Видео

My Model X said, "Vehicle may not start" service required off and on for 2 days...Im at Target now and all screens are black 🥺

Good Job! Your upper arm has debris clogging at least one of the holes on the end of the arm which can be seen at the end when you rotated it to show how it was turning. Make sure all the nozzles are clean as they also provide the pushing action to spin the arm. Clean them out and I bet it will turn even faster.

Someone commented below that the battery has negative on the sides. I put a meter on the top and bottom and side and only got a reading with meter on top and bottom. There is no negative power connection on the side of the battery. And mine also came from the manufacturer with the metal tab bent downward. They are installing the batteries incorrectly. I had to go through one more step than you outline - I had to exit setup and start again before it would recognize my sensor. "Try Again" did not work. Thank you for this video! Sensor is working now!

Thank you!! Thought my dot was done 😊

Dude you saved my ass thank you so much👏🏼🤞🏼 I’m new to Tesla and I have a sensor issue but I was able to unlock it with your instructions! I didn’t realize it locked like that! Thank you sir!

I used alcohol on cotton swabs wipe off the contacts

It wasn't tested if that noise stopped or still there! 😂😂😂😂

27 secondes

Same frig as yours. Ice trays empty. What should I try first?

Thanks for making this video My laptop is working perfectly fine I'm trying to change Boot mode to legacy but it's grayed out I even tried setting supervisor and user password and it didn't work If anyone knows how to fix it, tell me your solutions

Not working

Hello dear mine is very hard to move

Thank you so much. This fixed my issue.

Thank you for the video. When I went to remove the screw, I noticed mine was already cracked there, so I'm guessing that may be why the spring came out in the first place.

what is the procedure for adjusting the ice cube size in a frigidaire professional refrigerator?? (model FPBC2277RF5 )

Thanks I was about to trashed it. You are awesome!!

Grand USDC làm sao?

It worked, thank you

Cut part out of a milk jug, much thinner than a card and it worked

You saved my money thanks!!

It worked. Thank you

A very good detailed video. I think if I had to do this I could by following your instructions. I am curious though, how do you know if that pump is not working properly? I saw somewhere that you can turn the dispenser off for when you'd like to use tablets or something other than liquid detergent. How do you turn that off and or on? I think we might have inadvertently turned it off because sometimes the clothes do not seem to get cleaned. Anyhow, I can't seem to find where I saw that and figured you'd have a quick answer. :-)

Thank you!

Absolutely unreal. I watched this before contacting my landlord or a repair man and fixed it for zero dollars. Thank you so much.

How do I resolder it? Do I just put a big glob on it?

Thanks!

Thank you! was so close to calling an appliance repair person!

I troubleshooted with ecobee and they said it was a software issue.. I did this and got one of the two sensors to work! I only needed one so I’m super happy with that! I almost bought a new thermostat

❤❤❤❤❤❤worked THANK YOU

This helped! Thank you so much! But how did you get it out???

Bless you bro! 😢😅 Finally

When I did the maintenance and going down to 26, it says my ice maker temperature is 57 f. How do i fix that?

Thanks

December 2024 and this tip works! Thank you for the great video!

Big help, Thank you

Had the dispenser replaced within the first year of being new. That did not resolve the issue. Thanks for the video. Hopefully this resolves the issue. Also cleaning out the lint filter on this machine is horrible. I will never purchase a Maytag Appliance again.

Beware of the large capacitor in your microwave. It can stay charged and be dangerous for weeks if not months after the unit has been unplugged. Should be able to short across the terminals with a insulated screwdriver and wearing thick rubber gloves. This is the reason many microwave ovens have tamper resistant screws. The average homeowner should not be messing around inside them!

THANK YOU SO MUCH. Had one in it's box for a few years, and nothing else I had tried worked, just a couple minutes of fiddling with it while holding the power button it charges no problem!

Thanks a bunch! Helped me out!

Dumb

Thank you this is really helpful ❤😊

Thanks!

worked! Thank you.

fixed it! thank you so much!

Yes...thts 100% working...press power button then connect and disconnect to charger...after flew attempts watch will be alive again.

This video was a lifesaver! It was exactly what we needed when we needed it!

After a coupe seconds it powers off

Thanks for this video I was wonder if I could fix it.

Thanks for this video! Spring came out when cleaning and couldn't put back together.

Thank you so much for this help ,super job