How To Paint A House With An Airless Paint Sprayer
HTML-код
- Опубликовано: 15 авг 2017
- Airless sprayer tips and how to spray exterior house siding. Simple paint sprayer tips to paint like a professional painter. Tools used in this video are below: Paint Life Store: paintlifesupply.com
Respirator: t.ly/gZvYm
Kraft cardboard shield holder: goo.gl/daEqFN
Home improvement tips, tools, projects, hacks and more! Oh, and how to paint a house for the DIY or professional painter. You home repair headquarters.
Disclaimer:
Due to factors beyond the control of The Idaho Painter (or Chris Berry), I cannot guarantee against improper use or unauthorized modifications of this information. The Idaho Painter assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. The Idaho Painter recommends safe practices when working on any structure and or with tools seen or implied in this video. Due to factors beyond the control of The Idaho Painter, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from use or improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not The Idaho Painter. Хобби
It’s as if the worlds nicest cage fighter decided to go into the housepainting business. Appreciate your work. i’m tackling my first house painting project today. i’ve learned a lot from you. thank you.
Lol
That question you fielded about start and stop marks and how you answered it was a game changer... Do more on start and stop marks
You are really a great person. I am happy for you and the success of your career.
Incedible nice job I love paint sprayers, my husband is a professional painter he just bought a professional paint sprayer,..Thanks for your video..
Just picked up a Graco X5. Your videos are helping me immensely!!!
Very informative Channel, Rock On! After watching some of your videos, I'm considering going into the painting business,
Great video good explanation on how to use an airless paint sprayer many thanks from Queens New York 👍🏻
Im a business owner in Nj been following you for years. Great work man
Thanks for your tips, painting the exterior of our business location soon. Your videos have really helped, all the best.
Your the best. I keep learning all the time.
Great videos mate very good information and tips thanks.
I just bought a Magnum true airless Graco to make my job easier and I'm half way done i would of got the house done but the rain was threatening me so lucky I stop but I didn't want to stop i just wanted to keep on going I love it.
Get a Graco cleanshot shut off valve you can move tip up and down for different angles
Great video, thanks for sharing!
You are welcome!
My landlord Just bought a Wagner 250 pro I think. I have been working with spraypainting in a door factory. Im gonna help him spraypaint His house now.
Thank you so much sir for sharing. Looks so cool. Cant wait to help him spraypaint the house.
Peace, from Norway🇧🇻
That's awesome
Great video man! Thank you! I was having so many problems with start and stop overlap lines. Thanks for the tips.
Thanks for watching!
I am the painter the best one the Fresno
Appreciate all this info. What type of sprayer do you use?
Very good tips thank you
thank you for the tips i m working on my house now in have a lot of old paint
Thanks for watching Jose!
I enjoyed the 30 inch wand yesterday. Helped alot. Was super awkward up high on a ladder even with ladder arms but it went well. Definitely more fatigued at the end of the day since I'm not used to using the wand. Should get easier as I keep using it.
@captainpaint101
thanks man your video help alot 👍🏻
Great video. Love the info. Thank you from Oshawa Ontario Canada
Thank you
Good afternoon! My name is Rodrigo, I live in Brazil in the state of São Paulo. I have worked with paintings since 2005 and managed to buy a national Airless machine. For a Graco 390 Airless is costing about 9 thousand reais equivalent to about 2,700 dollars. The tax for imported goods is too high so I bought a cheaper machine! I signed up for your channel because I really like the way they work and I learn a lot, even though I do not know any English. GOD bless you and you have won another channel subscriber, sorry for my English that is from Google translator.
Thank you for the support it is much appreciated! Check out our giveaways on our website at www.theidahopainter.com
Home Improvement TV Okay!
Oi! Sou Americano aqui. Tenho esposa Brasileira, morrendo nos Estados Unidos. Frequentemente viajar ao Brasil. Coisas tá muito carro aí né? Há airless paint sprayers chama “Krause & Becker” aí? Não é professional mesmo que seu Graco, mais o meu funciona muito bem (sou não professional), mas o preço é muito bem. (desculpa o meu portuguese cagando. aprendendo). Boa sorte amigo.
Yes, imported things are SO expensive in Brazil.
Hopefully we can get a exterior repaint video soon if you can for us Chris.
Great info. You teach a lot.
I appreciate that!
I would use a graco shot of valve with the length of extention
Excellent work!!!
Thanks
Thank you
Love your videos
Awesome videos I subscribed do you have to put primer?? Also how do you paint the top of an angle if is really high near the roof ?
Great video....thanks for the tips...
Thanks for sharing 🤙
Im not even a painter and love your videos, very informative
Glad you like them!
@@Idahopainter are there any vids on thinning paint and or primer. i cant seem to find anything in regarding airless
I'd love to find a educational video from you how to brush and roll wood exterior.
Great videos! What is the best type of ladder for a 1 story house? Any particular features to look for that are worth spending extra on?
Thanks for the vedeo what type of water proof paint can you recommend for an adobe house for interior and exterior
What about wide areas 20’ wide and please More details on operations of sprayer adjustments cleaning exc please, I am a 1st time sprayer 77 in Colorado today and getting it done today My friend Thanks 😊 Former constant work hard brush painter.
Do you think adding an extender to the paint when you have to spray on the sunny side of the house would help with lap marks and possible bubbling issues?
you are the best
Just use it with out extension for the lower part that way you can point it to the under edges the use the longer for uper
Apologies if you've covered this already, but do you happen to know, or have a rule of thumb, when it comes to determining how much paint is needed to spray vinyl siding? Aside from what's on the can obviously. Just curious if there's a trick to the trade when estimating something like that on a 1500sqft home. Thanks!
Do you have to thin out your paint? What type of paint do you use? How far should you hold the paint tip away from the paint surface?
Do you prime the house before you paint and what type of protection prep do you do before starting?
Well the 1x4 trim that is used not on a corner, window or door trim is something not common in our area. It helps you find a start and stop point but we typically use hardy plank siding and the house won’t have random trim pieces, in random spots down a wall, to have this luxury when spraying. How do you start and stop on a 60’ wall that doesn’t have these?
Good
Maybe you should cover that AC unit from overspray.
If he know how to use and ajust psi on sprayer its bo necesary... he does a garage door with he's truck in the driveway he realy know what's he is doing..
lol get a life
Good job Chris , keep up the good work✌🏻️.. See you Monday
I am the painter text lucio
I am the painter Luis
Who are the best painters in Fresno lucio Yanez
Chris bad. Job
It's better to hit the corners on point first with a horizontal spray pattern, then spray the walls out towards them working from the top down. The paint distortions are called "dry laps" and areas where the coat is too thin are called "holidays". It's ok to spot check the product with a "wet mil" gauge and follow the application recommendations. Back rolling/brushing is not necessary when the prep is done properly and all angles are covered. Rolling scaffolds are preferred over ladders when painting most walls. Long tip extensions should only be used for very hard to reach areas and use a smaller diameter "whip line" at the last few feet of spray hose on airless and conventional sprayers to help reduce fatigue on continuous spray jobs where it's not uncommon for a painter to spray 25-50 gallons a day depending on hours, wind loss and mil density. When painting the side of a steel building like a power plant or factory from a "window washer scaffold", each pass from the top to the ground is called a "drop". One could also encounter several "drops" on a large house from a ladder or standard scaffolding. Try to avoid dry lap on the previous drop. Stay very aware of wind direction when spraying outdoors and avoid overspray blowing on all visible roofing and on other peoples property, especially automobiles. Even when running crews of up to a dozen industrial painters, I still grabbed a gun and painted right along with them and preferred the shorter trigger myself. I was in the paint business for about 25 yrs before I switched trades and became a control room operator at a power plant and have seen my share of product, equipment and technique on all types of surfaces including automotive. Keep in mind custom paint pays the best rate. Stay safe, keep your gun clean and your paint strained! Cheers!
Yes, thanks for watching!
damn, dropping some knowledge lol thanks
Yes sir. You seem to have it down.
So if im spraying a house and both trim and body get painted, do i spray the trim first? Or do i spray the siding/body first? Thank you for the input and your knowledge.
@@kensummerfield7899 Always spray the large surfaces first so even if the paint gets on the trim it it's not an issue. Then paint the trim by cutting it in with a quality brush of the type purchased from a paint outlet rather than a big box store for best results. A 3 inch sash brush with polymer bristles for water borne paint or a natural bristle for oil based paint will suffice. Very straightforward process. Feel free to let me know how your project is progressing and don't be afraid to ask any questions at any time. It's always better to do the job correctly the first time. Quality painting can be very time consuming but that's what separates true painters from "wanna be's". Kind regards. Ray L.
How many coats do you spray. Can you give some scenarios. In guessing one this time because you primed?
Thanks for everything you do Chris.
Peter Piper 2 coats
You should put a shot valve on that extension,will stop those blob coming out when you pull the trigger. hi from nz.
Awesome, thanks for the tip!
with the shot valve you can correct the angle if spraying the lower part and the highest part as well.
Nice
Why a 2200 psi setting ? In your other video u said 1500 psi (1000 at the gun) was ideal for 515tip?
How do you handle spraying interior walls where the ceiling is about 50% higher than a typical bedroom wall. Would you spray horizontally and work up the wall that way by using a raised platform as you get higher and higher up the wall? Or would you do it vertically and go up as far as you can and then get on a raised platform and then spray the second half vertically. My guess is horizontally like you are doing in this video.
Hi Chris, so is there best practice or situations for starting on bottom and work up vs starting up top and work down? Or do you always start from the bottom?
Just watched John Malkovich paint a house.
Noyce job on the spray
was going to say I didn't realize John Cena did painting in his off-screen time
ROFLMAO
Getting ready to paint our asbestos siding old farmhouse...aproxx.5000 sq. feet...thank god I have access to a lift...great video
Thanks
Sherwin Williams has a paint for spraying vinyl siding is it any good and have you ever painted vinyl siding
Which do you think has a higher coverage in terms of sqm per gallon of paint, the use of airless or by manual paint roller?
You say 5-15 tip at 2200psi. Is that the psi just after the point the fingers disapere and taper? Also how long does that craft shield holder last b4 it wont lock in anymore and just flops up and down. Never had one. Thanks
Been spraying about 30 yrs with a different varieties and types ladder hoping has saved me a million miles on my knees lol lol😆
Quick question, why not use scaffolding with wheels so you walk that length with more ease?
Do you do any back brushing or back rolling?
I am new to spraying, picked up a new titan 440 it came with a 517 tip. Is this okay for exterior siding? What is difference from a 515 tip?
Cool
You are the man! Thank you sir.
Your welcome thanks for sharing!
thanks buddy.
You are welcome!
@captainpaint101
what kind of sprayer is that? it works well
Question how can you fix a leaky spray extension and yes it is screwed tight
If the corner boards and window trim is to be a different color , which do you paint first or do you just roll the trim after painting the sides?
James King you mask them off if there is a major colour difference or you can just stop short and brush the last section of board close to the trim
I tend to rather tape it off then brush trims in
Graco silver plus gun is the best out there.
thanks.
Thanks for watching David!
Funny how many people here
Listen to reply not to understand
I've learn several tips from him
I would like to see a review on the titan sprayer guide.
I used it couple days ago and thought it wasnt what I expected but, I can see how would be useful for outside painting
Thanks for the support!
Did you add prime first and then painted. Or just painted with paint and primer?
Would like to see a vid on how you would tackle a vinyl siding job. Have you guys done some in the past? Do you usually stay away from painting vinyl? I know most people advise against it, but I suppose it's a cheaper alternative.
We do paint it, you need to use vinyl safe colors though
Thanks for the response. Have you had issues with customers painting their vinyl siding in regards to it not lasting?
If using sherwin williams paint, use superpaint or higher quality, like duration or emerald. Be wary of darker colors that use black pigments in the formula. Darker colors will warp the siding. This is why most vinyl siding houses use lighter tones.
What if you have to spray the trim and siding with 2 different colors? White trim and dark siding. Do you paint the trim first or the body/siding first?
Thanks for the video as usual... LOL... My wife wants to know the EXACT brand/color of grey you used for this job... We will be painting our house soon, and she is going thru tons of color samples.
Do I have to back brush or back roll on T111 detached garage?
Ladder hopping lol memories
Ugh---- the homes here on the west coast of BC in vancouver are 3 stories high, acrylics, stucco, hardiboards, cement boards, all sorts of peaks and valleys, no ladders hopping allowed due to being watched by wcb in the city , steel toed boots all the time,proper scaffolding that conforms with wcb, lowest voc paints,They'll shut a company down in a heartbeat.Very expensive homes in an expensive city. Lots of competition, tough to make a decent buck unless you specialize, with stains, etc. Spraying a shed like your doing here is rare here. Good video
I’ve heard you say back-rolling produces a better quality. Do you bid differently with and without back-rolling? Does the customer know or care? Thanks!!!
Depends on the sidings
Yeah, rougher siding you want to back roll. Manufactured siding like this you can usually just spray. Though sometimes when it gets old and weathered back rolling can still be good. It forces the paint into any weathered areas or micro cracks like in cedar or around nail heads.
What you think about wagner 250 r its good for beginner?
Yeah risk your life to avoid lap marks? How about feather the fan in and out of each section and don't pull the trigger directly onto the surface. The initial burst of the sprayer when you pull the trigger is higher then when you hold the trigger down. Do not start and stop on the substrate and feather it out and you won't have start stop marks or heavy edges. BTW that wand is way overkill man lol
Can you use a 515 tip to spray interior walls?
Multiple ladders with ladder jacks and planks you can just walk side to side.
@captainpaint101
Nice intro you use now Chris, good video a usual. Looks like fence behind you could use a little attention.
I ladder hop as well, I was wondering if you did. Only for those who are comfortable and like rock climbing.
A few of our workers might
Does that sprayer works with oil based paints??
In order to apply an even coat of paint the gun must be pointing perpendicular to the surface being painted throughout the entire stroke with half fan overlaps
I was thinking the same thing. Which he can't do when he uses a 30" extension like that, right? But it seems to work for him. what do you think?
@@mrjessephillips yes i think it works for him, exterior paint is not as sensitive to this concept but when spraying indoors on a smooth surface and lights shinning it will definitely matter
Since you are spraying upward, how do get coverage on the top lip of each overlap? Do you do a second coat and spray downwards or just back brush? Thanks
Psyop Factory my siding has a square edge on the top and bottom lips. What is the best way to get full coverage on both?
Brian Peterson what you said before would take care of the problem you asked about. Just a bit more work.
yea thats what Im talking about put that pole away OMG this is funny.
Don’t remember if you said this but how many coats do you put on a house normally?
Do you have to add two coats are is that your preference
What circumstances warrants the surface if it's drywall , wood or what ever surface it is to use primer??
So this is a technique for a house painting that has the trim the same color, or are you going back and hand rolling / brushing the trim? Nice video.
Would it be better to use a Scaffold?
Using the 517 ttip and 2200 psi, how much coverage are you getting per gallon
Do you have any tips for handling customers questions about the number of coats that you’re applying? If you can do it in one coat when spraying, how do you handle the customers question when they ask you if you are going to apply a second coat?
We just explain that a high quality paint will cover in one given the right circumstances. If it needs two then we will do two
I will be applying paint to stucco, any recommendations on sprayers and nozzles?
Aaron Williams backroll it with a heavy roller sleeve
Palmer Palmer I almost saw a tear in his eye!!!! HOAX!!! He looks Spanish. Soak it up Jussie!!!! Hugs? Really
So how does a air less paint sprayer work and what does it look like . Your title says something about airless paint spraying
2 questions, do you get spits with you 30 inch extension? I watch closely and can not tell, even when you stop and go at tradition points.
I have a 10 inch extension and sometimes I do spit and sometimes not.
2, how can I safely paint a gable wall that sits above a steep metal roof? Thanks for your help. I have spent hours watching you videos.
Thank you for your time
Use Graco Clean Shot to get rid of the spitting.
Home Improvement How To's im a new painter i watch your viedeos for tips
Thanks Chris
Thanks Chris or company
Hey man! So many cams records you, more than in hollywood blockbasters...)))
Just one coat of paint after the primer?
How do you do the grooves if they are vertical
I'm thinking about finding myself some drywall stilts to skip the latters.