Damascus Steel - Mosaic Blade
HTML-код
- Опубликовано: 26 мар 2020
- The process of manufacturing a blade by forge welding (Damascus steel). Design - mosaic Damascus steel.
Tea: anchan blue tea (Butterfly Pea Tea)
www.amazon.com/shop/shurap
My site: sites.google.com/site/damasks...
I don’t answer the cost question - email: sites.google.com/site/damasks...
Be tolerant: for obscene language, insults and politics - ban.
My Facebook group
/ 1961092850801182
Pinterest
/ shurap
Channel Support:
/ shurap
Check merch to help support the channel:
teespring.com/stores/shurap
#DamascusSteel 
Наука
Is it weird that I’m just as mesmerized by the tea making as I am of the blacksmithing?
Nope. Its part of the charm's energy
Tatooine has blue milk....
Came here just see what the tea was
He makes it look so good, now I drink exotic tea in my shop when making knives!
Not at all. I’m fascinated with it too.
Sir you are a damascus wizard. That is just what you are. You can take about anything and make it beautiful. This blade is amazing. You are a very talented man and I thank you for showing use your talent. I love your channel. Thank you for entertaining us especially with everything that is going on. May God bless you and your family.
Agree 100%. He is an artist of steel.
How and where can you buy his blades ?
You must use anvil and hammer only.
If you use machine,
you can't feel when holy spirit goes into blade.
Result - bad knaif
Always love that second pressing you do when first setting the welds. Goes from a 4 or 5 inch chunk of steel to a 2 inch just like that!
Unlike the show Forged In Fire where they often attempt to weld at lower temp to save time - hence their horrid inclusions and flakes of steel a lot of times - proper welding temperature is _just_ before melting temperature. The steel is in a near molten state, teetering on the edge of a solid _(think insanely hot, thick jell-o),_ and as such is extremely easy to manipulate. You CAN use a hammer, as opposed to a press, but you risk a slightly glancing, or off center, blow... which completely breaks the initial soft weld. Not only do you then start all over - you may have just made a kg of, basically, scrap.
If he's like me he turns his scrap back into rod/square stock for later projects - but scrap reclamation is tedious. Thus why it's one of the _first_ things I have an apprentice learn to do... I don't want to do it myself, and they learn hammer control, and welding temperature/temperature management, with the practice. It's better to just use a press, if you have one. Forging is far more about technique than power _(steel will mold almost like butter under your hammer at proper temperature - there is not need to strike hard unless you are still trying to shape after it has cooled below proper temp),_ and a press removes many variables that even the best smith cannot avoid at all times when it comes to forge welding.
I know a blacksmiths shop is loud, smokey, dangerous, and dirty. Yet watching you work is so relaxing and your projects always look so clean. I keep thinking I want a handforged Damascus knife. I'm a poor old man been forced into early retirement by cancer so it's just a wish.
@Brian Miller
I don't imagine that I'd be able to afford one either, but if I win the lottery I'll get you one too.
I'm watching your skills since 4 years, and I'm every time impressed.
Best knives!!!!
Yo go check out " alec Steele " hes great too
@@zanderolson491 he talks too much
@@urneighbourhoodchomie5339 ik btw I rarely watch RUclips these days
@@zanderolson491 😁👍
I am also watching Alec since he was in his little shop, he is very skilled for his age.
Глаза отдохнули: мерный шум станков, человек, занятый делом, соразмерность клинка, красота линий травлёной стали - поэма, млин. На фоне происходящей истерии лучшее видео для отдыха. 👍🤩
++ хороший коментарий
Ok, that was the most beautiful knife blade I've ever seen.
Всегда одинаковый (ну почти) процесс, но всегда другой по красоте и оригинальности результат! Самый душевный канал о ковке клинков и не только. Спасибо Мастеру!
Wow what a masterpiece creation Dimitri. Always amazed at everything you make.
Just amazing. Seriously a work of art. My inspiration to want to learn comes from your work Dmitry. Please continue to show new ideas.
This guy is the best secret on RUclips, how he doesn't have millions of subscribers is beyond me
He makes the Damascus dance inside the steel forever. Such desirable artistic knives: someday for me I dream.
Inspiring your blades look so unreal I hope one day I learn how to make something that looks half as good as your WOW and thanks for sharing
4:33 What a Master piece
I appreciate all your hard work and teaching all of us along the way!
I’ve been a welder for 30+years and it is still just as fascinating as the very first time. There is something satisfying and relaxing the way you move the metal. I try to put as much pride as you do in my work. Maybe one day I’ll be on your level? 🙏maybe. Beautiful work sir simply amazing
These are absolutely stunning blades, Dmitry! Great video!
Stunning as always Dmitry - I'd love to own one of your pieces one day.
I'd consider it a privilege.
Beautiful.
Ian Macfarlane you can buy them on his website
@John Matrix In the description above.
Just buy one, as the others have suggested?
He's got links all over his channel, or you could just Google "Shurap", worst case scenario.
@@BillyN31 says he can only sell in Ukraine
BRIAN Gabriel no. He ships
Кофе утром и видео от мастера. Priceless. :) Спасибо!
This is my favorite design I've seen you make so far. It is so intricate and complex!
You make the coolest looking tea and knifes !
I'm curious what kind of tea that was. Don't think I've ever seen *blue* tea before o.o
@@ProfessorYana I'm pretty sure it's Butterfly Pea Flower, which imo needs something added to it for taste because it's kind of plain. Real cool looking stuff though.
T42321
@@ProfessorYana anchan blue tea
И как всегда,лайк мастеру перед просмотром)
Очень красиво! Вообще все Ваши работы просто произведения искусства! А наблюдать за самим процессом, Это отдельный кайф!
Wow, that is just a crazy cool pattern and I love it!
Me: Ah, that's hot.
Shurap: Wipes scale with his hand
In some videos he wipes it off the hot steel and every time I just think: that is a hefty pair right there
Are those black flaky stuff impurities from the metal?
@@ateuslol4376 not necessarily
its called forge scale and is just a byproduct of the forging process caused by heating it up and oxidation occurring
He is one bad Dude! Awesome Work.
I did that once. With gloves on. It still burnt.
Beautiful work, dude. Really amazing how beautiful it turned out! 😃
Stay safe with your family! 🖖😊
То что вы творите в своей кузнице это шедевр👍🏻 Это без ценно что получается в конечном итоге. Мои аплодисменты 👏. Здоровья вам🙏
You make Smith look better than goldsmith .. creativity has no boundaries.. genius work
ШЕДЕВР) ЛАЙК!!!
хотелось бы увидеть твои клинки уже с рукоятками и ножнами , есть же ведь такие же мастера и в этих направлениях
Я тоже почти только с рукоятками занимаюсь, но к сожалению он за рубежом не отправит клинки. Хотелось бы каким-то образом достать...
Да ну нафиг, такую красоту невозможно сделать руками! )) И как после всего этим ножом можно строгать какую-то палку или резать мясо? Нет ребятки - только любоваться. ))
у меня бы тоже рука не поднялась
Очень хорошо резать и строгать! Идёт как по маслу.
Есть конечно один минус. Нельзя ничего кислого резать и нужно сразу мыть и вытирать насухо.
Но это только добавляет новые хорошие привычки.
Ну и точилка хорошая нужна. Иначе кайфа хватит ненадолго.
Просто кузнечное дело - особое искусство, понятное лишь избранным и ценится только ими... и не факт, что режущие свойства столь же хороши, сколь и мозаичные!!!
What a beautiful final blade, thank you for sharing your process with us.
Огромное уважение Мастеру!!! Красивая работа и красивый результат!!!
EET WIL KEEL !!
- Doug
これでも凄いことだが昔は機械じゃなくて人でって考えると途方もない作業だな。
そこに技術持って考えると流石職人ですね。
Thank you for entertaining us all! Amazing work!
Awesome. I love watching the build come together. Seeing the patterns and the method you use to make these beautiful knives.
This is relaxing to watch 👌🔥
His automatic hammer sounds like a machinegun and I love it.
American i assume?
American spotted.
One of the most beautiful Damascus patterns I've never seen
I love how you manage to make such a complex and breathtaking Damascus process look so completely run-of-the-mill.
Like "yeah but have you seen the tea. . ." 🤣👍
This blade was made with the finest tea leaves
Those were not leaves but rose petals. If you have a rose bush you can make the same kind of tea yourself, just take the petals from one flower and put them in hot water for 5 minutes and strain into a mug for a tea fit for royalty.
@@JETWTF that's ain't rose's.. the flower name is blue butterfly pea.. dry it first with sundry.. and you good to go..
anchan blue tea
@@shurap
Thank you, I've been curious to the tea you drink for ages!
I was wondering what you drank there..I literally thought you were going to use it on the knife itself for a second there lol. Like dunk the blade in the blue stuff. But nope, you drank it apparently. Thanks!
Что тут скажешь??? Профессионал))))
Хорошая твердость! По звуку и искрам понятна. Сносу ему не будет. Браво Дмитрий. А за рисунок отдельное спасибо. Искусство!
Мастер без преувеличения! Спасибо за ваши видео, очень интересно и познавательно. Лайк.
*Видео ЗАВОРАЖИВАЕТ !!!*
Спасибо тебе за ролик🙏🏻, хоть что-то радует в это трудное время 👍🏻👍🏻👍🏻
Всегда приятно смотреть на работу мастера, красивые клиники.
The vibrancy in his teas really blow me away 🥂
Am I the only one that thinks using different colors of playdoh or putty would be a good way for students and masters to help design patterns easily?
That is a good idea! A bit of a waste of Play-Doh, unfortunately.
actually, we've done this often, also not just for damascus but big forgings, to get an idea of the grainflow.
Суровый кузнец тосол пьёт 😉
Причем оригинал, на хонду
чай тайский синий анчан
@@user-nh2ni6cr7w спасибо за название
🤣🤣🤣🤣🤣🤣👍
Нитхинол
Beautiful! Your work belongs in a museum.
Outstanding! Amazing as always. Thank you for sharing.
Дай тобі Бог файного здоров'я,майстер з золотими руками
О, новое ведро!)))
Ага))
Best one yet, and blue tea! Thanks for the video
This is one of my favorite patterns that I’ve seen. Very cool.
Да, что бы такую красоту делать, нужно только синий чай пить!
Тосол
Здравствуйте, Дмитрий! Смотрю вас достаточно давно, а вот пишу впервые. Ваша работа просто завораживает, вроде процесс ковки один и тот же, но все равно смотрится на одном дыхании. Вы Мастер!
Успехов вам, здоровья, и конечно же удачи по жизни!
PS. Если можно, то когда завариваете чай, пишите в уголке рецепт заварки.
И ещё. Сколько реального времени заняло изготовление этих клинков? Спасибо.
@@lexusovod5005 синий чай анчан
@@shurap zen.yandex.ru/media/id/5e3a4ea9e4c8117013164b7e/5e4be687a89e6c018bc927be?from=feed&A%2F%2Fzen.yandex.com&rid=3695340001.434.1586103794824.77210 Ваше?
@@shurap здравия вам, вы можете подсказать марку стали торсиона с коляски мотоцикл иж юпитер???
@@shurap такой клинок сколько будет стоить заказать? email readme03.89@mail.ru
Спасибо
Это сушеные цветы клитории. Название веселенькое, зато цвет - чисто синий. ОЧЕНЬ редко продается в чайных магазинчиках. Заваривал как чай и настаивал на них водку. Семь бутонов на 0,5 л и получается напиток небесно-синего цвета.
Once again , beautiful . Love watching your blades take shape . 👍
That dancing line is incredible. Amazing work!
I've been watching for some time, and I really appreciate the tips on your flux mix materials. Every time I watch, you've done something new with your work. Especially liked the dragon knife. This one is REALLY complex, and beautiful! Keep doing what you do, you amaze us all!
One big question: why do you seem to do an internal tang so much, instead of a full tang?
I like it more
Could you share the mixture you use for flux? I don't recall what it is.
@@dansworkshop1972 I sprinkle flux (90% borax + 5% quartz sand + 5% charcoal powder) this is necessary for forging (forge) welding. The flux is alloyed with scale - the formed substance is sufficiently fluid and is easily displaced by deformation. In addition, the flux protects against oxygen and charcoal, carburizes the surface layer of metal - which lowers the welding temperature (if in brief).
Is there any way to buy one of your blades ? I live in united States. Arkansas specifically .
Never realized the amount of material lost for something like this
Not lost you could always use those pieces to make another blade
John Matrix what???
@John Matrix without question this is by far the most racist video on the whole entire internet.
Que obra de arte! Parabéns.
영상을 볼때마다 신기하고 멋집니다
Потрясающая работа! А что за чай такой интересный вы заваривали? Успехов вам! 👍💪👌
анчан синий чай
shurap благодарю за ответ! Обязательно попробую.)
Я, честно говоря, сначала подумал, что это какая-то кислота для травления клинка.😂 Работа - супер!👍 Смотришь как на волшебство какое-то!👏👏👏
I love watching your video's just curious what is the blue tea you made
That was quite obviously Romulan Ale.
Rose tea. Well it was blue so could have been a different flower because there are no blue roses.
anchan blue tea
Absolutely outstanding work, as always.
You are the Damascus Magician! Those blades are unbelievably beautiful!
I'm so early the blade is still warm 😃😃
Absolutely beautiful knifes that you make, I need 1 in my life! Do you sell them?
Yes, I need one of them too in my life! ☺️👍
I don’t believe he sells them, where he is located in Ukraine, from what I’ve researched he has issues with the mail/post. Trust me, I’ve been trying to get my hands on one of his blades. If you find a way, please let me know.
I guarantee you, it won't be cheap. I'd buy one, but I need a car right now..
He does. You can message him in mail or order on his website.
So glad to see you didn't cut out the shape like some smiths do.. you sir are a true modern blacksmith
очередной шедевр!!!!!!!!!!
what do you use for your tea's to get the different colors
anchan blue tea
Здравствуйте Дмитрий - отличная работа !!! А что вы завариваете в чайнике с таким приятным цветом ?
Розу
анчан синий чай
Спасибо большое, пойду куплю
Your videos are very satisfying. Your work is very admirable. I love that you don’t ruin the video blabbing. Straight to business, let the work speak for itself.
Beautiful pattern, thank you.
Amazing workmanship we have come to expect from you.
Great craftsmanship and beauty. Hope you enjoyed the tea.. well deserved.👌
All that forge welding wore me out! Then we had blue tea and I was ready to carry on! Amazing. As always.
Сначала офигел от клинка, а потом ещё раз от того, что увидел в конце что Вы из моего города. Да еще и друг у меня тоже Дима Шевченко. Очень много совпадений))
Wow!! That looks amazing! Very beautiful!
That's just ridiculously amazing.
All of his videos and blades are great, but this one definitely popped out as my favorite for both
Честно гововоря, завидую черной завистью. Я из тех людей, кому бог вставил руки обратной стороной. Спасибо!
Your work is absolutely fantastic. Please make more!
지금까지 본 중에 제일 예쁜 무늬... 찬사를 드립니다. 더 많은 단계를 했지만 더 예쁜 칼이 되었네요..
Новый заварник？ Как всегда на высоте. Берегите себя, Дмитрий, пожалуйста. В Сумах есть заболевшие коронавирусом.
Solche fantastischen Stücke entstehen, wenn ein Meister nicht nur weiß wie es geht, sondern diese Kunst auch in Perfektion beherrscht!
Sagenhaft! 👍🏻👍🏻👍🏻👋🏻
Came here for the blade; pleasantly surprised by the bleu tea... All around a worthwhile effort!
Watching him work is so relaxing. If were to work with metal I would only hope and pray to be this talented.
Какие же красавцы получились.Загляденье просто👍👍👍
Как всегда на этом канале, талант + мастерство + полёт фантазии мастера = произведение искусства!!! Как всегда великолепно!!!
Simply Amazing!!! You are so good on this 👏👏👏👏👏
ЖОВАНЫЙ КРОТ, КАКАЯ ЖЕ КРАСОТА!!!!!!!!!!!!!!!!!!!!!!!!!!! Мастеру +1000 в карму за удовольствие от просмотра видео создания данного шедевра.
Simply beautiful, mesmerising to watch
Just like everything in life, all in the preparation, stunning result, full set of skills on show here 👍👍👍
Mate that one is gorgeous. A true craftsman.
Wish I could buy one
That is a beautiful pattern. A whole lot of work but really worth it in the end. Awesome!! You are a true craftsman.
My mind boggles at your blade craft art and amazing tea blends!! : 0
Breath taking beauty. Thank you. 👌