Sprinter 2500 Transmission Service Fluid and Filter Change Including Torque Converter Drain 2020

Поделиться
HTML-код
  • Опубликовано: 24 мар 2022
  • Walkthrough on changing the transmission fluid, filter, pan seal on a 2020 Mercedes Sprinter 2500.
    Hand tools with no specialty tools.
    Make sure at the end when you are letting the van warm up and pump the fluid through you put on the brake and shift through the gears. Let it stay in each gear for a minute or so with the brakes on and the emergency brake on.
    Sprinter 2014-2021
    www.blauparts.com/sprinter-at...

Комментарии • 17

  • @jtheiny
    @jtheiny 11 месяцев назад +2

    After watching entire video, I’m still a fan of filling oil from the top!

  • @ffsteel111
    @ffsteel111 Год назад +2

    Hey guys, great job on a sidenote I just finished doing mine and I would suggest putting 7 L of fluid if you’re just removing the pan and filter and 9 L total if you’re doing the torque converter drain as you did. What I did is filled up with 4 L started the engine and went through the gears a few times then let the transmission come up to temperature finished putting The last of the 9 L total inside of the transmission then remove my fill hose and let whatever transmission fluid was left spill out into my catch basin and then that was my proper fluid fill level but you have to bring the transmission of the operating temperature to make sure that you have the fluid everywhere it needs to be

  • @AdvantureZach
    @AdvantureZach Год назад +1

    Really appreciate you making this sprinter specific video! Helped me a lot!

  • @BOSNAZAUVJEK
    @BOSNAZAUVJEK 11 месяцев назад +1

    Thank you very much. Now I know how to do it myself

  • @2008guelo
    @2008guelo 2 года назад +3

    Thanks for the video nicely done 👍🏽💪

  • @PhillyDee215
    @PhillyDee215 Год назад +1

    👨‍🔧I use to use compressed air to blow the transmission fluid out of the torque converter when I worked on these

  • @miraslauby
    @miraslauby Год назад +1

    Thank you. Great job!

  • @johndeere1951a
    @johndeere1951a Год назад

    Use an impact driver with an extension, with your Allen socket to loosen the TQ drain.
    Been doing this since 1970 servicing Mercedes-Benz.

  • @lilo2469
    @lilo2469 7 месяцев назад

    👍👍👍

  • @2008guelo
    @2008guelo 2 года назад

    At how many miles should I do my transmission fluid change on my 2020 2500 Sprinter?

    • @chrisseanard6240
      @chrisseanard6240  2 года назад +1

      www.waltersmercedesbenzofriverside.com/mercedes-benz-sprinter-van-service-intervals/

  • @damond.edwards3
    @damond.edwards3 Год назад

    Just curious why you didn't drain the torque converter?

  • @blauparts
    @blauparts Год назад +2

    Hey guys, great DIY video! Thanks for the ATF change kit shout-out! If you happen to have a customer account on our website, feel free to send us a private message on our website or via our socials with your account email, and we'd gladly add some reward points to your account as thanks.

    • @svolk2921
      @svolk2921 Год назад

      Guys your brake pads are junk