Another Common Reason Why Washer Doesn't Drain and Spin: ruclips.net/video/KmPlBZ5nT1Q/видео.htmlsi=KxbKm63kwkD9YSqS 10 Most Common Problems With Laundry Washing Machines: ruclips.net/video/lC5eqysbdsk/видео.html Kenmore/Whirlpool Common Problem: ruclips.net/video/gSLBiHx9VC0/видео.htmlsi=NLUAc6pIm-q9a-oS What Appliance Brand is Best: ruclips.net/video/ddy06-ssC8w/видео.htmlsi=beQ5I-s18LBEu-5m
@wordofAdviceTV When I turn on my GE washer after reset the water start to fill the load at the same time the water just come out through the drain. Is that because of the water pump valve that are not close. Please advise me. Thanks.
THANK YOU!!!!!!!! My sister, who lives 90 mi from me, called and said her clothes were soaked, water still in washer. She did not need this issue since her husband passed a week ago and she now lives by herself. After watching 5 videos concerning this problem, I was ready to take a 2 hr drive, remove the enclosure from the washer and remove the obstical from her pump. UNTIL, watching your video. I called her, she did what I said, washer working great. Thank you, thank you, thank you.
Something here I was about to sub pump out the water of my mother's washing machine then I seen this video who would of thought to lift the lid 6 times in 12-30 sec an it would reset. Sorry for your family's loss by the way. God bless
My nephew and I just spent 3 hours of our lives we will never get back. The level of frustration we both experienced is unimaginable. I was looking at buying a new washer online when somehow, by some divine intervention, your video showed up. I tried this. IT FREAKIN WORKED! Thank you from the bottom of my heart for this video.
I thought you were being funny too. The thing quit. On a dice roll, I tried it on a feisty ten year old kenmore 400 with parts I replaced earlier. A watery putrid experience I dreaded going through again. I was about to go after the pricey cycle selector and/or the fuse until I just tried this expecting nothing. It worked. Im listening to the washer right now going through its paces. No repairman in the history of repairmen has ever shared this. They will say its a big job and then when you're not looking , they will reset it and charge you. You kicked over a serious cow sharing this. Thank You in public.
We have these washers at the apartment complex where I do maintenance work. Your video is going to make me look like an appliance repair genius to the Property Manager one of these days. I've already put into use lots of knowledge you've shared, when performing HVAC work orders. I'm sure you have been told this a zillion times, but I want to say it again, You are a gifted teacher! Thank you very much and Best Wishes to You and Yours!
After watching 20 other videos and troubleshooting everything I could think of, I was ready to give up and buy another washer. I figured it was the electronic control, but could find no schematic or troubleshooting info. I searched one last time and found your video. It worked! It's been a rough weekend. My water heater circuit board blew yesterday and I spent the day replacing the heater. You saved me a lot of time , money and aggravation. Thank you!
I had the repair guy here (with DECADES of experience...) and he told me I needed a new timer. He was going to order it and make a second trip out to my house (30+miles) to install it. I found this amazing video and it worked like a charm! Saved me around $250 at least. It happens when my washer spins an unbalanced load. THANK YOU!!! PS I cannot believe the repair guy didn't know this!
One more to report this fix worked with deep thanks to Word of Advice TV! Had my washer completely apart - spent an entire afternoon fighting with it. Thought the lid switch was the cause but the problem came back after running a load of bathroom towels - deducted it was too heavy a load and the unbalanced load shut off was happening. Found very little online about this problem and was lost. Had no idea how to reset the washer until I saw this video. Saved me another afternoon looking for a mechanical problem that was electronic. Knowledge is power.
Thank you. I just tried this with my 5kg Pinnacle washing machine and it worked! I was already panicking about what to do, since I stay alone. RUclips has really been saving my life these days
OMG, it WORKED!!! Thank you!!! I was not looking forward to buying a new washer. May God Bless you with plenty of money and knowledge to help us out! Thanks again.
Thank you so much! My new GE washer/dryer combo wouldn’t drain after 3 attempts. In desperation, I tried your method. I couldn’t pull out the heavy machine so I turned off the breaker. Hallelujah! The machine went through the drain and spin cycle as it should. So grateful and blessed!
I also have a GE washing machine and I just washed them this video, completed all the steps you said to do. My washer has not been spinning the entire week mind you. I followed the steps and to my surprise, my washer is happily spinning once again! Thank you so much for saving me a lot of money!!! You are awesome! Today’s date is December 20, 2019 and you are my appliance hero
Heck yeah! Because we cannot afford a replacement BUT with tour TIP, got it spinning. That’s a relief!! Everyone is happy & my hubby was surprised I got it working again 😂 I told him I just RUclipsd our problem & someone had a solution & worked out perfect 👌 Thank you so much! Merry Christmas 🎄
I have to tell you this is the quickest fix ever. If you have a husband like mine who forgets things in his pockets and has to unplug machine ( which completely throws it into a messed up mode) it will not run. Follow his instructions b4 doing all the diagnostic stuff and wasting LOTS of your time. Good luck
This worked for us! I laundered heavy duty items causing an uneven load and the next set of wash was sopping wet when I went to put the clothes in the dryer. We tried lots of things and were about to give up and face a repair bill or buy a new machine. My husband found this video and like magic, we’re back in business! Thank you!
You were sent from heaven! My agitator stopped working and I just knew I was probably going to have to shell out $500 for someone to fix it. All other videos were take it apart and fix it yourself. I came across yours and thought no way, but tried it anyway. IT WORKED!!! Please give me an address or something where I can send you something to show my appreciation. God bless you!
Your advice worked like a charm. My Amana washing machine was beyond warranty when it stopped working. I was so disheartened and contemplated taking it to a professional repair shop and paying through the nose for the privilege. I watched your video, followed the instructions and it's back up and running like nothing ever happened. THANK you! Jim
No way!!! It worked!!! I thought that was way too easy to possibly be true, but you saved me probably hundreds of dollars on getting a repair person. Thank you!!!
Omg!!!! You are amazing! I been agonizing over my kenmore washer for 3 days. I watched your video about simply unplug machine and then replugvand lift and close lid 6 times. IT WORKED!! My washer was going through all the cycles but it was only agitating for about 1 minute during each wash and rinse cycle. But this simple process ofvopen and close lid worked. My washer is preforming as normal now. Thank you so much! I can cancel my repair call, that was going to cost about $125 just for them to knock on my door, then parts and labor also.
Thank YOU.. from the bottom of my heart.... thought I was going to have to dish out hundred of dollars to buy a new one washer.. but did exactly what you said... 12 seconds to do the 6 repetitions .. and VOILA ! :).. it worked .. thank you, you are the man !
I want to thank you for sharing this information. I had washed out two pillows and on the final spin, it stopped. I used your technique and trust me, it really worked.
Shhhh!! I told my boy friend that I took it all apart and fixed it. Lol. I’m so happy it worked. Your video probably put a few crooked repair guys out of business. Thank you for sharing that.
Can't believe it. I have a Kenmore 800 Series washer that would not turn on this morning. Worked fine yesterday so I thought I'd give this reset technique a try and it worked. Canceling my repair appt now!!!!! Thank you for saving me $$$.
This works. My grandma kept complaining to me that her washer didnt work, so i opened and closed washer lid on her head a bunch of times real hard and now shes doesnt complain anymore. Problems solved, thanks ricky.
You saved my sanity, every thing I looked up said it was a balance problem and was out of level; worked on that for an hour. Found your video and it only needed to be reset. Thank you
This is so crazy. At first I was Thinking this can't be true this guy must be pulling our legs, But low and behold it worked! You saved me a lot of money bud. Thank you, thank you, thank you!!!
bravo, bravo - all fixed just by adjusting the lid. and here i am shopping/browsing online for a $200.00 repair or getting a new cheap washer for over $450.00 thank you - you are the best!!!!
Are you aware that today you just saved me a heap of money having to book a service call. I have a Kenmore top-loader and it's 25 years old. I followed your instructions exactly and it worked like magic. Thank you so very much. Thumbs up . . . that's for sure. Darryl
@@rogerbec5766 Hi Roger, As my washing machine is 25 years it has no bells or whistles. . . very basic--two buttons (water level/temperature choices) and then the dial for washing options. Cheers! Darryl
Wow! Thanks so much. A good friend of mine had a Kenmore top load model 110 that would not agitate or spin. It would fill with water, sit for a few seconds, add more water, sit again, and never agitate. I tried this fix, and it solved the problem. Thanks again.
I just want to say thank you! We are preparing for a trip and of course today if all days it stops working. I’m so glad I can across your video and you showed me the trick. It worked instantly. You saved me from calling a repair person, on a weekend, last minute and spending a ton of money. My family says thank you! ☺️
THANK YOU THANK YOU THANK YOU. I searched for help with this problem and at first watched another video of my Same Washer, with the Same humming symptom and no agitation. They would have had me troubleshooting and repairing/replacing the motor. Now instead I’m washing the clothes and won’t need to shopvac all the water out of the machine and find another place to do laundry while I spend hundreds of dollars I don’t have. THANK YOU AGAIN!!
i have an amana washer and stop spinning..i looked at about a dozen videos on youtube with my brand of washer and figuring it out UNTIL i saw this video!! i followed your instructions and the my damn washer is working!! love this video
Just so we're absolutely clear, this method only applies to GE top load washers utilizing the inverter driven motor. Your Amana washer does not have the magnetic lid switch nor does it have an inverter board. This technique does not "reset" your washer, regardless what is said in the video.
I am so grateful for this video!! I was stressing about my washer, the hassle and cost of ordering a new one, what to do with laundry til I get one, disposing the old one…. This video fixed my washer! Thank you! Thank you! Thank you!
Had this same problem on our brand new washer, several times. I was ready to return it. My husband did a once over on it, including the two different reset options. Come to find out, the outlet hose connected on the bottom back of machine was crimped/pinched. Bought a new hose and it's worked perfect ever since! Hope this helps others avoid the aggravation.
Haha awesome, just did this for my Kenmore and it worked, after thinking I had to tear it down I looked up a video about the spin cycle not working, one guy talked about trying it on other speeds or duty cycles, tried it on heavy rather than normal, the spin worked, then found your video, did the reset procedure and yippy! Everything is good again, thanks man!
WOW! Can't believe it worked! Mine was a GE Washer gtw330ask0ww, it's got all kinds of error code checking etc. that is very complicated. I tried this reset method and it worked! Men, tell your women/kids you cannot fill these washers with huge blankets etc. My fiancé caused the washer to fail by loading up a massive blanket and then even after I got lucky and got the washer up and running again she says "great now I finish this blanket" NO!!! Go do them at a laundromat. I pulled that blanket out, it was about 70lbs soaked with water. The parts on washers will fail if you keep doing massive loads. I'm lucky this fix worked, it could have been much worse. Tell them to not be lazy and drive down to laundromat other wise we men have to spend money for no reason fixing broken washers because of laziness.
washing a blanket and sheet and the sheet got COMPLETELY tangled around the agitator. had to get it all loose but then the washer wouldn’t spin, drain, nothing. tried this and IT ACTUALLY WORKED!!!!!!!!!!! THANK YOU SO MUCH!
Thank you so much! Changed the washer lid cuz it rusted. That was easy part. Then the washer didn't work...never even noticed the magnet. Took the magnet from the old lid and installed it in the new lid. Plugged the washer back in, opened the lid six times and it worked!!! Super psyched!! Thanks again!
Thank you so much!! I haven't used my washer in months, I've been going to the laundromat. This worked for us! I'm finally able to do clothes at home again. For anyone wondering, this worked great on my Whirlpool top loader
Mines is a top loader too!! It very aged but still works like a charm I just tried his method and I’m waiting to make sure it goes through!! Wish me luck 🍀
Man you just saved me so much time and money. I thought I was going to have to call in a repair man and spent countless hours looking at other youtube videos trying to find how to fix my problem. Your video solved my problem in less than 5 minutes. THANK YOU
July 2023 I found your video in desperation. Agitator was fine. Just no spinning leaving clothes more than soppy wet. My washer is a very old Kenmore. Followed your directions one time and the spin cycle actually worked again. Thanks for sharing this.
We have an Amana washing machine that filled with water and just stopped. While I didn't use your video, I did find a web site that had similar instructions and it solved the issue. Got lucky because there are several other issues that could cause the same symptom. Saved your video for future use.
Just wanted to say thank you! My washer stopped working and I just tried your method and it worked!! Not all heroes where capes lol ♥️I was so upset because I did not want to buy a new washer
After replacing the Lid Switch (because the washer wasn't draining), all of a sudden the agitator wasn't working and the machine wasn't spinning. I thought: "For crying out loud - WHAT NOW?" Your solution may seem to some of us to be too simple to have any chance of working. But it certainly DOES work! If only everything else had such a simple solution!
Thank you! This worked on my hotpoint. I'm super thankful. I have a spinal injury and was not able to work on it and was gonna call a repair man. I was able to do it myself! 🙂
This worked for my Whirlpool!! Thanks sooo much. Was already looking for a replacement but checked RUclips just in case and boy you saved me 700 bucks. Thanks!!!
This worked!! I just bought a new washer last year and Sunday I went to do laundry and my washer would start to fill, then stop. It wouldn't spin when draining and would just stop. I didn't even think of resetting it, I was getting ready to call for repair when I googled the symptoms and "reset washer" kept popping up. Thank god this video popped and honestly I thought it was crap, but it worked!
Thank You so much Sir. This solved my problem. After spending like two hours trying to figure out what was causing the washer not to work, I came across your video and did exactly what you did on the video and let me tell you it worked right away!! Again thank you!!
I went through y videos and 2 hours of research and no one said to unplug and do the lid trick. Worked perfect and I thought I'm estate washer was too old to have this feature. Thanks 👍👍👍👍
Thank you so very much! I seriously want to send you a handwritten thank you card in the mail. I cannot believe this worked. You saved me from having to take apart the agitator (which was my next step). You saved a whole load of sopping wet towels and my time. Thank you!
THANK YOU!!! All other videos show taking the washing machine apart and doing a bunch of repairs but I found your video, tried this and now my laundry is up and running again! THANK YOU THANK YOU!! :D
Omg thank you so much. My husband just replaced the cutler on my washer. I went to use it this morning and it wasn't spinning. Found your video and it fixed my washer. 😄
Thank you!!!! You saved the day, not with ONE washer but with TWO totally unrelated washers that happened to land in the same house. Crazy that they both had this same problem before I even used them (they were used). This was very appreciated!
I can't believe this worked. I have a Frigidaire stackable that drained but didn't spin I took apart the drain pump expecting to find something clogging it but found nothing. I was beginning to despair when I found your video. THANK YOU THANK YOU!
So great! My issue was definitely was an uneven load, but the motor already had locked. Ive been having issues with my Mabe for more than a year,,, and 9 out of 10 times it is the sensors locking the motor. Thank you for taking the time to make this video!!!!!
You are literally saving others with this video! Thank you so much! It worked on my elderly whirlpool. I am so grateful to have found your video. Thank you for sharing and caring lol If I ever become wealthy, I am going back to my saved videos and sending you a huge check. So serious ! lol Thank you so much!
Worked like a charm on a 15 year old Kenmore top loader. No lights or anything fancy, just knobs. I just followed the steps not knowing if anything was reset since I have no lights on the machine. But I started the washer and it started to fill like normal! My issue was that only the Handwash setting was working properly. Any other setting would immediately start spinning as the washer was filling. So when it came time for the last spin, it was already set to “off” by then and the clothes were left sopping wet and not fully clean. This was exactly what I needed. I alone take care of my brain damaged and paralyzed mother with ZERO state assistance (thanks to Texas being a red state that hates poor people). So for us to have a broken washing machine would’ve taken 100% donations to get it fixed or replaced. We live paycheck to paycheck and I’m out of work and can barely afford her meds, diapers, etc. We ALL need to share this video and make this guy rich for all the money he’s saved us!!! THANK YOU FOR HELPING YOUR PEOPLE!!!
I have a total different brand washer and I did not think this would work, but it did, like magic! thank you for posting this, saved me time, money and headache.
Oh my goodness a week ago my washer quit draining, read only about unplugging for 5 minutes did that work. A week later same thing unplugging didn't help this time, somehow came across this video did the lid clicking working thank you heavenly Father for helping me find this video.
God bless you sir! You really saved my bacon. Yes this worked! My washer worked fine the last time I used it. When I went to wash clothes this week -- nothing. No lights. No response from the controls. I turned it off at the breaker, let it sit for a while, then turned it back on. The yellow "sensing" light was on and blinking, otherwise still nothing. Later, I found this video and am now up and running. If you use YT the way I do, you'll want to know this about my washer: 2019 Maytag "Commercial Technology" high efficiency top loader, Model MVWC565FW1 (5 knobs across the panel, looks like the Centennial Series, probably an analog of some Whirlpool model as well)
WoW!!! Brilliant video. I did all sorts of troubleshooting and nothing worked. Fortunately, I came across this video. I did exactly what you demonstrated and now my Whirlpool is working. I could not believe it was so easy to reset such error code. Sir, please keep on making good videos. Stay safe. Respect and blessings.
This just worked for me. You just saved my landlord a headache she didn't need. I desperately did not want to tell her the washer wasnt functioning properly. I figured it was a pump. Amazing video ❤
Thank you so much. This actually worked. The agitator function wouldn't work. Checked the agitator parts and they were all fine. Thought it was the belt but luckily i found this video first, tried it, loaded up the machine and it worked. Thank you, saved us from spending money.
My washer was overfilling about 4 inches above the clothes which lead to UL code constantly. This totally helped. Another suggestion someone said was to run an Affresh cleaning cycle (Bravos 300) which would start and change from an hour to 4 minutes shortly after beginning. Both are working perfectly now. Thank you very much.
Thank so much! My Whirlpool washer stopped spinning after my wife had washed some extra heavy blankets. This fixed it! I was already looking to buy another washer!
Dude. You rule. Needless to say I fixed my Kenmore series 100 washer. While I was thinking it might be the capacitor or something in the motor or the pump or all these other things they mentioned in other videos your 10 second solution did it! Thanks!
Thank you! Thank you. After an appliance repair person said it was too difficult for him to even come look at.... I did it and it worked ... He probably would have charged me $400-$500 to "fix it" Thank you so much!!!!!!!!!!
Thank you and blessings on you and yours. My husband is disabled and I have to fix everything and without you I would have most likely been on my way to the washeteria and the repairman on his way to my house.
Thank you SO much!!! I've been trying to figure this out for over an hour. Finally I googled it and your video came up, this trick worked like a charm. THANK YOU AGAIN FOR SAVING MY SANITY!!!
Omg this is the first time this happened to me and I was stressing thinking we would need to buy a new washer! I have the conservator washer for about a year already & haven’t had any problems with it I know it’s a very low end washer but I’m happy this worked for me thank you!
My washing machine didn't work for over a YEAR, my gut told me it was something simple so I kept it there and tried EVERYthing, then found this video and it was this...wow. I never even knew a washer could be reset, like WHY don't they tell you this in the manual? or when you call the service number? It makes me wonder how many perfectly good washing machines have been thrown out and replaced because of something as simple as this 🤔😮
I have an Admiral top loader washer, it stopped working this morning, would not adjuster or spin, it filled with water and that it, ran across your video and gave it a shot, it worked, now my washing machine is washing. Thanks
I took my machine apart, everything was good, and had parts ready to replace things if needed. You solved my whole problem!! Quick and easy! Now I have to figure out how to get the cabinet back on like it is supposed to go, lol. TY!
Another Common Reason Why Washer Doesn't Drain and Spin:
ruclips.net/video/KmPlBZ5nT1Q/видео.htmlsi=KxbKm63kwkD9YSqS
10 Most Common Problems With Laundry Washing Machines:
ruclips.net/video/lC5eqysbdsk/видео.html
Kenmore/Whirlpool Common Problem:
ruclips.net/video/gSLBiHx9VC0/видео.htmlsi=NLUAc6pIm-q9a-oS
What Appliance Brand is Best:
ruclips.net/video/ddy06-ssC8w/видео.htmlsi=beQ5I-s18LBEu-5m
OMG it works
Word of Advice TV🏆▶️
@wordofAdviceTV When I turn on my GE washer after reset the water start to fill the load at the same time the water just come out through the drain.
Is that because of the water pump valve that are not close. Please advise me. Thanks.
Does not spin
THANK YOU!!!!!!!! My sister, who lives 90 mi from me, called and said her clothes were soaked, water still in washer. She did not need this issue since her husband passed a week ago and she now lives by herself. After watching 5 videos concerning this problem, I was ready to take a 2 hr drive, remove the enclosure from the washer and remove the obstical from her pump. UNTIL, watching your video. I called her, she did what I said, washer working great. Thank you, thank you, thank you.
Something here I was about to sub pump out the water of my mother's washing machine then I seen this video who would of thought to lift the lid 6 times in 12-30 sec an it would reset. Sorry for your family's loss by the way. God bless
My nephew and I just spent 3 hours of our lives we will never get back. The level of frustration we both experienced is unimaginable. I was looking at buying a new washer online when somehow, by some divine intervention, your video showed up. I tried this. IT FREAKIN WORKED!
Thank you from the bottom of my heart for this video.
You're very welcome! Glad it worked for you! Happy laundry 😄
@Mia L It recalibrates the invertor on the motor. Doesn't always fix
@@RemnentPlays how.?
@@augustineuchendu2814 Dont know the specifics, its just how its written in the machine code. It only works on old GEs.
I thought you were being funny too. The thing quit. On a dice roll, I tried it on a feisty ten year old kenmore 400 with parts I replaced earlier. A watery putrid experience I dreaded going through again. I was about to go after the pricey cycle selector and/or the fuse until I just tried this expecting nothing. It worked. Im listening to the washer right now going through its paces. No repairman in the history of repairmen has ever shared this. They will say its a big job and then when you're not looking , they will reset it and charge you. You kicked over a serious cow sharing this. Thank You in public.
We have these washers at the apartment complex where I do maintenance work. Your video is going to make me look like an appliance repair genius to the Property Manager one of these days. I've already put into use lots of knowledge you've shared, when performing HVAC work orders. I'm sure you have been told this a zillion times, but I want to say it again, You are a gifted teacher! Thank you very much and Best Wishes to You and Yours!
After watching 20 other videos and troubleshooting everything I could think of, I was ready to give up and buy another washer. I figured it was the electronic control, but could find no schematic or troubleshooting info. I searched one last time and found your video. It worked! It's been a rough weekend. My water heater circuit board blew yesterday and I spent the day replacing the heater. You saved me a lot of time , money and aggravation. Thank you!
EXACTLY!👍🏾
I had the repair guy here (with DECADES of experience...) and he told me I needed a new timer. He was going to order it and make a second trip out to my house (30+miles) to install it. I found this amazing video and it worked like a charm! Saved me around $250 at least. It happens when my washer spins an unbalanced load. THANK YOU!!! PS I cannot believe the repair guy didn't know this!
he wanted to make money from you
I bet the repairman DID know the trick!
@@motoblur6 Follow up.... I DID end up having to replace the timer. 🙄 But had a friend do it for much less, wasn't that hard.
One more to report this fix worked with deep thanks to Word of Advice TV! Had my washer completely apart - spent an entire afternoon fighting with it. Thought the lid switch was the cause but the problem came back after running a load of bathroom towels - deducted it was too heavy a load and the unbalanced load shut off was happening. Found very little online about this problem and was lost. Had no idea how to reset the washer until I saw this video. Saved me another afternoon looking for a mechanical problem that was electronic. Knowledge is power.
Thank you. I just tried this with my 5kg Pinnacle washing machine and it worked! I was already panicking about what to do, since I stay alone. RUclips has really been saving my life these days
OMG, it WORKED!!! Thank you!!! I was not looking forward to buying a new washer. May God Bless you with plenty of money and knowledge to help us out! Thanks again.
Thank you so much! My new GE washer/dryer combo wouldn’t drain after 3 attempts. In desperation, I tried your method. I couldn’t pull out the heavy machine so I turned off the breaker. Hallelujah! The machine went through the drain and spin cycle as it should. So grateful and blessed!
I also have a GE washing machine and I just washed them this video, completed all the steps you said to do. My washer has not been spinning the entire week mind you. I followed the steps and to my surprise, my washer is happily spinning once again! Thank you so much for saving me a lot of money!!! You are awesome! Today’s date is December 20, 2019 and you are my appliance hero
That's what I love to hear! :) Glad you were able to get the washing machine working again! Thank you for leaving a nice comment, happy laundry!
Heck yeah! Because we cannot afford a replacement BUT with tour TIP, got it spinning. That’s a relief!! Everyone is happy & my hubby was surprised I got it working again 😂 I told him I just RUclipsd our problem & someone had a solution & worked out perfect 👌 Thank you so much! Merry Christmas 🎄
I have to tell you this is the quickest fix ever. If you have a husband like mine who forgets things in his pockets and has to unplug machine ( which completely throws it into a messed up mode) it will not run. Follow his instructions b4 doing all the diagnostic stuff and wasting LOTS of your time. Good luck
This worked for us! I laundered heavy duty items causing an uneven load and the next set of wash was sopping wet when I went to put the clothes in the dryer. We tried lots of things and were about to give up and face a repair bill or buy a new machine. My husband found this video and like magic, we’re back in business! Thank you!
You were sent from heaven! My agitator stopped working and I just knew I was probably going to have to shell out $500 for someone to fix it. All other videos were take it apart and fix it yourself. I came across yours and thought no way, but tried it anyway. IT WORKED!!! Please give me an address or something where I can send you something to show my appreciation. God bless you!
Your advice worked like a charm. My Amana washing machine was beyond warranty when it stopped working. I was so disheartened and contemplated taking it to a professional repair shop and paying through the nose for the privilege. I watched your video, followed the instructions and it's back up and running like nothing ever happened. THANK you! Jim
No way!!! It worked!!! I thought that was way too easy to possibly be true, but you saved me probably hundreds of dollars on getting a repair person. Thank you!!!
Went through all kinds of tests, took apart the machine; only to catch this video: it worked! lol, who would have thought. Thank you friend.
Omg!!!! You are amazing! I been agonizing over my kenmore washer for 3 days. I watched your video about simply unplug machine and then replugvand lift and close lid 6 times. IT WORKED!! My washer was going through all the cycles but it was only agitating for about 1 minute during each wash and rinse cycle. But this simple process ofvopen and close lid worked. My washer is
preforming as normal now. Thank you so much! I can cancel my repair call, that was going to cost about $125 just for them to knock on my door, then parts and labor also.
Thank YOU.. from the bottom of my heart.... thought I was going to have to dish out hundred of dollars to buy a new one washer.. but did exactly what you said... 12 seconds to do the 6 repetitions .. and VOILA ! :).. it worked .. thank you, you are the man !
I want to thank you for sharing this information. I had washed out two pillows and on the final spin, it stopped. I used your technique and trust me, it really worked.
Shhhh!! I told my boy friend that I took it all apart and fixed it. Lol. I’m so happy it worked. Your video probably put a few crooked repair guys out of business. Thank you for sharing that.
Can't believe it. I have a Kenmore 800 Series washer that would not turn on this morning. Worked fine yesterday so I thought I'd give this reset technique a try and it worked. Canceling my repair appt now!!!!! Thank you for saving me $$$.
This actually worked. For anyone reading this.
Thank you.
This works. My grandma kept complaining to me that her washer didnt work, so i opened and closed washer lid on her head a bunch of times real hard and now shes doesnt complain anymore. Problems solved, thanks ricky.
You saved my sanity, every thing I looked up said it was a balance problem and was out of level; worked on that for an hour. Found your video and it only needed to be reset. Thank you
It works! We have a GE profile. Not even a year old, stopped spinning. Now the motor is reset. Thank you so much!
I watched this video and thought that it was kind of silly, but then thought I might as well try, and it worked. Thank you!
This is so crazy. At first I was Thinking this can't be true this guy must be pulling our legs, But low and behold it worked! You saved me a lot of money bud. Thank you, thank you, thank you!!!
bravo, bravo - all fixed just by adjusting the lid. and here i am shopping/browsing online for a $200.00 repair or getting a new cheap washer for over $450.00 thank you - you are the best!!!!
Are you aware that today you just saved me a heap of money having to book a service call. I have a Kenmore top-loader and it's 25 years old.
I followed your instructions exactly and it worked like magic. Thank you so very much. Thumbs up . . . that's for sure.
Darryl
Is you washer mechanical or the newer digital style? Didn't know it could work on older mechanical dial type washers.
@@rogerbec5766 Hi Roger,
As my washing machine is 25 years it has no bells or whistles. . . very basic--two buttons (water level/temperature choices) and then the dial for washing options.
Cheers!
Darryl
@@50Street21 - Working on my 15 year old Maytag to replace the clutch. The new m'chines aren't what they used to be. Thanks for the info.
Wow! Thanks so much. A good friend of mine had a Kenmore top load model 110 that would not agitate or spin. It would fill with water, sit for a few seconds, add more water, sit again, and never agitate. I tried this fix, and it solved the problem. Thanks again.
DUDE UR A ROCKSTAR!!! Just tried it on my old Crosly model & IT WORKED!!! Thank u so much for sharing!!
I just want to say thank you! We are preparing for a trip and of course today if all days it stops working. I’m so glad I can across your video and you showed me the trick. It worked instantly. You saved me from calling a repair person, on a weekend, last minute and spending a ton of money. My family says thank you! ☺️
THANK YOU THANK YOU THANK YOU. I searched for help with this problem and at first watched another video of my Same Washer, with the Same humming symptom and no agitation. They would have had me troubleshooting and repairing/replacing the motor. Now instead I’m washing the clothes and won’t need to shopvac all the water out of the machine and find another place to do laundry while I spend hundreds of dollars I don’t have. THANK YOU AGAIN!!
i have an amana washer and stop spinning..i looked at about a dozen videos on youtube with my brand of washer and figuring it out UNTIL i saw this video!! i followed your instructions and the my damn washer is working!! love this video
Just so we're absolutely clear, this method only applies to GE top load washers utilizing the inverter driven motor. Your Amana washer does not have the magnetic lid switch nor does it have an inverter board. This technique does not "reset" your washer, regardless what is said in the video.
I am so grateful for this video!! I was stressing about my washer, the hassle and cost of ordering a new one, what to do with laundry til I get one, disposing the old one….
This video fixed my washer!
Thank you!
Thank you!
Thank you!
Had this same problem on our brand new washer, several times. I was ready to return it. My husband did a once over on it, including the two different reset options. Come to find out, the outlet hose connected on the bottom back of machine was crimped/pinched. Bought a new hose and it's worked perfect ever since! Hope this helps others avoid the aggravation.
Haha awesome, just did this for my Kenmore and it worked, after thinking I had to tear it down I looked up a video about the spin cycle not working, one guy talked about trying it on other speeds or duty cycles, tried it on heavy rather than normal, the spin worked, then found your video, did the reset procedure and yippy! Everything is good again, thanks man!
Thank you ! I got it to work after doing that several times and giving the drum a push start.Saved me about $10,000.00 My washer is 17 years old.😊
WOW! Can't believe it worked! Mine was a GE Washer gtw330ask0ww, it's got all kinds of error code checking etc. that is very complicated. I tried this reset method and it worked!
Men, tell your women/kids you cannot fill these washers with huge blankets etc. My fiancé caused the washer to fail by loading up a massive blanket and then even after I got lucky and got the washer up and running again she says "great now I finish this blanket" NO!!! Go do them at a laundromat.
I pulled that blanket out, it was about 70lbs soaked with water. The parts on washers will fail if you keep doing massive loads. I'm lucky this fix worked, it could have been much worse. Tell them to not be lazy and drive down to laundromat other wise we men have to spend money for no reason fixing broken washers because of laziness.
washing a blanket and sheet and the sheet got COMPLETELY tangled around the agitator. had to get it all loose but then the washer wouldn’t spin, drain, nothing. tried this and IT ACTUALLY WORKED!!!!!!!!!!! THANK YOU SO MUCH!
Thank you so much! Changed the washer lid cuz it rusted. That was easy part. Then the washer didn't work...never even noticed the magnet. Took the magnet from the old lid and installed it in the new lid. Plugged the washer back in, opened the lid six times and it worked!!! Super psyched!! Thanks again!
Thank you so much!! I haven't used my washer in months, I've been going to the laundromat. This worked for us! I'm finally able to do clothes at home again. For anyone wondering, this worked great on my Whirlpool top loader
Mines is a top loader too!! It very aged but still works like a charm I just tried his method and I’m waiting to make sure it goes through!! Wish me luck 🍀
Man you just saved me so much time and money. I thought I was going to have to call in a repair man and spent countless hours looking at other youtube videos trying to find how to fix my problem. Your video solved my problem in less than 5 minutes. THANK YOU
Fantastic! You just saved me $2 grand as we were about to buy a new washer/dryer. Thank You !!!!!
July 2023 I found your video in desperation. Agitator was fine. Just no spinning leaving clothes more than soppy wet. My washer is a very old Kenmore. Followed your directions one time and the spin cycle actually worked again. Thanks for sharing this.
Thank you!! Literally spent more time watching this video than fixing my washer. Worked perfectly!!
We have an Amana washing machine that filled with water and just stopped. While I didn't use your video, I did find a web site that had similar instructions and it solved the issue. Got lucky because there are several other issues that could cause the same symptom. Saved your video for future use.
Just wanted to say thank you! My washer stopped working and I just tried your method and it worked!! Not all heroes where capes lol ♥️I was so upset because I did not want to buy a new washer
After replacing the Lid Switch (because the washer wasn't draining), all of a sudden the agitator wasn't working and the machine wasn't spinning. I thought: "For crying out loud - WHAT NOW?" Your solution may seem to some of us to be too simple to have any chance of working. But it certainly DOES work! If only everything else had such a simple solution!
Thank you! This worked on my hotpoint. I'm super thankful. I have a spinal injury and was not able to work on it and was gonna call a repair man. I was able to do it myself! 🙂
OMG, it worked. I was ready to buy a new one but due to the storm, delivery would take 2 weeks. Thanks for saving me money
THANK YOU!!! I watched several videos and none of them mentioned this. Your trick fixed my washer.
Just used this tip for our Admiral top load washer. 2nd wash back from vacation and it stopped spinning. .thought I was in big trouble. Thank you!!
This worked for my Whirlpool!! Thanks sooo much. Was already looking for a replacement but checked RUclips just in case and boy you saved me 700 bucks. Thanks!!!
Awesome! Glad to hear it worked for you! Thank you for leaving a comment! Happy laundry ;)
I'm trying this
This worked!! I just bought a new washer last year and Sunday I went to do laundry and my washer would start to fill, then stop. It wouldn't spin when draining and would just stop. I didn't even think of resetting it, I was getting ready to call for repair when I googled the symptoms and "reset washer" kept popping up. Thank god this video popped and honestly I thought it was crap, but it worked!
Thank You so much Sir. This solved my problem. After spending like two hours trying to figure out what was causing the washer not to work, I came across your video and did exactly what you did on the video and let me tell you it worked right away!! Again thank you!!
I went through y videos and 2 hours of research and no one said to unplug and do the lid trick. Worked perfect and I thought I'm estate washer was too old to have this feature. Thanks 👍👍👍👍
Thank you so very much! I seriously want to send you a handwritten thank you card in the mail. I cannot believe this worked. You saved me from having to take apart the agitator (which was my next step). You saved a whole load of sopping wet towels and my time. Thank you!
THANK YOU!!! All other videos show taking the washing machine apart and doing a bunch of repairs but I found your video, tried this and now my laundry is up and running again! THANK YOU THANK YOU!! :D
My friend fixed his whirlpool wash machine exactly the same way today. Awesome!
Omg thank you so much. My husband just replaced the cutler on my washer. I went to use it this morning and it wasn't spinning. Found your video and it fixed my washer. 😄
Thank you!!!! You saved the day, not with ONE washer but with TWO totally unrelated washers that happened to land in the same house. Crazy that they both had this same problem before I even used them (they were used). This was very appreciated!
Mi
Ugh
I can't believe this worked. I have a Frigidaire stackable that drained but didn't spin I took apart the drain pump expecting to find something clogging it but found nothing. I was beginning to despair when I found your video. THANK YOU THANK YOU!
So great! My issue was definitely was an uneven load, but the motor already had locked. Ive been having issues with my Mabe for more than a year,,, and 9 out of 10 times it is the sensors locking the motor. Thank you for taking the time to make this video!!!!!
You are literally saving others with this video! Thank you so much! It worked on my elderly whirlpool. I am so grateful to have found your video. Thank you for sharing and caring lol If I ever become wealthy, I am going back to my saved videos and sending you a huge check. So serious ! lol Thank you so much!
This was too good to be true but I tried it and...IT WORKS!!!!!
I am so relieved!
Thank you so very much!!
Worked like a charm on a 15 year old Kenmore top loader. No lights or anything fancy, just knobs. I just followed the steps not knowing if anything was reset since I have no lights on the machine. But I started the washer and it started to fill like normal! My issue was that only the Handwash setting was working properly. Any other setting would immediately start spinning as the washer was filling. So when it came time for the last spin, it was already set to “off” by then and the clothes were left sopping wet and not fully clean. This was exactly what I needed. I alone take care of my brain damaged and paralyzed mother with ZERO state assistance (thanks to Texas being a red state that hates poor people). So for us to have a broken washing machine would’ve taken 100% donations to get it fixed or replaced. We live paycheck to paycheck and I’m out of work and can barely afford her meds, diapers, etc. We ALL need to share this video and make this guy rich for all the money he’s saved us!!! THANK YOU FOR HELPING YOUR PEOPLE!!!
Boyyy! You just saved me a $1000. When your birthday? Imma get u something!!!
Lol glad to hear it helped. Enjoy the laundry! 😇😄
Maaan
Lmao🤣😂😂🤭
😂😂😂😂
Lol lmao😂😂😂
I have a total different brand washer and I did not think this would work, but it did, like magic! thank you for posting this, saved me time, money and headache.
I was just about to take the whole agitator apart and scrolled down to this video, you just saved me a lot of frustration, this worked! Thank you!
Oh my goodness a week ago my washer quit draining, read only about unplugging for 5 minutes did that work. A week later same thing unplugging didn't help this time, somehow came across this video did the lid clicking working thank you heavenly Father for helping me find this video.
God bless you sir! You really saved my bacon. Yes this worked! My washer worked fine the last time I used it. When I went to wash clothes this week -- nothing. No lights. No response from the controls. I turned it off at the breaker, let it sit for a while, then turned it back on. The yellow "sensing" light was on and blinking, otherwise still nothing. Later, I found this video and am now up and running. If you use YT the way I do, you'll want to know this about my washer: 2019 Maytag "Commercial Technology" high efficiency top loader, Model MVWC565FW1 (5 knobs across the panel, looks like the Centennial Series, probably an analog of some Whirlpool model as well)
lol. Just did this procedure on my old reliable Amanda washer. n got my machine going. Much thanks! Crazy easy fix. .
WoW!!! Brilliant video. I did all sorts of troubleshooting and nothing worked. Fortunately, I came across this video. I did exactly what you demonstrated and now my Whirlpool is working. I could not believe it was so easy to reset such error code.
Sir, please keep on making good videos. Stay safe. Respect and blessings.
This just worked for me.
You just saved my landlord a headache she didn't need. I desperately did not want to tell her the washer wasnt functioning properly. I figured it was a pump.
Amazing video ❤
Glad to hear it helped! Happy laundry!
Thank you so much. This actually worked. The agitator function wouldn't work. Checked the agitator parts and they were all fine. Thought it was the belt but luckily i found this video first, tried it, loaded up the machine and it worked. Thank you, saved us from spending money.
My washer was overfilling about 4 inches above the clothes which lead to UL code constantly. This totally helped. Another suggestion someone said was to run an Affresh cleaning cycle (Bravos 300) which would start and change from an hour to 4 minutes shortly after beginning. Both are working perfectly now. Thank you very much.
Thank so much!
My Whirlpool washer stopped spinning after my wife had washed some extra heavy blankets.
This fixed it!
I was already looking to buy another washer!
Dude. You rule. Needless to say I fixed my Kenmore series 100 washer. While I was thinking it might be the capacitor or something in the motor or the pump or all these other things they mentioned in other videos your 10 second solution did it! Thanks!
Thank you! Thank you. After an appliance repair person said it was too difficult for him to even come look at.... I did it and it worked ... He probably would have charged me $400-$500 to "fix it"
Thank you so much!!!!!!!!!!
You're very welcome!! Glad I could help! Happy laundry ;)
@@WordofAdviceTV me
Thank you and blessings on you and yours. My husband is disabled and I have to fix everything and without you I would have most likely been on my way to the washeteria and the repairman on his way to my house.
Thank you SO much!!! I've been trying to figure this out for over an hour. Finally I googled it and your video came up, this trick worked like a charm. THANK YOU AGAIN FOR SAVING MY SANITY!!!
My Amana was on the curb. I decided to watch one more video. Ran cord and hose to curb. Performed magic, washer worked!!
Omg this is the first time this happened to me and I was stressing thinking we would need to buy a new washer! I have the conservator washer for about a year already & haven’t had any problems with it I know it’s a very low end washer but I’m happy this worked for me thank you!
My washing machine didn't work for over a YEAR, my gut told me it was something simple so I kept it there and tried EVERYthing, then found this video and it was this...wow. I never even knew a washer could be reset, like WHY don't they tell you this in the manual? or when you call the service number? It makes me wonder how many perfectly good washing machines have been thrown out and replaced because of something as simple as this 🤔😮
Dude, you are a genius! Saved me hundreds of dollars or a hot, sweaty day of work. Other videos wanted me to start taking the machine apart. THANKS!
I have an Admiral top loader washer, it stopped working this morning, would not adjuster or spin, it filled with water and that it, ran across your video and gave it a shot, it worked, now my washing machine is washing. Thanks
Worked on my Whirlpool!I bow to your superior knowledge sir!
My automatic Washing machine malfunctioned with error e7 -1 and tried your solution, it worked!!! Thank you!
Thank youuu!!!!! Worked like a charm!!!! How do people like you exist???!!!!
Thank you so much! I was prepared to take the machine apart when I discovered your fix! It worked!
Amazed to say this actually worked on our very old washing machine. Thank you
It worked! I thought you were joking, but it fixed my Kenmore 110 washing machine which would no longer spin. Thank you so much for making this video!
Man I LOVE U AND DONT KNOW U!! I fixed my washer today because of u!! THANK U THANK U!!💜💜💜
Holy cow! I never dreamed this would work on my 39 year old Maytag and yet it did! Thank you!!!
I took my machine apart, everything was good, and had parts ready to replace things if needed. You solved my whole problem!! Quick and easy! Now I have to figure out how to get the cabinet back on like it is supposed to go, lol. TY!
It actually worked!! I was just prepared to go to Lowes and spend that insane money for a smart washer. Maybe next year I will throw them my money.
1st problem ever with my 10yr. old Maytag Centennial and you, my friend, solved it in a matter of minutes. I thank you !!! Have subbed.
Perfect! That's what I like to hear :) Thank you for watching, commenting, and subscribing!