@@BoBuilds it’s getting so bad, that tomorrow I’m going to look at a 97 Camry for $1k bucks to get me to work I have to park O’ Big Black for awhile until Biden gets his sh*t together
I had a rebuilt 5.3 put in my 2003 Silverado with what I was told had a stage 2 cam.It sounds ok but I expected a better chopping sound.Now the truck runs but a battery not charging light keeps coming on.The guy doing it is still trying to figure that out.Where are you located?
I have a 2005 silverado 5.3l it has 162,000 miles my oil pressure at idle is alil under 40 I'm thinking about doing the new truck norris nsr cam wondering if I'd be safe
It would cost a little more for me because I have a truck with dod and would have to do a dod delete along with the cam swap. I’m going with the BTR Truck Norris cam in my truck when I do a cam swap.
I have a question My tukkk 04 sierra 4.8 :) Has alot of miles. It ticks some times when for example driving in my apartment and slow down for a speed pump and idle thru. I don't know if it's a lifter. I replaced rod bearings, oil pump a few years ago. Because it ticked. And it stopped ticking. Bearings didn't look bad when I replaced them. Any idea
U are literally right on the money I got like 3200 in my lm7 but unfortunately I didn’t shim the converter and my bearings are gone how much would it cost to take a bare block to someone and get new cam bearings and new crank bearings and the bearings on the rods basically all new bearings and I’ve already torn it down and the crank looks pretty screwed as well
Oh yeah, I’ve owned a 5.0 mustang with that infamous coyote tick and have worked on plenty of low mile eco boost with cam phaser knocks and waste gate rattles lol
I had 4 shops quote just the labor for cam, lifters, spring swap, 4,000-5,500 labor only
What’s the maximum cam upgrade with oem valve springs??
Bro thanks for that info
I have a sierra 4.8 I want to do this please help me
Beginning of video oh yeah im getting a cam end of video fuck this 😂
Shit bro!!. You forgot the most important part.. $4.79-$4.99 per gallon in GAS
$90-$100 a week
Fuuuuuuck I’m about to Tesla swap this bihh lol
@@BoBuilds it’s getting so bad, that tomorrow I’m going to look at a 97 Camry for $1k bucks to get me to work
I have to park O’ Big Black for awhile until Biden gets his sh*t together
I took my cam out and put the factory back in 😥
I had a rebuilt 5.3 put in my 2003 Silverado with what I was told had a stage 2 cam.It sounds ok but I expected a better chopping sound.Now the truck runs but a battery not charging light keeps coming on.The guy doing it is still trying to figure that out.Where are you located?
You talked me out of a cam swap, then brought me back at the end. ‘03 6.0l w/113k miles…
If you have good oil pressure your cam bearings are fine. Unless you look at them... Then you're screwed...
I know right! Just don’t look at them 😂
Not to mention if you tune it yourself, $300 for hp tuners and $300 or more for a cheap lap top
Yup had a shop quote me $1600 & I supplied all parts. After that I took the weekend and did it myself.
Where do you get hp tuner for 300?
I see them online for 3k plus
I have a 2005 silverado 5.3l it has 162,000 miles my oil pressure at idle is alil under 40 I'm thinking about doing the new truck norris nsr cam wondering if I'd be safe
It would cost a little more for me because I have a truck with dod and would have to do a dod delete along with the cam swap. I’m going with the BTR Truck Norris cam in my truck when I do a cam swap.
sam situation here i have a 2008 nnbs 5.3 silverado and i wanna run a stage 2 but done well with everything and tuning doen myself below 2k
I’m glad you’re the only one speaking out on the cam bearing’s.
I’m looking for a separate block to machine and build out to later swap in the future.
What kind of increase in power did you get out of all that?
I did a electric fan swap and I used hptuner to activate. I would like to do more and document.
You swapp a 4l80 right?
What can do you recommend on a daily ? Stage 2 or 3 ?
Stage 2 i daily a stage 2 cam truck
how to buy a tuner and how to use
Money
👍👍👍👍
Can you make a video on how you do a turn?
info to contact you.
I wanna do a cam swap like this. Not to radical and it sounds greeeat
I'm thinking about a 292 or 297 duration with .501
In the future if motor it's still guuud
Is the truck lower in the rear
Yeah just drop shackles
great video
I have a question
My tukkk 04 sierra 4.8 :)
Has alot of miles.
It ticks some times when for example driving in my apartment and slow down for a speed pump and idle thru. I don't know if it's a lifter. I replaced rod bearings, oil pump a few years ago. Because it ticked. And it stopped ticking. Bearings didn't look bad when I replaced them. Any idea
U are literally right on the money I got like 3200 in my lm7 but unfortunately I didn’t shim the converter and my bearings are gone how much would it cost to take a bare block to someone and get new cam bearings and new crank bearings and the bearings on the rods basically all new bearings and I’ve already torn it down and the crank looks pretty screwed as well
Local shop wants $3,200 for labor. Another $1,500 for tune. That's me buying cam kit separate. Seems crazy to me.
Wow, for this generation Silverado I charge 300 for cam and springs lol
5th gen camaro ls3. Claim he has to drop the motor or pull the front clip
@@BoBuilds I pay cash if you're willing to travel and think you can do the job. I'm serious if you're interested. And definitely more than the 300
@@BoBuilds I'm in the houston area bro lmk I ll pay u
Its a chevy drive it long enough and youll end up replacing all those parts from it breaking down on you
That’s true about anything. Be a mechanic long enough and you’ll learn every make and model will fall apart sooner or later lol
@@BoBuilds he must not work in a shop cuz Chevys are bulletproof compared to FCA junk and EcoBooms lol
Oh yeah, I’ve owned a 5.0 mustang with that infamous coyote tick and have worked on plenty of low mile eco boost with cam phaser knocks and waste gate rattles lol
You're confused with Fix Or Replace Daily.
@@OOICU812 🤣🤣🤣🤣😈