maintenance and parts, your issues would never be out of the ordinary.
Thanks for the insights and first hand experience. Proper maintenance and quality parts/fuel/oil goes a long way.
I’ve had the same experience you describe by properly maintaining the 5.4 with high quality fluids and using Motorcraft parts only.
I have the 5.4 3v..I did the timing job. Phasers, chain, guides, tensioner, oil pump, and all rollers. Water pump because I was in there. I also did the spark plugs. .110k miles. It's runs strong. Looking forward to another 100k.
T - Nice! We've seen many great 5.4's. Thanks for sharing your experience.
This engine does have timing issues, however, Ford has addressed those issues with updated parts that will no only fix the timing issues, but makes for one very reliable engine. Mine is a 2008 with 202000 with all new timing components installed and the engine is super quiet now
J - Thanks for sharing your experience and insights! Sounds like you take great care of it.
I’m experiencing this with my 2008 right now at 127k miles. What did it cost you to fix it?
@@8020Media it was my Dads and he did oil changes every 5k with full synthetic. Now I’m just keeping the beast alive hah
Good video
PB - Thanks for the feedback. We hope it helped!
I've seen the 3v engines with over 300k miles. You have to stay on top of the oil changes, though. I change the oil in my 2012 Expedition every 2500 miles with Motorcraft 5w30 full synthetic and a Motorcraft filter. I only drive it 5k miles a year.
I - Thanks for sharing your feedback and great insight!
Yeah Motor craft oil an change maps the key an it will run forever
You should have gone further to identify the culprit of the timing chain issues. The plastic tensioners with the angel hair pasta sized gasket that blows out and releases all tension when the motor is off. This causes the chains to slap and break the guides and gouge the timing cover. Cast iron tensioners will solve that problem permanently. Might as well install a Melling hi-po oil pump with the new timing set. NGK COP's and Iridium plugs work wonders on this engine.
A - Thanks for taking the time to share these insights!
I've got a 2v 5.4 triton in my 2000 Eddie Bauer expedition. bought it used and have no clue if the spark plug issue has been addressed, but I've had it for a few years now and it has 315k miles on it with no issues. so I can't complain. 😂
L - Thanks for sharing your experience! Sounds like you take great care of it.
Great info and u explained it great thxs, when i start engine i hear rattling noise at front for 1 second when i start it but absolutley nothing when running very smooth so not sure what could be timming chain loose not sure
J - Thanks for the feedback! It sounds like it could be timing chain rattle. How many miles do you have?
@@8020Media 230000 kms
Got a misfire,was a spark plug. Changed them out and the ignition coils and then it was worse then before engine would bounce a lot during stops and in park? A day later the spark plug blew and melted had to go change them out again and the shop I took my Ford f150 2007 triton to said it's the fuel injector have you heard this working?
It's possible it's the injectors - sometimes swapping fresh plugs and coils in can unmask other problems. For example, a leaking injector might not cause misfires or pre-detonation with an old weak plug but then will once you put a fresh one in.
Are the misfires specific to 1 cylinder or are you getting them on multiple? If it's just one then an injector might be the issue. If it is more than one cylinder then it could be something else like the ICM.
01:36 - 5.4 Triton Common Problem #1 - Spark Plugs
The spark plugs are supposed to be changed with a warm engine.
Thanks for the tip - we've seen this recommended numerous times to prevent issues with them breaking.
Awsome
On the 2 valve, if you install the OEM Ford plugs dry at 25 lb. torque, they will never blow out. The problem was that the plugs were installed too loose. Exhaust gases build up on the threads and eventually the plugs work there way out. There is no reason why the timing chains won't last at least 150K with regular oil changes.
Using some antiseize will help too. Regular oil changes and proper maintenance is definitely the key here, it always goes a long way in added reliability.
@@8020Media Ford does not recommend anti seize for their spark plugs. The plugs are already nickel coated to prevent adhesion.
Over tightening the plugs can fatigue the threads, allowing them to bow out with the threads. It is similar to tightening a bolt enough to strip the threads.
@@carlanderson7091 Not. Ford recommends now 23-25. Heads cannot be "fatigued". If that were the case no fasteners would last. 25 lbs is quite low in the torque spectrum. Under torquing the spark plugs is the problem.
I have a 2008 F150 5.4L V8, and I had to get the spark plugs replaced at 115k miles. There was a misfire which I mistook for a transmission slipping.
However, the issue now is the ticking coming from the engine before it warms up. It just costs too much to fix it. Labor in WA state is expensive.
K - Sorry to hear this.. However, thanks for taking the time to share your experience.
@@8020Media No problem. These issues weren't as well documented when we got the truck in 2008. I appreciate your video!
K Thanks for the feedback!
No matter what Triton, it'll last longer than any bimmer.
Lol maybe valid but not a very reasonable comparison considering BMW doesn't make trucks, nor anything that competes with BMW in terms of performance.
@8020Media They make SUVs. And a Raptor and an x3 m40i have similar power and interior volume.
G - Ok.
@@8020Media Nice.
I’d take the 5.4 3v over the Hemi with its lifter/cam issues any day
That’s a good point! We think both engines are solid.
Lmao not even close the hemi is way better as long as you aren't a ape that doesn't change the oil on time
04:04 - 5.4 Triton Common Problem #3 - Timing Chain
The early years of the 3v were really noisy, that's just how it is. If you have that noise and your performance changes, then yes, take a look. But the timing chain issue can be solved with high quality engine oil changed religiously.
The best 3v would be 2009-2010
Yepp, biggest threat to the timing chain (on just about any vehicle) is low quality or old and dirty oil. Frequent oil changes really are the biggest reliability factor.
Seems like every one of these Triton engines that roll in my shop is not running correctly, has major mechanical issues, and needs a long block,got a 4.6 in now has zero compression on cylinders 3-5 at 100k miles?
B - Wow, good to know. Thanks for sharing your experience!
I beg to differ in the 4.6. It's well known as a legendary engine, alot like the older 302 and 351 Windsor engines from before, by reputation. Engines aren't perfect, and will have problems here and there. You work at a repair shop where, surprise, you fix things. So, EVERY vehicle that arrives there is there for a repair of one sort or another.
I have an 2004 5.4 triton and it idles when in park or stopped. Changed the plugs. What else could it be?
Big - Don't quite understand the question here.
@@8020Media when I’m in park, my truck is shaking but when I accelerate it stops.
vct / solined u hope@@BigGonzo23
@@BigGonzo23 did you found the reason? Mine is the same
@@alzaraza transmission slipping.
i have a 2008 5.4L f150 fx4 off road i just got right before i got my temps it has 141,047 miles, i have taken care of the spark plugs but i am concerned about the timing chain it has a very quit ticking noise near the front of the engine it sounds like it might be the timing chain but its too quiet i think do u have any other ways that i can tell if it’s the timing chain that’s going bad? my local shop said it’s 1500 just to check it so im not trying to actually have someone check it
D - Are you having any drivability issues?
@@8020Media not really there is a weird delay in acceleration once it’s past like 60 but other than that no
D - It's possible.. but not worth $1,500.
@@8020Media should i try checking it myself or would that be to risky?
D - You could try to call other shops around to see what they're quoting? It's not really the easiest thing to check for.
if you do a few upgrades its a really good engine... run 5-30 oil not 5-20, install the melling high volume oil pump, provides 25% more oil volume , install the new style cam followers ,.. and always use Ford OEM parts.....
J - We completely agree. Thanks for adding this insight.
Econoline got the 5.4 but only the 2 valve.... I did have a blow out with a spark plug but there all sleeved now no more blow outs.....
A - Thanks for sharing your experience!
Great engine if you maintain it.
M - Nailed it.
I heard, issues were perfected for 09 & 10,
B - They were definitely updated, but perfected might be a stretch.
It’s a great engine when maintained
S - Very true!
The 5.4 i have worked is the easyest v-8 engine to time out their. i use 15-40 oil with cast iron tensoniers, runs like a ape.
G - Thanks for sharing your experience!
What about the passenger head gaskets leaking oil at the firewall end of the head on the 2 valve?
Guts say the robot milled the head wrong back there.
Mine does it presently
My 4.6 has 460k miles i change the oil to 15 40
Nokia - Nice! That's pretty impressive. Thanks for sharing your experience.
The Best way to correct this issue is to install an inline six engine from a Chevrolet.
E - Lol. This engine is solid..
This is completely wrong. Spark blow out doesn't happen if the plugs are properly torqued to 20-25lbs. It's not an expensive fix if it does happen. The 2 valve doesn't have timing change problems if you just change your oil on a regular basis. They can last at least 150k. Most likely more.
Well assuming most owners properly torque their plugs and change their oil every 5,000 miles is probably optimistic. Not to say that these things still can't and don't happen to meticulously cared for vehicles.
183 thousand on mine.
I wouldn't buy a used Ford truck with a 5.4 engine. I had a used 02 4.6 ford truck. The catalytic converter got stolen twice, and replaced the fuel pump. Then the transmission went bad. No more.
C - Sorry to hear about this. However, thanks for taking the time to share your experience.
@@8020Media Thanks, I appreciate it.
It's juck!!!⚓
Two valve, three valve, or four valve...which one are you talking about? You're talking about the three valve You're totally right it's dog shit, but the two valve... it's amazing. I'm working on the spark plug sleeve fix right now and that's the only problem I have ever had.
Barbwire - Curious as to why you’re saying this.
You’re juck!!!!
I dont care i plan on rebuilding my 5.4 putting high quality performance parts replacements for damn near everything and watch my 5.4 become a beast
B - Sounds like a great plan! Keep us updated. Curious to see what mod you put in it!
@@8020Media this is my current list from my first to do and so on
1. Comp Cams Mutha Thumpr NSR 234/254 Hydraulic Roller Camshafts
2.Manley® - Domestic Platinum Series Piston
3.Ford Performance Cam Covers
4.dual BDS STEERING STABILIZERS
5.Flowmaster 1-5/8-Inch Scavenger Series Elite Shorty Headers
6. Flowmaster Outlaw Dual Exhaust System; Side/Rear Exit
7. Ford performance spark plug set
8.MSD Ford Blaster Coil-on-Plug Ignition Coil Packs 82438
9.buckstop F7 BAJA front bumbper w/ winch tow hooks
10.frontier 100-10-4009 diamond ford rear bumper
11.high output alternator 400amps 6 phase hairpin red powder coating
12. Msd performance starter
13. Duralast solenoid switch ss940
14. Whipple supercharger intercooled turner kit
This is what i have on my to do list so far
I do not know much about trucks this is my first ever vehicle at 38 years old in 2006 my vehicle was hit by a VBID in Baghdad Iraq took me 9 months to relearn to walk and talk i had a seizure and the army took my license until about 3 months ago so my mother purchased this 2005 f150 as a congradulations on my rehabilitation.
So if anybody is willing to give a disabled veteran any advice ima be posting videos of my truck i call her BIG SHIRLEY named after my late grandmother whos money actually purchased the truck i appreciate any advice anyone can give.
What my build should focus on is being loud mean sounding and able to drive through creeks and off road to do some family camping with my young son
I gotta 5.4 too it’s my first pickup ,just changed the spark plugs and changed the oil filter,any tips ?
@@tirqaroni1andonly timing chain and phasers are alwas an issue with the 05 5.4 so get that done and also a new coil pack and your gonna hear a change in her that youll love.. also change oil 500 miles early and she will run forever
I have a 2011 Ford Expedition with 250k and still runs well. I only use full synthetic 5W20 and change every 5-6k. These motors after 2009 seem to last longer with fewer issues. Maintenance I think is the biggest factor of longevity and reliability. I've had several for work duty and they've lasted past 150k with no main issues before being traded in. Exhaust manifold studs breaking and paint issues with the aluminum/steel combination body panals that show corrosion and eventually rot in poor climates. Sometimes the IWE system can malfunction causing them having to be replaced. But that's the trucks not the motors which as I said have had little issues when maintained properly.
M - Thanks for taking the time to share your experience. This will certainly help future viewers!