Throw the new smart 5 on em and let them eat lol 155s all day brother. Good stuff man that's what I'm shooting for and your build helped inspire me to push harder getting it done. Running one zvx15d1 currently about to get another.
I’m running 2 D1ohm zvx 15s in a 9 cube box on 2 Skar sk2500 amps strapped at 1ohm(I have stellar electrical so they take the .5 ohm a piece like a champ) in a 2017 Hyundai Sonata. I’ve had to slowly rebuild the inside of the car with birch wood and lot’s of sound deadening. Would love to compare our setups if your ever in the MD/DC area. You’re sounds pretty dope man,keep up the content.
Really got me ready to buy 2 of these and put them in a 1st gen Durango defiantly the way it’s moving air in that Tahoe I’m sure it will move more in a Durango
Awesome !! I just got same 3k and I will be running 2 12s made by Resilient Sounds wired at 0.5 ohms which will result in about 1-1.5 ohm final load after rise.
I run 2 zvx-15's on a taramps 8k in an extended cab s-10. I wish I knew what mine did on the meter but judging by yours Im pretty sure it's in the 150's sealed. Nice setup.
@@unkowntrooper1657 nothing that is posted and not much of any video. I've never really videoed anything but a friend sent me a short one of it floating his girls hair ill have to find it and post it.
Shit gettin down. But if you got the Taramps md8000.1 you would really slam. I have the skar evl 12's in a 6th order in a ext. Cab truck it did over 150 db. Just sayin try putting the power to them cause you gotta make up for impedance rise . dig the set up though. Nice.
Hey man, just so you know 2/0 welding cable is the same as 1/0 audio wire, and 4/0 welding cable is the same as 2/0 audio wire. The reason this happens is that the audio companies aren't regulated by any set standard, so they can sell a wire that would be 2/0 as "oversized 1/0". Just something to think about since I heard you talk about wire upgrades.
@@ethanr1145 appreciate that, I have 3k MD taramps so it's a little tough to find reducers small enough to fit in the power inputs, which are 4 gauge inputs.
Rp 4500, should give you more power both at one ohm u need a alt n more battery if you want to see 4500 stock alt im sure you can only get 1500 if that
That Skar RP 4500 would still put out more power than that Taramps 3K. Had both amps, you just need really good electrical for that RP 4500. Because it pulls more electrical than a regular 4500
Big 3, alternator, stronger battery, and/or a secondary battery. My next setup will be a higher output alternator and a homemade lithium battery bank on a standalone charging system dedicated to my system
hey man could you help me out i have an infiniti q50 i just want to run one 15 for right now but able to upgrade im new to this so its kinda like damn lol looks like you have alot of stuff shit sounds good asf
I’m not too familiar with infinity as far as alternator choices etc but definitely google and search on RUclips those are your 2 best options I learned a lot from forums online and other RUclipsrs.
9cu ft after displacement and tuned at 30hz. If you want complete design with cut out sheets and all I’m selling the design for $30 dm me on insta 251_bailey
There’s some factors. If you plan on running .5Ω and/or run your voltage 15-16.9 then the bass hands down. If you plan on only running to 14v and 1Ω then probably smart 3. Between 14-15v is kinda personal preference. Hope this helps.
@@Bamashiner I have a 2015 Buick lacrosse i bought 2 skar audio zvx 15 v2 but don't have a amp for my subs, I'm thinking of getting taramps md 5k or the bass 5k in suggestions?
@@cleofiesjackson1983 it all depends on your electric if you don’t or can’t charge above 16v then get a md model. Bass model is only good if you can stay at mid 16s. MD you can safely run to 12v
First one was Awolnation “Sail” probs a decaf version. Great song. If you’re bored watch the video of Jeb Corliss “grinding the crack”, I heard that song on that video for the first time. Still gives me goosebumps.
Unplug your speaker outputs turn gain all the way down, play a test tone at max volume and turn gain up until the clip light barely twitches. Best way to tune any taramps
It needs more power taramps are very power hungry and require a stout electrical system even this dual alternator lithium setup drops to 13.6 taramps are happy at a steady 14.4 that's hard to do
Nice Build! Loved dual setups.✊
Throw the new smart 5 on em and let them eat lol 155s all day brother. Good stuff man that's what I'm shooting for and your build helped inspire me to push harder getting it done. Running one zvx15d1 currently about to get another.
I’m running 2 D1ohm zvx 15s in a 9 cube box on 2 Skar sk2500 amps strapped at 1ohm(I have stellar electrical so they take the .5 ohm a piece like a champ) in a 2017 Hyundai Sonata. I’ve had to slowly rebuild the inside of the car with birch wood and lot’s of sound deadening. Would love to compare our setups if your ever in the MD/DC area. You’re sounds pretty dope man,keep up the content.
Really got me ready to buy 2 of these and put them in a 1st gen Durango defiantly the way it’s moving air in that Tahoe I’m sure it will move more in a Durango
Impressive for 2-15 👍🏾 wit a 3k nice
You getting some really good voltage bro.
Every little bit helps.
What do you have for electrical
Man that just gives me a smile.
How long did the setup last?
Just ordered 3 of these!
Heck yea bro💪🏼
What amp u going to use for 3 zvx 15s why not just get 18s like me
Awesome !! I just got same 3k and I will be running 2 12s made by Resilient Sounds wired at 0.5 ohms which will result in about 1-1.5 ohm final load after rise.
Heck yea bro I thought about changing to resilient for a lil bit but idk
If you are near Georgia, we trying to get a show in April 3
Yes that's about the simple setup I'm going for in my tahoe.
Nice setup
I somewhat have the same setup,2 12’s zvx’s and upgrading my hifonics 3k amp to a 5k taramps amp
Nice build!! Thinking of doing the same build anyway you could shoot me the dimensions on that box would be awesome thanks in advance
I run 2 zvx-15's on a taramps 8k in an extended cab s-10. I wish I knew what mine did on the meter but judging by yours Im pretty sure it's in the 150's sealed. Nice setup.
any videos bro? I have 2 vxf 15s in my s10 6th order blowtrhough on 12k and its violent as fuck does 155s easy
@@unkowntrooper1657 nothing that is posted and not much of any video. I've never really videoed anything but a friend sent me a short one of it floating his girls hair ill have to find it and post it.
Hey man how do yu I have them wired I have 2 dual 2ohms on a taramps bass 8k I need some help please
@@zabariestevens7589 all in parallel for 0.5ohm.
How would you compare the 4500 Skar Amp to the Taramps 3k?
What is your box tuned at?
How are you doing 150 on a 3K? Especially that big SUV?
does the amp ever clip at that volume ?
Thing whammin,Crammin,Slammin,Blammin
Glad I’m not the only person that keeps deodorant right there
Get the bass5k 💯
Changing my alt first the 3k is more efficient with my current setup
What was the second song
Does your zvx get hot ?
Shit gettin down. But if you got the Taramps md8000.1 you would really slam. I have the skar evl 12's in a 6th order in a ext. Cab truck it did over 150 db. Just sayin try putting the power to them cause you gotta make up for impedance rise . dig the set up though. Nice.
Do you have an actual meter run??
Anymore updates?
what was better to you in your opinion the taramps or the skar, be sure when meter next time all on passenger side.
I’m louder in the driver kick w passenger side open, and I think taramps is better.
Hey man, just so you know 2/0 welding cable is the same as 1/0 audio wire, and 4/0 welding cable is the same as 2/0 audio wire. The reason this happens is that the audio companies aren't regulated by any set standard, so they can sell a wire that would be 2/0 as "oversized 1/0". Just something to think about since I heard you talk about wire upgrades.
So if I want true 1/0 welding wire , get the 2/0 instead
@@RomaVilla Amps are made with audio cable in mind so if you want the recommended cable you should get 2/0.
@@ethanr1145 appreciate that, I have 3k MD taramps so it's a little tough to find reducers small enough to fit in the power inputs, which are 4 gauge inputs.
@@RomaVilla Jim's Machineworx makes taramps specific 1/0 adapters, but last time I saw they were out of stock. They might be back though
@@ethanr1145 I'm checking them out right now. Thanks for the tip..
Rp 4500, should give you more power both at one ohm u need a alt n more battery if you want to see 4500 stock alt im sure you can only get 1500 if that
Say it with your chest then! Shit was Beatin for sure. Curious what voltage your gain is @.
I have the 12s on a. Smart 3k
What are the small wires hooked up to your bank? And the little pack thing they go to
A balancer to make sure each cell remains charged at the same voltage.
I have 1 zvx 15 d1 at on a bass 3k and it sounds good but I guess I need another one! Lol
What electrical did you have to upgrade and what ohm are you running it at and what ohm is your sub ?
That Skar RP 4500 would still put out more power than that Taramps 3K. Had both amps, you just need really good electrical for that RP 4500. Because it pulls more electrical than a regular 4500
The rp 4500 didn’t hold up at .5Ω I have a taramps bass 5k @ .5Ω now
@@Bamashiner how you like it I’m thinking of upgrading?
@@Bamashiner what did it over heat? how does it not hold up?
I have a question, do you have them connected to 1 ohm?
No .5ohm
How do I stop the voltage from dropping
Big 3, alternator, stronger battery, and/or a secondary battery. My next setup will be a higher output alternator and a homemade lithium battery bank on a standalone charging system dedicated to my system
Do u think one taramps 3k on a skar zvx d1 15 is a good amp
Get the bass series!
I need help tuning mines🤦🏾♂️
hey man could you help me out i have an infiniti q50 i just want to run one 15 for right now but able to upgrade im new to this so its kinda like damn lol looks like you have alot of stuff shit sounds good asf
I’m not too familiar with infinity as far as alternator choices etc but definitely google and search on RUclips those are your 2 best options I learned a lot from forums online and other RUclipsrs.
Also being a sedan 1-15 is actually a good bit. If you wanna go with a dual sub setup I’d do 2-12s
What’s your box dimensions if you don’t mind telling
9cu ft after displacement and tuned at 30hz. If you want complete design with cut out sheets and all I’m selling the design for $30 dm me on insta 251_bailey
Nice…got a vid of the 150 metering?
You don't believe him. Lol.
@@ARSONISTSCAMP It’s not about belief…it’s about presenting accurate information. WHO knows if it’s accurate
@@ARSONISTSCAMP I don’t believe anything I don’t see…I’m funny like that
No new videos yet :(
Will be some coming soon
Should I get the bass 3k or smart 3k
There’s some factors. If you plan on running .5Ω and/or run your voltage 15-16.9 then the bass hands down. If you plan on only running to 14v and 1Ω then probably smart 3. Between 14-15v is kinda personal preference. Hope this helps.
@@Bamashiner bass 3k can handle 0.5ohm ?? all taramps line, only bass line can handle voltage until 17v right ?
Box specs please!
$30 on cashapp you’ll get box specs cutout dimensions and cutout sheets. Make sure to attach your email or Instagram to receive the files.
$abailey251
put the sk4500.1d on em
What is the box tune too?
30hz
@@Bamashiner I have a 2015 Buick lacrosse i bought 2 skar audio zvx 15 v2 but don't have a amp for my subs, I'm thinking of getting taramps md 5k or the bass 5k in suggestions?
@@cleofiesjackson1983 it all depends on your electric if you don’t or can’t charge above 16v then get a md model. Bass model is only good if you can stay at mid 16s. MD you can safely run to 12v
Aye how much to build me a 32hz box for a single zvx 25?
On me on insta @251_bailey
Dm*
Taramps md vs bass?
Bass! Your welcome!
their gonna be these skars so like what amp should i get
I’d get 2 zvx-12s on a Taramps md5k🤙🏼
Wait what one should I get tho if I’m running just one 15 what amp should I get their a few different models
@@Bamashiner like a 3000 watt
Would that work?
@@SuperBikeChannel yea md3k or smart 3
NVM oh it's a kick run ok I see you doing 150 lol
Id say thats more like 146db tops
Song?
The long demo was “lean 33”
First one was Awolnation “Sail” probs a decaf version. Great song. If you’re bored watch the video of Jeb Corliss “grinding the crack”, I heard that song on that video for the first time. Still gives me goosebumps.
Can I get the box specs please
Dm me on Instagram 251_Bailey it’s $25 I’ll send you my cash app or PayPal
@@Bamashiner cringe asf
My bass 3k keeps clipping and shuts off. I have xs power d1200 for the amp. No big 3 and stock alt. What is my problem. Great system 👏 👌
Unplug your speaker outputs turn gain all the way down, play a test tone at max volume and turn gain up until the clip light barely twitches. Best way to tune any taramps
It needs more power taramps are very power hungry and require a stout electrical system even this dual alternator lithium setup drops to 13.6 taramps are happy at a steady 14.4 that's hard to do
@@nickkaltsis indeed and the bass model is a 16v amp so it loves 16.5 area
By another amp. JP at down4sound has just released his JP23 for $300
@@nickkaltsis not so sure about that. I don't have the big 3 and my bass 3k and MD1800.1 are performing swell.
Soooooo no footage of the subs or box?? Lol that's the biggest part
Check out my other video🤙🏼 same setup with different amp and battery
you aren't getting more
James wade37 Kankakee