[OUTDATED] How to get rid of the 20mph speed limiter on your Radrunner 1 (DOES NOT WORK ANYMORE)
HTML-код
- Опубликовано: 3 окт 2024
- How to get rid of the 20mph speed limiter on your Radrunner 1 without cutting any wires if you do not have the display.
Flip the bike upside down
Trace the wire from the motor in the back wheel to the controller
Unplug the connection cable between the 2
Find the pin referenced in the video in the connector
Cover it with electric tape
Plug connector back in
Add your zip ties
Ready to go.
Hi JP, thank you for sharing. I just wanted to share my experience. I just received my Radrunner EU version (250w motor) and performed the trick. Before I had a max speed of 25km an hour and after I got 30km an hour.
o really?
do u use the same trick
@@waterfull2907 : Yes, I do.
@@gijshahn4497
thanks bro, will try it on mijn too.
its Eu version
Hi 🙋♀️ wow did it change the throttle on your eu version?
@@kkkkit Hi, it changed the throttle into a throttle that you would find on any other bike.
Wow I thought it was too good to be true but it really worked. Noticed a faster top speed and a huge boost downhill. Thank you!
Wie hast du das gemacht man trennt die Kabel und fügt sie wieder zusammen ?
do you have an update on how its going? and down sides?
Mod still on and bike is working fine 🙏
Thanks for the update, I just did it to my rad bike but it didn’t work. 😒 guess I’m unlucky!
@@Matt-px7zdme too it’s not working I’m bouta js cover random ones at a time to see what they do
Thanks for the video. I can't speak for everyone and every model, but it appears that the folks at Rad Power have been busy to disallow these hacks. For newer models, changing the speed in the menu to 40 kph no longer works. You can change the display, but the motor still cuts out at 20 mph when riding. Again, not saying this applies to every bike, but covering the pin on the newer models only seems to cut out the speedometer display, and gives you no increase in speed either. Thank the bloody lawyers for this.
Disappointing indeed.
Correct me if I’m wrong, I have dealt with a variety of ev brushless motors and large rc car/ drone motors, I was under the impression that the outside pins (not the 3 large gauge pins) where only used for the HALL effect sensor/ positioning of motor sensor. Are these powered wheels (sensored motors)? if not why are there so many data pins needed inside this connector? Is it just temperature and rpm?
this seems to be happening for all ebikes. they advertise 28mph but only go 22
@@last7509 it's because lawmakers are cracking down on ebikes since they don't require licenses in alot of cities lol. SO these companies are trying not to get their bikes banned. Sucks because not all cities are the same. In alot of cities, they don't care as long as you aren't riding with traffic.
Only winning move is to completely change the controller
this is great to know ive been wanting one of these. if i get one this will come in handy. thanks for the tip
Its worth every penny!
Thanks for the tip!
I've tried this on the new Radmission, but it doesn't seem to work 😭😭😭
One would expect the connection is the same?
Yeah, it didn’t work on my RadMission, anyone know why?
Didn’t work on my radrunner 2 either. Throttle still shuts off at 20mph
I did it! it worked like a charm. Thank you sir!
Glad you were able to figure it out! Its not a huge boost but definitely noticeable
@@jpturibiomiguel8577 any tips to remove the speed limit on the throttle? Capped at 6km/h at mine radrunner. Thx
@@stephenkissous8031 What? 6km/ h? That can't be right? It's stock at 32km/h. Rad Runners stock throttle only or PAS4 will get you a speed of 32km/h What is this 6km/h your saying? If its what I'm thinking, you need to go in the hidden menu of your controller, and in there is an option to set speed lower or higher.
@@migthefig he has a eu model.
He needs to get the display upgrade and set the max speed.
@@Funermen But your telling me that in Europe, the max default speed is 6km/h?
I just did this on my 2021 Radcity. The speedometer does not register anything with that pin covered (stays at 0), which is perhaps how the governor is disabled. I’ll gladly take the additional speed over the data point of how fast I’m going. The rest of the display works as usual.
were is the updated version of the video
How fast is it after the speed change? If the original goes 20 mph, how much does this go?
Max speed of rad ebikes are post to be 30
doesnt work on 2021 rad runner 1
No
My power sensor went out trying to put a too strong of a magnet by it. Will this or anything else work short of just getting a new one
Does it work on the ran runner 2 too ??
It worked on my radrunner! Great advice! 🙌🏽🙌🏽
Couldn’t get it to work on my Radrunner any tips
@@LTE710 It has to be only on that pin. If the tape is accidentally covering another one up, cut the strip skinnier.
@@LTE710 what radrunner model do you own? Will this electrical tape trick to disable the speed limitor work on my radrunner 2?
@@jmichaels79I have the rad runner 2
Hi, will it also work for other radpower models? Rad Mission ?
If you find this out about the rad mission1 let me know please. It's a difficult answer to track down online.
@@williamhudson5384 I was told by everyone to get an Eggrider V2 to unlock the speed limit and increase the torque on the Mission. I ordered it but I wont get it till the middle of February.
It didn’t work for me. So pissed. I have a radrunner and did not work.
Do you have any updated videos on how you can increase speed if the controller is in the battery ?
Why would you get 3 dislikes? That’s stupid Just don’t do it to your bike idiots! I did it to mine and it definitely has more zip, Thanks bro,
Ha! It works! Thank you sir!! Question: how did you figure this out??
Someone else figured out that cutting the white wire would disable the speed limiter, another guy cut open hisnwire harness and traced the white wire to this pin but used a terrible hand drawn pic of what pin oncover so i made a video just showing how to cover it
@@jpturibiomiguel8577 Great video and hacking skills, all y'all! It would be easier to identify the correct pin by referencing its position in relation to the arrow on the outside of the connector.
@@nigelparry
yeah, it would be beter with a pic
THXS WORKED GREAT right on.
can anyone confirm if this works on the EU version too?
Which pin i have to cover ? Cannot understand , please reply
Thanks for sharing this trick! I had trouble picking out the right pin from your instructions - I'm a very visual learner.
You want to tape the octagon segment that's one step anti-clockwise from the alignment arrow on the cable sheath, is that right?
Thanks for clearing that up! I wish he would repost in full sun and a friend holding the camera.
For others that have trouble, hold the connector with the single pin on the outer radius at 12 o'clock position (other single pins on the outer radius are in pairs, there is only one side of the connector that has a single pin on the outer radius) count two pins clockwise from that pin, and cover that pin (around the 4-5 o'clock position)
It works I want from 20 miles an hour to 30//I held my phone up to see how fast I was going// only your speedometer on the display stops working and you can't tell how many miles you've gone
Same here on my Velowave Ranger
Hi
Does it work on radmission 1?
Many thanks
Yes I would also like to know
This seems to not work on the radmission 1, still cuts out at 19-20mph however it oddly seems to accelerate harder rather than the soft launch it usually does, weird.
@@shawnmckenzie575 what radmission you got? EU or US?
Wait, so how much speed increase do you get?
Thanks for sharing !
Has anyone done this to an EU version of the Radrunner with the 250 watt Bafang motor? and if so is it worth the effort? is any additional speed or uphill power realized? Thanks all!
The motor is not a 250w, its really capable of 500w and peaks of 750w, but the eu radrunner controller is limited to 250w, get a replacement controller of aliexpress for about 60 euros and you can unleash the real power of the motor
@@ricardorodrigues3508 Thanks for your resxponse. I wouldn't know which controller to order do you have a suggestion as to which or are they more or less the same?
@@vittoriodimeglio8564 this one should do, just make sure the plug feom the controller is compatible with the radrunner motor
pt.aliexpress.com/i/33053667742.html
@@vittoriodimeglio8564 or look for the same model as bolton bikes sells, this one is 100% compatible with the rad runner boltonebikes.com/products/2019-radpower-upgrade-kit-with-tail-light
RR+ specs: 48 V, 14 Ah (672 Wh) with Lithium NMC Samsung 35, Controller
48V, 250W. Which controller would be suitable? Thanks for your response, much appreciated.
Does it work on the rad runner 2?
Tried it on a Radrunner. No luck. I even tried taping EVERY edge one by one in case your video was mirror imaged (my wires are on the right side) any advice?
Same story here
Same. Purchased mine about a month ago. Could this be something they've "fixed" on new models?
idem for me radrunner europe doesn t work
@@craigh4122 I think so my new model also doesn't seem any faster. left the tape on the only one that did not shut down something else lol
Are you guys from US , EU or Canada with your Runner? I wonder if people that had success is from the same country ?
Did someone find out by now if it works with the RadMission 1 EU?
Answer: it does not...
Great video!! I wonder if this would work on a Aventon??
For the Aventon,,, I believe you can download the app on your phone, and toggle it from there
anyone know if this works with rad runner 2? :)
You ever find out? I have one too🫡
Didn't work for me on my RadMission (eu version). Tried both the second pin from the right (no result in max speed) and the second from the left (motor didn't work). Still curious about increasing the speed to approx. 30 km/h though. 23.7 km/h (on my Garmin Edge with calibrated speed sensor) is a tad disappointing.
You all prolly dont care but does someone know of a method to log back into an Instagram account..?
I was stupid forgot the account password. I would appreciate any assistance you can offer me!
@Kingston Malakai instablaster ;)
@Enzo Alijah thanks so much for your reply. I found the site through google and im waiting for the hacking stuff atm.
Looks like it's gonna take a while so I will get back to you later with my results.
@Enzo Alijah It did the trick and I actually got access to my account again. I'm so happy!
Thank you so much you saved my account!
@Kingston Malakai You are welcome xD
Thanks a lot! It works nicely.....But still next challenge, the bloody throttle speed limit ...any clues?
I think its the max it can put out with the stock controller.
wonder if this will work on the ado air! so annoying getting to just under 16mph and the motor cuts with the peddle assist , the throttle opens it up to over 22mph but want more out of the peddle assist
Hey, why don't you simply draw a diagram of the correct pin?
Yeah that would be easier
don't know if they changed the parameters of the bike, but did not work for me. I guess I could try the other pins, but inserting a small piece of take exactly in the right place is no easy task
Regarding the placement of the small piece of tape: I thought the exact same thing when I watched the video. Haven't bought a Rad bike yet but will likely try this when I do.
Anyone know the wire colour please?
Thanks
Does the speedometer still work? Great video.
No the glitch got pachet sorry
I put on a cst big boat tire 20x3 front only.....21.5 now 22.6 mph downhill...20.5 mph level.....used to be 19.8 level.......stock rr1...single speed.......stock inner tube...
Please i have a raleigh array suntour ebike, can you tell me how to unlock the speed of it. Thanks
thanks good news , to increase top speed with no optionnel display but someone have a picture the tape on connector please ?
does it have to be electrical tape you use
does this work with European models? all electric bikes are castrated even more over here.
Hey bro I have gesheng ebike same cable on the back like yours now my bike gos 23 miles a hour rite now if I do this hack how much faster will I get n all so do I lose my speedo ??????
does this also work on the radrunner 1?
I have a emojo street rod 48v and cant go over 20mph any suggestions
I’m going to try this on a Swagtron DB-7. Wonder if it will help?
Wish I knew a trick to break the speed limit on the varun bike
Hi I have a basis beacon electric bike..Will it work on this model?
Can you do this on a SONDORS?
Hi nice video
Will this work on engwe Ep2
I have a 2018 Radrover (Fattire). Do you think this could work in my bike??
I have already done this excellent mod with the pin but can you adjust the speed through the Radpower upgrade display on the EU version of the bike..?
That i am not sure off i dont even have the us version display. Thats why I used this litle trick id suggest call in rad to find out they can for sure give u a direct answer
Haven't tried this trick....but I changed speed limit to 25mph with the radrunner LCD digital upgrade in the settings
From reading around it's only in the US that the 20 mph limit is there. It's a US compliance thing.
with my eu version 250 watt 2021 do not work. the pin shown is right because the other pins if covered give no power to the bike but probably in some version of the bike that pin isn't cabled and the limitation of the speed is made directly by the motor. No body else can give me some help about tricks to encrease the speed of my rad power bike? thanks
I have a different bike but it’s super similar but I have more pins
Does this work on the radmission
I have the radwagon that I bought around the end of 2019, any idea if this will work on it? Also does this remove the speed limit completely or just make it 25 instead of 20? Thanks!
Get your own profile picture
@@jesper164a What are the chances of two people interested in rad bikes having the same goofy smiley face avatar lol
Does this work on radrunner 2?
I dropped a 50 cc motor in my bike and it worked! Going much faster now, thank god for gasoline engines!
Yeah gas bikes rule. 66cc hauls if you tune it just right. I tell people its a hybrid. The motor charges the battery for electric motor.
Do u need to put another zip tied there??
When plugging in the wire yes, on your bike theres a,little groove for a zip tie to go though on the frame. It secures the wire on your bike tight. Always re attach that.
Does this work with a Ecotric 20" fat tire 500w 36v motor
this is what i did but i ended up just not connecting the 6th white wire in the hall sensor wireset from controller. it kicked out an error 21 code and it freaked me out so i plugged it back in until i figure out if the error will harm my bike or if its just a formality to unplugging the wire. i could care less if i have a speedo if it is faster. i also lightly shunt modded it for a bit of extra torque. started it out lightly and i will add a bit more later. im still unsure of controllers so id like to keep this one as long as possible.
When i discovered this hack, it did not affect the speedo. I believe they may have changed things so this doesnt work anymore unfortunately
what wire could you cut
Will and other tape work?
Got me a gen 5 , 500 watt hacked the controller came doing 32km now does 40km,but still want more it gets to 40 I can feel it holding back , will this trick work on radrover gen 5.
getting the upgraded control box and display window speed ect later, but for now I want to see if that trick stops it from holding back. Pls tell what you think
Well, I did this on my bike and it worked perfectly. I tried it 4 times on my friends radrunner and it didn’t work for some reason.
Me too (on my radrunner). No luck. Tried covering every edge one by one.
Will this work with the radrover 6 plus?
Does it work for ncm moscow plus??
Will this work on other ebikes with the same connectors?
I think so. So long as the connector interface is the same.
I am sick of being pointed here. This video is old and doesn't work on any of the newer models
@@shawn10001 no idea why people are still being pointed here. It was helpful once upon a time
This doesn't seem to work for my 2021 RadRunner Plus. Changing the top speed from 32km/h to 40km/hr through the LCD display screen hidden menus did seem to increase it a few mph though. I'm going to try adjusting the wheel size now too to see if that changes it as well.
wheel size adjustment is an illusion. ultimately its governed by the stock controller.
Anyone know if this works on an older basic Ancheer ebike? It's the small white one.
what could you cut
Tried it tonight on my RadMini 4, but all it did was make the speedometer stop working. Oh well!
PS: I found out that later Rad models have an internal RPM limiter, so I swapped the motor out for a couple hundred dollars US. The new motor doesn't have any more power, but it doesn't have the limiter either.
Did you replace your controller too?
You mean the controller? All the motors are the same.
controller is the unit that talks to the battery and motor
Didn’t work on my 2020 RadRunner 1
Damn, that’s discouraging. I wonder why it didn’t work. It seems if the bike has no idea how fast it’s going, it will have no way of knowing when to cut the motor off. Considering getting this bike, but only if I can get rid of the restriction.
@@scottbrown5426 I hear that both RadPower’s display upgrade and the one available from Bolton can remove the restriction. This seemed like a free hack, wish it would have worked.
I recently bought the Rad Power display upgrade and it seems I have ‘removed the restriction’ by reducing the wheel size setting.
Will this work on a SWFT Zip bike?
This is great.
Do you know how to get rid of throttle speed limit? It’s limited to 6km/h
Thx
i've read about getting the LCD display upgrade and you can reset the throttle limit mode via this but unconfirmed
@@stm180681 You can. I've done it with my LCD screen. You hold the up and down button down at the same time and it opens up the internal options menu. Then you press mode to switch through the different options. The second option is the internal top speed limit set at 32kmh, using the up and down buttons you can change it to the top speed of 40kmh. Then you just hold the mode button down for a couple of seconds to exit the options screen and return to the display mode.
Honestly tho, I haven't noticed too much a difference.
@@andrewmildenberg4210 did your speedometer still work and did it show almost 25 mph? Thank you. Also, I have a 2021 model which I am totally satisfied but prior to this I accidentally changed my tire size in this application, can you tell me the correct tire setting size? I know I should be able to figure these out but since I have turned 73 years old, I’m not as sharp as I once was. I can ride my bike with the setting on PAS 1 most of the time.
@@martinmaddox5315 no problem. The speedometer should still work, and if you have the Radrunner the tire size is 20”. Although my top speed isn’t 25/mph unfortunately, it tops out at around 23.
Hope that helps, and happy riding! 😃
Worked great ty
Would this work on a dawes arc 2 ?
Thank you so much!
Well I covered it cant tell if it did anything hope it did something
I'll be able to give you some ideas of what I have done I hooked up two batteries and I'm getting a true $750 watt motor from China
Did it fit?
I covered 2nd pin but it doesn't work
I'm a little confused because I have a Rad Runner, and it did 25mph right out of the box.
I believ they have changed things since i posted this videos, alot pf people dont seem to notice the difference anymore i bought the radrunner when it was fairly new
help:)🤓
Is it colck wise?
The one, from the second space to the er right.
On your camera its viewd the exact opposit i guess
Clockwise
Rad expand?
Thanks for the video tip ! I'm still waiting for my radrunner. If you cover that pin will it show any error light or codes in your console? Thanks
I dont have a display so im not sure.. Im sorry do let us know tho if u try it!
@@den331Z i bought lcd upgrade for my radrunner1 ....doesnt work cant unlock the speedlimit....its not in settings
@@Kaiya_Corey You have to go into some "hidden" settings with your new display, by holding the up and down arrows down at the same time for a time. Then you can increase the speed limit from 32kph to 40kph. RUclips video showing the technique: ruclips.net/video/b6wuDOT1iek/видео.html
@@tedroth5384 The Runner Will not go to 40 for me. The display will show 40 but it is not the real speed. I've tested this with my friend on his bike, in his car and with a speed thing on the side of the road where it tells cars or bikes the speed your going. It would never go 40 but my display was saying 40. So the Runner has 20 inch tires. The only way I was able to get a real speed upgrade is to change the size of the tire from 20 to 22 in the display option (if I got bigger doesn't work. 22 is only one that makes it go faster), and then I can get from 32km/h to 35km/h. But even changing Like I said to 40 in the menu, I speed up, bike shows 40, but its not real. Does this happens with you?
Will this work on my nakto ebike
how about radmission? /
does this work on 2021 radrunner?
Has anyone tried it on the "Original 920e" bike from Decathlon?
How fast will the motor go now since the 20mph limit is off? Also, I ordered the display upgrade and will be increasing the speed to 25mph so if I do that and do this you think it will go even faster?
About 23 -28mph
@@jpturibiomiguel8577 LOL!🤣🤣
did your disply upgrade work?...mine doesnt
@@Kaiya_Corey that thing is stupid! You may get an increase of one mile maybe two miles per hour. Go to electric bike world you can buy a 25 amp controller. Plug and Play. Not the 35 amp controller from Bolton bikes. Not that one. Ebike World 25 amp controller does wonders for the bike👍
@@Kaiya_Corey I put 2017 rad Rover display on RAD Runner 1. Yes it works. But it did not increase the speed at all. That function does not work. Best option is just to get a 25 amp or 35 amp controller. Because all the controllers on all radpowerbikes are useless and garbage.
Does it have to be electrical tape
Nah, just use painters tape and write "Electrical Tape" on it using a permanent marker. Problem solved!
I have a Red Rover 5 2020 and I wanted to find out from you once I take that off would I have the pedal assist I'm 59 years old and I have bad knees and I need the pedal assist if you can help I appreciate it and I'll send you pictures of my bike if you want to be friends what I've done to it so far it's different from any other bike you have seen
I tried on my radrunner, don’t notice it?
Can you use any tape to cover the pin
no, you should definitely use electrical
i need helpp mine looks different
It didn't work on mine I got mine in the mail about 6 months ago!!!21 mph down a hill...
Does it work on heybike mars
Hello