+Nipindra Gurung water evaporates under pressure, that can be stacked on a smaller surface. meaning that you won't get pressure. thereby, i assume that if there would be air in the system it will make things corrose because of the combination of water and air.
I used to daily an 86 Fiero GT with a clutch line leak, once when I was out of town, the entire clutch line fluid drained and had been draining while I was driving so the reservoir was completely empty. Being nowhere near any shops, I used water from my water bottle to fill the reservoir and lines, bled the lines some and ran on that water for a good month before remembering I put water in there XD Bled the lines again, replaced the water with brake/clutch fluid, everything worked fine! However, there is likely some corrosion from the air/water mixture but not enough to cause any new issues.
sajjad khan Yes.Thank you, Please SUBSCRIBE to us for more videos. We have a face book page just search for TechTrixInfo in face book - TechTrixInfo.com
And one more important thing is to bleed the wheel fartherest from the master cylinder first...as in right rear, then left rear, then front left, then front right..
NathEn DrakE Just concentrate and understand the concept. We are Indians and we do have a little accent problem. He knows the concept well and is passing the information to us.
Everybody including you has an accent while speaking any language and the whole world of 7 billion people don't have to speak English with your accent because you seem to think its king.
Nice explain sir. thank you.
thanks its a good video to understand mechanism of break
Nicely explained and in a easy way too
Sayantan Banik Thank you , please subscribe to us for more videos n keep connected with us on Facebook just search for Techtrixinfo
Silly question. Can you tell me what machines or vehicles this system works on ? Thanks !
Car's,Bikes and may more
very nice can you tell me how you made this animation video it will be helpful for me to start my youtube educational channel
It’s made with paint from microsoft, drawing different frames and capturing each frame with screen recording
Plz explain brake bleeding sequence importance.
Nice presentation.
Great educational information thank you.
Nicely done 👍🏻 thanks alot
please upload a video about how force applied to pedal flows upto caliper through master cylinder
ThaNks for such useful videos
Well done sir!
Honestly his voice made me pay more attention
question...what would happen if one uses water instead of oil in this system?
+Nipindra Gurung water evaporates under pressure, that can be stacked on a smaller surface. meaning that you won't get pressure. thereby, i assume that if there would be air in the system it will make things corrose because of the combination of water and air.
make sense...thanks for the reply
boiling point decreases as well
The water would freeze in the winter as well.
I used to daily an 86 Fiero GT with a clutch line leak, once when I was out of town, the entire clutch line fluid drained and had been draining while I was driving so the reservoir was completely empty. Being nowhere near any shops, I used water from my water bottle to fill the reservoir and lines, bled the lines some and ran on that water for a good month before remembering I put water in there XD
Bled the lines again, replaced the water with brake/clutch fluid, everything worked fine! However, there is likely some corrosion from the air/water mixture but not enough to cause any new issues.
Please watch the full video and drop your comment.
its bull shit
TechTrixInfo.com
Good job. Prem has a problem ignore him.
Nice explanation and intro is awsome how you made it
Which is more elastic, rubber or steel?pls i want this question answer
Steel
Steel
was in class watched this knew more than teacher
No you didn't, shut up.
superb
sir, is the master cylinder connected with the brake fluid reservoir ??
sajjad khan Yes.Thank you, Please SUBSCRIBE to us for more videos. We have a face book
page just search for TechTrixInfo in face book - TechTrixInfo.com
I came to know that So easy this concept after seeing this vedio
Pakandi
Good information
Selvaraj C P Thank you, Please SUBSCRIBE to us for more videos. We have a face book
page just search for TechTrixInfo in face book - TechTrixInfo.com
very nice vid man!
+dobbi luther
We are honored by that comment.
For more info you can email us at techtrixinfo@gmail.com or whats app at +919744615655
TechTrixInfo.com
which fluid is being used ?
Thanks for update.
Hello sir.....how can u make a intro of your channel
the intro logo looks similar to a business here known as TruxxTechz in Harlingen.
And one more important thing is to bleed the wheel fartherest from the master cylinder first...as in right rear, then left rear, then front left, then front right..
good!
what happens if you accidentally pour power steel in brake fluid
This guy is the brother of "pawri ho rahi Hain"😂
Kollam ..
Sheriya
master sulinder
Drew M lol
Tha BRAIK pishtons
Workings principle not explaining
you explai the mechanism well but plz concentrate on u r pronunciation mate... don't mind.....
NathEn DrakE Just concentrate and understand the concept. We are Indians and we do have a little accent problem. He knows the concept well and is passing the information to us.
Everybody including you has an accent while speaking any language and the whole world of 7 billion people don't have to speak English with your accent because you seem to think its king.
+Karansingh Thakur I did understand mate
Shit animation but alright explanation
Sanu tan pata e ni c
if you decide to make more videos please contact me to do the voice over because your voice pretty much ruins the video. lmao
ya absolutely correct its good that u will take the position of voice recording because i think your voice is like justin bieber ... :p
vairy gord bleedin walbe
Your voice is so not-so-heard-before type....
tha nipel
Pagan salaa
fuddu
Very very not explaining not satisfaction
Good information