Good question I haven’t measured them but I do have a 20ft roll of PTFE fuel line which I think I will only use a lil over half of that if I had to guess 6-7 feet
I'm way past all this, i just came to see what you were up to for 💩😂's. I started out just like this. It worked, Well I went through three of those fuel pumps before i changed to Aeromotive. Now it's all in a box somewhere hiding from the mud dobbers. Besides the terminator, this is the ( just enough, it will work) Approach, Besides the terminator. Which you don't need, if you're going B minimum everything else. I'm not breaking anybody's balls, like I said I did the same thing and learned. Well kinda, I did it this way because I couldn't afford to do it right all at once. Which means in the long run. It costs you more. Like buying a custom car That someone spent eighty thousand dollars to build, for 30 grand At barrett jackson. It is what it is. You buy the training wheels and then you throw them away. 🤙
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Good to see you back!!!
Nice to be back thank you for watching bro 💯
What size is the fuel pressure sensor?
It’s a lowdollar motorsports pressure transducer 0-100 PSI 1/8 npt
How long are the lines. I rather make them that long. Then the other RUclipsr I saw. He had each one running 2ft
Good question I haven’t measured them but I do have a 20ft roll of PTFE fuel line which I think I will only use a lil over half of that if I had to guess 6-7 feet
14:36 I meant these. Should have specified myself
@@DaBundle I see they are 4.5 inch PTFE fuel line with fittings 5.5 inches very small but it works
Did you use 8 an or 10 an for your fuel line to an fittings? so ik what ptfe hose to run
an6 fittings and an6 PTFE line
Are you going to run yours like factory or off the ok pressure switch to turn on the pump?
It gunna be like a shock truck fuel pump powered by the key
What oil pressure switch did you use?
Low dollar motorsports
I'm way past all this, i just came to see what you were up to for 💩😂's. I started out just like this. It worked, Well I went through three of those fuel pumps before i changed to Aeromotive. Now it's all in a box somewhere hiding from the mud dobbers. Besides the terminator, this is the ( just enough, it will work) Approach, Besides the terminator. Which you don't need, if you're going B minimum everything else. I'm not breaking anybody's balls, like I said I did the same thing and learned. Well kinda, I did it this way because I couldn't afford to do it right all at once. Which means in the long run.
It costs you more. Like buying a custom car That someone spent eighty thousand dollars to build, for 30 grand At barrett jackson. It is what it is. You buy the training wheels and then you throw them away. 🤙
Thank you for watching I appreciate the comment