Installing Sharkbite Shut Off Valve and Inside Hose Bib from Copper to Pex
HTML-код
- Опубликовано: 6 сен 2024
- While replacing an outdoor leaky sillcock I decided to also add a shut off valve and indoor garden hose bib.
Sharkbite Shutoff Valve (1/2" to 1/2"): amzn.to/46qQVH3
Sharkbite Hose Bib (1/2"): amzn.to/3r7s6j7
Copper Pipe Cutter (1/2" & Round)): amzn.to/443dakC
Pex Cutting Tool: amzn.to/445JnrJ
Deburring Tool (Inner): amzn.to/3PFFmWp
Deburring Tool (Inner and Outer): amzn.to/3ND4GcS
Tapcons (3/16th 1/4th Torx): amzn.to/3XCxUx2
Hose Bib Install Video: • How to Attach Hose Bib...
Water Heat Replacement Video: • How to Replace an Elec...
Sharkbite Supply Line Leak Video: • How to replace leaking...
Time Stamps:
00:19 - Chapter 1 - Install Sharkbite Shut Off Ball Valve
03:02 - Attaching shut off valve to 1/2" copper pipe
03:58 - Chapter 2 - Remove old and install new outdoor hose bib
06:03 - Chapter 3 - Install blocking, pex, shut off and indoor hose bib
Date of Activity: 6/6/2023
Camera: amzn.to/44pYGLx
Mic: amzn.to/3NB7XJN
#DIY #Plumbing #homeimprovement
even with sanding
if it dont leak. . . . job well done. . . . . . . . . .
Sharkbite works phenomenally well, IF, IF you prepare everything correctly and install it correctly, as you’ve already learned previously lol good stuff!! I’m using sharkbite shutoffs pex to copper on my supply and exit lines on my water heater and it’s been a year so far with no issues. I do need to drain and replace my diode in the tank so that it lasts longer and with my hard water it’s a must!!! Appreciate the videos!
God bless~
first thing you did wrong is sanding the end of the copper pipe, this is not recommended when using a shark bite fitting. it creates a profile on the pipe which can cause failure.
Was trying to DIY debur. I need to get one of those tools.
you did debur, that's necessary, the sanding isn`t.@@weekendhomeprojects
@@xbrizzcakez I had the inner debur tool, but not the outer. Probably not as important as the inner tho. Thanks for the comment.