Super clip! Right on point about all that is necessary to figuring out what to do without all that claptrap that so many videos waste your time with. The tips at the end were especially helpful. Thank you!
My Kenmore gas oven made a click then popped the breaker. After that it won't heat up. I changed out the igniter but the new igniter won't light either. Any thoughts?
hi good afternoon... someone gave me a whirlpool gas stove . they told me the oven won't light so I changed the igniter and still won't light I changed the gas valve and still won't light.. can you help me please.what else should I do.
Thank you. You will need to test for power going to the igniter when you set it to bake, if you aren't getting power at the igniter check your wiring for damage, if the wiring is good then you will need to replace the control board.
I used my kenmore oven today. took the turkey out and then tried to light it for baking a pie and the igniter won't glow at all. Its a square igniter. Anybody tell me what I can check? Is it the igniter?
I have the same problem. I also Thad the problem 18 months ago or so. I replaced the igniter and it worked fine for 1.5 years, now it’s back to doing the same thing. A work around for me has been to put the oven on broil until the temp is 3-400 degrees and then switch to bake. It seems to light then. Also, after self cleaning the oven went back to working normally for a week or so.
Wow very professional and complete. Homeowner and exactly what I needed. Thanks for fixing it with me.
Glad we were able to assist you. If there is anything we can help you with in the future please let us know.
Great job. Far more information than other good vidios on this subject in the first 3 minutes! thank you
Super clip! Right on point about all that is necessary to figuring out what to do without all that claptrap that so many videos waste your time with. The tips at the end were especially helpful. Thank you!
You are welcome. If there is anything we can help you with in the future please let us know!
Great video covering each failure mode for a gas oven. Nice job and thank you.
Thank you! You are welcome! If you have any questions or need help with anything please let us know!
Thanks , excellent video
You're welcome!
I can't Thank you enough for this video! I promise to get my parts from you guys!
You're welcome!
Appreciate this content
You are very welcome!
Thank you Pro
You are welcome.
My Kenmore gas oven made a click then popped the breaker. After that it won't heat up. I changed out the igniter but the new igniter won't light either. Any thoughts?
How do I know if my gas valve regulator is on?
hi good afternoon... someone gave me a whirlpool gas stove . they told me the oven won't light so I changed the igniter and still won't light I changed the gas valve and still won't light.. can you help me please.what else should I do.
Did you figure it out?
The top cannot be lifted to clean
How to take off igniter on Kenmore stove
MANY different variations of kenmore stoves, but usually held in by 2 1/4" hex head screws under the removeable bottom inside oven.
I replaced the oven ignitor, it doesn't glow. The burners work and so does the broiler.
What is your model number?
@@appliancepartspros FGF366EBE
Thank you. You will need to test for power going to the igniter when you set it to bake, if you aren't getting power at the igniter check your wiring for damage, if the wiring is good then you will need to replace the control board.
@appliancepartspros I did an amp probe with one of the leads of the igniter and I had no amp draw .
You will need to test for power going to the igniter, you should have 120 volts when you set it to bake.
I used my kenmore oven today. took the turkey out and then tried to light it for baking a pie and the igniter won't glow at all. Its a square igniter. Anybody tell me what I can check? Is it the igniter?
most likely the igniter
Can a mouse cause damage
duhhhh
ive seen MANY cases wheras mice have chewed thru one of the wires to the igniter
Top burners work, broiler works, oven igniter glows well but won't start. I can smell gas so idk
Do you happen to have an amp meter that you can test the igniter? You could be having an issue with the ignitor or a issue with the safety valve.
I have the same problem. I also Thad the problem 18 months ago or so. I replaced the igniter and it worked fine for 1.5 years, now it’s back to doing the same thing. A work around for me has been to put the oven on broil until the temp is 3-400 degrees and then switch to bake. It seems to light then. Also, after self cleaning the oven went back to working normally for a week or so.
The broiler works but nut the oven
But nut 😂
Great video sir, thank you
You are welcome! If there is anything we can help you with in the future please let us know.