EASY check, TURBO ACTUATOR failure, WASTEGATE FOR TURBES WITHOUT SOLENOID VALVE

Поделиться
HTML-код
  • Опубликовано: 4 окт 2024
  • Simple, how to check turbo actuator FAILURE. IMPORTANT: this test is for turbos that do not have a solenoid valve and are of fixed geometry with which the Wastegate is closed.
    You can watch this video in Spanish: • Comprobación SENCILLA,...

Комментарии • 13

  • @mikejohnson7768
    @mikejohnson7768 Год назад +9

    I see the thing,you know the thing

  • @josejoseph2424
    @josejoseph2424 Год назад +2

    this confuses me further, but then my question is if there is solenoid, this should move when u exert pressure at the port, if its not the waste gate is said to be in closed position due to diaphragm damage or bad solenoid or vacuum leak.. i feel like i am on right track and main problem with this is more fuel get dumped into exhaust and have black smoke. mine got into a point of dilution with engine oil.

  • @sciglassblower
    @sciglassblower Год назад +1

    You must disconnect the rod from the wastegate lever to evaluate correctly.

    • @julioponce2063
      @julioponce2063 2 месяца назад

      Will I be able to move the Westgate lever if I remove the rod. And also if I add air into the line and then release the air should the lever move back into position?

    • @car-parts2.011
      @car-parts2.011  2 месяца назад +1

      It depends on the system you use, solenoid valve or air pressure.

    • @julioponce2063
      @julioponce2063 2 месяца назад

      @@car-parts2.011 thank you

    • @sciglassblower
      @sciglassblower 2 месяца назад

      @@car-parts2.011 You must check the wastegate without the lever attached to insure it is not stuck and operates fully. You then must check the Actuator solenoid or air pressure actuator etc to insure it is working correctly. You cannot just do what this video says.

  • @TheDZOLE
    @TheDZOLE Год назад +2

    Hello Sir,
    I have one question.
    I test my wastgate but when i put pressure in the line from turbo to wastgete valve open but i saw also there was air escape from the rod that goes in the wastgate. Is that normal or this wastgate is broken ?

  • @mikemiller9911
    @mikemiller9911 Месяц назад

    I'm building to much boost. Studders when you hit full throttle. Any suggestions? 2016 RZR 1000 turbo

  • @philipandrew9915
    @philipandrew9915 7 месяцев назад

    mine failed I tied mine open and I had power so knew it was bad

  • @kjshpeel9908
    @kjshpeel9908 Год назад +3

    my actuator rod separated had to get a new car😭

    • @biggles9604
      @biggles9604 Год назад +7

      what? you can by new actuators, how you got the money to get a whole ass new car, it blew up?

  • @MdShohel-pn8wc
    @MdShohel-pn8wc Год назад

    Md muslim uddin Bangladesh Dhaka good vi