MONSTER TORQUE!! 834 oz/in - AGFRC 12V Smart Servo - Unbox, Install and Testing on Traxxas TRX-4
HTML-код
- Опубликовано: 4 сен 2024
- AGFRC is one of the few Servo manufacturers, so they offer top quality products without all the "hype" and marketing of a brand name. Take a look at their latest 12v direct connect brushless all Aluminum case servo. With over 800 oz/in and everything you need in the box (adapter and aluminum clamping servo horn) AGFRC has you covered for those tough demanding RC's like crawlers, scalers and monster trucks.
Get your AGF Servo here: amzn.to/2zTI6uH
TRX-4 Builders Kit: bit.ly/39vufHv
Best RC Tools: bit.ly/2QHyA2Y
ProTek 3S Battery: bit.ly/2zyuhBU
More about AGFRC here: www.agfrc.com/...
✦Connect with The RCNetwork✦
Don't miss out on more RC blogs, pics, and newsletter from
TheRCNetwork.com. Get the stuff that's not on RUclips!
Subscribe today: www.thercnetwor...
Instagram: / the_rcnetwork
Facebook: / theofficialrcnetwork
✦Get The RCNetwork Decals and Hats✦
Click to Shop: www.thercnetwor...
✦Get RC Product Recommendations✦
Visit The RCNetwork's Amazon Page:
www.amazon.com...
✦My Video Gear✦
Studio Camera: amzn.to/2a0que9
Studio Tripod: amzn.to/29VIZ89
Studio Lights: amzn.to/2a4Ecmb
SD Cards for Studio Cam: amzn.to/2acPqSS
Lavalier Mic: amzn.to/2acOjCO
Action Camera: amzn.to/2a94Sfv
Action Mic: amzn.to/2aoZOpF
SD Cards for Action Cam: amzn.to/2a946PB
#thercnetwork #AGFSERVO #traxxas #trx4 #scaletruck #scaler #chassiskit #rc #radiocontrol #rccar #rccars #remotecontrol #hobby #rchobby #rcracing #rctrucks #rcnews
“TheRCNetwork.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.”
Thanks Rich! Great to see more voltage versatility in servos. I fly build and fly multi-rotors and most of our equipment has quickly evolved to handle 2-6s and some even more. So high input voltage compatible servos is a no brainer😊
I can't agree more - I think there's a lot of aerial advancements that should be in surface vehicles
Looks like a great servo. I really like the balance plug to servo set up, that is slick.
I couldn't believe it when I saw it. I had a 12v servo before, and it was a pain getting direct power without having to solder something
Agfrc produces servos for reefs.
There's a few that they produce for...but for some reason, many people defend that AGF does not produce for Reefs
The RCNetwork there simply no denying it thou...micro 99 is a AGF a20, raw 500, and triple 7 uses a AGF programmer. Even software for triple 7 has a AGF abbreviation in it... “ASS” (Agfrc Superior Servo)
I absolutely love agf rc servos.i bought my first one roughly 4months ago for my 2wd lcg slash speed build.the one I purchased is the A6wBLS.its a low profile servo that is also programmable and has a operating speed of 0.074sec/60⁰@6.0v up to 0.062sec/60⁰@8.4v and static holding torque of 167oz-in @6.0v up to 202oz-in @8.4v.doess have a brushless motor with a double bearing setup along with titanium and strength steels gears.i have bec on my castle mm8x esc set at 8.0v and im running 17mm hub adapters with dboons tires from the infraction and this little servo throws those tires around like they're not even there.havent tested power yet but seems to be putting out a lot more then what servo is rated for.loved this servo soo much that I actually bought 3 more off this model for upcoming builds such as my no prep drag slash as well as a few stronger ones for a upcoming crawler build.one thing I like is that some of the agf servos can be programmed to run as a regular servo or run it as a winch servo with a continuous 360⁰ rotation such as one in this video.AGF servos are literally my go to servo now.they are a bit on the pricey side but just like anything else in life,your gonna pay more for high quality.highly recommend these servos for anyone and for any application they need a servo for.
Yep, they're great stuff and the only servos I'm using now. $ for $ they're better than anything out there.
@@TheRCNetwork thats actually nice to know because prior to purchasing the A62BLS i never heard of them before and basically took a chance on purchase.extremely happy I took that chance.i just wish the wires on mine were about 2in longer being leads on model i bought are only about 9,10" long at most and made for a very tight fit.
AGFrc freaking rockx!!
I agree!
I agree.agf are my go to servo now.i liked the one I put in my speed slash soo much that I bought 3 more of them plus 4 others for upcoming builds I have planned.
JESUS! that's power.
Dang, kpop is in the house! Thanks for stopping by
Yes please! I need one in my life!
It's a great servo - run them in all of my crawlers now
@@TheRCNetwork I need one for my trx6. I also need... to buy a trx6 hahahhaa!
Nice looking servo, thanks for sharing!
Thanks for watching!
Yup he's correct. I bought my first 1 for my Mojave exb. 55kg. It's a monster. Can't wait to put them in my 1/5 1/6 scales
It really is a beast!
A little trick I did that made my life easier was to use a 6 volt relay that is activated by receiver / ESC power to connect the servo to directly to (with a JST connector) battery power at the ESC. There are no extra wires to hook to the battery this way and when the ESC is shut off power is removed from the servo.
Great idea there!
@@TheRCNetwork it works well with BECs too.
Awesome servo...
I agree!
What RC would you put this SERVO in?? Get yours here: amzn.to/2zTI6uH
Hell Yea Brother
Thanks buddy!
I'm considering this servo since the G13 and SHV500V3 aren't in stock right now. How is factory support from AGF? I'd hate to buy another one of these should something happen and just need a gear or something.
I haven't had to use any factory support from AGF, but they are based in China, so there can be some delayed responses.
Thank you for your interest of our servo, if confirmed it is quality issue, we can bear the replacement, if damaged during usage, we can help to repair it. And if have any question or doubt to use, you can aways contact us freely by mail or join our FB page: facebook.com/agfservo, we will reply you asap. Besides, we will provide lifetime technical support.
Big power equals big price
In the grand scheme of things, you won't need a BEC, Aluminum horn or any adapters.....so, it's a win/win
I would need months of runtime before I could make a good assessment. Good video!
Of course....this is just a preliminary test of the servo, but I've had AGF servos in my builds for months now with no issues
Looks a lot like the "patented" triple 7...hah!
Another servo they took from AGF and rebranded
Which came first? The chicken or the egg? AGF is a servo manufacturer. Said numerical servo is a marketing company
No question the AGF...it is available since the end of last year )
Yeah, I just ordered one from NSDRC!
Do you think this would work well in a yeti xl?
Yes, it would be great in the XL - plenty of torque
Try the JX 72kg-cm servo!
Converted to oz-in, that makes 1000👍
This servo also reaches over 1,000 oz/in - I only reported the box specs. On their website it clears 1,000
Great ! I have a question, how could i connect it to my 3s or 2s traxxas lipo battery ??
You can direct wire it through the plug as well. If using a lower voltage battery, you'll just be direct powering at a lesser voltage rusting in lower torque numbers
I’m not sure if you mentioned this but can the servo go into a sct?
Yes, of course - make sure and check the size of this servo - it's a bit taller than average
Would this run off the balance plug of a 2s Lipo?
I haven't tried that....
How would it work with monster trucks? Like clodbustrts or TXT-1-2?
Darryl Martin Barnes yeah, definitely. If you run a 3s Lipo, it will be plug and play with the maximum torque
"overseas" as in China?
Yes, AGF is based in China, as most servo brands are made there, TBH
Have you tested the claim, 800 plus ounce inch of torque? How does this servo compare to the Reeves 777 servo? They have put that servo on a tester, and it is a true monster. I believed they got 1000 plus inches of torque out of it.
Luis Cortez I haven’t tested the claim....but who do you think makes the Reefs 777? 🤔
@@TheRCNetwork Ah, true that.
@@lexsteel12 AGFrc builds the servo for reefsrc.
Hi man great video. I am Vittorio from italy. if i understood well i have to link the red connector of the servo into balance port of the lipo? nothing else ? thanks a milion
Yes, AGF gives you that option.....or you can solder it straight to the battery connector
@@TheRCNetwork thanks a million just another question. The Horn metal servo is correct for trx 4 ? Which of the two holes i have to use?
So I bought one. But when I try to program it The software says Error check connect of module. Did you have any difficulty programming yours? I have the spv2 and software, the software responds to the usb unit, but won't connect to the servo.
I haven't messed with the programming yet.....try contacting AGF directly through FB. They're pretty responsive
facebook.com/agfrcmodel/videos/690549494823865/
The price isn't to bad I've spent more on other servos that have half the torque
The value comes when you don't need a BEC and aluminum servo horn. Plus, yeah, it has enough torque for anything RC
Would this work on a traxxas 8s xmaxx or a tekno mt410 or what would you recommend i dont like the traxxas ones
The main issue you'l run into is the connection - the included adapter is only 3s compatible. You can make a connector to go directly to a 4s Lipo via the battery connector. Also, keep in mind that this servo is rated to 14v.....but some people have tested it on 4s before (14.8v) with no issues
Rich, have a servo question. I'm looking to get into electric 1/8 scale Truggy racing what steering servo would you recommend? Im not worried about budget, I want to get the best that I can.
Take a look at this servo: amzn.to/38xWnwk - Still from AGF, but it's solid for Truggy. 0.085 second transit and over 600oz/in of torque. If you haven't heard of AGF, they're actually an OEM manufacturer for many of the big brands. I have been running two of them in my builds and they're solid (the A81BHMW)
@@TheRCNetwork looks like a solid pick, thanks Rich.
@@TheRCNetwork oh another thing, Radio?
@@Darkslide2AR-FE Really depends on your budget - take a look at the Futaba's: 3PV, 4PM, 7PX. Prices go up with the number, but all solid radios
Dang that thing costs the same as my ecx amp with a brushless system. I guess it must be that amazing
This is the top of the top for spec'd servos. It's obviously not needed in an ECX platform, but for some situations (scalers, crawlers, monster trucks, large scale, etc)
Carfull u can still burn it by mooving it that fast
Naw, I tested it a few times....even in 85 degree weather on the rocks, it was still pretty cool in comparison
@@TheRCNetwork oh OK thats good
Yeah and bigger and bigger prices
Considering the amount of torque, it's right in line, if not cheaper than most 500oz/in servos
But get one this smart servo and one USB programmer, you can use the servo as two different application by change the firmware: regular servo and servo winch
Good morning where are you get this servo from?
I have an amazon link in the video description
www.agf-rc.com/s-gear-set?fbclid=IwAR3JX6X93-Lg6lCbPSjf7ykeDxjhoSQEYAs0bL2yhHjVblii-YIq3N1H18s
Please tell me what IP67 means is that mean it's 67% waterproof?
IP means Ingress Protection Rating, the first number "6" means its Solid Protection Rating which range is 0 to 6, and this servo reaches level 6 so that it can completely protect the inside of the servo from dust intrusion; Second number "7" means Liquid Protection Rating which range is 0 to 8, and it reaches level 7, so that under normal temperature and pressure, when the casing is temporarily immersed in 1M deep water, it will not cause harmful effects on the normal operation of the product.
Eric nailed it with his response!
wow, 48 Kg at 3S
I found out later after this video it clears 1000 oz/in on 4s. Wow!
Are they waterproof?
Brad Kalman yes, IP67 rated
And traxxas radio....
Yep, still running the stocker on this one
i have bought this servo after watching this video but i just discover that the holes for the mounting does not perfectly fit to the base and this is not beauty.
Which car? mine lined up perfect
@@TheRCNetwork trx 4 bronco. I just orderded adjustable servo mount of yeah racing
Best sounds like more of an 8th scale or 5th scale servo, I'd love to see a crawler that really needs over 800 oz inches of torque. But I guess that's why we are in America, access is the rule
The bar has been raised in crawlers and scalers for a while now....aluminum axle housing, aluminum wheels.....they keep getting heavier and heavier with tighter tolerances. Most 1/8th scales only need 300-400 oz/in and 5th scales use a larger servo over all with 1,000+
Lol I don’t think I need a smart servo for that price.Its already a pain programming the esc and reciever
The key to this servo is running directly on 12v power from a 3s lipo. I can't tell you how many people can't figure out BEC's or have had brown out or glitching servos from weak internal BEC's in ESCs. This solves it all and gives you enough torque to choke a small donkey
How much is it?
Brad Kalman there’s a link in the video description 😃
looks beefy
It's pretty decent with a slick connection for the direct 12v