FORD FIESTA FRONT RIGHT DRIVE SHAFT CV AXLE REPLACEMENT REMOVAL
HTML-код
- Опубликовано: 21 окт 2024
- FORD FIESTA FRONT RIGHT DRIVE SHAFT CV AXLE REPLACEMENT REMOVAL MK7 ST
► Our Website: mechaniclifesty...
In this video we will demonstrate how to remove and replace front right drive shaft cv axle on Ford Fiesta MK7. The video was made on a 2015 Ford Fiesta ST front driveshaft cv axle replacement. Fiesta Repair Videos Playlist ( we will have almost 200 Fiesta Videos): goo.gl/Lu5uYN
This video might be helpful on the following models:
2008 Ford Fiesta Front Drive shaft CV Axle Replacement Removal MK7 ST
2009 Ford Fiesta Front Drive shaft CV Axle Replacement Removal MK7 ST
2010 Ford Fiesta Front Drive shaft CV Axle Replacement Removal MK7 ST
2011 Ford Fiesta Front Drive shaft CV Axle Replacement Removal MK7 ST
2012 Ford Fiesta Front Drive shaft CV Axle Replacement Removal MK7 ST
2013 Ford Fiesta Front Drive shaft CV Axle Replacement Removal MK7 ST
2014 Ford Fiesta Front Drive shaft CV Axle Replacement Removal MK7 ST
2015 Ford Fiesta Front Drive shaft CV Axle Replacement Removal MK7 ST
2016 Ford Fiesta Front Drive shaft CV Axle Replacement Removal MK7 ST
2017 Ford Fiesta Front Drive shaft CV Axle Replacement Removal MK7 ST
Products used in the video:
► Makita Impact: amzn.to/2oDldTJ
► Low Profile Fast Jack: amzn.to/2FO7a5a
► Tire Chocks: amzn.to/2qDP0wf
► WD-40 Penetrant: amzn.to/2qGI6Wj
► Dewalt Tool Set: amzn.to/2KLf3Kv
► Kobalt Pliers: amzn.to/2kb7EIv
► Screwdriver Set: amzn.to/2pvamvx
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Great job guys. You taught me how to take care of my car without having to pay someone so far.
I was looking though to find a good video on fiesta drive shaft removal and came across yours , really well made, and great to see good lighting on the work under the car, thanks for posting
I'm very new...it would be helpful if you finish by installing the new so I know if anything needs to be lubed up or anything? Also, how to fill the tranny fluid again?
I’ll give you props for draining the transmission without checking to see if you can open the fill plug first to refill the transmission
Great video showing difficult bolt removal as well. Cheers guys
Awesome video, it's so clear & explained step by step so well. Thanks guys & I'd be lost without your help👍
Hi guys, just wanted to say your work is excellent! Thank you so much for sharing your knowledge with us. Your videos are top notch. I have learned so much from you. I especially loved the bumper repair vids. Do you have a question and answer video? I'm curious about your names and the guy who never talks. Is he your dad or uncle? Keep up the great work fellas, cheers!
Thank you guys! I only changing this drive shaft because noisy bearing! CV-joints are good,not clicking at all! My Fiesta almost 300000 kms.
Thanks for showing us all the way
is it ok to just put a new one straight in? or should I also replace the seal in the transmission?
Nice job
How are your control arms dropping out so easily? When mines in full droop it won't come all the way out even though it's clearly loose and not seized.
Pregunta, para quitar el eje que dado utiliza para retirar la tuerca es un 30 mm
Excellent very helpful.
Would this be the same for an automatic
Another excellent video guys! I hope they are still around when I have to start doing stuff like this to my ST. That being said, thinking of trading in my 2015 for a 2019 MY ST since Ford is discontinuing production in the US. ☹️
Keep your 15. Much better aftermarket support for the 15.
Mike Vargas Yeah that back up camera is definitely going to kill the aftermarket support for the 19 ST. 😂
What size is that center nut on drive shaft?
32mm
so why did you replace it to begin with? the boots are not ripped? was the bearing shot?
probably noisy bearing cause it is built in the drive shaft
Che problema hai avuto per sostituirlo?avevi rumore?
Thank you guys hope it’s the same as a c max energi ! I’m think the bearing is and since it makes a jolting motion when braking harder to stop faster.
mach275 does yours make a strange noise, almost like metal on metal, when you have to brake hard going downhill? My fiesta is doing this and I can’t quite pinpoint it.
ryanf4545 just jack it up in the front and move the cv axle for excessive play. The boot closest to the motor was Holding our cv axle in place. Everything inside damaged the outer pieces so we had to buy an entire cv axle so I’d suggest checking it out before it gets worse. Either way not an expensive part.
ryanf4545 compare both cv axles for excessive play but you should know which one is making the noise when braking hard.
Hope you guys see this..... I have an 11 ford fiesta automatic, do I need to drain the transmission fluid to do that? Is it required to drain the tranny fluid for this repair?
if you dont drain there is possibility some fluid will drip down from the whole after removing drive shaft!
@@Subjohny LOL and.......... That's a bigger problem than draining the fucking transmission? Are you high?
Do you have to take out the transmission fluid?
Yes.
Great video. But why didn't you just take off the strut instead of the lower control arm? There's plenty of room to get the axle out with the control arm still attached.
Assuming you mean removing the strut from the knuckle, you will need to get the car aligned afterwards. Also, on the fiesta those bolts are torque to yield, and are not supposed to be reused (although most people do).
Exactly
Is it possible to exchange just a center support bearing?
Mine is making noise too. I am replacing the whole CV axle assembly. Were you able to replace the support bearing?
@@robertm7148 Not yet, I keep an eye on it. So far I just have a little bit of grease residue. Same amount of grease after 12 months. No noise. I would imagine that the bearing is sealed, so I am guessing that it is slowly going bad. How was you experience with changing the axle? Any tips? I will tackle this bearing later on.
@@luktish I started the job, but I was unable to loosen the ball joint with my wrenches and sockets. I am guessing I needed an impact wrench. I then decided to return the axel to my eBay seller and trade in the fiesta on a 2013 mazda5. Best of luck with replacing your axle. Let us know how it turns out for you.
I think its pressed in, so no
video skipped taking some intake pipe off didn't see how or where it was
Can't find the rest of the video 😪
How much gear oil to fill it back up?
Just make sure to drain the fluid into something clear so you can mark the level with a marker and put the exact amount that came out back into the system.
1.6 Liters is what ford recommends
Most people add 1.75-2.0 L of fluid
Easy when the shaft isnt seized into the hub........
thanks for not showing the install
Just so you know the passenger's side cv axle on ford fiesta has two different types of generations; one is from 2011- 2013 and the other is 2014- 2017; the older models have two inches longer axles
Broooooo yall need to invest in some better tools
bad video,your just showing us your taking it off your not showing us the hole job,If you notice 19 min is talking about likes and subs,the other 10 min is showing us...
Um the cv axle just doesn't pull out if the transmission!!!
That's where I'm stuck at....
Was going to add must be a c clip locking the axle in place?
And how do we fill the gearbox oil up in reverse as getting oil back in that drain plug could be an issue!
I've never seen 1 so long before
T5
Horrible video
I'm having to learn how to do this stuff I'm being forced to with no choice.