HOW TO BLEED COOLING SYSTEM ON FORD FIESTA MK7 ST
HTML-код
- Опубликовано: 27 авг 2024
- HOW TO BLEED COOLING SYSTEM ON FORD FIESTA MK7 ST
►► Ford Coolant: amzn.to/2A17aj0
In this video we will demonstrate how to bleed the cooling system on Ford Fiesta MK7. The video was made on a 2015 Ford Fiesta ST cooling system bleeding. Fiesta Repair Videos Playlist ( we will have almost 200 Fiesta Videos): goo.gl/Lu5uYN
This video might be helpful on the following models:
2008 Ford Fiesta How to Bleed Cooling System, Coolant Bleeding MK7 ST
2009 Ford Fiesta How to Bleed Cooling System, Coolant Bleeding MK7 ST
2010 Ford Fiesta How to Bleed Cooling System, Coolant Bleeding MK7 ST
2011 Ford Fiesta How to Bleed Cooling System, Coolant Bleeding MK7 ST
2012 Ford Fiesta How to Bleed Cooling System, Coolant Bleeding MK7 ST
2013 Ford Fiesta How to Bleed Cooling System, Coolant Bleeding MK7 ST
2014 Ford Fiesta How to Bleed Cooling System, Coolant Bleeding MK7 ST
2015 Ford Fiesta How to Bleed Cooling System, Coolant Bleeding MK7 ST
2016 Ford Fiesta How to Bleed Cooling System, Coolant Bleeding MK7 ST
2017 Ford Fiesta How to Bleed Cooling System, Coolant Bleeding MK7 ST
► Our Website: mechaniclifesty...
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
This video is realy eficcient👍
@@ivananguiano1787 xx
Thank you for showing where the bleed cap was. Amazing that four other videos didn't show this. Additionally, thank you for NOT including music in your video.
Guys are brilliant save me some cash here boys thank you problem here in scotland car repairs shop take advantage now with people not knowing how to do this stuff me being one of them so far you've taught me how to change the bottle and do this thanks very much
Thanks for the video. I just did this to my Ford Fiesta 1.0 ecoboost mk7.5. Exact same bleeding.
Thanks here from South Africa for another useful video you guys rock. I am reconditioning a Ford EcoSport 1.0l turbo motor, so this is useful before I start the motor.
Awesome video! My first flush I didn’t know where the bleeder was or that our cars had one
Nice video👍. One thing i like in this video is the fact that you catch the coolant coming out of the bleeder port with a bottle to put back into the reservoir; coz others just waste it on the floor.
Thank you very much, man! Because of your "instruction video" I saved $200! If there was a donation button somewhere I'd be glad to donate some$$$ for this video. Grear job!;)
Excellent instructional video as always guys. I'll be changing my radiator hoses for mountune ones soon so this will be very helpful.
Thank you was wondering the correct procedure
Thank you for your video. It really helped me a lot.
Is it the same procedure for the ford fiesta mk6 2011 not st?
Nice explanation. Thanks !
Do u know where the bleeder valve is on ford focus titanium
Hi, what size mm pipe did you use on the bleed valve please. Thanks
How did you empty your system? That's the important part.
Take the cap off the degas bottle, remove the lower radiator hose and while it’s draining, remove that little screw on the top of the radiator so the coolant comes out nice n easy
Any chance for a coolant change video in the future. (actually when do you need to bleed the cooling system? under what situations)
My Fiesta 2018 doesn't even start and the coolant just bubbles when I try to, and I noticed some water leaked into the engine oil, which the mechanic says is not through the gasket as the temperature doesn't rise more than normal. Idk what to do, I've applied a Sealant to fix any cracks, it is still the same
My question is... after you let the car cool overnight, did you adjust the coolant level? Where should the level be when cold?
Between min and max
Hi...
Does this work even if the enginenis cold? While the thermostat is closed
Hi Thanks for your videos last week thursday I did my first brake pads change, How did you change the background screen of your Ford Sync? or how do one upgrade the Sync software
Vehicle is not overheating byt when the enjin ie witched or the resevoier bottle bubbls. Tthere is iol micing when dipsrik is pulled and enjin run sm99th and no6 uusing water. What could be the probplem
Just replaces the head gasket on my fiesta but still are coming out
Could it be that I messed up the head ? It pushes the coolant out of the reservoir
Help me pleas, how to beeld cooling system on fiat strada 1600 16v.
Thank you
How to open radiator cap on a 2014 Ford fiesta
Hello really good video. Do we need to turn on the AC aircondition on full, or no? Thanks.
No, ac has nothing to do with the engine's cooling system. As he said in the video, turn on the heater so coolant flows through those pipes and removes any trapped air
Probably a dumb question, but how would i drain the system completely? Like the coolant from the inside of the engine as well. Ford switched the coolant recommended from the red to a yellow based coolant now. So i just want to completely get out the old coolant out so i dont have mixed coolant. Thanks for anyone's advice on this
The new yellow coolant is compatible with the discontinued orange coolant, so you don’t need to completely flush it out.
I personally liked the idea of having the system contain 100% yellow coolant, so I did two drain and fills in the span of one month.
It’s really not an issue if some of the old orange coolant remains in circulation; there was a technical bulletin released by Ford concerning your exact question.
I change my car gas kit i clean radiator i check fan i check leak all pipes again heating my car can u say me what the problem...
Mantab
ok!
No circulation to the engine
Is yours cars really breaking that much or you just change those parts to make videos ?
Broo can u help me
I have changed everything and still overheating
These car need upgrade radiator if you don’t change the thermostat to a 160 degrees
What else can be wrong
Having the heater blower on just makes it slower to heat up. It does nothing to help bleed the system.
The point of turning the heaters on is so that the coolant can fill the heater matrix and also remove any trapped air that maybe there. Not turning the blowers. Heaters on hot. Fully can still leave an air block.
Yeah pretty standard on any car to turn on the heater to remove any air in the heater core
@@mnl493x Heater hot, yes, blowers on ? Pointless and as I said, takes longer to heat engine and get thermostat open.
@@fredflintstone2077 so your saying it’s pointless too have heaters on full blast on hot. Because it takes longer too warm up? I’d rather wait a bit longer for it too warm up and make sure there’s no air trapped in the heater matrix. 🤦♂️I give up. Fab vid but you do it your way were car warms up quicker yeh🙄
@@mnl493x The blower makes zero difference so what is the point? It is totally illogical. Maybe you need to better understand how a heater works. The coolant is heated by the engine and circulates around the cooling system. A heater matrix, which is like a small radiator, is included in this circuit. There is different types of system and valves, some bypass the water flow away from the heater matrix, other have a flap that covers it. As long as the heater control is set to hot, water flows through the heater matrix. Putting the blower on simply blows heat from the heater matrix into the car. The more heat it blows, the longer it takes for the engine thermostat to open and for the system to bleed. Having the blower on is actually counter productive.