Huge Upgrade HP Victus 15L Gaming PC TG02 Water Cooling! AlphaCool AIO install 20°C Drop
HTML-код
- Опубликовано: 11 апр 2022
- Cool down your HP Victus 15L Gaming PC with an AIO! In this video I show you how to remove & install a AIO CPU Cooler in this gaming pc.
💾💽💾💽
AlphaCool Eisbaer LT92 92Mm AIO
Eisbaer LT92 DataSheet: bit.ly/3v9nNST
🧊🧊❄️AIO Used in Video❄️🧊🧊
AlphaCool Eisbaer LT92 92Mm AIO
Amazon: amzn.to/3E5wlyg
AlphaCool Eisbaer LT92 92Mm AIO
Titan Rig: bit.ly/37FNe6s
AlphaCool Eisbaer LT92 92Mm AIO
PPC PC: bit.ly/3uugeqA
AlphaCool Eisbaer LT92 92Mm AIO
AlphaCool: bit.ly/3xkfUMQ
🌡️🌡️🌡️Thermal Paste🌡️🌡️🌡️
Cooler Master High Performance Thermal Paste
Amazon: amzn.to/3CljyFGAs
Cooler Master MasterGel Pro V2 High Performance Thermal Compound
Amazon: amzn.to/3kkcYJt
🍃🍃🍃Fans🍃🍃🍃
Case Fans 92mm
Noctua NF-A9 PWM, Premium Quiet Fan, 4-Pin 2000RPM (92MM)
Amazon: amzn.to/3ziooBt
Noctua NF-B9 redux-1600 PWM, High Performance Cooling Fan, 4-Pin 1600RPM (92MM)
Amazon: amzn.to/3hLLdYC
Noctua NF-A9x14 PWM, Premium Quiet Fan, 4-Pin (92x14mm, Brown)
Amazon: amzn.to/3LM9Vah
ID-COOLING TF-9215 ARGB Case Fan 15mm Thickness PWM Fan
Amazon: amzn.to/48DDMvd
⚒️⛏️🔨TOOLS⚒️⛏️🔨
iFixit Mako Driver Kit - 64 Precision Bits for Electronics Repair
Amazon: amzn.to/3Cnt76T
DISCLAIMER: This Video Description & Video contains affiliate links, which means that if you click on one of the product links, I'll receive a small commission. FYI The Links below or Above are to Amazon affiliate account and are Paid links. As an Amazon Associate I earn from qualifying purchases. 
Наука
Guide for morons cuz I know I needed one: FYI this is for the ERICA8 mobo AKA the Ryzen model (Look up how to check this)
Step 1: Make sure your Bios version is up to date (f.20) (I had to update mine I was on f.11) (Look up how to check this and or update your HP bios)
Step 2: Screw fan to big part of cooler (Watch video for that)
Step 3: Grab the AIO pump and the intel brackets and put them on each side. (It must be the intel one even on the Ryzen version)
Step 4: Grab 4 of the AMD screw type and slide a spring up from the bottom to the top, then put a 0.5 mm washer under the spring, and then the 2mm washer under the 0.5mm washer, then you need to drop that into one of the holes of the AIO bracket, and grab the nut and slide it up the BOTTOM of the screw (Under the AIO) and screw until tight. then do this with all 4 screws
Step 5: Clean CPU and clean the part of the AIO pump that covers the CPU, (Make sure to remove plastic)
Step 6: Put thermal paste on CPU and screw down the AIO (MAKE SURE IT FACES THE DIRECTION AS IN THE VIDEO)
Some more bs: download.alphacool.com/legacy/Eisbaer_LT.pdf
Thats all I can think of. This was such a pain in my ass to do.
But it cools the crap out of the PC happy you did the upgrade,.
@@TNW1337 thx for the pin. This was just such a pain that I thought I might as well try to help someone else if they’re struggling.
did you guys install the backplate? i didn't see it in the video but see it in the install instructions@@CodinPenguin
Thank you for the video! was able to get the parts and upgrade my HP Victus with no hassle.
thank you for the vid man ive been wondering if this could be done. i literally switched to pc because of you and appreciate the knowledge!
Awesome man I am happy I got you in to The master race! Jk I love all gaming to be honest.
That is a surprising result, great idea!
I am happy they make this!
WOW! Awesome to know! Thanks for these videos!
As always!
I just added this my Victus! So far so good! Thanks for the awesome content!
Glad you enjoy it!
Thank you for making vids on 15L , I doubt it but maybe they will make a clear side panel to deck out the budget tower
Wow. I don't know anything about computer building and I was able to install this in my 15L. Thanks @TechNitWit !!!! Couldn't have done it without you!
how... My pc won't boot. What did you do after screwing it down to the mobo.
Could you please do a full upgrade video like you did with the pavilion? That would be really cool and informative!
yes it is planed
Thanks I’m planning to buy the one with the 3060 and I’ll probably try and upgrade the cooling like how you did
it is worth it.,
Great video ! If I would like to replace the stock CPU fan with a Noctua, would that be model Noctua NH-L9x65 (on same computer hp victus 15l Desktop) ?
Hi! Cool video I have only some questions. 1) Is this for socket LGA 1700 right? 2)Here in Italy I can't find this aio, there are some alternatives?
I have just bought this AIO through your recommendation and it is awesome in my HP TE01. Also upgraded to a Zotec RTX 3070 dual fan also on your recommendation and the TE01 is now running like a beast!
I didn’t get the HP blue error screen at when you turned on the PC. However, unless I’m missing something, it looked like you got the power for the Noctura and the CPU cooler the wrong way round. It’s been over a decade since I last upgraded a PC having been an apple fanboy during that time, so let me know if there is a reason for those two power cables to be the other way around.
Thanks for the great vids, they’ve been super helpful!
When I try it the other way around it gave me the error. But after ruining it for 3 or 4 days the error stooped So I am not sure what causes it. But both ways work.
thx 4 this video….i have a ryzen 5 5600g an the temps under prime95 stressing are 82 with the noctuas from the video…is this good go???
Nice. Useful information.
THanks!
Great video, thanks!
The Victus, when strained, sounds like a rocket taking off. Did you observe any changes with the new setup?
it is not as loud.
Can You use a different 92 mil liquid cooler because I also would like some rgb
Hello I just this PC and was thinking of installing the Thermalright Assassin X 90 SE CPU Air Cooler into it. Would this be a good air cooler unit for it? 🤔
Sir can I use only coolmaster fan hope there will be no issues I feel
I wasn't able to find the full kit for the AlphaCool 92 mm -- does buying the water block/pump solo and then the ~60mm thick single radiator work? Just trying to figure out how to best upgrade the cooling for my HP Victus.
What's the biggest Intel processor you can put in the Reno 2?
Cooler worked awesome. I have the Ryzen 5 and 3060ti version of this pc. The Mobo takes the Intel bracket only. Using the supplied AMD mounting bracket that's included with the cooler does not line up.
Note to people with the AMD card. Use the Intel mounting bracket on the cooler.
Great video!
Oh did I forget to say that, with having all these different PC i do, I some times miss stuff like that. thanks for pointing it out!
@@TNW1337 oh absolutely. I knew you had the Intel version. So just wasn't sure if you were aware. Using the supplied thermal paste. Idle is 44°c, Low was 38° No load and full fan. And my high was 72° c full load and Full Fan.
Great Video man.
@@TNW1337 This alphacool cooler is not in stock anywhere (europe, netherlands.) You have an alternative cooler to replacec the stockcooler in this pc? (That is easy to pin on the cpu backplate as i cant seem to get the backplate of this mobo. Thanks!
Thanks for the heads up
My Ryzen 5 power supply is 350w stock. You upgraded PSU? Even to a 500w, you still dont have enough power to properly run the 3060ti @550w. How are you doing this?
Looks like this is out of stock everywhere. Is there an equivalent or better AIO cooler?
This AOI is overall sold out. What is an option too? I have the i7 12700F in the Victus 15l.
I noticed that vrm has no heatsink?is that fine? And this upgrade cost it to remove the vrm heatsink?
What’s the fps boost the new cpu gives?
Can you show how to remove the motherboard?
Hey i have a question, does the Noctua NH-L9x65 cpu Cooper Work and is compattable with the hp victus 15L?
I would like info on the newest 15L with 13th gen I7 and Nvidia gpu
nf-a9 and nf-a9x14 noctua, which of the 2 is better
How to change the computer case from 15L cuuz i think it's a bit hard
Hello, please can you tel me if, it is silent or not ? I want do this on my victus because it turn Very hot (i7 at ~90°C and rtx 3060 at 85°C when i play video games). Thanks for the answer ! :)
Worked for me on Victus 15L, 12400f! Thanks!
Awesome!
So this does work for intel CPUS?
Just got this installed on a M01-F2254, exact same chassis just a different motherboard and front panel. In case this is a help to anyone look at the M01-f2xxx series models instead of the victus 15l, takes a bit more upgrading to get to gaming spec but got it upgraded to a i5 12400 and rtx 3060 12gb for about the same cost as the victus from hp.
This series has the Akali1 motherboard which has PCIe gen 4, the victus 15L comes with a Reno2 motherboard which is only gen 3 PCIe slots. Not sure why but I’m seeing to this day HP still uses the older Reno motherboard in the Victus version
On a side note I didn’t get the no cooler detected warning. Set up is the same as yours, block is on the red 3 pin header. I also have a Noctua splitter attached to the cpu cooler 4pin header going to 2 92mm noctua fans front and back
Im having trouble putting in the ID-COOLING TF-9215 help?
ty for video 1 question is the aio going to be alright in that config sucking air wise
Yes helps cool the Pc down. And it really your olny option for mounting it.
Does this work with the intel CPU? I have the I7 model
Just bought that HP model 15L (costco 1250$) with intel 12 gen i7-12700F with nvidia rtx 3060TI and single stick 16 ram 3200 ,512 ssd but immediately noticed the heat issue thru my various software monitors plus a lot of fan cooling noise while Microsoft flight sim ( which works quite well with these specs) running. Your suggestion is just what I need, BUT CAN I USE A Y SPLITTER on the brown header so to manage running the heatsunk and original fan power needs (very tight and hot box) thanks
Yes
Hi, this video convinced me to get an AIO for my tg01, however does this affect the exhaust of the system in anyway (with side panel closed)?
Not at all just cools the pc better
I'm a little late to the party, but I have recently gotten the HP Victus 15L. AMD version. I appreciate the work you've put into the videos, they've been my go to when I tinker with my PC. This video has convinced me to upgrade to this cooling system. You didn't mention it in the video, but I am assuming the power supply is sufficient to run this cooling system?
Yes, the Psu can run this cooling system.
Hey thank you for your help. I upgraded the cpu and the 2. fan in the case with your advice👍🏼
Is it possible to upgrade the power supply? During gaming it is quite loud although there is a Gold plus certification and the most noise comes definetly from the 500W power supply fan. There is no ATX standard in the Mainboard. I found the name(Reno2) but have no idea, if there is another and better like from be quiet. Do you habe any ideas?
NO on the victus it HP only. you can buy noctua 92mm fans and they are not as loud.
From the Q&A section of HP: "This has a 500W PSU but can be upgraded if necessary."
This is sold out everywhere far as I can tell. Alternatives?
Is it worth it over a Xilence i402 air cooler and great thermal paste? I've installed this one in combination with a adding 2 intake fans of 92mm to create positive pressure in the case. I've got the 12700 and 3060ti build, running idle at 32 degrees, average under load at 58 with max temps staying just under 80? Similar cost (because of noctua fans) but no errors, would adding the aio improve things according to your perspective?
hey, I don't speak English well, I use Google translator, I hope you understand me, tell me where did you install the supply fans? front or side?
Great Video thank you very much for that! I habe a question: I bought the version of Victus 15L whigh has an rtx 3060ti and an i7 12700F. As the cinebench Test for the CPU got me max 94°C as well, I switched to the noctua NH-U9S CPU cooler and also switched the case-fan to an Noctua NF-A9 PWM. Now my max CPU temp lowered to 76°C which i'm fine with. But measuring via the tool "CPUID HWMonitor" my TMPIN0 now raises from 84°C befor, to 104°C in the new setup. I think it is because the box-cpu-cooler was horizontally and the new one is vertikal so the mainboard gets no more cooling. Could you measure it in your system as well please? Do you think the AlphaCool AIO would be a better solution for me? Thanks a lot in advanced! I cannot find any other helping toppings online.
Yes the alpha cool Aio would be the best. Because it would ship all the heat right out of the system. I use hardware Info. Some times CPUID has wired bugs with the temp sensor.
Hey men i also buyed the noctua cooler but what bracket did you use the am4 doenst fit for me
Is there enough clearance to put a traditional vertical cooler that just uses the stock backplate (instead of an AIO)
Yes and no 1st problem is the treads M3 Fine. The noctua coolers i show on the TG01 Will work 100% with this PC.
Thanks so much for this video--super helpful! I just purchased the HP Victus 15L TG02 with the Ryzen 7 5700G and the Radeon RX 6600 XT...I might not go with the AlphaCool liquid cooling. I might just replace the stock cpu cooler instead. It's my first time doing something like this.
Would the Noctua NH-U9S Premium CPU Cooler with NF-A9 92mm Fan work? This PC has an AM4 motherboard right? Thanks for any advice !
Hey! Does this work with the HP pavilion TG01 pc?
@@justinphomar Yes it will work with the TG01
@@doctube2020 Thank you!
yes it will work with the Victus.
I LOVE these videos, would love one with an i9 CPU and the most powerful GPU that'll fit. Or just info on which would work best and would fit in the case (GPU). Thanks for videos like these!
Welcome
Excellent video! Thank you so much. I got a I7-12700F / RTX3060Ti with 1TB, but just 16GB RAM. I'm planning to use it as a server running financial algos. Do you think I can upgrade to 64GB? I would think so, but would love to have a confirmation before I go through the trouble of ordering the RAM memory.
It may or may not work. Be prepend to have to return the ram.
I've gotten it to work, I will say you have 75% ?. if it does not work before sending it back, make sure to cheek hps site with you exact model number for a bios update.
It only supports up to 32gb of ram. It tells you that on the specs of your Victus 15l, if you bought it brand new, so you should have that info accessible to you.
Will this work in the TG01-2170m and is it better then the small noctua cpu cooler?
Thats what I will be testing next!
Hey man loved ur video,I have a question,can we case swap?
Yes
Any other cooler recommendations that would have the same installation for the 15 L ? As this seems to be out of stock. Thanks for the great video!
Look on alpha cools site if not the TG01 massive Noctua will fit in this PC.
About to get my i7/3060 12gb tomorrow. Can i use the nacturna fan as my exhaust fan replacement for now?
Yes
@TNW1337 Hi, do you think the push-pull 2 Fans Setup you do in your other aio video will work here? And its necessary for the 15l with i7-13700F? Thanks for your effort & inspration!
I have the same CPU and can't find much info about cooling. Did you install this aio on yours?
Okay so i got it installed and its hitting 170F is that bad?
Is the radiator positioned correctly with tubes on the bottom? Should tubes be on top? Will air get caught in the pump?
I do not think it will fit tube up. But as long as the block is below it does not matter it is a prefilled Seal system. And the amount. Of air is not going to be more or less.
Hi ! Very nice video sir! I have one question regarding HP pavilion tg01! Is just one year old and recently isn't starting at all! I just get 3 shorts and 3 long beeping and then nothing! I think my rtx 3060 is dead i try to replace it and I still don't get anything! Ani ideas what is wrong with it?
is it over 1 year if not Call HP asap so you can get it fixed for free. Does it still boot normally?
@@TNW1337 doesn't boot at all ,i get no signal ! It just beeps 3 times short and 3 long then nothing! I also try to replace the GPU but still same results ! Maybe is something with the motherboard?
@@mariusunsraw google it, just put the pc name in and what beeps its doing and it will tell you
What is the name of the screws I’m supposed to be using to tighten the AIO to the motherboard? What bag are they in and do you put washer then spring on the screw? Or vise versa
You need to order the screws from amazon I have them linked in the disco of the video.
Hi, I have the same pc but with an rtx 3060 and an i7 12th gen, and I was just wondering how can I lower GPU temperatures? I'm pretty worried about 78-85c in warzone (I don't want to buy another gpu with more fans) and maybe I can drill holes in the top of the PC to mount 3 fans with RGB to throw air to the whole PC? And if you have some recommendations like the fans, I would really appreciate it. Thanks!
500w 80plus gold psu btw
Use msi afterburner to set a more aggressive fan curve.
I got the victus i5 12400f and 3060ti, the gpu fans speed were maxing at around 55% at 83c
I set up this fan curve cdn.discordapp.com/attachments/772665560663982122/874001138515574814/unknown.png
And now it maxes out at 77°c.
Im thinking about buying it. Does it work with the victus 15L(Ryzon7 5700g and rtx 3060)?
Yes it will work
Also, do u need to do any updates after this is installed like in the bios or anything? HP is weird with compatibility.
Nope
Hi, i write again here after 8 months. I installed the 92mm alpha cool AIO, I also added a fan dropping air inside.
After long time of utilization i can say the situation is better but not that better. Playing BF1 or COD2 for example cpu 95 and gpu 82.
Ambient temp its 22, 23 so a common temp in house.
i also make a modification time ago, i added another fan outside the case, at the rear air outlet to help cold air to go off the case, plus a fan inside dropping in the air, but no noticeable difference.
Once i have disinstalled and reinstalled the AIO, except i miss something, it seems to be installed properly.
Thanks for any suggestion❤️
PS: the 3060ti with 2 fan its very loud, you can also reach the perfect silence for CPU but GPU cooling makes a huge amount of noise at 100% fans :(
PLEASE TELL ME HOW YOU SCREWED IT ABOVE THE CPU!
Can you put a 92mm fan on the black cage?
Sure
Would love to see this on the tg01 Pavilion.
Yes it is coming!
@@TNW1337 Hi is this AIO cooling system better or the one with the NOCTUA heatsink and fan on the back for my HP pavilion with the ryzen 7 5700g and 3060Ti?
So I for the life of me can not find this cooler in stock anywhere. Would a Asetek 645LT 92mm Performance Liquid CPU Cooler work in its place?
Yes, i buy it. It works 😺
What else can you guys recommend for Victus 15l? This seems perfect but is out of stock... Someone else has tried something similar? What brand/model? Thanks
Yeah I’m wanting to know the same. All the other SFF CPU AIOs I see are 157 x 120 x 30 mm.
I’ll go measure it out on my Victus 15L, but would like to here your opinion @TNW1337
I mean as long as there is room it should fit right? Maybe thread some new holes for the difference of a 120mm and 92mm fan?
I have the all AMD one, 5700G with 6600XT. Would I still need the cooler? I haven't done anything serious on it yet.
Well you don't NEED it. It just helps to cool temps. I'ma add this and a side intake fan.
I did this on my hp pavilion tg01-2027no and it is cooling pretty good but not as good as expected. Is it mabye becuase i used alpha cool thermalpaste and not the cooler master v2 thermal paste?
By the way have I orderd the coolermaster thermal paste too but it has not arrived yet.
Yes the alpha cool paste is so/so. Some times id get good test results with it, other times it would be junk. make sure the screws are all the way tight, you may need to add the washer to get more pursuer on the heat sink.
@@TNW1337 Hey how did you apply the screws?
Will i need to worry about liquid going everywhere im kinda new to water cooled coolers
Nope, But even if it does it is none conductive
I’m using the stock case fan. Can the original fan go into the brown connector on the motherboard, while the CPU cooler fans be connected to the original cpu fan connections on the motherboard? Not sure why you had it the other way around.
Well if your ruining the aio I I wanted the pump to be primary
@@TNW1337 That makes sense. I looked up the manual online (my kit didn't come with it, for some reason). The manual really helped with a few questions I had after watching your video, and made things a lot clearer. Can you include a link to the manual under the data sheet, in the video description? I'm sure that others will find it helpful, too! Thanks!
I'm having an issue trying to gets the screws for the CPU cooler to the motherboard. Any suggestions or something I missed?
Intel or Ryzen?
hey I was struggling to take the side panel off 😂
Hee man, thanks for the video. I tried to replace the cooler with 2 other air coolers, but both times i need to replace to backplate on the motherboard, which is not able to get apart from the board.
Can you suggest an aircooler that DOES fit to the setup like this watercooler does? Thanks!
I have the I7 3060ti setup of the victus btw
No problem 👍 This is why I use noctua. you can get the back plate off if you take your time and use plastic pry bars.
Cool
Hoi toertje1991, ik zit eraan te denken om ook zo'n pc te kopen maar lees veel reacties dat de temperatuur erg hoog kan worden. Wat is je ervaring met de pc? Een aanrader? En hoe is het afgelopen met het koelsysteem? Ben je er tevreden over? Veel vragen ik weet het 😅 maar ik hoop dat je me op weg kunt helpen
@@kjeldbergsma het klopt dat de pc warm wordt in huidige staat. Met het nieuwe coolsysteem (welke overigens makkelijk te installeren is) en een extra fan, zijn temperaturen stukken beter. (45 passief en tijdens gamen 75). Hij is ook een stuk stiller met de nieuwe cooler. Als je m dus aanschaft, is het zeker aan te raden de cooler erbij te kopen. Ik vind de pc een goede investering, je krijgt best wat voor de prijs.
Is there any way of upgrading the power supply
Has to be the 500W from HP if they still make them. Anything else would need a pwrswitch adapter and 8 pin adapter, not to mention a different bolt pattern for the rear.
I have the2024 model I7 13700 and I don't have any cooling problems as is.
Depends on a lot of factors you Climate also depends on what applications you're using. There's a lot of games that barely use ten to Twenty percent of the c p u
What RAM and SSD are compatible with the HP Victus 15L
Any 3200MHz 1.2 volt ram and Samsung SSD is the brand I would get.
Heyyy. They're all out of stock, any other alternatives?? Thanks!!
Google it, There are other stores that have the cooler.
hi I have an hp pavilion tg01-2136nl and the temperatures of the gpu and cpu are really high, what do you advise me to do to solve the problem? AIO?
Get a Noctua cooler or aio. Depends on what you want to spend.
@@TNW1337 i dont have a budget but I prefer the best solutions for the temperatures
So a standard 120mm radiator wouldn't fit in the case?
Hey I'm asking the same question, could you install a 120mm or a 94 is the maximum ?
I bought the ryzen 5 5600g, can I change the processor to rycen 7?
Yes there is a upgrade.
does this work the same for the hp pavillion tgo1?
Yes
I thought they all came with a max 500w bronze PSU, how could that possibly be enough, esp if you have the 12700 with a 3060ti?
It will work just fine. the reason they say the bigger PSU is do to all the different configs they need to cover with a pc config. some PC have cpu's that can run 300 watts by there self's. Like my editing pc. so they CYA when it comes to PSU. your cpu is only a 65w btw.
Acer Nitro 50 Aio water cooling when will it come..
Waiting for it ❤️
It will be out tonight
Why those cpu clocks are so bad ?? 19:18 it throttles hard but not from the temps I guess... could it be VRM overheat ???
it due to power saving. If we would have peaked past 20% and held. it would have pulled the clock rate up. It was due to the C state of the CPU was in at the time. This is why just using 3dmark does not always give a full picture. I did not let it get to the CPU test in the video, once it does the clock rate jumps way up. Good question though. Because I did not even notice till you said some thing 👍👍😉.
can you do upgrade video for ram
yes
After installing Alpha cool and Noctua NF-A9 Fan, PC gave 'Critical_Process_Died' error and would not boot afterward. Had to revert back to the stock parts. Is there something I am missing?
BIOS Update ;)
mine dosent power at all.
Hi i'm gonna probably do this upgrade and i want to ask if there is any sound drop
The nocturnal fas are the best in the world in regard to sound and moving air.
@@TNW1337 Thank you! I knew that noctua will be a good option
Ни слова не понимаю мужик, но то что ты делаешь круто.
Спасибо! мне нравится твоя аватарка
10:19 The cable is not plugged in properly. Did you get rid of the error code 90B after plugging it in properly?
I did the plugs that way to avoid it I make have Dyslexia it around.
@@TNW1337 Do you still have the error code?
Can u include were u aio and fans I can't find them thanks.
I link it in the disco of thr video
@@TNW1337 can u replace graphics card or does it have to be hp graphics card
Will this work with the TG-01?
Yes 100%
Thanks alot for your video!
I am desperate, bought a victus 15L tg02 0014nl two days ago.
It has i7 12700 / 3060ti that is great but it reaches 100 C°, yes, no type error, 100 C° !!! Never seen a thing like that in 20+ years pc experience.
HP epic fail do not to mount a good cooling system inside that. And maybe also the case dimension, very sexy ok so compact but insufficient for a performance machine like this, only 1 92mm outflow fan...
Anyways, thanks to tour vid i discovered this little liquid system with 92mm radiator fan.
I think it is the only on the market, no?
I searched on amazon and i was buying an air, low profile cooler but this one is ofc alot better.
I ordered directly from alphacool website, 104 euro shipping to italy included.
I am going to buy also the noctua fan you are using.
Do you think it will slow down alot the temp?
I think 80-85 C° under intense stress would be great, i really hope it can do the miracle or this will be the worst 1400€ spent in history :)
Correct alpha cool does server stuff that is why they have all these odd sizes. 100C is not ok. depending on your environment with the AIO it will be 5-7 above room temp.
Im gonna buy one with the same specs. How did you solve the problem?
Do you guys think I could fit a Alphacool Eisbaer LT240 in here, it's dual fan it seems and bigger. I don't think I need it, but not much more expensive so thinking about it!
Thanks :)
Also, would a 120mm aio fit/perform better then the 90? I think it would perform better but I'm not the pro
I'm wondering the same, is a 120mm fit in this PC ? thanks@@stefancogurik166
I have just installed MSI 240mm AIO in my 15L... Its in the front and is half closed at the moment with the steel frame, i have max cpu temp 70-72... Tomorrow i will work on some holes for more fresh air and think the temperature will go down.
I was planing to make a video with the 240mm. we just didn't think many people would want to drill holes front of the case, I would make sure you do not get any metal shaving on the mobo would be my only advice. Maybe remove it. it is only 5 or 6 screws depending on the model
@@TNW1337 Hey any idea when this video will come out? I would love to give it a try!
My HP 15L victus comes tomorrow the spec is a ryzen 5700g with an rtx 3060 ti, i can't wait
Nice mine arrives on april 19 cant wait also sadly i got a 1660 super because i was in a tight budget not a bad graphics card but all i could afford hope you have fun :)
@@JoseDiaz-tt2vh it’s been almost 2 months since I ordered it back in February
Same
They are good little PC;s
@@JoseDiaz-tt2vh I have the AMD Version on the Way as well :)
Use it on the hp tg01-0023w
It is coming Yes
I do think that anyone who buys a Hp Pavilion/Evictus needs to do some kind of cooling. I installed a fan on the front,side and molded my graphics card by cutting a little square out of the plastic shroud for the 1650 and added a thin 92mm fan for extra cooling and since I have done all that the cpu doesn't go over 80 and the gpu doesn't go over 75. Also repasted both with kruonaut thermal paste. I'll include pics if I can. The only thing I wish is that it wasn't a proprietary motherboard.
agree
Will this with a 3070 fit? Also will they both work with the 500w pcu?
a 4070 will work so yes the 3070 will to.
I plan o upgrading to a 4070 soon.@@TNW1337
Can u use the aio h60 from Corsair
Do not think so
@@TNW1337 h60 is 120mm, in the victus case rear fan is 92mm. Which is Alphacool in this video
I just got a 0013W and am looking to do a lot of upgrades, so if any one knows of other hard drive or cpu mods, let me know.
Where would you like to start?
@@TNW1337 So far I now have 32GB ram, a 2TB SATA drive and a 4TD internal hard drive. I guess next would be a graphic card? Would it be worth the money to get a different processor?
I have the same one, so far I upgraded the ram to 64GB added a cooler master to the cpu and was looking to upgrade the ssd and the gpu…
To all who want to do the same with the tg01, buy also a fan cable splitter. Without it, it doesnt work. The cooler is a 3pin, and it's a 4 pin on the motherboard. Interving the fan and the watercooler cable like in the video ended in watercooler not working on my tg 01
Have a link for cable fan splitter?
So you used the cable fan splitter 3 pin to 4pin for the Aio 3 pin and plugged it into the cpu fan and it worked?