Thanks man, seriously made it look super easy. Will i get shocked connecting the positive and negative wires ? Which should i do first so I don’t get shocked
nice install....a good question is...why are we using a relay with a 30 or 40 amp fuse? these lights are only drawing 4 amps for the 2 of them together!
Thank you! You're more than welcome & glad you do the same for your service van now. Comes in handy but these are emergency lights. Thanks for watching & subscribe for weekly uploads 😎
Fitted some of these on my astra h , i cut the grill so the light fit flush. I just tapped power from 5amp fuse in relay box. The lights are really bright its crazy
Hii nice video man. How do we wire them up with factory fog light switch. I have a fog light switch on my center console on my truck and i want to replace my factory fogs with these. Can you tell me how to wire them up with the factory switch and not with the one coming with the kit. Thankyou
I did. That was a temporary connection but they sell a part for this exact setup. Its basically a fuse with a wire sticking out so it's the same concept but "safer". I'll shoot you a link later today🙂
Ain't you worried about all the rocks and shit from other cars hitting the light's in their current position? Always try to mount my light's high on vehicle's.
good work bro..you have made a very good explanation and very easy to understand..👍💯 thank you very much, now I have managed to install a light bar on my vehicle on the encouragement of your video..👌😃 go on bro..you are great!👏👏 Greetings from the state of Sabah🙋🤝
Hi Man, Good video. I have questions tho. I am going to use a separate car battery for this same led lights (480 w) . I'm not using my car battery. (Which is for the car's electricity),therefore how can I connect the led switch, red wire Acc to?, Can I connect the red wire back to my battery positive? Need your advice bro Thankyou
I have these lights. They are NOT 240 watts each. That is purely false advertising. The stated wattage is the estimated incandescent output equivalent. The wattage draw from these lights is very nominal. For example, the LED equivalent for a 100 watt incandescent for your home only draws 13 watts.
i think next time get the amber yellow fog lights before you get a ticket . i have four yellow LED fog lights 75 watts on my jeep and never have a problem with the police
I like how badly built american cars are 😂 I'm going to try though, I could only find one video that was done on my car but it wasn't a great video but this video was good and it's quite similar, I just have to make a few changes Thank you
![Megan Thee Stallion - Roc Steady (feat. Flo Milli) [Official Video]](http://i.ytimg.com/vi/HozPPyqW0dY/mqdefault.jpg)
thank you for uploading your video. i like the simplicity of your installation. now i feel confident on doing it myself. thanks bud!
You're very welcome! Thank you for watching! Glad this video helped :) Made my day
Literally just bought some lights because of your vid. Kudos
just got the same wiring harness here in Australia , thank's for making this vid, as i'm useless with wiring.
Awesome👍 Thank you for your feedback, it is greatly appreciated. Glad you found this video helpful🙂 Sending blessings your way from NYC!
Thanks man, seriously made it look super easy. Will i get shocked connecting the positive and negative wires ? Which should i do first so I don’t get shocked
Thank you for your video. Have to say. Made it a much easier indecision in buying as watching helped answer all my questions
Thank you for your comment & watching! Glad you found this video helpful 🙃
They are nice and bright are all 6inc light that bright? I need some for my goldwing. Can you tell me where you got them.thanks
nice install....a good question is...why are we using a relay with a 30 or 40 amp fuse? these lights are only drawing 4 amps for the 2 of them together!
Nice video 📹 thanks for showing me how to hook my own lights up to my roadside service van
Thank you! You're more than welcome & glad you do the same for your service van now. Comes in handy but these are emergency lights. Thanks for watching & subscribe for weekly uploads 😎
Jumper man Tech 😃
Hi. Great video!. Could I simply splice into existing fog lights, so that the new floods would turn on when I turn on my fog lights?
Yes you can it's exactly what I did
I am now going to give it a shot on my RAM!
Awesome! Glad to hear & thank you for watching 😁🔧⚡
many thanks for this video, big help and you are right the Diagram is USELESS ... more power
Why didnt you wire it up tp the high beam on your car?
Fitted some of these on my astra h , i cut the grill so the light fit flush. I just tapped power from 5amp fuse in relay box. The lights are really bright its crazy
Hii nice video man. How do we wire them up with factory fog light switch. I have a fog light switch on my center console on my truck and i want to replace my factory fogs with these. Can you tell me how to wire them up with the factory switch and not with the one coming with the kit. Thankyou
Wire your dog light switch to 86 on the relay
Nice lights. Where can i buy those?
So never say anything about the white wire?
Those turned out very nice
Thank you! It was a super fun side project and they work great
Great ez to follow video👍. Btw what brand & price for the 7inch led light bar?
Interesting , well explained. Great 👍 Job.
Thank you so much for your feedback! :)
Straight forward and to the point step by step so easy thank you very much.
You're very welcome & thank you!
Very nice video my dude, easy to follow, made it less intimidating for newbies
What are the names of those lights? Thanks.
Not water inside lights after rain?
I got a 360w ledbar what kind of wiring i need 30 A?
Not HVAC but interesting stuff
Glad you enjoyed. Stay tuned for more HVAC & DIY videos!
Hey thanks a lot for this man
You're very welcome & thank you!
No relay used??
did you just strip the power wire and push it in with the fuse?
I did. That was a temporary connection but they sell a part for this exact setup. Its basically a fuse with a wire sticking out so it's the same concept but "safer". I'll shoot you a link later today🙂
Heres the link to the part for correct way to do it :) Thanks again for watching!
amzn.to/3bhMFNk
Ain't you worried about all the rocks and shit from other cars hitting the light's in their current position? Always try to mount my light's high on vehicle's.
My husband learned a lot thanks
Glad to hear that! Thanks for watching & commenting🙏
They look glorious
thank you!
good work bro..you have made a very good explanation and very easy to understand..👍💯
thank you very much, now I have managed to install a light bar on my vehicle on the encouragement of your video..👌😃
go on bro..you are great!👏👏
Greetings from the state of Sabah🙋🤝
where did the white wire go ?
Very thoroughly explained and informative 👌🏽
Oh why thank you miss Yuli Bee😌 More than grateful for your feedback. Stay tuned for more😎
Jumper man Tech you’re geekin out over a fake account bud.
Paint the holes with rust proof paint, unless you’re after that rust look.
Excellent for my needs . Thank you . Looks great 👍
You're very welcome & thank you!
Hi Man,
Good video. I have questions tho.
I am going to use a separate car battery for this same led lights (480 w) . I'm not using my car battery. (Which is for the car's electricity),therefore how can I connect the led switch, red wire Acc to?,
Can I connect the red wire back to my battery positive?
Need your advice bro
Thankyou
Good video!
Thank you so much! Really appreciate your feedback🙂 Sending blessings your way from NYC!
I'm gonna get these thank you!
Great video. You made it vary simple! Thank you.
You're very welcome & thank you!
Nice vid. Gotta put mine in.
Awesome! Thanks for watching
Great instructional video. Thank you brother!
You're very welcome & thank you!
I have these lights. They are NOT 240 watts each. That is purely false advertising. The stated wattage is the estimated incandescent output equivalent. The wattage draw from these lights is very nominal. For example, the LED equivalent for a 100 watt incandescent for your home only draws 13 watts.
What don't you know how to do?
i think next time get the amber yellow fog lights before you get a ticket . i have four yellow LED fog lights 75 watts on my jeep and never have a problem with the police
Good explanation bro
Thank you!
AWESOME! Thanks for sharing!
You're very welcome & thank you!
can you make a vid on unistalling them(
Very useful video thanks !
thank you so much great helpful
You're very welcome & thank you!
Great Video. Thx.
Nice video
Nice Bro..
Thank you!
I like how badly built american cars are 😂
I'm going to try though, I could only find one video that was done on my car but it wasn't a great video but this video was good and it's quite similar, I just have to make a few changes
Thank you
👍👍👍
🤙🤙🤙
The fcc won't let me B
Glove WTF :) Hahahahaha
🤣
👍👍👍
🤙🤙🤙