Видео

absolutely no problem with that <3 thank you for the compliment

The chords are played via MIDI, the melody via the touch surface. You could of course do it the other way around as well - improvise chords on the touch surface to a melody or bassline you play into the MIDI input.

@@MakingSoundMachines edit: actually now that I think about the voice stealing with midi, I’m not sure, since over midi I’ve seen you can play tight chords with notes one semitone away, so it might be addressing the voicing differently. I’ll try it out later today with my M8 doing the midi chords/leads. This is great. I imagine you have to reserve a string or two for the lead so you don't voice steal? Or if you are doing it the other way around with midi lead and manual chording you would use notes in the range of a few strings for the lead and leave the rest for chord play. Does this also work with the built in sequencer in play mode? When I tried it I think I got confused since I was likely stealing the voice/string that was being sequenced.

Patching Panda Hatz, with coloured noise as an input (from Patching Panda Shuby).

Yeah .. every case imaginable is about 8HP too small, isn't it?

Yes restocks for all shops are being sent out starting tomorrow.

@@MakingSoundMachines Great to hear, thanks!

@@mikeleuzElevator in the UK are taking pre-orders.

Hahaha thank you!

Thank you! And thanks so much for testing the module before release!

@@MakingSoundMachines You're welcome! It was big fun and a great pleasure for me beta testing this little treasure. At anytime again!

Plinky v3 integrates TRS MIDI input and output directly on-board, so you sequence polyphonic chords externally and play a melodic line on top on its touch surface. You previously needed the the expander to do that. The revision also upgrades to USB-C, optimizes the build experience (LEDs, headers, sockets, stereo jacks pre-soldered), and introduces improvements to the audio path (less noisy).

nk tha u yo

Huh yeah looks like as of today, Thonk sold out of Plinky kits. ETA for the next round of kits is August. www.thonk.co.uk/shop/plinky-kit-001/

Hello! Get a kit from Thonk, full V3 kits are available here and they feature USB-C, TRS MIDI and a much easier build than you see here. www.thonk.co.uk/shop/plinky-kit-001/ You can find the new build guide here, LEDs come pre-soldered for the front panel now and you don't have to solder the headers or screen anymore. plinkysynth.com/docs/build-guide-black

Thank you! It's from an album Enrica and I made ages ago. It has lots of piano and some electronics, this track feature lots of Bass Clarinet though played by Simone Weber. The music we make has evolved with our modules now, but it's still dear to my heart.

@@MakingSoundMachines yes, love that bass clarinet! thanks for the reply. looking forward to your recent music. btw, i'm getting myself plinky (soon). just want to say thank you for making it available again. cheers.

Thank you! Absolutely loving the presets you made!

@@MakingSoundMachines They ARE really amazing. I think we now all must stride to produce even more presets to make this little wonder-box really open up and shine.

The big LED panel replicates the display part of Stolperbeats - it's connected to the module in the bottom row via i2c and mirrors what's going on on the small display. Only two of the large modules are in existence: the one you see here, and we bring to shows like Superbooth, and a second one that's available for the public to play at Look Mum No Computer's This Museum is (Not) Obsolete ruclips.net/video/kr69QIOa0C4/видео.html

Haha yeah we need to make that into a finished module at some point.

Awesome that is fantastic to hear! I would love to hear what you come up with, making a hardware thing is an interesting and worthwhile journey - keep me posted on where you end up with it!

@@MakingSoundMachines I certainly will! Also I would love to support you guys further. Unfortunately I can't afford a kit right now, and I can't see a Patreon account but please let me know how I can show a little more support if you get a chance. THANKS AGAIN!

Haha welll .. next one will be darker I promise.

@@MakingSoundMachines 😳

Oh thank you! Just had a quick listen and I really dig it! What are your favourite Lorn tracks / what's your favourite album?

@@MakingSoundMachines I'm super into the album A/D right now. A little more ambient and chill than his other stuff. I'm digging into his sound design process. It's inspiring...and overwhelming. These Meska presets would be a huge shortcut, though it's probably worth learning to do it for myself.

@@NickVu Awesome will check that one out! If you are curious about the sound design, Meska published a walkthrough of the 32 presets here ruclips.net/video/zXjph5cix2g/видео.html - and also patch breakdowns for a couple of sounds, you can find those collected here plinkysynth.com/docs/play-guide The patch from scratch type breakdowns could help you recreate some of the sounds in a DAW - you'd need a flexible Delay / Verb and a crunchy saturation to approximate some of the sounds.

Hey thank you! yeah I love that it's possible to perform and record a little piece like this in one take! More fun than putting it together in ableton and drawing automation for sure (done a fair share of that in the past as well).

Thank you!

Yeah it's really fun to play! It's worth checking out the presets, they do some great tricks with feedback - or if you want to build your own, check out Meskas build from scratch patches in the play guide! plinkysynth.com/docs/play-guide

;)

Thank you for making such an awesome, inspiring instrument! It's like a little black rectangle of joy!

Hey Alex nice to see that you guys continue to produce this amazing module. For me always my favorite in my rack since day 1!!! I own the V2 I think ( it’s was the first batch builded by LPZW) Just wanna know the difference between my version and the new one ? Can we update the firmware to have the same or it’s also a brand new electronic module? Thanks a lot again and you have no idea how your module and Discord plinky discussion saved my mind during pandemic though time !!! Vive Plinky et vive Alex Evans 🙏

@@manublond118 Allow me to jump in and answer some of your questions - Firmware as well as Presets are compatible between all versions of Plinky so far, V1, 2 and 3. Find Firmware, presets and install instructions here - plinkysynth.com/ Upgrades from V2 to V3 in a nutshell: - USB-C jacks - TRS midi is now on Plinky itself, before it only used to be on the Expander - Updates to the build process (build is easier, screen can be plug and play replaced) - improved audio path I think with a V2 plinky you are golden, the big update is the onboard MIDI, but USB (client) MIDI works on all versions. If you do an update, make sure you only power from one of the USB _or_ Europower at any time, not multiple at once.

yes great to meet you too! thank you for stopping by!

Yes! you need a Plinky, but the presets are free here: plinkysynth.com/presets/

@@MakingSoundMachines Yes I understood! I have a Plinky! Thanks for sharing!

@@jonwtr Haha got it!

Thank you! watched your Plinky video review and walkthrough a couple of times now - thank you for making that!

yeah mmalex really knocked it out of the park! keep discovering cool stuff every time

they are contacting the waitlist now, so you should get mail soon!