Become a Tuning Pro: hpcdmy.co/dr4a Support the channel by shopping through this link: amzn.to/3RIqU0u 100 cars that changed the world: amzn.to/3DGXDf6 Stem engine model: amzn.to/3Y5iZLv Motivation: ruclips.net/channel/UCt3YSIPcvJsYbwGCDLNiIKA 1-2-3 count with Car parts: amzn.to/3jxP7Z6 Patreon: www.patreon.com/d4a
14:45 time is a false measurement here. It would be better to operate with a angle*momentum sum across the combustion stage. Here the difference in top dead points is kicking in: making the momentum more linear, normalizing piston speed, increasing fuel burning duration thus allowing fuel to burn completely.
That is interesting and makes sense as it's making more out of what it's given eg the time, so I'm thinking with different compression stroke,less time, would it be better for boosted engines be that supercharged or turbo
I love that you made this video. This is such a great lesson on engineering. Sometimes what may initially seem weird or counterintuitive identifies an aspect that can lead to creative gains.
I wonder if alternately offsetting the pitons would help the balance. You might need to have a different firing order and inlet and exhaust valves also on alternating sides. I am too tired to get my head around it at the moment, but I might think about it when a bit fresher.Great explanation, thanks.
Your calm, gentle tone without any background music or sudden, "startling" audio tracks makes this channel leagues ahead of others. No distractions. Just pure education. Thank you! ❤❤❤❤
Nah, I think he should keep showing cascading stacks of hundred-dollar bills, and show fake film projector scratches, as though it is old footage, and he should add a fake A.I. "narrator" who can't pronounce words, names, or numbers right. And some crappy music. :) BTW I never knew this about engines, even though I run engines all the time and know a few good mechanics. Very interesting stuff!
In the trucking world the offset cylinder (commonly referred to as downsped engine) does wonders for the engine performance. Slower piston speed means more torque at lower rpms while increasing fuel efficiency. It also increases exhaust temperatures which helps with all the emissions components. Pretty amazing to move up to 80000lbs at 950rpms at 65mph and getting 10-12mpg.
Is this guy talking about Chrysler's 1959 slant 6? For all you "this changes everything" modern day idealists... please keep in mind quad copter drones were invented in the 1920's, and were among the first successful heavier-than-air flight "VTOL" vehicles preceding helicopters, and electric cars were around from the very begining of personal trasportation. With the first example of an electric car in 1830, but by 1900 were 38% of Americas automobile market, with steam taking 40%, gasoline 22%, and diesel just recently invented in 1893 as a means to use cheaper low grade fuels. Diesel is only more expensive because the government puts a TAX on diesel fuel, and now also requires DEF as well.... I'm still waiting for someone to re-introduce steam vehicles, so this guy can make a video about how THIS CHANGES EVERYTHING.
@@Ed-ty1kr Starting in 2007 here in the USA the feds mandated "ultralw sulphur" diesel fuel, among other emissions reduction devices and systems. (Think DEF, DPF, along with some other ideas integrated into these new systems). It's unfortunate how technology has improved dramatically in the diesel industry just to be negated by the over the top emissions reduction systems mandated by the fed. In 2007 they essentially raised the price of diesel per unit, gallon here in the states, which of course became a permanent raise in cost, supposedly to offset the cost in the manufacturing and distribution of the required ultra low sulphur fuel...all the while achieving this new standard of reduced sulphur by simply taking said substance out of the "mix"...in other words charging us significantly more per unit of fuel by the reduction or even elimination of a key component which in the past was used to lubricate the moving parts of the fuel system itself. Well not just moving parts but also critical yet stationary parts like the body itself of a diesel fuel injector. This whole concept of what went down here in America around 2007 is so frustrating to me. As a life long mechanic with experience in internal combustion gasoline, compression ignition diesel, 2 and 4 stroke gas, and even electrical (EV) powered vehicles found in the forklift and equipment fields. In addition to the wrenching experience and understanding I also worked a relatively small window of time in the refinery business around this time of 2007. Much work was needed for the refineries to be "ready" to make, distribute and sell this new "ultra low sulphur" fuel and therefore refineries everywhere went under humongous updating projects. Many bodies and brains were needed for this task. I hired in at the Marathon refinery as a contractor at their elaborate plant here in Detroit, basically i-75 and Fort st./Schaeffer Rd, near outer drive amd Dix Ave...anyone from around the knows the plant and it's location. I found that job very interesting, despite being temporary I still spent about 2 years on site learning something new every day about the refinery process, which honestly, was rather rewarding. In summary, it's almost as if some kind of globalist cabal who secretly run things from behind closed doors and it's almost as if these people didn't want more efficient diesel engines which essentially move and power this entire world we live in, where every aspect of our daily lives are affected by a diesel powered something somewhere along the way. All these EPA backed emissions reduction acts and mandates have crippled the Diesel engine industry to where people actually believe EV's could save the entire world right now...which they cannot. Ever. Efficiently. Replace ice and diesel. In a dream last night I actually imagined the newest most bestest thing ever...a vehicle powered by... Coal! Then I woke up and had to pee.
@@williamstamper442 EPA and DOT measures became overreaching sometime around 1969, with 5mph bumpers that by the early 1970 made American muscle cars sinfully ugly, with huge protruding bumpers, and emission systems that dropped 350 to 426 horsepower cars down to slow, heavy, and gutless 150 hp gas guzzlers. But this actually goes back to 1913 and Woodrow Wilsons Jackyl Island treason, that the British Royalty literally paraded him through London for. Henry Ford was quoted as saying its just as well the American people are ignorant to finance, cause if they knew, there would be a revolution by morning. Not an exact quote but something to thar effect. Which got really bad around 1964, post Kennedys famous secret societies and proceedings speech, which was just weeks prior to his assasination. Funny thing you mention Globalists cause it was with George H.W. Bush involvment, a known and admitted Globalist within the CIA, who later became Regans VP as Regans alzheimer's set in. Then became President giving the world his famous New World Order speech, with creepy undertones saying things like "and when we are successful, and we will be". Followed by a short Clinton break, with MK Ultra and Tuskegee human experimentation on American citizens admittal and lame appology, and then by his son and fellow Bonesman" George W. Bush Jr. There is a documentary you can still watch on Internet Archive made in 1982 called The Killing of America, that although is aimed at gun control, still documents the drastic decline of American society into violence, mass redrum and general crime up to that point in 1982. Directly links Kennedys assasination with the crime rate, violence, and general depravity as if some great evil had decended upon the land. Which only got worse thanks to the CIAs Contra Cocaine "conspiracy" and introduction of crack cocaine onto Americas streets, only now trumped by fentanyl. Which... started with LSD's introduction, the first poison unleashed on the nation. And who created that? Look it up, it was nothing new, it was as if it was deliberately released onto the soft heads of Americas youth, by design, on a large scale, and almost immidiately in the late 60s post assasination like clockwork. So now its fentanyl but its the same game, new millenium. Look into a book called The Psychopath Machine, written by an MK Ultra survivor, who claims MK Ultra was not to create psychopaths, but to identify and install psychopathy in prominent positions. By identifying through tests and examinations all existing sociopathic personalities, so as to find candidates for the military industrial complex bureaucracy, top medical professionals and doctors, university psychologysts, federal judges, top law enforcement professionals, and the now famous Wall Street American Psycho business personelle. Everyone thinks MK Ultra was to create psychos, but why create something if you can recruit existing? Anyhow... As far as Globalism the world we see today is a direct product of their actions. Just look up the definition of GLOBALISM and see if that fits the world we live in. Look up World Economic Forum videos and whitepapers, they dont hide much, for they assume we are all just ignoranr commoners. I still recall Ross Perots "Great Sucking Sound" speech he gave with Geroge Bush Sr. on his right, and Bill Clinton on his left, as he told the nation we will see our jobs sent to Mexico and overseas if we elect either one of those two candidates. Thar was 1992, and Boy was he right, they literally sent all Americas industry... tooling included.. to Mexico and mostly to China, because the "Chicoms", view communist China as the model for their New World Order or Great Reset. Where they can Build Back Better their tyrannical dystopia where you own nothing, live in 15 minute prison cities, have no privacy whatsoever, and eat a diet of bugs. But only after they tear it all down and bring the western world to its knees, cause you must tear it down to build it back. Looking further down the now well proven and documented rabbit hole we see the same mass migration mentioned in Globalisms definition, in both Europe and the United States, with the 3rd definition for globalism given as : An ideology based on the belief that people, goods and information ought to be able to cross national borders unfettered. So we see our boarders disolved or non-existant, with our military or "defense" spread out to hundreds of bases world wide, and fighting or aiding in just about every conflict anywhere including Ukraine. Which was a military industrial complex and George Soros color revolution construct, designed to fight Putins refusal to play along with NATO's clear rejection of the treaty written up by Gorbachev while the Soviet Union was disolving, not to impose NATO onto Russias doorstep. People dont know about any of that, and how can you blame them they dont work at the United Nations, so they support whatever the media tells them. But it was actually over a treaty that was not upheld by NATO, and the nordstream pipeline that has most of Europe now feezing to death. They did it by first meddling in their already fraudulent elections, playing dirty games with Ukrainian oligarchs who are actually just the corrupt businessmen and gangsters that came out of an empires collapse. They got involved with installing of puppets like Zelensky, possibly even Putin himself for all we know, and subverting their society through color revolutions that are always signified by the famous RAISED FIST. Running criminal bribery based public private partnerships which is basically just a soft modern term for fascism, first coined by Mussolinni the italian dictator during WW2. This tactic then was turned inward onto the American people in 2020, and we ended up with cities burning, and public private partnerships set up during the Bush era that is now no longer just working for the government as contractors, but now controlled the government through public private partnerships. Anyway it is FASCISM, its set up and ran by Globalist wealthy self declared elite stakeholders, and it is just a means to impose a world government tax on the common people ONLY, while they continue to jet set and yacht around the globe in vehicles the DO NOT ACCRUE CARBON CREDITS... Yes you read that correctly, private jets as well as vessels above a certain size do not have to abide by carbon credit global government taxation. They solve nothing, they impose all these measures like forced injections and central bank digital currencies linked to social credit scores... but they serve absolutely nothing except to make them richer and more powerful. It is an ideology of haves and have nots, of serfdome, a cass system, a communist fascist socialist dystopia where your only rites are to depopulate yourself by assisted suicide, with their war on carbon being a war on all of us carbon based life forms. Sorry for typos, and sorry for it being so long, I couod write a book on the globalist tyrannical nightmare society they are building. And yes , they penetrate the cabinets as Klaus Schwab says, and destroy whatever they lay their greedy, grubby, filthy paws on. Period
@@williamstamper442 LOL ... I got a good example of Globalism for you Will... Nevermind these wasteful batteries that lose God knows how much energy being tranfered down sometimes hundreds of miles of power lines, with losses through resistance clearly shown by simply looking at them through a thermal camera.. But can you explain to me how does this Gloablist process make any sense to you? They source cod or chicken or whatever perishable refrigirated commodity here in the United States... only to ship it to China to be sliced up and packaged. Then ship it BACK to the U.S. to be placed in supermarkets. Is that globalism in a nutshell or what?
So many of academic books seem like they are written for people who already understand topic at hand. Your approach is complete opposite of those boring and soul crushing books. Thank you! D4A channel is top tier! Your passion and dedication shows, and it's obvious you have a lot of empathy and understanding for those of us who are at the beginning of our learning journeys.
I love these videos, you have a great ability to take deep dive into a complicated, almost nerdy subtopic, and illustrate it in a lighthearted and engaging manner.
@@jesusfreakpl I'm currently watching a live stream of two astrophycisists debating a scientific paper discussing the nature of a particular, albeit peculiar asteroid; that is full nerdy by my standards
@@jaedanoeugene4004 Don't worry, it was Avi Loeb and Bian Keating, discussing Oumuamua. I like Neil De Grass Tyson, but nearly everything he does these days has his side kick "chuck" who always derail the science to make dumb jokes, or the conversation gets dumbed down to a point where he, as a non scientist can follow it.
I am a automobile teaching professor the degree angle of rotation was explained phenomenaly hats off i will recommend this video to my students and show this video in my coming lectures
People are always surprised how well these videos take complicated topics and explain them clearly step by step. That's what we need to teach kids in school - the way to organise your thoughts in to small chunks, put them in a timeline in a correct order and present them to others. It's reading, writing and critical thinking working together to produce successful communication. That way you accurately express your thoughts, the other person understands them as you meant it and everybody is on the same page. Also, that's how you teach others. Also, it's THE way to erradicate common misunderstandings and arguments people get into simply cause they got each other wrong. All the fights in the comments sections, under news articles, in the public arena, in the media... You need to learn to think like an engineer, in logical steps. Then you can explain a trip to Mars to a 5-year old.
I'm a mechanic with some engineering experience and your videos are amazing for bridging the gap between practical and theoretical knowledge. The way you teach by gradually introducing the mathematical concepts alongside the practical demonstrations make your explanations work. I'm sure someone with no engine experience would struggle, but I think your videos are an excellent resource for people like me who need more theory, or people like engineers who understand the theory but rarely work with the actual application.
Ever heard of David Vizard? He has a channel and is essentially an engine-building legend. He also donates to St. Jude"s. He offset an engine's bores what I'd guess was decades ago.
If you're an engineer, you surely realize the offset engine has a longer rod or longer rod bearing distance from crank center to do this. They are not the same as the centerline rotating engine. This is part of where the "increased intake gas" comes from. That point was completely skipped over, intentionally I suspect.
Many years ago as a student I visualized this idea of an offset crank and wondered if it would develop more torque. Thanks for so thoroughly exploring and explaining this topic. Fascinating.
There are two ways to apply offset. You can either "move" the crankshaft off the centre line of the cylinder or you incline the cylinder slightly. The effect is the same. This has been done for at least 80 years to my certain knowledge. In the 1950's it was normal to rebore an engine after as little as 25,000 miles. This was done with the block in situ. If you didnt allow for the offset when setting up the borer you destroyed the block. Later the cylinder was offset laterally to make maintenance easier. This information is hidden in works maintenance and overhauling manuals.
It's amazing how changing a single parameter (crankshaft offset) produces such complicated knock-on effects for a multitude of other parameters. Thank you for breaking it down and making such a complicated amalgamation of forces understandable!
Hi sir im a big fan of yours i always watch your videos and i realy love it, im a racing mechanic i do upgrades with bigger cc and defferent engine configurations i hope that you recognize me sir
I love your style. The combo of personality, accuracy, detail and pace is perfect. I've been teaching for 27 years and it's is rare to find these properties, all in one presenter. Thank you.
I made it to the end! When I was young I raced bicycles. All of the dynamics you have mentioned are directly related to bicycles. When you are starting at the line no one in they’re right mind would set the peddle at the twelve o clock point. You might even hurt yourself if the peddle can move freely in reverse. Seat position forward and back are important as is seat height. I never thought about why some of the practices we used were helping. Great video!
Great point you have made, about applying some of this science to a common bicycle. As a mechanic, car guy, drag racer and all those dirty things I still love my bicycles too. Now you got my brain smoking overtime as these principles are applied to our pedal powered all capable machines!
I uses to race bmx also Jack pine lodge , in bath mi. 1979 , 1980 ( i think ) I showed up with a hacked up huffy street bike , that i cut the crank and lengthened the pedal stroke , if you werent careful you could stub your tow and twist them backwards , i had it that long , But it worked great , i was out in front most of the time , that area at that time hadnt seen much experimenting like that , but it caught on quick , and i picked up shwinn in east lansing as a sponser , got me a fancy schwinn mongoose , they just came out back then ..
Excellent video! You missed one very important point. The offset cylinder moves the point of maximum combustion pressure closer to the point of maximum mechanical advantage. Also, the same effect is often achieved with an offset piston pin location in the piston design. The lengthened intake stroke duration is very helpful in naturally aspirated engines. Getting air in is much more difficult than getting it out!
Okay, cool. So could a small block Chevy, for example, be improved in power output by forging pistons with a crank pin hole drilled a few thousanths offset? (Obviously keeping it small enough to avoid destructive vibrations) Is this being done, say in the drag cars? Is there an emerging cottage industry? Seems a manufacturer could take advantage of this without an entire redesign. Is the old Rambler 6 in my Jeep good for another 8 hp? I’ll keep it under 10,000 rpm, promise!
I learn so much from your channel. I've built several engines in my lifetime and have worked as a mechanic in the past. Videos like this show me the gap between what I KNOW and what I fully UNDERSTAND. Thank you and please keep the lessons coming.
I had no idea of this technology . Your explanation of this was very clear. I can only imagine the time spent editing this video. Thank you for your time and effort to create this.
The "classic" mechanical name for crankshaft offset from center bore line is "DeSaxe" offset. It has been used for nearly 90 years (off and on) for Two Stroke engines (especially Model Airplane engines), but there were even some stationary steam engines which were "DeSaxe'd". Up until only recently, vibration and harmonics were always a problem. Kawasaki first used it on some of their big bikes in the early 2000's but didn't quite get it right for some time. Now, it's pretty common. Back in the early 1990's my automotive mechanical engineering professor said there was nothing new (un-tried) in internal combustion engines for nearly 60 years... he was right. Many of the first attempts were way ahead of the technology (particularly materials, and understanding the concepts of good combustion chamber design). We take for granted CAD and Fluid Dynamics modelling software and digital ECUs. Back then, they had slide rules, sine and cosine tables. Perhaps the most advanced thing available in the late 1950's was something akin to an oxygen sensor (the size of a tanker desk) in the engineering area... times have changed. Great Video!
@Matthew Helton Reading your comment made me really smile. Back in 1972 when I was doing my final work (diploma) for my degree in Mechanical Engineering (Lucerne, Switzerland) one of my student fellows was given an assignment by the Head of the Engineering Department at SULZER Switzerland (back then famous for ship diesel engines powering big oil tankers and freight ships). The task was a principle study of a variable offset diesel engine and to investigate what advantages and consequences could be expected from such a design. Since I had completed my task a week early and was bored, I suggested to my colleague that I would write a FORTRAN program to calculate the friction losses over the four cycles as a function of the variable offset. The result was a surprise for both my professor and the expert from SULZER. By the way, even then we had something more than just slide rulers and sine and cosine tables, namely an IBM 1130 with 20K main memory and a 5 MB disk. Nowadays, most people are surprised that you even could do anything with it at all.😀 Kind regards Florian Eggenberger
I'm curious how this technology could be applied to stationary steam engines. The steam engines I'm familiar with have a power stroke in each direction because they admit steam to a piston face at both ends of the stroke. Could you point me in the direction of an example I could examine?
@@cdjhyoung Quite a number of high-speed stationary steam engines had single-action cylinders and were used a lot for power generation. The Willans engine and derivatives were widely-used for example, and the Westinghouse High Speed Engine in particular was a single-acting desaxe cylinder steam engine that was commercially produced.
The Toyota 1.5L 1NZ-F(X)E was a relatively early example in the economy car segment. Sounds like a tractor, vibrates noticeably at idle, but returns 50+mpg on a run and makes good usable torque from 2500-6000rpm. I'd say it's a fairly typical example of what you described.
On paper it got good mileage but it has a very narrow torque curve and was coupled to a gear box with very high ratios. Also built like a lawnmower engine making extensive use of pressure die cast parts.
I noticed the 'suped-up' engine mount/damper at 19:25 I thought who would just build the engine and counter the vibration issues during fittment of said engine? Well thanks Henry Rolt, Toyota did! In this day and age I think, given the option, most consumer car buyers would opt for extra mpg over a smoother ride. In fact, if a car returned 125mpg but rattled your fillings out, it would sell like hot-cakes and come witha free gumshield!
For what it's worth, I really enjoy the engine balance videos that you make. You are able to make complicated topics accessible to someone like myself who isn't a mechanical engineer.
I love these videos. I've watched your engine balance videos MANY times. I find all of your videos extremely informative, easy to follow, and easy to understand. You make intimidating and complex topics interesting and easy to learn. Please keep them coming. I have been curious about the V12 recently. Not a lot of good content out there on how these engines work and I have read conflicting information about the bank angle and engine balance. Would love to see a video about how these engines work.
Great, thank you for the fantastic explanation. As you say, it’s all compromise and the engine concept depends what you want in the end. I guess the off-set engine is good for racing, the zero-offset good for keeping your teeth and spine in good condition for longer drives/rides. 😊
Regarding balancing V12s are often inherently balanced through any V angle because they can be arranged as 2 inline 6's merged together, and the inline 6 is intrinsically balanced using the right firing sequence.
My grandfather worked in the early 1900's in Detroit as an automotive engineer perfecting the aluminum piston (Nelson-Bolen steel strut piston) and my father-in-law taught auto repair for decades. Me? I grow plants, but I am fascinated by engines and the human genius that makes them possible. Thank you for your in-depth yet understandable videos!
I'm more impressed with the fact that English is not your first language, and yet you explain the engineering and technical points in your videos better than many native English speakers, and that your content is on point, and illustrated clearly makes it easy for people of *ALL* engine / engineering experience levels to increase their knowledge.
Sir, your presentation is top notch and so easy to follow. I have a pretty good knowledge of automotive technology but was never aware of cylinder offset. Your animations are so valuable in helping to illustrate all the complex geometry that takes place during crankshaft rotation.
In the early 1990's I read a paper on how a longer rod length affects power characteristics and I remember the classroom discussion was along the lines of, "we've been doing this long enough that we're now able to look at smaller details than ever before." Offset engines are a surprisingly simple and subtle change to how it's always been done, but as soon as I saw your first charts, I was able to see some of how it would be an improvement. Very well taught.
Steam engines used offset engines over 100 years ago, and the Volkswagen vr6 and vr5 are off set, but instead of offsetting the crank, they would offset the angle of the cylinder bore.
@@wannabecarguy Yea, you'd only have to that and mill the block top at and angle, fill all oil and coolant passages the angle interferes with in the block, re-drill new ones, custom crank balanced for the rod angle, custom harmonic balancer, run a custom timing chain system or belt, custom header or down pipe to accommodate angle, all for zero HP gains. Cake!! :D
I really didn't have much interest in ICE before coming across your channel, your in depth clear explanations made me appreciate engines a lot more. Watched it all the way through too! I would love a video regarding the R1 or ZX10R engines; however, I would understand if the material on the balancing of these engines would be hard to get.
@@jaredlancaster4137 Perhaps like me, I took ICE for granted. I use them, wasn't really curious about them. I'm interested in electric motors, but for industrial applications, not cars!
You are always able to explain these difficult and tedious concepts in a very clear way, I'm not saying I could engineer an offset engine now but I completely get the concept and complexity involved. I love your channel.
Great videos. When I wrote my books on the Yamaha KT100 two-stroke kart engine, I became fascinated by piston pin offset and rod angle because these have a marked effect on the timing of the ports. As I commented on the prior video on rod/stroke ratio, I believe that piston pin offset, and cylinder offset (those having the same geometric relationships) affect camshaft events. All this prompted me, with a Cosworth engineer friend, to produce a piece of software that calculates stroke/rod ratios, the location of the piston in the bore, the piston location at TDC and BDC, and everything in between.
I thought I was pretty familiar with 4 -stroke reciprocating engines. And many of the subtleties that effect their performance parameters. Torque /HP vs RPM. Subtle changes in intake and exhaust flow vs. RPM resulting in changing Torque/HP curves. Every time I watch your channel, I learn something totally new to me. Thanks.
Impressive. I've read a bit on offset engines, but your explanations are much more complete. Thanks a lot for this. I missed how big the offset can be and when the cons are greather than the pros depending on it.
The offset usually ranges between 4mm to 10mm, too large leads to diminishing gains. But there are engines with as much as 12.5 and as little as 2.5 agaik. Offset in the video is exaggerated to 15mm to make effects more obvious.
@@d4a I'm probably misunderstanding but if the offset decreases the rod angle and therefore the friction on one side of the cylinder wouldn't the increased rod angle while it's on the other side cause increased friction, negating the benefit?
@@dr.brianadams6542 the highest side load is during the combustion stroke. The difference is not small either. Go back to the vid on Miller, Otto and Atkinson cycle engines for another benefits.
I have seen your videos of the 4-V, 4-opposed boxer engines, and found them very interesting allowing me to reduce my ignorance in such subtle differences. I really see the balanced engine as great, maybe I sense that it lends itself to a quick massive application in opposed-cylinder engines or even in boxer, even better. And the coolest thing is that it would never have occurred to me, "advancing the crankshaft", turning it when the piston reaches TDC, is really a new way of extending intake timing, generating "ignition advance" and reducing engine speed. expansion effort after the explosion with a lever arm helping to rotate the crankshaft. The concept that he has so clearly explained to us with his beautiful lecture on the subject of balanced motors is really great. Thanks for your class!!!, Greetings from S.L. Arg.!!!
Seeing this video is a bit of a shock! I proposed this idea to General Motors (I was a Chevy guy then) about 60 years ago! I had built a flat model where I could tilt the "cylinder" to create an offset and crudely measure the change in intake/power strokes to the compression/exhaust strokes. I sent them a letter and some drawings mostly stressing the benefits of increased duration of the intake and power strokes. I had figured out most of what you cover in your video save for the vibration issues. I believed the vibration wouldn't change with a cylinder offset. I think I also missed the different stroke lengths but hey, I was only 15 or so at the time. To my great surprise, GM responded! They said they had tested the idea and it didn't yield any noticeable benefit. Did they just blow me off or had they really tested it? If they did test it, did they change the ignition and valve timing, I'll never know. Great video! 👍
GM in particular, but all the big three have been using offset wrist pin placement for well over the past 50+ years in everyday production. Most of this was to reduce piston slap, thrust wear on piston skirt when cold and in general quiet the engines down. With that said they also had slight increases in torque in mind, across the board at relatively low rpm levels seen in our daily transportation still to this day. "free" torque improvements are an increase in efficiency and we all like the way that sounds. Unfortunately the way the oems have done offset wrist pins in order to quiet down cold starts and such ended up cancelling each other as one bank on a V8 would be offset in favor for small increases in efficiency, but the other bank on a V8 were offset to just take the load off the thrust side of piston skirt with a net negative effect on efficiency. That's what I meant by any gains were cancelled out on the other side of the engine. They still achieved their goal of reduced engine noise however
In the 60s, valve actuation was the rage. Ducati and its desmodromic system, conical valves springs, roller rockers, etc. Bored in high school, I doodled an engine with solenoid operated vales. Lotta good it did me. I also designed a crankless engine with piston position sensors to operate the valves, but there was no way to directly extract power from it.
Your delivery, humour and insight are absolutely perfect. It's not often I laugh out loud watching videos like this and I'm only ashamed it's taken me so long to stumble onto your channel.
Gotta be one of the best engine design channels out there!!! I am always amazed how new videos can cover things that I had no real comprehension of while making it simple and entertaining to watch.
Thank you, professor! I have a horizontally opposed, air-cooled, VW engine that I increased from 1.6 to 2.0l by increasing stroke to 78mm and bore to 90.5mm. The pistons are offset by design and the arrows stamped on the piston head aid in proper installation. I now understand why, even though I took great care in balancing the rotational elements I still get slightly annoying vibrations which I cannot tune away. So, I can stop pulling my hair now.😂 I would also add that I increased the rod length from 5.4" to 5.5". I can't recall now why but probably the compression ratio which is approximately 7.8:1.
Piston offset is something entirely different than offset rods. Piston offset is there since the Ice Age. It' s goal is to slightly increase piston dwell time at top dead centre thus decreasing piston slap (a ringing sound) and decreasing load on the wrist pins and small end of the rod. Same is achieved with offset rods, but that is only one aspect of offset rods.
I opened this video while searching info in the process of designing something very far off the engines but the video was still explaining a lot about what I wanted to know. Thanks! :D
Neat thing about the secondary balance in an offset engine, is you can just ignore the small forces and balance out the larger ones. As well, because they are not uniform in distribution, they are less likely to cause catastrophic issues from resonance.
Used offset pistons in a Ford 289 years ago with 11.6 to 1 compression ration. It was a torque monster, and nearly unbeatable in a 1963 Fairlane Sport Coup. Surprised many a 396 Comero and 440 GTX owners who just could not believe what just blew past them after giving them a head start from a 30 mph roll, only to inquire when catching up afterwards about my healthy "big block". That offset made a huge difference.
Good stuff. I've studied engines both internal and external combustion from some pf the earliest designs all my life. I love how much I learn in minutes that used to takes hours and days reading old design books or observing actual engines broken down, which was exceedingly rare. Thanks for all your efforts.
So many people show there interesse on this channel, and I count myself among them, only because your talent, your ability to make so complicated topics, maybe not uncomplicated, but for sure more digestibile for us ordinary mortals. The fascinating world of motoring is reviled before us, with you helping, so it gets even more fascinating. Thank you for that! 🤓👍🙋
The last part of the video really gets interesting. It's all about the differential equations that governs the system. The small axis shift produces a new interpretation of the engine. These are things that deserves the mathematics explained in exhaustive detail. Tribology is a fascinating discipline that deserves a place here youtube.
It's in the smallest of details where great ideas can form. Knowing what each part does by itself and in relation to its neighbor helps to create an instinctive understanding of the whole system. Some relationships have flexibility while others don't, and your videos explore those relationships.
For 2 stroke engines the offset is towards the exhaust with the cranck that spins in the same direction. This allow for a longer time for the first blowdown to be longer than the second allowing the engine to run slightly higher
probably, the only non-bot comment. thanks for this comment.. I was thinking this would only be beneficial for a 2-stroke engine. The compression stage of a 4-stroke would completely destroy the presenter's efficiency paradigm.
@@derrikarenal3308 Think about how much greater the forces are in the power stroke. After all, that one stroke produces enough energy to get the engine through the other 3 strokes and on top of that produce a huge amount of energy to accelerate the car. So making the geometry better for the power stroke, easily offsets the penalty of making the geometry worse in the compression stroke. (Where the downward & thus sideways forces on the piston are maybe in the order of ten times lower).
Wow, this video is very usefull i wanted to do maximum possible overbore on my honda motorcycle but cylinder studs at the back of cylinder were limiting how large cylinder liner i can put in the engine, thanks to your video i realised i can simply bore out cylinder with offset and put bigger liners in it by offseting them forward.
This offset cylinder idea is the Désaxé design, started I think on steam engines. Early adopters of the Désaxé principle included Henry Ford who would fully implement the Désaxé offset into the Ford Flathead V8 engine throughout the 1930s while adopting greater offsets into the 1940s.
The one thing I noticed about the offset that wasn't mentioned was that the most extreme angle the con-rod makes is greater than that of the non-offset engine. This happens on the compression and exhaust strokes and would cause friction to increase with RPM, so I had been under the impression that offset engines generally produce more low end torque and have better efficiency, but the sacrifice is how high the engine can rev before it starts to lose power.
However, the compression and exhaust strokes are relatively low-stress periods in which the force on the piston is small, compared to the power stroke which has a very high force on the piston. Thus it gains more to reduce the friction coefficient on the power stroke than it loses to increase it on the others.
Yes, and no... at low RPM the friction from the power stroke goes way beyond the friction generated by inertial forces. But as the engine RPM rises the inertial-induced friction increases while the power-induced friction stays relatively the same.
@saskprotogencyus2788 exhaust is no problem as the force on the piston is relativ small. Compression is more annoying. What is a problem is bottom dead center. Once the crankshaft get's past 180° and starts moving up, but the piston still moves to his buttom dead center the pressure on the piston works against the engine. You can compensate this with valve timing but it will remain more prone then a no offset engine.
You are genius. I learnt a lot from you for last 3yr continuous watching videos and exploring my vision and thinking, so thank you so much and keep doing the stuff
You were already very good with explainations, but this video is next level. The 3D model with all the measurements make your statements very simple to explain. Thanks for the good work and sharing.
Each and every time I watch your excellent videos I am hugely impressed by two things: How absolutely brilliant engineers who design these mechanisms are, and by how very well you explain these complex topics in a way that I can easily understand them. Keeps the great work up, please. Very much appreciated.
What's genius about this design, is when the plug ignites, the crank is already at an angle so the force isn't going STRAIGHT down, it's actually acting like a lever. Then on the way up the angle is more dramatic which means it's much easier to continue moving! I love it! Also, I watched the whole video and it honestly made me want more lol
I have been watching your videos occasionally for some time. It is amazing to see how well you have improved over the years. Keep up the excellent work!
I fooled around with engines for years and never really gave any thought to off setting pistons and lengthening rods. I had a friend who made his own block. Now I understand what he was doing.Thank you for making these videos. c]8-)
Great video. I would like to see a video on how the engineers are designing the crankshaft for these offset engines to correct the greater vibration issues that it creates. Paul
I love your channel!! I’m an amateur hobbiest when it comes to auto anything but I do like to learn and you explain things so clear and precise that I love it! Tank you!
WOW! Excellent! Just simply excellent! Thanks a whole lot. I love the series of videos you’re putting out. This off set engine was really interesting. I had no idea the engineers were doing this. Don’t stop! Keep going!
ive found that using an offset angles had given a interesting upgrade to my own model engine; its beneficial to see different takes on somewhat set-in-stone layout conventions
Yet another great video. You're doing a really good job at explaining and showing highly complex topics in a way that can be understood by almost everyone. In my opinion this is significantly due to your very recognisable enthusiasm for the topics. Please keep it up and may the channel grow even more (three quarters of a million subscribers already seems massive, though. congratulations!)
Awesome presentation with great graphics and clear, concise explanations of how off-setting a piston changes the dynamics of an engine balance, efficiency and power. Thanks!
Absolutely amazing video and explanation!! what a fascinating concept it's truly genius, I can't thank u enough for your deeply educational automotive content unlike the channels who only explore things at surface level
I’m a mechanical engineering undergraduate currently studying kinematics and dynamics of machines, this video helped me to visualize the crank-cursor mechanism and it’s variations in a way that my professor with a PHD couldn’t
Balance shafts add friction,weight and complexity,not to mention the physical space they require.while not forgetting that just like any rotating or reciprocating component,they are driven by the crank meaning that energy is being spent in order to rotate and accelerate them. It stands to reason that anything added that takes energy from or adds a load to the crank will also slow the engines response to changes in rotational speed.
@@notpoliticallycorrect1303 a compromise worth it in your opinion for certain applications? I once drove a Mercedes 2.3 4 cylinder with balance shafts and I thought it had stalled at times when it was idling it was that smooth. But obvs the negatives you mention are the anthesis of a sporty engine. Still, was good enough for the 944/968 I suppose!
Great video I'm not even a mechanic or someone that interested in engines but I found this very informative and not even too complex to follow despite being outside my exiting areas of knowledge, truely well done.👍
me too! as I remember the wear from friction on one side of the piston was significant. however the shorter exhaust / intake time may impact things negatively I would love to be educated.
As I recall, it was the American race mechanic Smokey Yunick back in the . . . 50's? Early 60's? who first experimented with offset piston pins and found there was a marked improvement in midrange torque and longer torque curve his Cadillac test engine produced. The effort, as many of his efforts were concerned, related to finding a competitive advantage not considered in the rule book. Unfortunately, the change dramatically increased piston wear. So outside of circle tracks, the idea got little notice. Today's materials and production methods allow all kinds of clever old ideas to have new life. At the end of the 80's, Saab engineers developed a two piece engine separating crankcase from cylinder/head assembly with a flexible bellows between to keep the oil in. By slightly rotating the two assemblies relationship to each by fractions of degrees around the crankshaft, the motor could not only provide the torque changes seen with offset pins, but could also vary the compression ratio while in operation! This could be done at any chosen rpm, but then variable valve timing arrived and made the idea a historical footnote before it was ever produced. Bright minds, crazy ideas, fun times. Cheers
I'm impressed by your knowledge. You know much more about engine design and balance than I do despite my having a Mechanical Engineering and an Engineering Mechanics degree. Thank you for the lesson.
I should have asked about this when I thought of it while watching another of your videos on engine stroke, but now you're presenting it as an established design. Cool.
Good explanation, thank you so much! The drawings and CAD rendering are top notch tools the way you used them to visually demonstrate the geometry and mechanics. Thumbs up from a mechanical and aerospace engineer, cheers!
At 1.46 i can already see, The offset means after firing, The conrod of the offset piston is straighter. This means more of the power is being utilised. Stay tuned for more correct or incorrect guesses.
7.48. Offset creating unequal strokes… Hmm, Maybe, it can be configured so the pull stroke is larger, compression smaller, expansion larger, exhaust smaller?
I watched the video in my living room on my smartTV and just right after it finished I ran to my computer to write this comment: YOU ARE THE GENIUS HERE! I studied performance engine design and I was very aware of the offset cylinder/ offset piston`s pin benefits and challenges but NEVER understood it SOOOOOOO F***NG EASY as today!!! Man, this is Pure GOLD. I always found your videos interesting even when I know the topics because you have that unique way of explaining things that is enjoyable and also fun. Great work man! Keep up the goord work, thank you!!!
Imagine the difficulty trying to cycle with your knees directly above the centre of the pedals and sprocket... This video is incredible I had never even thought about offset cylinders
Outstanding as usual. I imagine a boxer engine would go far in aiding both primary and secondary balancing in an offset scheme. Also, any thoughts on the impact offset engines would have on engine rpm limits, as related to ring flutter, as a result of the varying mean piston speed?
Boxer will have a strong torque vibration, unless you run two crankshafts running in opposite direction. If you share the crankshaft then one bank needs to be offset upwards, and the other downwards.
Engine functions have always been a big mystery to me, so I'm grateful for any understandable information. Far from understanding it at an engineer's level, it teaches me to value the work of engineers and engine repair personnel. E.g. the dependence of the engine power on the exhaust gas resistance - who could imagine that?
It would probably be something like a 10 page list...Also, some manufacturers don't disclose this so you would need to buy a brand new vehicle and take it apart. What I know from the top of my head: Toyota dynamic force engine series, many of their hybrids too, Yamaha R1, Ninja Zx10r, all high capacity off-road dirt bikes except I believe Suzuki. And many many more cars and bikes, especially more recent ones. In general it was a lot less common in the past than it is now.
I've asked ChatGPT and it said While it's difficult to provide an exhaustive list of all internal combustion engine-powered cars that use cylinder offset, some well-known examples include: Ford EcoBoost engines - Many Ford models, such as the Ford Fiesta, Focus, and Fusion, are equipped with EcoBoost engines that utilize cylinder offset for improved efficiency and performance. Toyota - Some of Toyota's engines, like the 2ZR-FXE engine used in the Prius hybrid and other models, feature an offset cylinder design to reduce internal friction and enhance fuel efficiency. General Motors (GM) - The Ecotec engine family from GM, which powers a range of vehicles like the Chevrolet Cruze and Opel Astra, incorporates offset cylinders for better efficiency and reduced noise, vibration, and harshness (NVH) levels. Honda - The Earth Dreams engine series from Honda, used in vehicles like the Accord and Civic, includes offset cylinder designs to optimize fuel efficiency and reduce engine vibrations. These are just a few examples, and many other automakers might employ offset cylinders in their engine designs to optimize performance and efficiency.
This is my first D4A video on any engine design. All I can say is great job of taking the complication out of complicated concepts. Personally, I wasn't even aware of cylinder offset, much less its pros and cons, but now have at least a rudimentary understanding. I wish you would have done a little more about solving the balance issues associated with the offset design. Maybe it's already done in another video, but I'll find out as I watch others.
Become a Tuning Pro: hpcdmy.co/dr4a
Support the channel by shopping through this link: amzn.to/3RIqU0u
100 cars that changed the world: amzn.to/3DGXDf6
Stem engine model: amzn.to/3Y5iZLv
Motivation: ruclips.net/channel/UCt3YSIPcvJsYbwGCDLNiIKA
1-2-3 count with Car parts: amzn.to/3jxP7Z6
Patreon: www.patreon.com/d4a
14:45 time is a false measurement here.
It would be better to operate with a angle*momentum sum across the combustion stage. Here the difference in top dead points is kicking in: making the momentum more linear, normalizing piston speed, increasing fuel burning duration thus allowing fuel to burn completely.
Balance issue is not an issue actually.
Vankel engine has same offset geometry, and solves the problem with excentric geometry of the crankshaft
That is interesting and makes sense as it's making more out of what it's given eg the time, so I'm thinking with different compression stroke,less time, would it be better for boosted engines be that supercharged or turbo
I love that you made this video. This is such a great lesson on engineering. Sometimes what may initially seem weird or counterintuitive identifies an aspect that can lead to creative gains.
I wonder if alternately offsetting the pitons would help the balance. You might need to have a different firing order and inlet and exhaust valves also on alternating sides. I am too tired to get my head around it at the moment, but I might think about it when a bit fresher.Great explanation, thanks.
Your calm, gentle tone without any background music or sudden, "startling" audio tracks makes this channel leagues ahead of others. No distractions. Just pure education. Thank you! ❤❤❤❤
I think you'd like Hexibase. RUclips him!
Amen
Nah, I think he should keep showing cascading stacks of hundred-dollar bills, and show fake film projector scratches, as though it is old footage, and he should add a fake A.I. "narrator" who can't pronounce words, names, or numbers right. And some crappy music. :) BTW I never knew this about engines, even though I run engines all the time and know a few good mechanics. Very interesting stuff!
Works with 1,25 speed also!
@@afro8859 or with 0,75 speed for ASMR
In the trucking world the offset cylinder (commonly referred to as downsped engine) does wonders for the engine performance. Slower piston speed means more torque at lower rpms while increasing fuel efficiency. It also increases exhaust temperatures which helps with all the emissions components. Pretty amazing to move up to 80000lbs at 950rpms at 65mph and getting 10-12mpg.
This means that it also has a lower rpm limit, 1000 rpm on a diesel would be equivalent to 1.5k rpm on a gas engine, they move at the same speed.
Is this guy talking about Chrysler's 1959 slant 6? For all you "this changes everything" modern day idealists... please keep in mind quad copter drones were invented in the 1920's, and were among the first successful heavier-than-air flight "VTOL" vehicles preceding helicopters, and electric cars were around from the very begining of personal trasportation. With the first example of an electric car in 1830, but by 1900 were 38% of Americas automobile market, with steam taking 40%, gasoline 22%, and diesel just recently invented in 1893 as a means to use cheaper low grade fuels. Diesel is only more expensive because the government puts a TAX on diesel fuel, and now also requires DEF as well.... I'm still waiting for someone to re-introduce steam vehicles, so this guy can make a video about how THIS CHANGES EVERYTHING.
@@Ed-ty1kr
Starting in 2007 here in the USA the feds mandated "ultralw sulphur" diesel fuel, among other emissions reduction devices and systems. (Think DEF, DPF, along with some other ideas integrated into these new systems).
It's unfortunate how technology has improved dramatically in the diesel industry just to be negated by the over the top emissions reduction systems mandated by the fed. In 2007 they essentially raised the price of diesel per unit, gallon here in the states, which of course became a permanent raise in cost, supposedly to offset the cost in the manufacturing and distribution of the required ultra low sulphur fuel...all the while achieving this new standard of reduced sulphur by simply taking said substance out of the "mix"...in other words charging us significantly more per unit of fuel by the reduction or even elimination of a key component which in the past was used to lubricate the moving parts of the fuel system itself. Well not just moving parts but also critical yet stationary parts like the body itself of a diesel fuel injector. This whole concept of what went down here in America around 2007 is so frustrating to me. As a life long mechanic with experience in internal combustion gasoline, compression ignition diesel, 2 and 4 stroke gas, and even electrical (EV) powered vehicles found in the forklift and equipment fields. In addition to the wrenching experience and understanding I also worked a relatively small window of time in the refinery business around this time of 2007. Much work was needed for the refineries to be "ready" to make, distribute and sell this new "ultra low sulphur" fuel and therefore refineries everywhere went under humongous updating projects. Many bodies and brains were needed for this task. I hired in at the Marathon refinery as a contractor at their elaborate plant here in Detroit, basically i-75 and Fort st./Schaeffer Rd, near outer drive amd Dix Ave...anyone from around the knows the plant and it's location. I found that job very interesting, despite being temporary I still spent about 2 years on site learning something new every day about the refinery process, which honestly, was rather rewarding.
In summary, it's almost as if some kind of globalist cabal who secretly run things from behind closed doors and it's almost as if these people didn't want more efficient diesel engines which essentially move and power this entire world we live in, where every aspect of our daily lives are affected by a diesel powered something somewhere along the way. All these EPA backed emissions reduction acts and mandates have crippled the Diesel engine industry to where people actually believe EV's could save the entire world right now...which they cannot. Ever. Efficiently. Replace ice and diesel.
In a dream last night I actually imagined the newest most bestest thing ever...a vehicle powered by...
Coal! Then I woke up and had to pee.
@@williamstamper442 EPA and DOT measures became overreaching sometime around 1969, with 5mph bumpers that by the early 1970 made American muscle cars sinfully ugly, with huge protruding bumpers, and emission systems that dropped 350 to 426 horsepower cars down to slow, heavy, and gutless 150 hp gas guzzlers.
But this actually goes back to 1913 and Woodrow Wilsons Jackyl Island treason, that the British Royalty literally paraded him through London for. Henry Ford was quoted as saying its just as well the American people are ignorant to finance, cause if they knew, there would be a revolution by morning. Not an exact quote but something to thar effect. Which got really bad around 1964, post Kennedys famous secret societies and proceedings speech, which was just weeks prior to his assasination. Funny thing you mention Globalists cause it was with George H.W. Bush involvment, a known and admitted Globalist within the CIA, who later became Regans VP as Regans alzheimer's set in. Then became President giving the world his famous New World Order speech, with creepy undertones saying things like "and when we are successful, and we will be". Followed by a short Clinton break, with MK Ultra and Tuskegee human experimentation on American citizens admittal and lame appology, and then by his son and fellow Bonesman" George W. Bush Jr.
There is a documentary you can still watch on Internet Archive made in 1982 called The Killing of America, that although is aimed at gun control, still documents the drastic decline of American society into violence, mass redrum and general crime up to that point in 1982. Directly links Kennedys assasination with the crime rate, violence, and general depravity as if some great evil had decended upon the land. Which only got worse thanks to the CIAs Contra Cocaine "conspiracy" and introduction of crack cocaine onto Americas streets, only now trumped by fentanyl. Which... started with LSD's introduction, the first poison unleashed on the nation. And who created that? Look it up, it was nothing new, it was as if it was deliberately released onto the soft heads of Americas youth, by design, on a large scale, and almost immidiately in the late 60s post assasination like clockwork. So now its fentanyl but its the same game, new millenium.
Look into a book called The Psychopath Machine, written by an MK Ultra survivor, who claims MK Ultra was not to create psychopaths, but to identify and install psychopathy in prominent positions. By identifying through tests and examinations all existing sociopathic personalities, so as to find candidates for the military industrial complex bureaucracy, top medical professionals and doctors, university psychologysts, federal judges, top law enforcement professionals, and the now famous Wall Street American Psycho business personelle. Everyone thinks MK Ultra was to create psychos, but why create something if you can recruit existing?
Anyhow...
As far as Globalism the world we see today is a direct product of their actions. Just look up the definition of GLOBALISM and see if that fits the world we live in. Look up World Economic Forum videos and whitepapers, they dont hide much, for they assume we are all just ignoranr commoners.
I still recall Ross Perots "Great Sucking Sound" speech he gave with Geroge Bush Sr. on his right, and Bill Clinton on his left, as he told the nation we will see our jobs sent to Mexico and overseas if we elect either one of those two candidates. Thar was 1992, and Boy was he right, they literally sent all Americas industry... tooling included.. to Mexico and mostly to China, because the "Chicoms", view communist China as the model for their New World Order or Great Reset. Where they can Build Back Better their tyrannical dystopia where you own nothing, live in 15 minute prison cities, have no privacy whatsoever, and eat a diet of bugs. But only after they tear it all down and bring the western world to its knees, cause you must tear it down to build it back.
Looking further down the now well proven and documented rabbit hole we see the same mass migration mentioned in Globalisms definition, in both Europe and the United States, with the 3rd definition for globalism given as : An ideology based on the belief that people, goods and information ought to be able to cross national borders unfettered. So we see our boarders disolved or non-existant, with our military or "defense" spread out to hundreds of bases world wide, and fighting or aiding in just about every conflict anywhere including Ukraine. Which was a military industrial complex and George Soros color revolution construct, designed to fight Putins refusal to play along with NATO's clear rejection of the treaty written up by Gorbachev while the Soviet Union was disolving, not to impose NATO onto Russias doorstep. People dont know about any of that, and how can you blame them they dont work at the United Nations, so they support whatever the media tells them. But it was actually over a treaty that was not upheld by NATO, and the nordstream pipeline that has most of Europe now feezing to death. They did it by first meddling in their already fraudulent elections, playing dirty games with Ukrainian oligarchs who are actually just the corrupt businessmen and gangsters that came out of an empires collapse. They got involved with installing of puppets like Zelensky, possibly even Putin himself for all we know, and subverting their society through color revolutions that are always signified by the famous RAISED FIST. Running criminal bribery based public private partnerships which is basically just a soft modern term for fascism, first coined by Mussolinni the italian dictator during WW2. This tactic then was turned inward onto the American people in 2020, and we ended up with cities burning, and public private partnerships set up during the Bush era that is now no longer just working for the government as contractors, but now controlled the government through public private partnerships.
Anyway it is FASCISM, its set up and ran by Globalist wealthy self declared elite stakeholders, and it is just a means to impose a world government tax on the common people ONLY, while they continue to jet set and yacht around the globe in vehicles the DO NOT ACCRUE CARBON CREDITS... Yes you read that correctly, private jets as well as vessels above a certain size do not have to abide by carbon credit global government taxation. They solve nothing, they impose all these measures like forced injections and central bank digital currencies linked to social credit scores... but they serve absolutely nothing except to make them richer and more powerful. It is an ideology of haves and have nots, of serfdome, a cass system, a communist fascist socialist dystopia where your only rites are to depopulate yourself by assisted suicide, with their war on carbon being a war on all of us carbon based life forms.
Sorry for typos, and sorry for it being so long, I couod write a book on the globalist tyrannical nightmare society they are building. And yes , they penetrate the cabinets as Klaus Schwab says, and destroy whatever they lay their greedy, grubby, filthy paws on. Period
@@williamstamper442 LOL ... I got a good example of Globalism for you Will... Nevermind these wasteful batteries that lose God knows how much energy being tranfered down sometimes hundreds of miles of power lines, with losses through resistance clearly shown by simply looking at them through a thermal camera..
But can you explain to me how does this Gloablist process make any sense to you? They source cod or chicken or whatever perishable refrigirated commodity here in the United States... only to ship it to China to be sliced up and packaged. Then ship it BACK to the U.S. to be placed in supermarkets.
Is that globalism in a nutshell or what?
Not a engine person at all but you break down the Physics so simply and speak with such a passion that its a joy to watch.
So many of academic books seem like they are written for people who already understand topic at hand. Your approach is complete opposite of those boring and soul crushing books. Thank you!
D4A channel is top tier! Your passion and dedication shows, and it's obvious you have a lot of empathy and understanding for those of us who are at the beginning of our learning journeys.
Offset cylinder is called desax
I love these videos, you have a great ability to take deep dive into a complicated, almost nerdy subtopic, and illustrate it in a lighthearted and engaging manner.
Big facts 💯👆 very well said
if this is ALMOST nerdy to You, im scared to ask what is really really nerdy XD
@@jesusfreakpl I'm currently watching a live stream of two astrophycisists debating a scientific paper discussing the nature of a particular, albeit peculiar asteroid; that is full nerdy by my standards
@@jaybruce593 please tell me Neil D Tyson is not one of them 😩
@@jaedanoeugene4004 Don't worry, it was Avi Loeb and Bian Keating, discussing Oumuamua. I like Neil De Grass Tyson, but nearly everything he does these days has his side kick "chuck" who always derail the science to make dumb jokes, or the conversation gets dumbed down to a point where he, as a non scientist can follow it.
I am a automobile teaching professor the degree angle of rotation was explained phenomenaly hats off i will recommend this video to my students and show this video in my coming lectures
People are always surprised how well these videos take complicated topics and explain them clearly step by step. That's what we need to teach kids in school - the way to organise your thoughts in to small chunks, put them in a timeline in a correct order and present them to others. It's reading, writing and critical thinking working together to produce successful communication. That way you accurately express your thoughts, the other person understands them as you meant it and everybody is on the same page. Also, that's how you teach others. Also, it's THE way to erradicate common misunderstandings and arguments people get into simply cause they got each other wrong. All the fights in the comments sections, under news articles, in the public arena, in the media...
You need to learn to think like an engineer, in logical steps. Then you can explain a trip to Mars to a 5-year old.
To achieve that you need a "teacher" with an intimate understanding of the subject to begin with.
True. Thanks man.
@@MrCanonballs And, of course, students with a keen interest and willingness to engage and learn.
thank you one more super good video but i did,t undurstant how they finale balans out the engine ? ? ?
Idk what school y’all go to but they teach that stuff in my school
I'm a mechanic with some engineering experience and your videos are amazing for bridging the gap between practical and theoretical knowledge. The way you teach by gradually introducing the mathematical concepts alongside the practical demonstrations make your explanations work. I'm sure someone with no engine experience would struggle, but I think your videos are an excellent resource for people like me who need more theory, or people like engineers who understand the theory but rarely work with the actual application.
Ever heard of David Vizard? He has a channel and is essentially an engine-building legend. He also donates to St. Jude"s. He offset an engine's bores what I'd guess was decades ago.
I am as you and agree.
Changes everything, I bet it won't change the colour of my car.
If you're an engineer, you surely realize the offset engine has a longer rod or longer rod bearing distance from crank center to do this. They are not the same as the centerline rotating engine. This is part of where the "increased intake gas" comes from. That point was completely skipped over, intentionally I suspect.
Most certainly agree !
Many years ago as a student I visualized this idea of an offset crank and wondered if it would develop more torque. Thanks for so thoroughly exploring and explaining this topic. Fascinating.
Cranks get modified for offset grinds to increase stroke. Machine shops have been doing it for decades.
@@johnhendel7357exactly my dad and I talked about this years ago. his best friend was an engine machinist at the time.
There are two ways to apply offset. You can either "move" the crankshaft off the centre line of the cylinder or you incline the cylinder slightly. The effect is the same. This has been done for at least 80 years to my certain knowledge. In the 1950's it was normal to rebore an engine after as little as 25,000 miles. This was done with the block in situ. If you didnt allow for the offset when setting up the borer you destroyed the block. Later the cylinder was offset laterally to make maintenance easier. This information is hidden in works maintenance and overhauling manuals.
Thank you for sharing your knowlegde ❤@@davidh3486
It's amazing how changing a single parameter (crankshaft offset) produces such complicated knock-on effects for a multitude of other parameters. Thank you for breaking it down and making such a complicated amalgamation of forces understandable!
Hi sir im a big fan of yours i always watch your videos and i realy love it, im a racing mechanic i do upgrades with bigger cc and defferent engine configurations i hope that you recognize me sir
Hello
engine knock-on
I love your style. The combo of personality, accuracy, detail and pace is perfect. I've been teaching for 27 years and it's is rare to find these properties, all in one presenter. Thank you.
I made it to the end!
When I was young I raced bicycles. All of the dynamics you have mentioned are directly related to bicycles.
When you are starting at the line no one in they’re right mind would set the peddle at the twelve o clock point. You might even hurt yourself if the peddle can move freely in reverse.
Seat position forward and back are important as is seat height.
I never thought about why some of the practices we used were helping.
Great video!
Great point you have made, about applying some of this science to a common bicycle. As a mechanic, car guy, drag racer and all those dirty things I still love my bicycles too. Now you got my brain smoking overtime as these principles are applied to our pedal powered all capable machines!
I uses to race bmx also Jack pine lodge , in bath mi. 1979 , 1980 ( i think ) I showed up with a hacked up huffy street bike , that i cut the crank and lengthened the pedal stroke , if you werent careful you could stub your tow and twist them backwards , i had it that long ,
But it worked great , i was out in front most of the time , that area at that time hadnt seen much experimenting like that , but it caught on quick , and i picked up shwinn in east lansing as a sponser , got me a fancy schwinn mongoose , they just came out back then ..
This video reminded me of the Shimano “Biopace” chainrings in the early-mid 80’s designed to take advantage of that bicycle pedal stroke.
Excellent video! You missed one very important point. The offset cylinder moves the point of maximum combustion pressure closer to the point of maximum mechanical advantage. Also, the same effect is often achieved with an offset piston pin location in the piston design. The lengthened intake stroke duration is very helpful in naturally aspirated engines. Getting air in is much more difficult than getting it out!
I was imagining these concepts in my head
Okay, cool. So could a small block Chevy, for example, be improved in power output by forging pistons with a crank pin hole drilled a few thousanths offset? (Obviously keeping it small enough to avoid destructive vibrations) Is this being done, say in the drag cars? Is there an emerging cottage industry?
Seems a manufacturer could take advantage of this without an entire redesign. Is the old Rambler 6 in my Jeep good for another 8 hp? I’ll keep it under 10,000 rpm, promise!
@@russbell6418 just spin the pistons. They already have a little offset. It will be noisier and vibrate more though
Loss of stroke but also loss of resistance to push the crank twelve to twelve o one
Don’t even start about what the other cylinders are doing to change all the math.
I learn so much from your channel. I've built several engines in my lifetime and have worked as a mechanic in the past. Videos like this show me the gap between what I KNOW and what I fully UNDERSTAND. Thank you and please keep the lessons coming.
I had no idea of this technology . Your explanation of this was very clear. I can only imagine the time spent editing this video. Thank you
for your time and effort to create this.
The "classic" mechanical name for crankshaft offset from center bore line is "DeSaxe" offset. It has been used for nearly 90 years (off and on) for Two Stroke engines (especially Model Airplane engines), but there were even some stationary steam engines which were "DeSaxe'd". Up until only recently, vibration and harmonics were always a problem. Kawasaki first used it on some of their big bikes in the early 2000's but didn't quite get it right for some time. Now, it's pretty common. Back in the early 1990's my automotive mechanical engineering professor said there was nothing new (un-tried) in internal combustion engines for nearly 60 years... he was right. Many of the first attempts were way ahead of the technology (particularly materials, and understanding the concepts of good combustion chamber design). We take for granted CAD and Fluid Dynamics modelling software and digital ECUs. Back then, they had slide rules, sine and cosine tables. Perhaps the most advanced thing available in the late 1950's was something akin to an oxygen sensor (the size of a tanker desk) in the engineering area... times have changed. Great Video!
@Matthew Helton Reading your comment made me really smile.
Back in 1972 when I was doing my final work (diploma) for my degree in Mechanical Engineering (Lucerne, Switzerland) one of my student fellows was given an assignment by the Head of the Engineering Department at SULZER Switzerland (back then famous for ship diesel engines powering big oil tankers and freight ships). The task was a principle study of a variable offset diesel engine and to investigate what advantages and consequences could be expected from such a design.
Since I had completed my task a week early and was bored, I suggested to my colleague that I would write a FORTRAN program to calculate the friction losses over the four cycles as a function of the variable offset. The result was a surprise for both my professor and the expert from SULZER.
By the way, even then we had something more than just slide rulers and sine and cosine tables, namely an IBM 1130 with 20K main memory and a 5 MB disk. Nowadays, most people are surprised that you even could do anything with it at all.😀
Kind regards Florian Eggenberger
I'm curious how this technology could be applied to stationary steam engines. The steam engines I'm familiar with have a power stroke in each direction because they admit steam to a piston face at both ends of the stroke. Could you point me in the direction of an example I could examine?
@@cdjhyoung Quite a number of high-speed stationary steam engines had single-action cylinders and were used a lot for power generation. The Willans engine and derivatives were widely-used for example, and the Westinghouse High Speed Engine in particular was a single-acting desaxe cylinder steam engine that was commercially produced.
the author has a talent for explaining complex things in simple terms!
All I can say is "Every thing is simple, we only make things simple complicated.
Haven't learned as much about an engine since I learned about combustion cycles at 8, about 35 years ago! Great video!
I'm an accountant but I'm always fascinated by these videos & drawn to being able to understand complex mechanical engineering
The Toyota 1.5L 1NZ-F(X)E was a relatively early example in the economy car segment. Sounds like a tractor, vibrates noticeably at idle, but returns 50+mpg on a run and makes good usable torque from 2500-6000rpm. I'd say it's a fairly typical example of what you described.
My car gets 55 mpg at 2000cc 😎
@@TheSuperBoyProject what çar is that exactly?
On paper it got good mileage but it has a very narrow torque curve and was coupled to a gear box with very high ratios. Also built like a lawnmower engine making extensive use of pressure die cast parts.
I noticed the 'suped-up' engine mount/damper at 19:25
I thought who would just build the engine and counter the vibration issues during fittment of said engine?
Well thanks Henry Rolt, Toyota did!
In this day and age I think, given the option, most consumer car buyers would opt for extra mpg over a smoother ride. In fact, if a car returned 125mpg but rattled your fillings out, it would sell like hot-cakes and come witha free gumshield!
Fiat 850 from the '60s in the first one I ever worked on.
Explaining relatively complex things in a comprehensive way requires serious knowledge. Great video! Thank you for sharing it!
For what it's worth, I really enjoy the engine balance videos that you make. You are able to make complicated topics accessible to someone like myself who isn't a mechanical engineer.
I love these videos. I've watched your engine balance videos MANY times. I find all of your videos extremely informative, easy to follow, and easy to understand. You make intimidating and complex topics interesting and easy to learn. Please keep them coming.
I have been curious about the V12 recently. Not a lot of good content out there on how these engines work and I have read conflicting information about the bank angle and engine balance. Would love to see a video about how these engines work.
I agree. Very good work explaining complicated thought processes while all the time keeping us engaged, well done!
Great, thank you for the fantastic explanation.
As you say, it’s all compromise and the engine concept depends what you want in the end.
I guess the off-set engine is good for racing, the zero-offset good for keeping your teeth and spine in good condition for longer drives/rides. 😊
Off the top of my head, what I remember from a V12 is that it can be built such that it is perfectly self-balancing, without balancing shafts.
Regarding balancing V12s are often inherently balanced through any V angle because they can be arranged as 2 inline 6's merged together, and the inline 6 is intrinsically balanced using the right firing sequence.
@@peterjohnson9438 yeah, but why? V12 is always said to be balanced but people who say it does not explain why in any appreciable detail.
My grandfather worked in the early 1900's in Detroit as an automotive engineer perfecting the aluminum piston (Nelson-Bolen steel strut piston) and my father-in-law taught auto repair for decades. Me? I grow plants, but I am fascinated by engines and the human genius that makes them possible. Thank you for your in-depth yet understandable videos!
I'm more impressed with the fact that English is not your first language, and yet you explain the engineering and technical points in your videos better than many native English speakers, and that your content is on point, and illustrated clearly makes it easy for people of
*ALL* engine / engineering experience levels to increase their knowledge.
As a german engineer I appreciate your videos a lot. Thank you for your engagement to drill down the topics to the key points. 👍🏻
Sir, your presentation is top notch and so easy to follow. I have a pretty good knowledge of automotive technology but was never aware of cylinder offset. Your animations are so valuable in helping to illustrate all the complex geometry that takes place during crankshaft rotation.
In the early 1990's I read a paper on how a longer rod length affects power characteristics and I remember the classroom discussion was along the lines of, "we've been doing this long enough that we're now able to look at smaller details than ever before." Offset engines are a surprisingly simple and subtle change to how it's always been done, but as soon as I saw your first charts, I was able to see some of how it would be an improvement.
Very well taught.
Steam engines used offset engines over 100 years ago, and the Volkswagen vr6 and vr5 are off set, but instead of offsetting the crank, they would offset the angle of the cylinder bore.
@@klubstompersI guess I could sleeve my engine then bore the cylinders off center.
@@wannabecarguy Yea, you'd only have to that and mill the block top at and angle, fill all oil and coolant passages the angle interferes with in the block, re-drill new ones, custom crank balanced for the rod angle, custom harmonic balancer, run a custom timing chain system or belt, custom header or down pipe to accommodate angle, all for zero HP gains. Cake!! :D
I really didn't have much interest in ICE before coming across your channel, your in depth clear explanations made me appreciate engines a lot more. Watched it all the way through too! I would love a video regarding the R1 or ZX10R engines; however, I would understand if the material on the balancing of these engines would be hard to get.
He already did a video on the R1 engine: ruclips.net/video/uM-ycHS9uvw/видео.html
If you're talking about the modern crossplane R1 there is lots out there about its inner workings, Not so sure about the ZX10 however
I'm interested what you meant by "not much interest in ICE." Did you mean you were interested in cars but only electric ones?
@@jaredlancaster4137 Perhaps like me, I took ICE for granted. I use them, wasn't really curious about them. I'm interested in electric motors, but for industrial applications, not cars!
Absolutely well done! I plan to show this video to my engineering students during machine design lecture! Thank you so much!
You are always able to explain these difficult and tedious concepts in a very clear way, I'm not saying I could engineer an offset engine now but I completely get the concept and complexity involved. I love your channel.
This was a brilliant piece of work! Just the time spent on the CAD animations must have immense. Thank you, I really enjoyed it.
Great videos. When I wrote my books on the Yamaha KT100 two-stroke kart engine, I became fascinated by piston pin offset and rod angle because these have a marked effect on the timing of the ports. As I commented on the prior video on rod/stroke ratio, I believe that piston pin offset, and cylinder offset (those having the same geometric relationships) affect camshaft events. All this prompted me, with a Cosworth engineer friend, to produce a piece of software that calculates stroke/rod ratios, the location of the piston in the bore, the piston location at TDC and BDC, and everything in between.
I thought I was pretty familiar with 4 -stroke reciprocating engines. And many of the subtleties that effect their performance parameters. Torque /HP vs RPM. Subtle changes in intake and exhaust flow vs. RPM resulting in changing Torque/HP curves.
Every time I watch your channel, I learn something totally new to me. Thanks.
Impressive. I've read a bit on offset engines, but your explanations are much more complete. Thanks a lot for this. I missed how big the offset can be and when the cons are greather than the pros depending on it.
The offset usually ranges between 4mm to 10mm, too large leads to diminishing gains. But there are engines with as much as 12.5 and as little as 2.5 agaik. Offset in the video is exaggerated to 15mm to make effects more obvious.
@@d4a hi, is the suggestion that 7 mm offset is an average? or is the optimal offset based on the stroke/ rod ratio?
@@d4a I'm probably misunderstanding but if the offset decreases the rod angle and therefore the friction on one side of the cylinder wouldn't the increased rod angle while it's on the other side cause increased friction, negating the benefit?
@@dr.brianadams6542 the highest side load is during the combustion stroke. The difference is not small either. Go back to the vid on Miller, Otto and Atkinson cycle engines for another benefits.
I have seen your videos of the 4-V, 4-opposed boxer engines, and found them very interesting allowing me to reduce my ignorance in such subtle differences. I really see the balanced engine as great, maybe I sense that it lends itself to a quick massive application in opposed-cylinder engines or even in boxer, even better. And the coolest thing is that it would never have occurred to me, "advancing the crankshaft", turning it when the piston reaches TDC, is really a new way of extending intake timing, generating "ignition advance" and reducing engine speed. expansion effort after the explosion with a lever arm helping to rotate the crankshaft. The concept that he has so clearly explained to us with his beautiful lecture on the subject of balanced motors is really great. Thanks for your class!!!, Greetings from S.L. Arg.!!!
picture that, i interrupted a political video to watch this as soon as i noticed the notification
I know right,
I stopped browsing auto-trader at cars I’m never going to buy to watch this.
@GTRT-KiloWatts aaaaaaaaaa❤❤❤❤qqqqqqqqqq
So did I 😂
Me tooo! So much more relaxing!
Same. Lol
Seeing this video is a bit of a shock! I proposed this idea to General Motors (I was a Chevy guy then) about 60 years ago! I had built a flat model where I could tilt the "cylinder" to create an offset and crudely measure the change in intake/power strokes to the compression/exhaust strokes. I sent them a letter and some drawings mostly stressing the benefits of increased duration of the intake and power strokes. I had figured out most of what you cover in your video save for the vibration issues. I believed the vibration wouldn't change with a cylinder offset. I think I also missed the different stroke lengths but hey, I was only 15 or so at the time.
To my great surprise, GM responded! They said they had tested the idea and it didn't yield any noticeable benefit. Did they just blow me off or had they really tested it? If they did test it, did they change the ignition and valve timing, I'll never know.
Great video! 👍
GM in particular, but all the big three have been using offset wrist pin placement for well over the past 50+ years in everyday production. Most of this was to reduce piston slap, thrust wear on piston skirt when cold and in general quiet the engines down. With that said they also had slight increases in torque in mind, across the board at relatively low rpm levels seen in our daily transportation still to this day. "free" torque improvements are an increase in efficiency and we all like the way that sounds. Unfortunately the way the oems have done offset wrist pins in order to quiet down cold starts and such ended up cancelling each other as one bank on a V8 would be offset in favor for small increases in efficiency, but the other bank on a V8 were offset to just take the load off the thrust side of piston skirt with a net negative effect on efficiency. That's what I meant by any gains were cancelled out on the other side of the engine. They still achieved their goal of reduced engine noise however
Nascar engines were allready using it acording to articles written by smoky unick it dose decrease piston and cylinder life to a degree
In the 60s, valve actuation was the rage. Ducati and its desmodromic system, conical valves springs, roller rockers, etc. Bored in high school, I doodled an engine with solenoid operated vales. Lotta good it did me. I also designed a crankless engine with piston position sensors to operate the valves, but there was no way to directly extract power from it.
Your delivery, humour and insight are absolutely perfect. It's not often I laugh out loud watching videos like this and I'm only ashamed it's taken me so long to stumble onto your channel.
Gotta be one of the best engine design channels out there!!! I am always amazed how new videos can cover things that I had no real comprehension of while making it simple and entertaining to watch.
Like answering questions I didn't know enough to be able to ask...
Thank you, professor! I have a horizontally opposed, air-cooled, VW engine that I increased from 1.6 to 2.0l by increasing stroke to 78mm and bore to 90.5mm. The pistons are offset by design and the arrows stamped on the piston head aid in proper installation.
I now understand why, even though I took great care in balancing the rotational elements I still get slightly annoying vibrations which I cannot tune away.
So, I can stop pulling my hair now.😂
I would also add that I increased the rod length from 5.4" to 5.5". I can't recall now why but probably the compression ratio which is approximately 7.8:1.
Piston offset is something entirely different than offset rods. Piston offset is there since the Ice Age. It' s goal is to slightly increase piston dwell time at top dead centre thus decreasing piston slap (a ringing sound) and decreasing load on the wrist pins and small end of the rod. Same is achieved with offset rods, but that is only one aspect of offset rods.
puerco, opuestos no es boxer
paul, i get what u say bout offset rod
but piston ofset ain't know wy t wld b diffrnt
@@Xayuap with offset piston the piston rod and crankshaft are still inline
t ain't dat w r xplainn n d vid?
I opened this video while searching info in the process of designing something very far off the engines but the video was still explaining a lot about what I wanted to know. Thanks! :D
Thank you very much for your detailed videos. I'm now 41, if I had watched your videos when I was 15-18 I would surely had become a car mechanic.
Wow, you have explained so many things that us ordinary mechanics never think about it . Fuel, compression, spark, it runs. Yay....
Neat thing about the secondary balance in an offset engine, is you can just ignore the small forces and balance out the larger ones. As well, because they are not uniform in distribution, they are less likely to cause catastrophic issues from resonance.
Used offset pistons in a Ford 289 years ago with 11.6 to 1 compression ration. It was a torque monster, and nearly unbeatable in a 1963 Fairlane Sport Coup. Surprised many a 396 Comero and 440 GTX owners who just could not believe what just blew past them after giving them a head start from a 30 mph roll, only to inquire when catching up afterwards about my healthy "big block". That offset made a huge difference.
im sure being a 500 lbs lighter than the camaro and 900+lbs lighter than the GTX played a small contributing role as well : )
Your "challenge" at the beginning already told me that you're going to give a great presentation....Wasn't disappointed at all...Thank you sir
Good stuff. I've studied engines both internal and external combustion from some pf the earliest designs all my life. I love how much I learn in minutes that used to takes hours and days reading old design books or observing actual engines broken down, which was exceedingly rare. Thanks for all your efforts.
So many people show there interesse on this channel, and I count myself among them, only because your talent, your ability to make so complicated topics, maybe not uncomplicated, but for sure more digestibile for us ordinary mortals. The fascinating world of motoring is reviled before us, with you helping, so it gets even more fascinating. Thank you for that! 🤓👍🙋
We're all ordinary mortals ☺️
@@d4a maybe you are, but thanks to denial I'm immortal.
The last part of the video really gets interesting. It's all about the differential equations that governs the system. The small axis shift produces a new interpretation of the engine.
These are things that deserves the mathematics explained in exhaustive detail. Tribology is a fascinating discipline that deserves a place here youtube.
It's in the smallest of details where great ideas can form. Knowing what each part does by itself and in relation to its neighbor helps to create an instinctive understanding of the whole system. Some relationships have flexibility while others don't, and your videos explore those relationships.
For 2 stroke engines the offset is towards the exhaust with the cranck that spins in the same direction. This allow for a longer time for the first blowdown to be longer than the second allowing the engine to run slightly higher
probably, the only non-bot comment. thanks for this comment.. I was thinking this would only be beneficial for a 2-stroke engine. The compression stage of a 4-stroke would completely destroy the presenter's efficiency paradigm.
@@derrikarenal3308 Think about how much greater the forces are in the power stroke. After all, that one stroke produces enough energy to get the engine through the other 3 strokes and on top of that produce a huge amount of energy to accelerate the car. So making the geometry better for the power stroke, easily offsets the penalty of making the geometry worse in the compression stroke. (Where the downward & thus sideways forces on the piston are maybe in the order of ten times lower).
Wow, this video is very usefull i wanted to do maximum possible overbore on my honda motorcycle but cylinder studs at the back of cylinder were limiting how large cylinder liner i can put in the engine, thanks to your video i realised i can simply bore out cylinder with offset and put bigger liners in it by offseting them forward.
This offset cylinder idea is the Désaxé design, started I think on steam engines. Early adopters of the Désaxé principle included Henry Ford who would fully implement the Désaxé offset into the Ford Flathead V8 engine throughout the 1930s while adopting greater offsets into the 1940s.
Did Ford stop applying offset on their V8s?
Yeah thats also what im wondering. Also did chrysler/gm do same offset thing during 50s and 60s?
The Moto Guzzi postwar Falcon 500 singles were Desaxe designs, I always wondered why. Now I know! Great video.
Yamaha has the offset too but it's in the piston!
Some of these engines suffered from assymetric wear, and were harder to overhaul, and had shorter working lives.
The one thing I noticed about the offset that wasn't mentioned was that the most extreme angle the con-rod makes is greater than that of the non-offset engine. This happens on the compression and exhaust strokes and would cause friction to increase with RPM, so I had been under the impression that offset engines generally produce more low end torque and have better efficiency, but the sacrifice is how high the engine can rev before it starts to lose power.
However, the compression and exhaust strokes are relatively low-stress periods in which the force on the piston is small, compared to the power stroke which has a very high force on the piston. Thus it gains more to reduce the friction coefficient on the power stroke than it loses to increase it on the others.
I'm not an engine nerd, but that aspect bothered me.
Yes, and no... at low RPM the friction from the power stroke goes way beyond the friction generated by inertial forces. But as the engine RPM rises the inertial-induced friction increases while the power-induced friction stays relatively the same.
@@saskprotogencyus2788 What you described happens to nearly the same extent in a non offset crank arrangement
@saskprotogencyus2788 exhaust is no problem as the force on the piston is relativ small. Compression is more annoying.
What is a problem is bottom dead center. Once the crankshaft get's past 180° and starts moving up, but the piston still moves to his buttom dead center the pressure on the piston works against the engine. You can compensate this with valve timing but it will remain more prone then a no offset engine.
You are genius. I learnt a lot from you for last 3yr continuous watching videos and exploring my vision and thinking, so thank you so much and keep doing the stuff
Thank you for watching ❤️
You were already very good with explainations, but this video is next level.
The 3D model with all the measurements make your statements very simple to explain.
Thanks for the good work and sharing.
Each and every time I watch your excellent videos I am hugely impressed by two things: How absolutely brilliant engineers who design these mechanisms are, and by how very well you explain these complex topics in a way that I can easily understand them. Keeps the great work up, please. Very much appreciated.
If you'd be a school teacher, you'd be nailing it, for sure.
Watching it made me understand camshafts specs instead of focusing on cylinder offset
What's genius about this design, is when the plug ignites, the crank is already at an angle so the force isn't going STRAIGHT down, it's actually acting like a lever. Then on the way up the angle is more dramatic which means it's much easier to continue moving!
I love it!
Also, I watched the whole video and it honestly made me want more lol
How the higher angle makes it easier to continue moving? I think I am missing something because for me it would be the opposite
Agree 💯
Ignition time is actually determined by the ECU, you can advance or retard the timing of the spark electronically.
The spark always occurs before TDC (ignition advance) so it doesn't really apply the way you think).
I have been watching your videos occasionally for some time. It is amazing to see how well you have improved over the years. Keep up the excellent work!
Hello John how are you doing 😊
I fooled around with engines for years and never really gave any thought to off setting pistons and lengthening rods. I had a friend who made his own block. Now I understand what he was doing.Thank you for making these videos. c]8-)
This is the best educational content on RUclips. Thank you very much!
Great video. I would like to see a video on how the engineers are designing the crankshaft for these offset engines to correct the greater vibration issues that it creates. Paul
I love your channel!! I’m an amateur hobbiest when it comes to auto anything but I do like to learn and you explain things so clear and precise that I love it! Tank you!
WOW! Excellent! Just simply excellent! Thanks a whole lot. I love the series of videos you’re putting out.
This off set engine was really interesting. I had no idea the engineers were doing this.
Don’t stop! Keep going!
This was an interesting topic and great explanation of the benefits and issues. I had no idea these sorts of engines existed!
I love that you built this up from basic to eye watering! Brilliant.
This was absolutely mind blowing. Thank you so much for your incredibly detailed research and explanation. This is knowledge gold ☝
Absolutely amazing, yet another concept i never even knew existed prior to this video, that i now feel very well versed in.
I love these kind of videos. The longer, the more details, the better. Im 40. My attention span isnt fried.
ive found that using an offset angles had given a interesting upgrade to my own model engine; its beneficial to see different takes on somewhat set-in-stone layout conventions
Yet another great video. You're doing a really good job at explaining and showing highly complex topics in a way that can be understood by almost everyone. In my opinion this is significantly due to your very recognisable enthusiasm for the topics. Please keep it up and may the channel grow even more (three quarters of a million subscribers already seems massive, though. congratulations!)
Awesome presentation with great graphics and clear, concise explanations of how off-setting a piston changes the dynamics of an engine balance, efficiency and power. Thanks!
Absolutely amazing video and explanation!! what a fascinating concept it's truly genius, I can't thank u enough for your deeply educational automotive content unlike the channels who only explore things at surface level
excellent explanation with clear and nice looking animation.
great job in educating engine geometry and operation. 👍👍👍
I’m a mechanical engineering undergraduate currently studying kinematics and dynamics of machines, this video helped me to visualize the crank-cursor mechanism and it’s variations in a way that my professor with a PHD couldn’t
I would love to see a followup video explaining how one would actually balance out the secondary forces
Agreed! How do we mitigate the non-sinusoidal nature of the secondary forces in the offset engine?
@@jeffreyswett6363I think balance shafts can achieve that no?
@@jeffreyswett6363 Since the secondary forces are periodic (regular) a Fourier analysis would determine the design of a counter balance mechanism.
Balance shafts add friction,weight and complexity,not to mention the physical space they require.while not forgetting that just like any rotating or reciprocating component,they are driven by the crank meaning that energy is being spent in order to rotate and accelerate them. It stands to reason that anything added that takes energy from or adds a load to the crank will also slow the engines response to changes in rotational speed.
@@notpoliticallycorrect1303 a compromise worth it in your opinion for certain applications? I once drove a Mercedes 2.3 4 cylinder with balance shafts and I thought it had stalled at times when it was idling it was that smooth. But obvs the negatives you mention are the anthesis of a sporty engine. Still, was good enough for the 944/968 I suppose!
This engine design is a game changer.
Great video I'm not even a mechanic or someone that interested in engines but I found this very informative and not even too complex to follow despite being outside my exiting areas of knowledge, truely well done.👍
Would love to see a video on how offset cylinders would work with a 2 stroke. Great video 👍
me too! as I remember the wear from friction on one side of the piston was significant. however the shorter exhaust / intake time may impact things negatively I would love to be educated.
@@Desmo500 I would imagine that the benefits would double, since on both downward strokes the engines are producing power.
As I recall, it was the American race mechanic Smokey Yunick back in the . . . 50's? Early 60's? who first experimented with offset piston pins and found there was a marked improvement in midrange torque and longer torque curve his Cadillac test engine produced. The effort, as many of his efforts were concerned, related to finding a competitive advantage not considered in the rule book.
Unfortunately, the change dramatically increased piston wear. So outside of circle tracks, the idea got little notice. Today's materials and production methods allow all kinds of clever old ideas to have new life.
At the end of the 80's, Saab engineers developed a two piece engine separating crankcase from cylinder/head assembly with a flexible bellows between to keep the oil in. By slightly rotating the two assemblies relationship to each by fractions of degrees around the crankshaft, the motor could not only provide the torque changes seen with offset pins, but could also vary the compression ratio while in operation! This could be done at any chosen rpm, but then variable valve timing arrived and made the idea a historical footnote before it was ever produced. Bright minds, crazy ideas, fun times.
Cheers
I'm impressed by your knowledge. You know much more about engine design and balance than I do despite my having a Mechanical Engineering and an Engineering Mechanics degree. Thank you for the lesson.
One of your best videos! Keep up the good work!
I love how these videos make pretty complicated concepts easy to visualize with exaggerated but still accurate 3D model representations!🤩
I should have asked about this when I thought of it while watching another of your videos on engine stroke, but now you're presenting it as an established design. Cool.
Good explanation, thank you so much! The drawings and CAD rendering are top notch tools the way you used them to visually demonstrate the geometry and mechanics.
Thumbs up from a mechanical and aerospace engineer, cheers!
Did the mechanical and aerospace engineer not notice the conrod fouling on/smashing into the bottom of the cylinder at 13:59?
Crankshaft: 🔄
Piston: ↕
Connecting Rod:💃
😂
Man, I love your channel. One of the best automotive engineering channels on RUclips. I'm a Mechanical Engineer
At 1.46 i can already see,
The offset means after firing,
The conrod of the offset piston is straighter.
This means more of the power is being utilised.
Stay tuned for more correct or incorrect guesses.
7.48.
Offset creating unequal strokes…
Hmm,
Maybe, it can be configured so the pull stroke is larger, compression smaller, expansion larger, exhaust smaller?
17.54
I don’t recommend doing it with your phone 😢
💥
I watched the video in my living room on my smartTV and just right after it finished I ran to my computer to write this comment: YOU ARE THE GENIUS HERE! I studied performance engine design and I was very aware of the offset cylinder/ offset piston`s pin benefits and challenges but NEVER understood it SOOOOOOO F***NG EASY as today!!! Man, this is Pure GOLD. I always found your videos interesting even when I know the topics because you have that unique way of explaining things that is enjoyable and also fun. Great work man! Keep up the goord work, thank you!!!
Imagine the difficulty trying to cycle with your knees directly above the centre of the pedals and sprocket... This video is incredible I had never even thought about offset cylinders
Outstanding as usual. I imagine a boxer engine would go far in aiding both primary and secondary balancing in an offset scheme. Also, any thoughts on the impact offset engines would have on engine rpm limits, as related to ring flutter, as a result of the varying mean piston speed?
I first thought of that then at 9° I thought VR engine, then I thought VR boxer
Boxer will have a strong torque vibration, unless you run two crankshafts running in opposite direction. If you share the crankshaft then one bank needs to be offset upwards, and the other downwards.
@@Blockbuster2033 julianKent is talking about the vibration caused by cylinder offset, and your idea is addressing rocking couple.
@@martin-vv9lf Absolutely correct, no idea why I didn't realize last year. I will delete my above comment.
Engine functions have always been a big mystery to me, so I'm grateful for any understandable information. Far from understanding it at an engineer's level, it teaches me to value the work of engineers and engine repair personnel.
E.g. the dependence of the engine power on the exhaust gas resistance - who could imagine that?
Hi I REALLY enjoy watching you educational videos, keep it up! Can you do also video about ducati or hemi engines?
lasted longer than you though
That's what she said (you wish)
That's what he said 😂
Beautiful. I'm a 66 year old gear head. I never knew about this. Mind blown, great job! (Nice use of Fusion 360 to show it, too!)
Can you summarize which cars / motorcycles / machines use the offset engine?
It would probably be something like a 10 page list...Also, some manufacturers don't disclose this so you would need to buy a brand new vehicle and take it apart. What I know from the top of my head: Toyota dynamic force engine series, many of their hybrids too, Yamaha R1, Ninja Zx10r, all high capacity off-road dirt bikes except I believe Suzuki. And many many more cars and bikes, especially more recent ones. In general it was a lot less common in the past than it is now.
@@d4a thank you. I didn't know this was a thing before your video.
@@d4aif the Toyota hybrid engines use that offset engine geometry they combine it with (pseudo) Atkinson cycle valve timing.
Very Interesting!
I've asked ChatGPT and it said
While it's difficult to provide an exhaustive list of all internal combustion engine-powered cars that use cylinder offset, some well-known examples include:
Ford EcoBoost engines - Many Ford models, such as the Ford Fiesta, Focus, and Fusion, are equipped with EcoBoost engines that utilize cylinder offset for improved efficiency and performance.
Toyota - Some of Toyota's engines, like the 2ZR-FXE engine used in the Prius hybrid and other models, feature an offset cylinder design to reduce internal friction and enhance fuel efficiency.
General Motors (GM) - The Ecotec engine family from GM, which powers a range of vehicles like the Chevrolet Cruze and Opel Astra, incorporates offset cylinders for better efficiency and reduced noise, vibration, and harshness (NVH) levels.
Honda - The Earth Dreams engine series from Honda, used in vehicles like the Accord and Civic, includes offset cylinder designs to optimize fuel efficiency and reduce engine vibrations.
These are just a few examples, and many other automakers might employ offset cylinders in their engine designs to optimize performance and efficiency.
@@d4a hi are you aware of any v8 engines using this?
This is my first D4A video on any engine design. All I can say is great job of taking the complication out of complicated concepts. Personally, I wasn't even aware of cylinder offset, much less its pros and cons, but now have at least a rudimentary understanding. I wish you would have done a little more about solving the balance issues associated with the offset design. Maybe it's already done in another video, but I'll find out as I watch others.