The first guy that actually explains the use of the drag bar and adjusting the height of the tires. THANKS! It was a little tough hearing you with the thing running but🎉
Thanks .... I found a free 5hp front tine tiller & it just needed the water dumped out of the gas tank lol starts on the 1st pull & I love it. Thanks for the pointers here. It helped
Great video dude. I havent ran a front tine tiller in 20+ years, needed a quick refresher. My old tiller doesn't have the drag/depth bar behind it anymore, and it literally beat the living bejesus out of me. I will have to find or fabricate one.
Keep the same video but..... Personally I would talk at the beginning to explain an overview quickly. Warn about starting the motor. Start it and run it a little bit without comment, then cut the sound and dub in your voice. At the end, I'd go back to the motor sound and go a little further with the machine and close out the video. I like the basic demonstration. All these videos are helpful.
Great job. I was fighting my tiller and this helps a lot. The folks that complain need to take the time and effort and make their own video rather being critics no one wants to hear from or just shut up. I really appreciate the video. It will help me in the garden this year. Thanks.
Nuts. If you're going to do a video, do it right. If he were showing how to tune up a car engine while it ran through open pipes the demonstration would be nearly useless.
While i do take away some helpful information from this. Most people (i know, i know not you) watched this video hoping for instruction. The people who are complaining are unable to make their own videos because (like me) they are looking for a little help understanding the most efficient way to operate a front tine tiller. Glad you got all the help you needed from this video. I found it more helpful than not. Thanks for hearing me out.
exactly paul . kingdoms become full of a bunch of degenerate idiot cry babys that are corroding away at the performance and lives of others . time is near for them to be shut the hell up .
really couldn't hear much but I got the idea, for better control keep that bar down into ground and use the wheels if possible. Got it right? thank you
Not sure why others could not hear you over the motor. It was harder, but I could hear you fine. I think a lot of people just look for things to complain about.
The first guy that actually explains the use of the drag bar and adjusting the height of the tires. THANKS!
It was a little tough hearing you with the thing running but🎉
Thanks .... I found a free 5hp front tine tiller & it just needed the water dumped out of the gas tank lol starts on the 1st pull & I love it. Thanks for the pointers here. It helped
Great video dude. I havent ran a front tine tiller in 20+ years, needed a quick refresher. My old tiller doesn't have the drag/depth bar behind it anymore, and it literally beat the living bejesus out of me. I will have to find or fabricate one.
Keep the same video but.....
Personally I would talk at the beginning to explain an overview quickly. Warn about starting the motor. Start it and run it a little bit without comment, then cut the sound and dub in your voice. At the end, I'd go back to the motor sound and go a little further with the machine and close out the video.
I like the basic demonstration. All these videos are helpful.
Awesome video and advice,thanks so much
love it, thanks mate.
“How to.” Just starts it… thanks for the how to start it part. definitely what I was here for 😆
Thanks for the video and info.
Part of me thinks (or maybe hopes) he did it that way to screw with people. Talk at the start, than during, than end with, and thats how you do it. 👍
Great content!
Thanks!👍well damn. Been using mine with the wheels on 😂
thanx for the info .
Great vid but I could not distinguish which was the correct way? Wheels on or off?
Wheels off
Great job. I was fighting my tiller and this helps a lot. The folks that complain need to take the time and effort and make their own video rather being critics no one wants to hear from or just shut up. I really appreciate the video. It will help me in the garden this year. Thanks.
Nuts. If you're going to do a video, do it right. If he were showing how to tune up a car engine while it ran through open pipes the demonstration would be nearly useless.
While i do take away some helpful information from this. Most people (i know, i know not you) watched this video hoping for instruction. The people who are complaining are unable to make their own videos because (like me) they are looking for a little help understanding the most efficient way to operate a front tine tiller. Glad you got all the help you needed from this video. I found it more helpful than not. Thanks for hearing me out.
exactly paul . kingdoms become full of a bunch of degenerate idiot cry babys that are corroding away at the performance and lives of others . time is near for them to be shut the hell up .
Great video! Thanks for the pointers.
How do you replace the belts on that tiller
I am sure he was giving good advice. Hard to tell with all that Briggs& Stratton music.
A lot of people don't know how to operate one of these. So this is what you do...chug chug spit spit brrrrrrrrrr!!!!!!
Make a video on replaceing the belts on that tiller
Taught an old fart the tricks I needed! Thanks
What did he say?
So is it more or less stable with the wheels on?
I wish it worked like this in Florida. Wheels on or off in this sandy "soil" it just buries itself and I have to push it through the soil.
nice strong tecumseh motor!
ODD THAT NO ONE DISCUSSES THE REAR "DRAG BAR" AND WHEEL ADJUSTMENTS.
Are you saying to leave the wheels on is best???
really couldn't hear much but I got the idea, for better control keep that bar down into ground and use the wheels if possible. Got it right? thank you
I had the impression that it was best to take the wheels off, but you couldn't tell from the audio.
😊 thanks
I am a Montanan !!!🙂
thank you!
Dangit John bet this video would have bn useful if I could hear you
Гениально
Cannot hear you over the motor...
Out of all the videos I watched. You showed some explanation to the depth bar. Need to show which way to set bar to depth.
I could hear him just fine. But...I think he needs a little more cow bell in there.....just sayin'....
captions please
Not sure why others could not hear you over the motor. It was harder, but I could hear you fine. I think a lot of people just look for things to complain about.
I don't have 20-year-old ears anymore.
What did he say after turning on the tiller? Can someone translate? I can't hear anything but the engine.
Able to hear you. Didn't know he wheels were supposed to stay in. I was doing it with wheels out because that's how it was setup.
Good video too bad no one could hear what you were saying
unfortunately i couldn't hear a thing
Well s*** I might just take the wheels off now
lol.....back to the mixing board dude
Lowering the volume of the till and adding a voice-over would greatly increase the value of this video, IMO.
Didnt hear nothing
Couldn't hear a word said.
good video, but i didnt hear shit you said!
I have not heard one word you said with engine so loud.
Don't know what you're saying over the noise of the engine. 🤔
I couldn't hear what he was saying!
No one can understand you with a machine running...