PEX Pipe Installation - ALL Connections To Fittings In A WHOLE HOUSE!
HTML-код
- Опубликовано: 28 апр 2024
- In this video I will show you a PEX pipe installation I did while building a whole house! PEX pipe installation tools are expensive but if you want to know how to install PEX pipe you must buy them. I will show you all the connections to the fittings of a washing machine outlet box, ice maker, sink, toilet, kitchen sink, hot water tank, and showers. You will see how to cut PEX, crimp PEX, and install PEX even if you are a beginner! .
🟡 Check out my Amazon store! 👉 www.amazon.com/shop/theexcell... . Here you will find tools and supplies used in my videos. (DISCLAIMER- I am an Amazon affiliate. I get a small commission that help support the channel at no extra cost to you)
My plumbing supplies and tools amzn.to/3J5dQf4
1/2” And 3/4” Copper Crimp Ring Tool amzn.to/3GXV6MY
PEX Pipe Cutter amzn.to/3J3iaLR
IRWIN SPEEDBOR Drill Bit amzn.to/3yJ5QM1
Ridgid 18V Tool Combo Kit (5 Piece) amzn.to/3FbRJl3
My Tool Belt Setup amzn.to/32kmcyz
Tool Belt amzn.to/3E4v1Kc
Hammer amzn.to/3E8kldp
Tape Measure amzn.to/3J68hNx
Speed Square amzn.to/3J0cPoF
Chalk Box amzn.to/3p9ziYv
Utility Knife amzn.to/3ecJPM9
Other helpful videos
How to Install PEX Pipe: Easy DIY Tutorial for Beginners | Step-by-Step Guide
• How to Install PEX Pip...
How To Rough In Plumbing Under Slab For A Bathroom - FOR BEGINNERS!
• How To Rough In Plumbi...
🔴 Subscribe for more home building tips to save a TON of money here:
ruclips.net/user/theexcellentlabore...
Disclaimer: This video is all based on my personal opinion and is for entertainment purposes ONLY. I am not a financial advisor, CPA, attorney, tax advisor, electrician, plumber, housing contractor, designer, or any type of profession to give advice. I am just a consumer sharing my experiences and research. If you do need knowledge for those types of things, I will advise you to seek help for those professionals. 
Хобби
![[TF2] How to Trolldier: The Hybrid Gardener](http://i.ytimg.com/vi/r6M6bSu9UMY/mqdefault.jpg)
Checkout my Amazon store for the PEX tools and fittings! www.amazon.com/shop/theexcellentlaborer
this is some back yard bull shit so many things done wronh
No PEX "requires" an expansion too but non-expansion fittings restrict water flow.... Which is never ideal but at least it has to compensated for, so you should have mentioned it.... Also expansion fitting do not need a Go No Go tool, so its much less likely to ge a leak for DIY..
And PEX A if more flexible... so less or no elbow fitting are needed...
I get it PEX B, Crimp fitting and tools tend to be far cheaper... Its just expansion fittings are the better option... BTW there are even a few PEX B piping brand that can use expansion fittings too, since they maker know they are better....
"wronh"??? lmfao
@@nc3826 since they maker know they better??? Its even funnier because you called out the other guy even though he obviously has no idea what he is looking.
What brand PEX do you recommend? Ive heard some are better than others.
I grew up working with my dad, who was a plumber. However, PEX came out after I stopped working with him. I could do PVC all day, but this video gave me the confidence to finally start working with PEX.
I think I love you. I think you saved me a small fortune. Thank you. It's channels like yours that keep me on RUclips.
I hope your projects go well for you. I appreciate you watching. Good luck with your build!
Being an old copper plumber...my OCD kicks in seeing all these bends instead of perfectly straight pipe precisely hung on hangers. I do have to admit, PEX is a huge timesaver and beats sweating copper all day long and coming home with burns and sore flux cuts on your hands. Nice video.
Can't believe how easy you make it look...if only I learned this instead of Calculus in high school!
This channel is a gold mine of extremely helpful information.
Hey Ike! I upload 1-2 times a weeks. Stay tuned for lots more to come. Thanks you!
Maybe for some areas but it's stupid where you have rat problems they eat it. Houses are flooding here all the time an as a construction worker I love it keep installing these, endless work.
watched this then looked around my utility room for 30 minutes just studying the pipes haha, thanks for another great video. been binging your stuff today, it’s really comprehensive
Awesome, Kevin! That is what I love about this platform, you can learn so much here. Good luck with your project!
Josh I've taught and taken more classes than I can remember and you are an EXCELLENT teacher/instructor in all your videos. Perfect speed, show the items, explain key points, not too repetitive, keep it moving, etc. Thanks for sharing your skills!
Thank you so much Phil! I’m glad people find my contact helpful. That is the goal of my channel. Stay tuned!
Phil you said it all 👍🏾
.v@@Ronjonsensorrow
You got that right.
Boss video! From start to finish. These guys are so great, all they want to do is share their knowledge and make the world a better place.
Thank you Raymond!
@@TheExcellentLaborer And thank you too buddy!
I don’t even have to do this but it was fun to watch it 😂
Loved when the camera followed the 'route' like an jet-plane or something. Thumbs up!
I try to get creative from time to town. I’m glad you like that scene. I appreciate you watching and giving a thumbs up!
I’m a 30 year shop teacher.
Great job on your videos!
Thank you for being a educator as well Scott ! Take care.
Absolutely epic video, you and you are a great instructor. I learned a ton and I want you to know, I appreciate you, for sharing your hard earned knowledge.
I appreciate that Paul! Stay tuned for more!
Great comment. I have 30 years under my belt and when I show new guys my tricks, I tell them that they learned something in 5 minutes that took me years to learn.
Absolutely appreciated, I’m an older guy and have installed lots of copper in our houses over the years, the pex kinda intimidated me and I wasn’t trusting in it, but your video has helped me see that it’s not intimidating at all. Thanks so much for this great video.
You are welcome Martin. Thanks for washing. Good luck with your pex pipe install!
I guarantee this is gonna piss off a lot of old school plunbers... because it works! Awesome video, man!
My wife would call this video dangerous because I'm feeling unusually confident about replacing all my poly B pipe by myself now. I can hear her cursing at me from the crawlspace access already :) Thank you for your thorough explanation!
Great instructional video for this Pex water supply system. Personally though, I'd install support blocking at every fixture where the supply comes through the wall and secure the supply line to the blocking. The cheap, plastic ice maker and washing machine receptacles need additional framing too. It's always been a pet peeve when the fixture cut-off valve isn't solidly secured.
I feel like i could re plumb my house! Amazing and easy to understand. Thank you.
This is very thorough. Thank you.
Howdy from the great Republic of Texas.
The 2 big benefit’s of PVC (Plastic) over brass fittings are cost and PVC will never corrode. These pipe fittings never are under stress and PVC is very strong, PVC to me is a win win deal. I’m not a plumber but I am a Journeyman Pipe Fitter since 1975. One last thing before you hydro test I would have joined all hot and cold piping this ensures that no air is trapped in the branches. Otherwise you did a quality job.
I came for the Pex, but I stayed for the music! Who was rocking this out!?!
That’s too funny 😂 I am working on keeping my videos informative and fun. Thanks for watching!
You make me feel like I can do anything! Great instruction!
I wish that pex was available and used 40 - 50 years ago. I was an Army Engineer teaching plumbing and carpentry in the "80 's. Copper was what we used.
I am jealous of the space in you crawl space...mine is barely big enough to squeeze in.
A timely find and an excellent video to study as we prepare to re-plumb an older house we are purchasing. Thank you.
Same here! Good luck!
Good job, young man. So glad to see a contractor that is determined to do the best job he can. Keep up the good work.
Thanks a lot! I try to do the best I can. I am only human and sometimes it’s not perfect but life goes on! I appreciate the comment!
@@TheExcellentLaborersince you have a disclaimer that says you're not an electrician, plumber, or a contractor you should correct someone when they call you a contractor in the comments.
@@chichidouglas5078 Get real there Chi Phi Geesh what’s a poof
@@georgedavall9449 what?
Good and clear instructions. Overall great video minus the music 👍😀
The best. Explained better then anyone
I’m glad you liked it!
Awesome video. I always use the rubber handles of my pliers to pre “crimp” the fittings. This way you avoid any scarring to the copper rings!
Great video. I'm an industrial electrician, so it's very helpful for me to see your example because I'm not familiar with residential work. I have a few jobs to do around my house, and your video is concise and answers my questions. + I like to learn how things work. Thanks
Following. Has to be the best video ever on this. I am and electrician that knows nothing about plumbing. Imgetting renovation at my house and just spent 4500 on plumbing and found leaks at these crimps. Well I will be repairing myself thanks to this video. Thank you
Impressive: I was literally thinking "shouldn't he put in nail plates, like for copper"... exactly when you mentioned it!
Great video. A couple thoughts. The radius brackets are a nice alternative to a cut and crimp 90; it's one less fitting. Many of them also incorporate a nailing hole to fasten them to the structure. The stub-out brackets are nice for sinks and toilets. Call me old-fashioned, but I like shutoff valves to be firmly secured, not flopping around.
Very good comment about shut off valve.
Yes I was gonna say the same thing. When he was putting in the toilet line I thought the same thing. You might have to put in block so you can nail the radius. But you wont have any leaks there. Cause that alot of joints for a toilet.
could you please post a link to one of those "radius brackets" you mention?
@@RonH465 have to wonder why he is using pex
@@bgBleaideally one would run pex without joints wherever possible to avoid possibility of leaks .
My old home had polybutylene piping that constantly sprung leaks. I replaced it all, myself, doing the blue and red pex pipe. I loved working with it. I almost choked on the price of the crimping tool, but hey, I did it myself and never had another problem. Great video.
If you think the crimping tool is expensive, price the expander tool needed for PEX A.
Mickey Mouse system
This is the best video explaining everything properly and how it should be done thank you!
I'm standing inside Home Depot just watched your video Great info just in time I'm going to be running PEX in my house starting today.
Excellent video. well done instructions. I could do without the irritating music, though.
I always hate background music. It’s annoying and I’m hearing impaired so it just makes hearing much harder.
I agree with the background suggestion
I would not have noticed it if people didn't complain about it
I agree with removing the music..
I know what you mean. Makes it difficult to focus on what’s being said
Bro, you're the best. Nothing else to say. I appreciate the gold mine of information you provide as you narrate your work. The information about the codes, like distances to and from, and why, is a valuable piece of info.
Thank you and please keep up the great work. I appreciate your videos, and all your info.
I’m so glad I could help you. I put a lot of time into getting a lot of information in these videos. Thank you for watching them! Good luck on your project!
Having done so many complicated things my life , watching this video is relaxing. Einstein said I wish I was a plumber. I agree with you Einstein, I get so much joy watching things in real life than reading hundreds of pages of math and get really depressed.
From a master electrician trying to learn, good video man!
Great job brother! I’m going to learn from you! Thank you.
I appreciate that. Thanks a lot Angel!
Straight to the point. Showed me what I need. Spoke about how to do it. Demonstrated the How at half speed, then went full speed to set the standard for expectations. Perfect. This is my project this coming July. I appreciate your video.
Cool, all I need is a conex full of tools and material 👍
You got a subscriber brother.
Welcome to the channel! Thanks for subscribing. Lots of videos in making!
These lessons are so clear and concise! Great descriptions and now a permanent part of planning for my remodel in MN and my future new addition in OK.
Hey Phyl! I’m glad I can be helpful to you. PEX pipe is pretty simple to run once you do a couple pieces. Thanks for watching!
If I was you I would use A pex, with expansion plastic fittings, you will have a better product and better water flow.
This was awesome ! I’m going to build a cabin next year and save this video for future references. Can’t wait for the pressure test. Keep up the good work 👍🏻👍🏻
Thanks a lot Gilles! I hope you found the video helpful! I will be pressure testing soon and water testing the drain lines. Appreciate you watching!
FYI - Just be aware that rodents love to chew up this stuff and can cause a major leak.
@@ericinla65 How do you protect the pipes for a cabin on concrete stills?
@@GillesTanguay If an Rodent or Animal can get to the pipes. You have to use Copper Pipes.
Hey Josh. I am a new subscriber, I'm still learning my name is Jose Morales, God bless so much brother and have a wonderful new year. I have been learning a lot from you. Thanks keep humble brother and the good work.
Such a good tutorial. I really like the needle nose trick, My wife is gonna hate me cuz I'm gonna do all my own plumbing from now on! LOL Thanks.
Thanks so much for an incredibly well done video! :-) Appreciate the time that was put into this. I've notice in the comments that many folks have asked about the cinch clamp vs the copper ring method used here. I prefer the stainless steel cinch clamp vs the copper ring crimp system. As the cinch clamp is stainless steel, it is less likely to corrode than the copper ring. Also, the cinch tool is easier to use in tight spaces & fits all size clamps - with the copper ring crimp tool you need to change jaw sizes for different size rings, apply more pressure, & you need to use a go-no go gauge. It's a personal preference thing...from what I have read, both types of connections are equally reliable, except for the corrosion issue with the copper rings. The expansion system, where a tool is used to expand a collar fitted on the end of the Pex pipe & then the Pex fitting is inserted, may be the best way to go, but the powered expansion tool is several hundred dollars...there are cheaper manual tools, but from what I understand, they are difficult to use & not really recommended.
For people that use well water,use 3/4 as your main twin,use 3/4 to 1/2 reducers to run to your sink/shower faucets,toilets,and vanities,it produces more pressure
I have 3 neighbors who have had to file insurance claims and have their PEX plumbing replaced. They all had one thing in common. The homes were built in the summer and the plumbers were careless leaving the pipe out in the sun before installation.
Awesome video for those who want to learn (or never heard of) about pex. We re-did all my water lines (they were older and some had previously leaked), luckily they were all in the basement with easy access. We used pex clamps instead of the crimp rings. Just curious of why you use or prefer the rings over the clamps.
Great video my guy!
Exciting too see a water installation from a different country.
I’m a plumber myself, but I Denmark, and we do things very different, but nice to see how other countries do it!
Keep up the work!
I came for the music. The plumbing is a nice touch.
By far one of the best step by step PEX install
Dude I've sat here thinking that I could never do my own plumbing shit and this has given me all the confidence I need to be able to go tackle this shit.
Now all I need to do is find someone to teach me basics of electrical like you've done here with plumbing and it's a wrap. I'm gonna be so productive.
Great video! I am currently replacing a lot of damaged flooring and walls due to some idiot not using crimp fittings, but instead used the "Sharkbite" type connectors. Almost all leaked. The repairs will cost me thousands. Guys, do yourself a favor and use the compression type like shown here in this video. A job that lasts is a professional job!
I thought you could use sharkbite on people. I have some seven years old under My sink
Tampa Florida check in
Hey Bob!
This is up there with the best "how to" videos. Thanks for doing it.
I replaced all the PVC pipe in our house with PEX in 2014. Used the copper bands , PEX fittings and copper hot /cold manifolds. Worked great, no problems at all. I purchased the Pex tool kit, paid for itself 1000x over.
At 11:04 on video, a good measure of support is to add short block on the other side of the installation box topped with a short block on top. Over time, trust me, the plastic ears on the flange break. Just something that I do myself!
Agreed. I always support those boxes on two sides with a stud or blocking.
After watching this video I have decided that you are now my Plumbing Guru - Thank you for your excellent factual videos.
Great job mr water pipe
Great video! Just a FYI note, as a GC I've come across several major leaks in my area from the brass fittings because we have extremely hard water & the calcium builds up around the brass & expands causing the rings to fail! Their for all the plumber's in my area have switched to only using the pex fittings & not the brass, not saying that in your area is the same problem just saying for you as a content creator it's good to know that their's a place for everything & not make it look like that brass is the right way to do it for everyone, I hope you take it as constructive criticism
& btw love how simple & clear you make your videos & I just subscribed myself
Just so I am understanding you correctly, you're saying they are using the pex plastic fittings instead of the pex brass fittings?
@VInce Morath correct! The downside to plastic pex fittings is that it is a little more fragile then the brass ones so if you stress it hart or bang it with a hammer it could crack (& I've seen a fitting with a minor crack that was not visible & it was leaking... but if you install them properly & pressure test them they'll last virtually forever...) but with hard water like we have in upstate NY it is the best option for us & we stay away from as much brass & copper we can
@@allforcreativity I agree about the brass fittings. They only last a few years here in NC with my well water too. I haven't had any trouble with the plastic fittings that I've swapped out.
True, in my area, pa, I have seen tons of brass fittings fail
@@allforcreativity Hi there.....I found that red brass is allowed per code in lieu of yellow brass in some areas and that is directly related to hard water....since the zinc content is lower in "red". Are you aware of red and do you have any reason not to use that?
I appreciate the great video that will help me a lot for replacing my water lines. I'm curious though why you use so many 90 degree connectors. It seems like it would be better to just use the 90 degree bend support brackets. That way there would be a lot less fittings that could possibly leak. Can you tell me which is better or why you do it this way?
Also, you lose a lot of pressure every time you use a 90. You can tell he's a laborer, not a plumber.
Thanks for this helpful video. I've lived in south Texas for the last 22 years and I'm done paying plumbers a small fortune for a small job every time it freezes. This time it's me under the crawl space with a prayer, pex pipe, and your helpful instructions. God bless you.
The Anit-Freeze tip is worth the video already. I am excited about doing plumbing now! Thanks
Thank you for sharing your knowledge.
No problem Noah! Thanks for watching!!
Something to think about with type B. You need to upsize because the fittings are a smaller ID and will cause a water flow restrictions. For example if you need 1/2 use 3/4 to compensate for the smaller ID. Type A PEX the fittings are nominally the same as the pipe.
How do you determine to use either type A or B?
@@siulseyer8053 pros and cons of both. Just your preference.
@@siulseyer8053 depends on if you want a 25 year warranty on the pipe. Uponor pipe is the only one with a 25 year warranty from the manufacture
Always use brass connectors, plastic connectors have smaller id's and therefore have greater water restriction.
@@siulseyer8053 I’m the biggest skeptic in the world. For 6 months I’ve read and viewed just about everything available on Pex plumbing, trying to find the flaws. I haven’t figured out why all new residential construction isn’t done with Pex A.
People like you makes other people life better, chasing a plumber for mi new kitchen project and on top of that I have to pay an arm and a leg for the work , end of the story ? I’ll do it myself, I ordered the tools set on Amazon and the rest from H.D.
THANKS !!!
Glad I could help. Thanks for watching!
The storage of PEX instead of long copper tube , would be like a blessing and amount of space in the van .
Great stuff man ! The continuous callout of the methods, measurements, and items used is so nice ! New home owner here and discovered our washer has no HW hooked up 😢 your vids have made me confident in this DIY. Much appreciated and keep ‘em coming 😊
Should of up sized everything since you used type B. That’s why I like type A plus type A is a lot more flexible
Great tutorial, i was feeling very nervous about redoing the plumbing on a small cabin (wife wants to relocate sinks and toilets) but your video is given me hope. Thanks for sharing it.
Thank God for this considering what plumbers charge.
Thank you for this video. If someone already asked this i apologize. When you did your long runs across the joist you did not drill a hole and go through the wood. Doesn't that make finishing the basement hard? And is this all PEX A type tubing? And you used a lot of elbows where i see others bend the tubing about a bracket for turns reducing the number of fittings.
This is pex B, you can tell because he is using a crimp tool. Pex A uses an expander tool.
You are correct in a basement you would need to drill the wood. Also using A pex gives you a 25 year warranty if you use their plastic fittings, not brass. Brass will corrode after 10-15 years. I have gone back on so many of the crimp systems and fixed leaks.
That’s not a base,ent though it’s not a crawspace
PEX is awesome stuff, way easier than sweating copper. And it’s inert, so no corrosion or unwanted water/ metal reactions.
I agree. PEX all the way!
copper antimicrobial, so it better for "drinking water."... and sweating less restrictive cheaper copper fittings, is not that hard to learn or do correctly....
@@nc3826 ahh you’re a romantic ;-) All true, but not sure Cu’s anti microbial properties will make a significant difference for the water supply? If you have bacteria in your drinking water that is a problem with the source. I have corrosion issues so PEX is right for me
romantic engineer is an oxymoron...
FWIW copper holding tanks and pipes where part of a legionnaires disease outbreak prevention regime in hospitals from drinking water that where a major killers in the past.. since all water sources have some bacteria and other organisms... also PEX leaching is an issue too...
and you trade corrosion issues for rodent and sunlight issues with PEX...
but PEX A piping using expansion fitting.... is still a great idea, just not for potable water...
but think what you want my YT expert friend, It's all good...
Great teacher! I have an older house to retrofit with pex. Thank you!
man this is great. should show it to my plumber who messed up our new build
If repiping an existing home, and you're planning on doing one section at a time, what is useful are the removeable sharkbite push cap for copper to terminate the copper pipe. For polybutylene, one can be made for a PB-PEX transition, a few inches of PEX pipe and a PEX push cap. You can then run PEX from that section of your house to your new manifold.
Shark bites suck. I would never put one inside a wall.
Had a Sharkbite to copper pipe fail after 2 years. Corrosion and slow leak.
With PEX-B fitting you need to oversize the system or you're going to have flow volumne issues. should go with PEX-A
both pex a and b are inferior to copper when it comes to reduced I.D.
Just bought our first home and now I have the urge to replace all the copper with PEX. At least the laundry area warrants it haha!
Excellent PEX tutorial. I really needed this. Thank You.
Definitely should use PEX-A with expansion fittings.. The pressure drop of all those PEX-B fittings adds up and will never flow the same as PEX-A.. Plus PEX-A is super flexible and if you kink it, you just heat it up and it is good as new..
With pex-a available, its just dumb to install B anymore,
Exactly how did such a good plumbing system get hijacked.
im new to this but it seams like that the copper ring over time will sweat and oxidize andthen add in water hammering. pop your done. i would go pro pex-a myself.
I'm fixn to build a whole damn house from RUclips
This is a good channel for reference. Let me know how it goes!
Im plumber indonesia,, your videos very cool❤❤❤❤❤🎉🎉🎉🎉
That guy did an excellent job on that video in the packs good job
I have found the cheapest and most efficent way to install Pex is with a Manifold and home run piping system. You don't have to use all of those fitting.
That’s a good point. I really did not think about it like that. I would have to do the math to see how much is saved. I’d say at least $50 a house!
@@TheExcellentLaborer Maniblock block system is in no way cheaper. In a trunk and branch system just as you did here in the video you may have used @ 150 to 200 feet of pipe. In a miniblock system that would between 500 to 700 feet of pipe. Not to mention the maniblocks cost @ $400 by themselves. You didn't have that in the whole job you just did.
Actually you shouldn't use fittings unless doing a branch off the trunk.. Trunk and Branch is ideal if you plan to have recirc hot water, but the manabloc has it's place (I put on in on the last house I remodeled).. My new house under construction will have two 1" trunks and dedicated branch manifolds close to the user. Less fittings and PEX if done right.
2:48 I'm so used to having to go out to the meter box at the curb, 15 degree temps with snow on the ground and struggling to fit a crescent wrench properly to shut off the water to the house before the pipes thaw and floods. When (what year) did the human race finally wake up and start putting shut off valves inside the house, and why didn't they do it sooner? I haven't seen those, even in newer tract homes being built today. Shouldn't ALL builders be doing it?
I love your content! Be safe out there everyone 💜💜💜
The perfect information at exactly the right time! Thank you
If you are showing this for beginners, you should show with the stainless steel clamps instead of crimp rings. This way they won’t need a go/no-go tool and It will be a lot faster. Personally I like the stainless steel clamps better
I agree 👍
I was using the clamps just now and my pipes are not being properly secured. I am stopping for now and waiting till tomorrow to swap for copper crimps. I bought the crimped tool thinking it would work for the clamps but k think it’s not working right.
Post the video you made here with you doing that.
Thank you for taking the time to film / post this video !!!
truly the most helpful video of PEX Piping... constant communication of step by step
Wow, that's a GENEROUS crawls space ! LOL
Nice and clean and no spider or dust webs and no , old insulation, or other obstacles old flag stone foundations added one... And head room .... Lucky you
When I built the crawlspace I made sure it was high enough to work under easy because I knew I’d be the one working under there LOL. A new construction house is definitely easier than an old house. Thanks for watching Chad!
Awesome video, great teacher. Thank you for all the information.
Need to help out my step daughter replace some plumbing. Can't get a contractor , I guess the job is too small. Thanks for this lesson.
Great work. You just made me ready to go!