Hurst Billet/Plus Short Shifter - Installation - Phastek
HTML-код
- Опубликовано: 3 окт 2024
- Grab those gears! Shorten the throw in your 2016-2019 Camaro SS or ZL1 by up to 40% with the Hurst Short Shifter. Watch as we show you how to install the shifter in your Camaro.
This shifter comes with the classic cue ball style shift knob with billet aluminum to give an old-school muscle car look. The Camaro SS is the perfect backdrop for this performance-pounding shifter. You can expect a 40% reduction in shifter throw while using the Hurst Shifter.
Shop This Hurst Short Shifter: www.phastekper...
Part Number: 3916031
Subscribe at - / phastekperformance
Instagram: / phastekperformance
Facebook: / phastek
Twitter: / phastek
Thanks for taking the time to make this video! Much appreciated!
Just did this install. I have big hands so it made it hard to reach beside the trans with a tool to push the spring clips in to remove the pins that hold the housing to the trans. I had someone inside reach through from the inside with a long flathed screwdriver as i pulled the pins out with one hand from undetneath. Hope this helps anyone having trouble. I wished i would have made this mod when i first got my car.
Great tutorial video, awesome job👍🏻
Thank you!
Just FYI, the roll pin in the shift tower can come out and bend or break. I put a piece of safety wire through the middle of it to hold it in position.
So all that and we dont even get to see how short the throw is
I just had mine installed. Love it but I’m not sure if the amount of play it has while shifting gears in intentional. There is no video of others spying how the shifter moves after install so I don’t know.
crazy part about all these videos is not one show how to connect the gear selector to the transmission, interesting
Is there a way to use the billet hurst upper shifter stick?
yes u can buy it as a kit
how long did this take?
A job like this can take about 4-6 hours depending on your skill set. Also a lift kinda makes things a bit easier.
Phastek Performance random question not related to this but my shifter is loose. what should I do? how much would a replacement cost?
@@Slowbhen With the shifter being loose, it just depends on why it is that way. There could be a few different things going on, or it could just be worn out.
As for a replacement, it just depends on which route you go. Shifters can range from $250 to $400 depending on the model fitment, then you will have the labor cost on top of that from the shop that installs the kit.
Would this be the same installation for the V6/2.0T?
Installation will be very similar on the V6. The 2.0 we are not 100% for sure on.
@@PhastekPerformance 2.0 and V6 share the same manual transmission. Slightly different than the SS.
Will the stock shift knob thread on this Hurst short shifter?
This kit will not accept the factory shift knob but this link below will show you the kit that will work with the factory knob.
www.phastekperformance.com/Hurst-Billet-Plus-Shifter-w-o-Knob-p/hurst-3916047.htm
@@PhastekPerformance Awesome! Thanks for the help!
Not a problem! Anytime!
@@PhastekPerformance is there any way to get just the oem adapter part of the shifter assembly?
Does this shift any different than the gm short throw shifter?
Yes, this shifter will provide a much shorter throw when compared to the GM version.
@@PhastekPerformance does ot void warranty??
@@johnb3231 replacing the shifter could void some part of your warranty, we would suggest double checking with your service provider to see what they would say.
Droppin the tranny for one pin, and they say German cars are a PITA.
Nazi cars suck
Right?!