Видео

Can you hdmi to sdi adapter? E.g connect hdmi cable to camera and other end to connect to black Atem to sdi port. Is any issues if you have mixed of hdmi and sdi ports?

Really FoKaMoooo? There is written FoMaKo.

How can you connect a mixer to my camera? I want the sound of all the microphones to into the camera while I'm streaming

It could be a bad camera but the controller and the cams all need to be using the same protocol.

I was eyeballing this under the Fomako brand at the same price point. I currently have the similar one by Hsility unfortunately that one only does onvif while apps like OBS and Companion and many others use ip Visca. The on-board view was game changer for video production on the Hsility. Being able to program one button presets on a Streamdeck became more important. So I wound up using a different controller without the video preview but had Visca.

Oga you talk too much

The 20 M/sec delay (latency) between each of the four ports kinda sucks

Hi, thanks for the review...you are really helping us narrow our options. Quick couple of questions: How have you found this camera to perform in the long term...it is still holding up after a year now? Also, does this put HDMI out at the same time as NDI...and is audio embedded in those outputs? Are there better PTZ cameras you would recommend at a similar price point? (ie something from FoMaKo or SMTAV) Thanks!

Is this usb plug and play, will it require software to be installed into your laptop or pc?

Need to look at the Prisual line of cameras. They are PTZOptics clones at a much more reasonable price and great tech support. We have used four of them to live stream our service each week and we are very happy with their performance. I use mine with Ethernet for the PoE and control function and SDI for the video. Additionally we couple them to the PTZOptics G4 Joystick controller.

9 minutes to tell me that when you took it out of the box it did turn on, and that's all?👎

So this video helped and it didn’t. It’s what everyone who has the Sling Studio already knows. When you factor in $800 bucks for each Hollyland, you are now at $500 more per wireless signal. I am thinking Ninja Atomos X cast for hard buttons and Yolobox Pro for overlays. The only downside there is ISO recordings or lack there of. Sling handled all that program, inputs everything. It was truly a remarkable product.

Years passed and no one offered the solution like sling studio #Slingstudio

How can we press for sling studio to return, the page is still active even though sometimes it goes down but for some reason they continue to maintain it, they just don't have any contact number

God job I have a question 🙋‍♂️ Can I Connect a HDMi Cable from PTZ to my Switch and connect at the same time Ethernet cable to PTZ control in OBS? OBS has a plugin for PTZ controller but I don’t want to stream from OBS I want to stream from the Switch and Controller from OBS

Very helpful video; thank you so much ❤

NDI solves a lot of this. Lots of cameras are now coming with that built in. And with the NDI camera app, your phone is also now a wireless camera that can be ingested into things like the Director Mini, Yolobox Ultra, or by using a Birddog Play NDI->HDMI receiver.

Are youtube and sling studio incompatible? I cant live atream.from.youtube with my sling studio.

Your mic gain is too high. Nice PTZ camera🙂

a cheaper approach than ATEM and a Control Keyboard would be a stream deck and then use OBS with NDI. You can use the streamdeck for a controller/switcher/everything.

Great video! I’m trying to decide on a PTZ NDI system for my church and your videos have been the most helpful (though I’m still feeling lost and need to do sooooo much more research!). Thank you!!!

DJI should make a 1inch sensor PTZ. they would own the market.

🤓Hello 😰HELP can i turn the Auto Tracking off? does it record sound if not how do i record the sound?

that splitter is a potential loss creator, impedance-wise? - better wqithout? - maybe w'washed-out .vieling will be removed?interesting video. is there a backward-compatibility issue.limitation-penalty, using fibre-equipped HDMI cable?

Wireless is easy. But the ability to use iPhones as wireless cams was amazing. Are there new systems that do that ?????

If fiber cable used to extend hdmi ?

ho dimenticato la password come faccio a riprenderla ?

come posso resettare la camera senza pc ?

Thank you so much for the videos on the Chameye gear. Just in case you haven't seen is that even 7 months later you are still one of the only (and probably the most comprehensive) video explanation concerning this gear. Butttt........................ Not unlike thekinetictvfaithinmotion4453 below I had the same problems. I have the Chameye E300 controller and the Chameye PTZ C730N PTZ camera. Take away the computer. Take away WiFi. Forget the mind blogging failed attempts to login and change IP addresses. These two pieces of gear operates on the VASCA protocol so attempting to change ONVIF like you suggested in your video appears to be futile. I am using a MacBook Pro (or was). I've tried using the RS232 serial port cable just to control the camera, and nothing. They just don't take to one another. The only thing that works is HDMI out, the PoE port for power, and the remote for the camera. This is not a plug and play unit. Now I am not as well educated and astute as you obviously are, but this has been more frustrating than setting up a 4 camera remote program for a television news station. I can't give up because too much money has been invested. I don't need to stream live. I don't need to add fancy graphics. I could care less (right now) about doing Picture in Picture. I want to shoot a small event and record it. I just want to be able for these two pieces of gear to work as designed. I have no need for all the fancy tech stuff. If you have any ideas or suggestions, man I'd really appreciate it. I've laterally spent days trying everything I can to get these to work. Can you help a fellow wanna-be techy out.

What are the pros and cons of USB ports and why do some people only have USB .

how do i fix my Camra when it goes dark?

Dude, PLEASE stop putting the word CHEAP in you titles. I have yet to see you review an affordable camera!!!!!

Maybe you should add live stream into your RUclips account

hello i have a question, can you add ndi to any ptz camara even if is not any of the mayor brands? thank you

How much

Very well presented. Thank you. I have a question. For audio to livestream, do you take the sound from the main mix or do you have a separate mix for the livestream?

Why does mine keep saying connecting failed every single time

Another great video. We're going to attempt 4 PTZs over OBS and while I was trying to avoid an additional switcher due to desktop space limitations I've been considering this. I really like the flexibility of it. I would pick the XL for the cost. It's $200 at the lowest point now, but it jumps between that and $250. I'll let it drop before I pick it up and give it a try. That'll give me a few weeks to setup my scenes in OBS too.

Can vertical orientation? For tiktok o instagram live

I've been trying to decide between the two different NDI models that AVKANS makes, so this is helpful. I like the import/export feature to set up multiple cameras quickly. I think I've settled on this model.

This video is very helpful. I'm considering buying 4 PTZ cams from AVKANS and getting this controller along with them. You have the best video overview I have seen to date. Thank you for the high production quality from an experienced presenter.

i want a wired option. whats an inexpensive way to go

I'd get the Atem Mini Pro instead of the cheaper Atem Mini since it can also stream and record to USB disk at the same time, replacing the need for a laptop, which is what we do at our church.

Could I use this with Apple TV ? And have full control of it with I r

The best advice no one else offered! Thank you!😅

If your PTZs are placed around a large room, you'll need sdi-hdmi cross converters x 2 per camera this gets expensive and maybe nearly worth the sdi version. Anyone recommend any cheap and reliable cross converters other than the BM ones. Or has anyone amy other ideas? As in can the camera feeds run over ethernet to a hub at ops and from there be converted to HDMI to go to the switcher?

Hi broh,I have the FeelWorld USB 10 camera, with the controller I can't connect the ip, When I set the IP it says connect error Visca! Please help me

this was great. i was a beta tester for slingstudio. i was always blown away by what it could do. this is truly a great reason to keep this 2009 Macbook Pro and an older iPad in my arsenal

Good information but not so affordable but it is actually worth the price

How to setup this same camera on a MacBook Pro?