I have a sailnovo e bike goes 18 mph is there a way I can make it go faster I know someone told me before about something with the internal settings please lmk
ueally its white but not always white. but if its a wire that loops back in the controller that's the wire if its one that has a wire speed limiter. and some that still use that jumper wire they hide it in side the controller's metal case.
Thank you for your channel! I’m going on 2,500 miles on my Aventon Aventure Love it! I would love to unlock the speed limiter on my throttle. Any thoughts on how to with the Aventure?
Great video Jimmy!! Can you please make a video on how to unlock the top speed with throttle only on the kd58c display? I have the 2023 version, and I can’t seem to increase the speed. Thank you!
THx i bought a 500watt 48volt ebike with a throttle and a new battery. and it peaks to 750 watt. but am considering putting a 1000 watt kit on there in the future. @@dc7123
Hello @jimmyboyGR I have a Tomofree x20 with a 1000 watt rear hub motor, control settings screen number (S866) I’m currently doing 19 mph , any tips on helping go faster maybe 30-35 mph. Any tips would be appreciated, thanks
hi,19 mph is low for your system,see if you can change the volt flow parameters from your display,48v-1000w should give you a god 29 to 32 mph depending on your weight.
HI, do the motors peak 1000watt,or they are 1000watt factory? if they are 1000watt factory each one should peak around 1800 watt ,and you should go around 46 mph
Weirdly I have the setting to make tire size smaller and my ebike slowed down on the speedometer, I have 20 inch weels I put it too 30inch and speedometer reads 70km .but doesn't sound any different
I have a highboy p6 ebike, and I don’t know where the controller is or if it will even work on it, do you know where the controller is to remove the right cord?
@@jimmyboyGR Lectric XP2.0 500W rear hub motor. The controller appears to be internal, don't know how to determine if sinewave. Manual doesn't give that specification. Thanks for responding. 😄
I couldnt find a magnet or speed sensor on my movelo walmart ebike. Just a motor cable going to the controller. Which is somewhere in the frame. Im not really sure where it is tbh, there is nothing online to figure this out either.
My ebike is pedal assist and throttle controlled, 90% of the time I use throttle only, is there a way to unrestict the throttle . My ebike is 1000watt hub motor but only goes 20mph I no it can go faster but can't figure out how to get it going
@@jimmyboyGR I can’t seem to find the controller anywhere and also I was sent a video on how to unlock its top speed but it never worked so I ordered a new controller to swap hopefully
Just wonder if my Engwe engine Pro 48V 16aH 750W motor ebike can go more than 31mph the maximum on the display, if the controller and one 750W motor can handle it.
U want more than 31 mph that's stupid to me u might as well get it registered 30 mph on an e bike or scooter I lightning fast u make no sense u might want control
@@jimmyboyGR hi I have a Bafang 1000w 52v but my controller shows 48v I’m getting 28mph downhill max how do I get the speed upto 35+ so I get the girls wet for me. Thanks
@@jimmyboyGR oh wow thank you for replying. The motor is in the back wheel. The controller is inside the frame above where the battery locks in. It has two main wires coming out of it and then a small black one that has black, red and blue cables with a three prong connector but I'm assuming it controls my pedal assist because it runs to my pedal. If you type in kgk k75 e-bike in the RUclips browser there's actually an ad that pops up for it. I would be extremely excited and appreciative if you could help me figure this out! My edit was about the wires I said white instead of red. woopsie
I ride my swagtron Eb5 on the sidewalk, how can I set my speed to lower level? I have seen some ebikes that have connectors on the handlebar. Can I install a different throttle with 3 speed limiter without hooking directly to controller which is inside, instead cut the wires of currently installed throttle directly on the handlebar and turning it into a connector for a new throttle, would that work?
Hey I am trying to unlock speed on my yadea ks5 pro kick scooter. I cant go more than 25 km in Sport mode. Any help to de restrict speed limiter in order to go 35 km?
Thanks for the help! Great video!
Thank you for helping me remove the speed limiter from my e-bike!
Everyone listen, this person is amazing listen to his videos, thank you again!!!
jimmyboyGR IS TOP NEWS! 👉👍👈
Thank you for sharing especially us guys who are new to e-bikes
thank you!
I have a sailnovo e bike goes 18 mph is there a way I can make it go faster I know someone told me before about something with the internal settings please lmk
any insight for a DYU v8 / or FF500 bike ?
soon i let you know ,give me some time,thanks! DYU are great!
Very smooth and informative video, Great job! 👍
THANKS YOU SOLVED MY ISSUE! YOU DESERVE THOUSANDS OF MORE SUBS FOR SURE BRO!!!
Great video. Great info. Thank you!
Thank you so much. Btw a helpful hint is it’s usually a white wire that loops back to the controller.
thank you!
White wire from the controller??
ueally its white but not always white. but if its a wire that loops back in the controller that's the wire if its one that has a wire speed limiter. and some that still use that jumper wire they hide it in side the controller's metal case.
What do you do with the wire cut it or connect a throttle to it
YOU ARE GREAT BRO, THANKS! 👍👍👍
Thank you for your channel! I’m going on 2,500 miles on my Aventon Aventure Love it! I would love to unlock the speed limiter on my throttle. Any thoughts on how to with the Aventure?
hi, most likely its in your display settings
Thanks 👍
Great video Jimmy!! Can you please make a video on how to unlock the top speed with throttle only on the kd58c display? I have the 2023 version, and I can’t seem to increase the speed. Thank you!
I have a sondors fat tire😭 any clue on how to do it on these bikes?
Hi, I have Mukkpet Suburban. do you know where is the speed sensor and magnet located? I am not able to find it.. thanks!!
Great info, will like and sub, thank you
THANK YOU!
Jimmy - do you know how to do this on a Jackrabbit?
Thankyou man, I appreciate your help so much
thank you!
Should I upgrade my 36-volt to 48-volt battery for this and my 250-watt hub motor to like 350?
1000w
THx i bought a 500watt 48volt ebike with a throttle and a new battery. and it peaks to 750 watt. but am considering putting a 1000 watt kit on there in the future. @@dc7123
Will the wire trick work on a a Zugo ebike?
give it a try
Yes
Thank you
I have the new 2023 mamba venom! Any tips on getting the best out of it? Its a 750w with 48v and 17ah
you mean speed?
@@jimmyboyGR yeah mate
JIMMY THANKS AGAiN👌👌👌👌👌👌
Hello @jimmyboyGR
I have a Tomofree x20 with a 1000 watt rear hub motor, control settings screen number (S866)
I’m currently doing 19 mph , any tips on helping go faster maybe 30-35 mph. Any tips would be appreciated, thanks
hi,19 mph is low for your system,see if you can change the volt flow parameters from your display,48v-1000w should give you a god 29 to 32 mph depending on your weight.
@@jimmyboyGR sounds good I’ll give it a try and let you know, thanks again
@@pedrobarboza8491 THANK YOU FOR SHARING!
Do you know how to take the speed limiter off a magnum cosmo +?
Won’t that affect the speedo
would this work on a totgaurd ebike or a woken ebike
try it !
I have a wooken 20' fat tyres. Did it work, mate?
@@jimussa hi , try it mate!
How would you remove the speed limiter from a swagtron eb6 or is it even possible??
possible!!!
Any clue where I could find out how or if I can
@@thomasvick5884 all is possible!!
WELL DONE JIMMY, THANKS!
I was wondering how taking off the limiter, will affect my battery life and other components?
How does the speed sensor work on a Hyper 29" MTB. Is the controller in the battery box?
can you make changes from the display?
@@jimmyboyGR no
@@jimmyboyGRhow do I change with the old style led I got a old bike please help
Ok but what will it do, when u unplug the wire & put the electrictape on it how would i know when i got the right wire?
Please did you find out. How to make my Raleigh array ebike go faster
👌👌👌i done it on another ebike i got👍👍👍👍
How fast you go
Is this possible on a Jupiter bike defiant? I just got it the other day, was hoping to do this with the extra battery I have.
Can I set sensor to frame inline with pedal arm
Good day my friend. I brought a 2×1000w bike. It doesn't go over 35 mph. I think it has a speed limiter. Can you please help me.
HI, do the motors peak 1000watt,or they are 1000watt factory? if they are 1000watt factory each one should peak around 1800 watt ,and you should go around 46 mph
BEST INFO EVER!!!
Weirdly I have the setting to make tire size smaller and my ebike slowed down on the speedometer, I have 20 inch weels I put it too 30inch and speedometer reads 70km .but doesn't sound any different
Cause your controller thinks you're turning 30s at same rpm which makes it think you're going faster as you would be with 30s
👍👍👍THANKS!!!
Perfect mate👌
so, can i just try this wire by wire, just take one and unplug it turn the bike on and pull the throttle
How do I view video of hiboy ex6 speed limit removal
I have a highboy p6 ebike, and I don’t know where the controller is or if it will even work on it, do you know where the controller is to remove the right cord?
Where are all those cords located on the highboy p6?
Sorry I mean the p7, how would I do it on the p7 if I can’t find the cords or controller
h[,ill look it up and let you know
@@elijahmiddleton8542 h[,ill look it up and let you know
@@elijahmiddleton8542 h[,ill look it up and let you know
Will it hurt my e-bike log term if I take the governor to make it faster I have a HAOQI black leopard 750w motor?
there is no guarantee for anything.
@@jimmyboyGR what I'm saying if my e-bike let's say it's going last 1year bt if I take the governor it will last 5 months?
@@frankdiaz7061 whats- governor?
@@jimmyboyGR speed limiter is the same as governor, just a different name.
Hey buddy, can you give the specific steps for an Lectric XP 2.0?
Hi , sine wave controller? mid drive?
@@jimmyboyGR Lectric XP2.0 500W rear hub motor. The controller appears to be internal, don't know how to determine if sinewave. Manual doesn't give that specification. Thanks for responding. 😄
Does this work on a Hiboy P-6 ? Tks. ⭐
in most cases ,yes
ruclips.net/video/EMgWGcHaGuk/видео.html
Hi i dont have a speed cencor we're is thé secor in a back weel motor ? Pls help
inside the controller
What do i need to do ?
@@kaykluskens9675 look at the video what i say,thanks
Like yer bike setup
I actually found that mine worked in reverse, the higher I turn the wheel width up the faster it went. I went from 24 in to 28 in and gain speed
I’ve a Cos bike ebike n lately the throttle went broke while driving to work so I ordered a new one on ebay and it’s on the way! Wish me luck bro 🤣🤣🤣
all god!!!
@@jimmyboyGR not yet piece as not arrived yet mate 👍🏻 but I’m still alive 🤣
Please i have a raleigh array suntour ebike, can you tell me how to unlock the speed of it. Thanks
hi,is the controller sighnwave or square signal?
Hiya, em to be honest I don't know. It's a new bike so I don't know. Thanks for replying to me. 😊
Hi I'm nearly certain it's a signwave just did a bit of research
let me know if you find out@@nlarr08
@@nlarr08 you have to be 100 percent sure so i can help you
I couldnt find a magnet or speed sensor on my movelo walmart ebike. Just a motor cable going to the controller. Which is somewhere in the frame. Im not really sure where it is tbh, there is nothing online to figure this out either.
you got to get and open your controller
Would this work for any bike with a screen?
no.
My ebike is pedal assist and throttle controlled, 90% of the time I use throttle only, is there a way to unrestict the throttle . My ebike is 1000watt hub motor but only goes 20mph I no it can go faster but can't figure out how to get it going
yes you can,give me a little time i get back to you soon,its easy,
@@jimmyboyGR Thanks man, I've tried removing the pedal assist sensor but does nothing to help me ,cheers 👍
@@kevinp2186 its all about cable switching in the controller ,soon ill explain it
the kit on your bikes looks so cool! where did you got it?
hi ,i bought like that.
Any ideas for a dyu s2 buy any chance
hi,DISPLAY FUNCTIONS
What's that may I ask
hi,its the display for your controller functions on your handlebar@@iforgot.1
Ok thanks mate
What did you mean on that last statement unplug every wire and plug it back in
HI,just like it sounds,1 x 1 so you wont mix them up!
@@jimmyboyGR I can't get that done I would have to go into my control box can't get to it
@@jimmyboyGR maybe it just works on your bike did you ever think about that
@@bruzza2532 ask someone like the shop you got it to help you so you wont damage the system.
Your amazing thanks
Thank you !
can you show in detail?
Υπέροχο 🎉
I found out you can just disconnect the sense of why that goes to the magnets depends on your bike
Thanks x3!!!
THANKS FOR SHARING!!!
YOU ARE GREAT👌👌👌JIMMY👍
Hey Jimmy can u help with Swifty AT650? It has multiple magnets on the inside of the sprocket. PAS only but I max @ 15mph. Help please?
Can you do this on a make city bike?
ALL IS POSSIBLE!
Great
Sir, how can I remove speed limiter for my Alton, CBEI1 produced 2015?
ask the company its an old model,maybe you cant.
Handy to know tip and good advice about a bell, lights and a helmet👍. Not sure about the riding with two fingers on one of the handles bars though 😊.
Is it safe?
hi. how do i do this on my gotrax F1 e-bike?
MID DRIVE ?
Any ideas for c91 emoko
problem?
@@jimmyboyGR I can’t seem to find the controller anywhere and also I was sent a video on how to unlock its top speed but it never worked so I ordered a new controller to swap hopefully
How do you do this on a Coston ce
HI, IS IT A MID DRIVE?
What about the KETELES K800 1000w
Just wonder if my Engwe engine Pro 48V 16aH 750W motor ebike can go more than 31mph the maximum on the display, if the controller and one 750W motor can handle it.
its tricky..🚴♂
Dude 31 mph is more than enough speed you're faster than 18 faster than 20 25 what's the problem? Just be greatful damn
U want more than 31 mph that's stupid to me u might as well get it registered 30 mph on an e bike or scooter I lightning fast u make no sense u might want control
Will this burn out the motor
NO IF YOU DONT DO SOMETHING WRONG.
the best!!!!!!!!!!!!!!!!!!
How do I unlock the speed on an SMLRO Cargo E-bike? I’m only getting 30kmh
it depends how many amps is your controller
@@jimmyboyGR mine is set at 22
@@jimmyboyGR hi I have a Bafang 1000w 52v but my controller shows 48v I’m getting 28mph downhill max how do I get the speed upto 35+ so I get the girls wet for me. Thanks
@@comfortablynumb8832 Hi , is it a mid drive?
@@jimmyboyGR yes a mid drive
Bird bike A frame. Would anyone know if its possible to get more speed. Its limited to 21 mph now.
volts - watts?
@@jimmyboyGR 42v and 500 watt.
@@jimmyboyGR 500 watt is right. Guessing voltage based on charger output. Could be 36.
Can I do the same on a Nishiro Cityhop 2 ?
maybe let me look at it.soon ill tell you.
how do I take the speed limiter off a virbus electric bike I can't seem to understand
is it a mid drive?
I have a gogobest gf700. Anyone T-Mobile the color of the wire for speed limiter?
Cheers Hands.
I have a kgk k73 ebike and I haven't figured out how to access the speed limiter.
HI , MID DRIVE?
@@jimmyboyGR oh wow thank you for replying. The motor is in the back wheel. The controller is inside the frame above where the battery locks in. It has two main wires coming out of it and then a small black one that has black, red and blue cables with a three prong connector but I'm assuming it controls my pedal assist because it runs to my pedal. If you type in kgk k75 e-bike in the RUclips browser there's actually an ad that pops up for it. I would be extremely excited and appreciative if you could help me figure this out! My edit was about the wires I said white instead of red. woopsie
@@koentalks2888 soon i will tell you the way to do it,thanks
@@jimmyboyGR you're amazing!
How yo do It in a Oxford freeway?
How do I do this on a go city bike?
hi, you do it like the video says.
Hey fid you ever unlock your go city speed
how do you do a riding times z8 1500w ebike?!?
if anyone knows the exact wire or way. let me know please...or ways to increase torque and speed. I'm all ears 👂
Can I do this on Miclon Cybertrack 100
all is possible
Any news about yadea ?
sorry no.
I have fly e bike RZ motorcycle can I do that?
tell you soon
How to do it with an urbanglide 140
just like i explain in the video
How to do it on ouxi v6 ?
tell you soon !
Any hacks derestricting Carrera crossfire 1 please?
Freesky Stallion unlock ???
HI , signwave controller?
@jimmyboyGR I have no idea ? just received it yesterday.
hi,you have to know this@@T-Stat79
Does it work for all bikes cause i got a freego f3
MOST LIKELY
Hello, can a Pedego Boomerang platinum be hacked?
hi,is it a mid drive?
@@jimmyboyGR yes
Thank you!
@@robertahance631 hi , try to change the volt flow parameters to the motor from your display
I ride my swagtron Eb5 on the sidewalk, how can I set my speed to lower level? I have seen some ebikes that have connectors on the handlebar. Can I install a different throttle with 3 speed limiter without hooking directly to controller which is inside, instead cut the wires of currently installed throttle directly on the handlebar and turning it into a connector for a new throttle, would that work?
Hey I am trying to unlock speed on my yadea ks5 pro kick scooter.
I cant go more than 25 km in Sport mode.
Any help to de restrict speed limiter in order to go 35 km?
i ll look it up..
@@jimmyboyGR Thank you
@@jimmyboyGR did you find something ?
@Kanigo29 i did it but nothing . any other idea?
3:00
Didnt work for me any tips?
one wire at a time!
how to remove the speed limiter on a e bike with a throttle
IS IT A MID DRIVE?