Just means you underrated your amp, it's a 2k amp being sold as a 1.5k. Awesome that you're giving the people more bang for their buck though, I support that. It's just a little easy being so conservative on your ratings and then acting all surprised when it does almost twice it's rated power.
Impressive efficiency @ 2 ohms. Close to the same output as the sfb 3k @ 4 ohms but the 1.5k pulled less current. Only about 80 watts difference. 1k was very efficient @2 ohms too. Digging these tiny amps. 👏👏👏
You should test the sound quality between this amp and a Korean board amp on a spectrum analyzer or RTA on a mic, use same power source and swap RCA's back and forth.. just a thought, I've always heard they sound different, I've always ran Korean amps myself but I'd run one or two of these on mids and highs (left & right)
Tbh going from my Rockford bdcp 1500 to a sfb 2000 I can’t hear too much of a difference if any in sound quality and with more power now it’s noticeably louder
I THOUGHT IT WOULD HIT 2100 WATTS BUT IT SLAPPED 2200 WATTS AND FOR THAT IT HAS EARNED MUCH RESPECT. THAT IS A BAD ASS LITTLE AMP. THAT IS SWINGING IN THE HEAVY WEIGHT CLASS.
Finally, Sundown sells a product that's very affordable, and passes everyone's expectations.! Good job! May just have to sell my Soundigita evo 4k and get a sfb!
Only if you got a 15 volt system so it drops to 14.8. Most all cars and trucks run about 13.8 volts at best. Orion does almost twice the rated power at 12 volts.
I may be mistaken, but I'm assuming the majority of people who are going to buy these amps are going to want to run them at 1 ohm for that power. I said it on your last amp test video and I'll say it again. It would be really nice to see the current draw at 1 ohm. Yes clearly pretty much everyone is going to need an upgraded electrical system to run this amp, but it would be good to see just how much current these amps draw at max power.
I would love to see another SAZ-1500D type monster. You through a solid electrical system w/ 14.4v + power to it. At .5 nearly 3000w was very possible and can run them all day. Love mine on my custom x-12v2 dual 1ohm w/ red spiders in a 3 to 1 4th order. It freaken slams.
@@josesalazar8976 It should but I did have to replace it pushing it hard with the bass way too high... just make sure they adjust it right on the settings
I think that's awesome..89 percent efficient at 1400 watts...you can't beat that at the price..very nice guys,I think these amps are going to be your best sells to date....
Well the Orion xtr 1500.1d has met its competition...I would get this instead of the orion amp. This amp is also competing with the skar 2000.1d rp....hmmmm....I'm done window shopping now. Sundown got comp....🤙🏽💪🏽🤟🏼👏🏽
I think it needs 2 fans one sucking air and one blowing air to get more efficient cooling across the board and I think you guys should look into maybe seeing if there is a manufacturer that would cut a hole through the board so you get a better airflow instead of just slapping it on the board cuz he would be a huge advantage to get air movement on both sides of the board that's just my thought then you guys should come out with a monoblock that is a cheap in a small as these cuz that's one of the only reasons I don't go for some of your bigger monoblocks is the price it seems like we're paying for a brand name and not sound quality anymore...... please don't turn into kicker......
Love the amp why the bass knob blinking instead of staying lit the music shuts out the blue light blinking soon I turn the music down it suddenly comes back on
Can anyone confirm if those are 2 awg cables he has hooked up for the power and ground? Also, what size fuse would you need to run this beast of an amp?
That is one of my main concerns as well...subwoofer sound quality vs that of a half bridge design. And also longevity of these vs Korean board. If I wanted to get one to run some nice mids and tweets I would do it in a heartbeat...but I need clean, rich, deep bass.
I don't hear any difference from my JL 1000/1. I got the SFB 3000d to run at 4 ohms as the JL was just a large footprint. JL was ran at 4 ohms as well.
When are you going dyno the SAEv3?, I purchased a 2500 for black friday, I tested it next to the D4S JP23v2 and the SAEv3 seemed a little louder at same volume, was wondering if it's safe to run at half ohm?
Hey man love the knowledge i have a question I wanna run the sfb8k and I have 2 American bass 18" hd1 subs will that amp work I know I could run 2 amps 1 per sub but will it work with one big amp
Exactly, these amps are rated too low in my opinion. It's one thing if your amps do over rated, but reaching rated power at 2 ohms is just way too conservative imho.
@@ThisGuyDrives Wasn't an accusation. But I have several Crown amps for home audio. My ComTech 1610 will do over 1600 watts into 4 ohms, or 800 watts *2 into 8 ohms. It weighs 58 pounds and has 24 TO-3 style output transistors. It will also do this 24/7 not for 5 minute bursts. I get a little curious about amps that do the same power into ridiculous car audio loads but weigh a few pounds, have no thermal mass for heat dissipation and insanely tiny output transistors. It pulled over 100 Amps at 14.4 volts. Put that power into a light bulb or a metal bar and see hot it gets.
Is it possible to run midrange speakers and and subwoofer at the same time sir? Please reply me soon.. I want to buy for my scooter.. Thank you.. Watching from manila Philippines
I am phone ilitterate...I didn't know you could subscribe without paying something. I have watched your videos for months now and am impressed. Actually drove to your old address and no one was there. Have heard from a lot of people sundown is the best. I had to have speakers and amps for myself. Please tell me if this set up will work. Sa 22s....v2 d4's and a sfb 5000d amp. Please reply
Tbh going from my Rockford bdcp 1500 to a sfb 2000 I can’t hear too much of a difference if any in sound quality and with more power now it’s noticeably louder
Dam how can I get one of them bass knobs with the clip light? My 3000 sfb I just bought didn’t even come with that. Really though I’ve been lookin for one if they work with the 3000sfb ?
I know it's not a Brazilian but it has the same application meaning enturnal parts.but y it take so much volts to get it's full potential (14.4) and Brazilian does rated at about 12.6 to 13 volts .note am not a really big fan of Brazilian but just saying.
These amps are doing a good bit OVER the rating at 14.4 or less...so what's the problem? Sounds like the same power to me, but Chinese made and not Brazilian..with Sundown levels of quality control. Brazil didnt invent the full bridge design, and Jacob isn't gonna let anything that's straight BS hit shelves with that Sundown logo on there. That would be suicide for the brand. I'm sure it took a ton of time and research and back and forth deliberating about even attempting a Sundown full bridge amp. So I would bet it's one of the best full bridge amps ever made.
Amps don’t come in “ohms”, the load is what you put to it with your subs. If you have two dual 2 ohm subs with the voice coils wired in a series, and then parallel the subs together that will be a 2 ohm load.
Anyone know this amp vs Skar SKV2 1500.1D ? What is the major difference? Skar also has the RP line which is supposed to be cheaper watts but also less sound quality
That’s not the camera. It’s some type of file corruption that most likely occurred in his editing software or during the render process onto the RUclips. Most likely during editing though.
I've been trying to figure out if I wired mine properly. I have an SA Rev3 10inch dual 2 (750rms) with an SFB-1500d. I wired the speaker (+ with +) & (- with -) but my amp clips with the gain being only 1/4 up. Honestly I feel as though I should get more power, am I right anyone?
At least they're discovering not everyone has a lot of disposable income
Just means you underrated your amp, it's a 2k amp being sold as a 1.5k. Awesome that you're giving the people more bang for their buck though, I support that. It's just a little easy being so conservative on your ratings and then acting all surprised when it does almost twice it's rated power.
Impressive efficiency @ 2 ohms. Close to the same output as the sfb 3k @ 4 ohms but the 1.5k pulled less current. Only about 80 watts difference. 1k was very efficient @2 ohms too. Digging these tiny amps. 👏👏👏
Yeah I saw the SFB3000D isn't very efficient at 4 ohms and that sucks as I own one and I'm using it at 4 ohms. Only running 2 JL 10w6v2 subs.
You should test the sound quality between this amp and a Korean board amp on a spectrum analyzer or RTA on a mic, use same power source and swap RCA's back and forth.. just a thought, I've always heard they sound different, I've always ran Korean amps myself but I'd run one or two of these on mids and highs (left & right)
I’m curious about the sq as well. It’s the only thing holding me back from getting one.
Tbh going from my Rockford bdcp 1500 to a sfb 2000 I can’t hear too much of a difference if any in sound quality and with more power now it’s noticeably louder
I THOUGHT IT WOULD HIT 2100 WATTS BUT IT SLAPPED 2200 WATTS AND FOR THAT IT HAS EARNED MUCH RESPECT. THAT IS A BAD ASS LITTLE AMP. THAT IS SWINGING IN THE HEAVY WEIGHT CLASS.
Finally, Sundown sells a product that's very affordable, and passes everyone's expectations.! Good job! May just have to sell my Soundigita evo 4k and get a sfb!
are u drink? soundigital just have between a evo 3k or 5k. doesn't have a evo 4k lol
Im loving this amp. The price is perfect for the deal.
Good power for the money. I'm definitely getting one. 2201 watts at 1ohm is great out of a 1500 rated power amp.
Only if you got a 15 volt system so it drops to 14.8. Most all cars and trucks run about 13.8 volts at best. Orion does almost twice the rated power at 12 volts.
Drop it 13.8 volts and see what it really does at regular car voltage. Bet it barely makes rated
I about figured that it would do 2000 easily. When i seen 2200, i knew it Derek. Thanks for sharing.
I may be mistaken, but I'm assuming the majority of people who are going to buy these amps are going to want to run them at 1 ohm for that power. I said it on your last amp test video and I'll say it again. It would be really nice to see the current draw at 1 ohm. Yes clearly pretty much everyone is going to need an upgraded electrical system to run this amp, but it would be good to see just how much current these amps draw at max power.
110 amps awesome. But now it is time to say WITH THIS AMP A PERSON HAS TO GET A HIGH OUTPUT ALT TO RUN JUST 1 OF THESE AMPS AT 1 OHM
Honestly anyone running over 1k watts on a stock alternator is pushing it.
@@djwonderbrad second battery?
What do they use capacitors for?
I'd be curious to see what power it makes with only one 1/0 wire on each input. That's a solid amp.
The same it did.
Bad ass, my brother has 2 sfb 8ks, on 4 x 12s and 40ah eh5 lithium we just got it all built and man it's bad ass💯🔥👍🏻✔
Damn those SFB amps are power houses!!! Can't wait to see the rest of the lineup. Definitely interested in the 4 channels as well.
I would love to see another SAZ-1500D type monster. You through a solid electrical system w/ 14.4v + power to it. At .5 nearly 3000w was very possible and can run them all day. Love mine on my custom x-12v2 dual 1ohm w/ red spiders in a 3 to 1 4th order. It freaken slams.
Wow these are awesome amps! Great price too. I will be getting that one and a 4 channel. I just gotta get them lol
just put one in my 2018 impala with 2 12's .... HUGE difference from what i had in there
U think it can handle 2 12s I got alpine type s 500 rms each sub
@@josesalazar8976 It should but I did have to replace it pushing it hard with the bass way too high... just make sure they adjust it right on the settings
Where's the Woofer Test Wednesday NightshadeV4 SPL test part 2??? We've been so patient...
Nice Amp for The Power to Price Ratio and I really like the 1/0 Hookups, it would need a Alt Upgrade and it would be worth it
I think that's awesome..89 percent efficient at 1400 watts...you can't beat that at the price..very nice guys,I think these amps are going to be your best sells to date....
my first system at 40.. showed the homies .. that tiny amp.. lol we talked ... big things come in small packs
Please do uncertified and dynamic runs on all the amps
Plz do the dynamic cuz ppl listen to 🎶 not test tones
When that 13K drops, I'll throw my MD 12K in the river
Robert Davidson sent it to me! 🥺
Nah bro you should show a disabled combat veteran some love and shoot that on over my way.
I hope the MD 12K is already sufficiently fried already then
It was a joke guys. A joke
@@robertdavidson548 lol
Awesome power from that little guy!!! Not surprised its sundown🤘🤘🤘🤘
Well the Orion xtr 1500.1d has met its competition...I would get this instead of the orion amp. This amp is also competing with the skar 2000.1d rp....hmmmm....I'm done window shopping now. Sundown got comp....🤙🏽💪🏽🤟🏼👏🏽
What's the max rca voltage input for these amps?
gonna put this on a sa 12 v2 sounds like it’ll match well.
I think it needs 2 fans one sucking air and one blowing air to get more efficient cooling across the board and I think you guys should look into maybe seeing if there is a manufacturer that would cut a hole through the board so you get a better airflow instead of just slapping it on the board cuz he would be a huge advantage to get air movement on both sides of the board that's just my thought then you guys should come out with a monoblock that is a cheap in a small as these cuz that's one of the only reasons I don't go for some of your bigger monoblocks is the price it seems like we're paying for a brand name and not sound quality anymore...... please don't turn into kicker......
shit slamms my gothic 12s in a kicker box lol... first got it for my alpine type R 15.. traded... still hits this amp is G,,,,
I have the SIA 1750D but cant find a dyno run on it.
i pay 289.99 on amazon, will this blow a sa-8 v.3 d2 ?
blow the top off
Love the amp why the bass knob blinking instead of staying lit the music shuts out the blue light blinking soon I turn the music down it suddenly comes back on
Will you run it at .5 ohm
Anyone run one of these recently? i've seen mixed reviews.
You think these amps will get hot easy for being small?
Can anyone confirm if those are 2 awg cables he has hooked up for the power and ground?
Also, what size fuse would you need to run this beast of an amp?
they are 1-0
On the RCA side which one do i plug in the red and white?
I'm curious about how the SFB-8000D.1 compares to the B2 audio Riot 7500D.1
I'd like to hear the difference between the full Bridge amps and the Korean amps
That is one of my main concerns as well...subwoofer sound quality vs that of a half bridge design. And also longevity of these vs Korean board.
If I wanted to get one to run some nice mids and tweets I would do it in a heartbeat...but I need clean, rich, deep bass.
I don't hear any difference from my JL 1000/1. I got the SFB 3000d to run at 4 ohms as the JL was just a large footprint. JL was ran at 4 ohms as well.
I want to see a dynamic test is there any Headroom or is it on the flat side??
He thinks dynamic test is stupid, so he doesn’t do it.
i have the SFB1000D and its NUTSSS
When are you going dyno the SAEv3?, I purchased a 2500 for black friday, I tested it next to the D4S JP23v2 and the SAEv3 seemed a little louder at same volume, was wondering if it's safe to run at half ohm?
I'm running my head unit lpf crossover where should I set lpf on amp 🤔 80hz to 20khz
What would happen if I run it with 4 gauge wire and 12 guage speaker wire
Hey man love the knowledge i have a question I wanna run the sfb8k and I have 2 American bass 18" hd1 subs will that amp work I know I could run 2 amps 1 per sub but will it work with one big amp
Drop it 13.8 volts and see what it does in real world car voltage. Not almost 15 volts.
That’s what I want to see also.
Is a 1 sundown 1500rms sub and 1500 watt amp to much power to run in my 06 mustang gt ?
How hot do they get if you’re using them for longer than 20min?
Are the muti-channel bridgable? Love the new line (salt).Thank you
Are thee auto on off like the sa600 ?
Msrp is $239 but Down4Sound has it at $299?
Imagine that
Great numbers on a little amp👍👍
What is the difference between these amps and your traditional amps you sale already, sorry noob question?
I'm starting to see a pattern with the SFB line. Are you guys naming them (1000, 1500, 3000, ect.) on the 2 ohm numbers? ;-)
Exactly, these amps are rated too low in my opinion. It's one thing if your amps do over rated, but reaching rated power at 2 ohms is just way too conservative imho.
Very curious to see how they hold up to long playing times.
So far so good on the 3k
So, Sundown is just going to sell a line of amps that don’t hold up to long play times?
@@ThisGuyDrives Wasn't an accusation. But I have several Crown amps for home audio. My ComTech 1610 will do over 1600 watts into 4 ohms, or 800 watts *2 into 8 ohms. It weighs 58 pounds and has 24 TO-3 style output transistors. It will also do this 24/7 not for 5 minute bursts. I get a little curious about amps that do the same power into ridiculous car audio loads but weigh a few pounds, have no thermal mass for heat dissipation and insanely tiny output transistors. It pulled over 100 Amps at 14.4 volts. Put that power into a light bulb or a metal bar and see hot it gets.
There’s only HPF, LPF, Gain and Level. Which one can you use as subsonic?
High pass filter
It would be nice if u got that fluke with the detachable display
What does it do uncertified at 1 ohm?
Will this slap two alpine type Rs ? Swr1242d
You sure that's not the 2K with the wrong stickers? 😂😂😂
I love seeing guys on Facebook claiming they running these at .5 all day long
What fuse do i need?
Beast
I have 2 12s alpine type s u thing it can handle it
I say 2200 @1ohm.... holy shit I was 1 watt off!!!
Is it possible to run midrange speakers and and subwoofer at the same time sir?
Please reply me soon..
I want to buy for my scooter..
Thank you..
Watching from manila Philippines
Is this rms watts
Test the 4 channel SFB200.4D ..?
I am phone ilitterate...I didn't know you could subscribe without paying something. I have watched your videos for months now and am impressed. Actually drove to your old address and no one was there. Have heard from a lot of people sundown is the best. I had to have speakers and amps for myself. Please tell me if this set up will work. Sa 22s....v2 d4's and a sfb 5000d amp. Please reply
Does anyone own this? Any thoughts on the sq side? Do these also sound as good as the others in the sundown stable?
Tbh going from my Rockford bdcp 1500 to a sfb 2000 I can’t hear too much of a difference if any in sound quality and with more power now it’s noticeably louder
U ever got it?
I got 81% still good
The money question is does this thing overheat or get hot????
From my research. It gets warm and not hot. Perfect for down south
That Taramps American style!
do you know how much the amplifier cost
Damn great numbers
Wait a minute so I can run my W7 on this amp?
@@vaughnrabbit yes
Can you please tell me what suprise me i have to get to possibly get one of them nightshades?
It would not be a suprise if they tell you which they will not do try again :D LOL
NS not happening.
Derek man rattle the web development team to update the web page we need info
We have someone working on it but it's been a slow process
@@UnofficialAudio thanks Derek I got two new sld 12s coming wanted to start building enclosures need some specs
I think it will do more than 1500watts
what is dynamic?
why do i clip with this amp then?? anyone know? if it can handle over 1500 at 1ohm why am i clipping
With so much power, is there going to be any issues of overheating?
No, since you have the headroom you shouldn’t have to push this amp to the limit.
Dam how can I get one of them bass knobs with the clip light? My 3000 sfb I just bought didn’t even come with that. Really though I’ve been lookin for one if they work with the 3000sfb ?
They all work as long as they are Sun down series. I got an extra bass knob for sale in case you interested. Sundown sent me extra one
My SFB 3000D didn't come with one either. Also it has the regular style rca inputs and only 1 speaker output.
I’m curious to see how much power it makes on 12v
Why would you run a amp on 12v?
@@Cap1215 powersupply most likely
I know it's not a Brazilian but it has the same application meaning enturnal parts.but y it take so much volts to get it's full potential (14.4) and Brazilian does rated at about 12.6 to 13 volts .note am not a really big fan of Brazilian but just saying.
The term you are looking for is topology. These amps are a full bridge topology. Theyre made in China.
Taramps is proof people will run any shit they can.
These amps are doing a good bit OVER the rating at 14.4 or less...so what's the problem? Sounds like the same power to me, but Chinese made and not Brazilian..with Sundown levels of quality control. Brazil didnt invent the full bridge design, and Jacob isn't gonna let anything that's straight BS hit shelves with that Sundown logo on there. That would be suicide for the brand. I'm sure it took a ton of time and research and back and forth deliberating about even attempting a Sundown full bridge amp. So I would bet it's one of the best full bridge amps ever made.
Does it come in 2 ohm
Amps don’t come in “ohms”, the load is what you put to it with your subs. If you have two dual 2 ohm subs with the voice coils wired in a series, and then parallel the subs together that will be a 2 ohm load.
Anyone know this amp vs Skar SKV2 1500.1D ? What is the major difference? Skar also has the RP line which is supposed to be cheaper watts but also less sound quality
The Skar RP amps get really warm. Really warm. They sound good tho.
Around whats going to b the price on the sfb 13k
I’m going with $1000.
It did 101w more than I thought it would do
Straight up a Skar 2k killer
Nice power
What's up with your camera?
That’s not the camera. It’s some type of file corruption that most likely occurred in his editing software or during the render process onto the RUclips. Most likely during editing though.
I've been trying to figure out if I wired mine properly. I have an SA Rev3 10inch dual 2 (750rms) with an SFB-1500d. I wired the speaker (+ with +) & (- with -) but my amp clips with the gain being only 1/4 up. Honestly I feel as though I should get more power, am I right anyone?
Somethings wired wrong!
Im having the same issue with this amp.
Will the knob with the clip light be available for the og sfb 3k for purchase
Wondering the same thing here man
I got an extra bass knob for these series amps for sale.
Hi i can use for one only subwoofers skar EVL 2500watt 1250rms 4oh
You can
Does anyone know the size fuse for the 1500
150 amp
These kids these days only know COMMON CORE , you better stick with your numbers Derrick 😂😂😂
That fan is in a bad place it need to be on the side to blow thru the amp not blow up towards the bottom plate those caps arent that big either
Lets go 2.1k from a 1500 my guess
Nice amp, what happen if power drop to 12.6v ? Will it burn or still ok? Thanks
It's still fine. 12-15 volts.
i have this amplifier and its been working great and then out of nowhere yesterday it went into protection mode, any solutions on how to fix this?