I followed this guy and my job turned out perfect,,i had water latex and i mixed 1 quart water to 3 quarts paint,,it was perfect,,the gun demo is perfect too, it only took me 1 time to set it up with this guy direction//thanks sir!!!
Thank you thank you thank you!! My new bought sprayer had a manual in German, so thanks for your clear and educational video. It is saved, and I will surely watch it again!❤
WELL... I know what I'm going to ask Santa for Christmas... I am in the middle of painting the outside of my house... STUCCO... and I have painted other Stucco houses, because I used "Flip" houses... but this Stucco house is the hardest one I have ever painted with a Roller... very Thick Stucco... I thought All Paint Sprayers were very expensive, so I didn't even try to LOOK up the price. I wouldn't care if the Paint Sprayer only lasted only this project... it would be worth it... Thank you for this great video
Thank You for taking your time to make this. I will be using this video for reference as I attempt to use my sprayer I have had for over a year and have yet to use. But now have a dining set and china hutch in need of paint.
Do you leave the paint in the sprayer between coats. If so how would you recommend being the maximum time. Also is this the same process for just primer
I noticed on mine where the trigger part screws and locks into the motor it doesn't sit flush and pushing the little tab back far enough to slide and click in makes the gasket screw in part at the motor to bow out, is this going to affect anything or should I return it?
No you don't always have to. It depends on the paint. You do want it to be a certain viscosity or the sprayer won't work correctly. So yes you always need to check the viscosity, if the paint is good then no you don't add thinner. If it's too thick then yes you add thinner.
Check your stain, it should have directions on the can. Depending on the sprayer you have you might not need to thin it at all. If it is an oil based stain you’ll need to thin it with mineral spirits. You also use mineral spirits to clean up after.
Mine is used, trying to spray water to see if it works, but water won’t spray, is it because it’s not paint? To thin? Or is it not working? Sounds loud also, as its trigger is pulled……help please?
@@nathanthreeleaf4534 I took mine completely apart and played around with it for an hour, and I was almost ready to give up when I had adjusted it all the way from one side of the adjustment all the way to the other then when I opened it up and looked it looked like to me in One Direction all the way would max out the motor which sends something up and down and activating the pump feature. However, it didn’t actually have anything to do with maxing out that adjustment in order to get the pump pumping with maximum first. What it was was a combination of adjusting it and leaving the gun open so you could see the motor was working and, fine-tuning the adjustment from max out then backing off to about 3/4 seem to be the sweet spot and give it a few seconds even though it sounds loud like it’s motor not working properly quite down significantly once it actually starts pumping liquid. It’s just a matter of getting itto start pumping
I purchased a Wagner Paint Sprayer and it only survived painting my 4 car garage once. The weight of the gun and with the paint in it will destroy your shoulders. Good luck trying to paint a ceiling with one of these, it's a nightmare. Avoid these POS Wagner paint guns at all costs.
This product will build your biceps it’s that heavy with the 1kg of paint attached !! It’s a lot easier with a brush and no cleaning the product afterwards as you can spend anther 20min cleaning the nuzzled ! I did not see any advantage of getting this having sold the item 2 weeks later on gumtree !!
Thanks Drew. I just purchased a Wagner Sprayer. I now feel more confident starting out. Appreciate your time.
Awesome, glad it was helpful. I like it so far. Have you had a chance to use it yet? What do you think?
At last, a video without horrible background music.
Excellent work
Thank you for the comment! I’m glad it was helpful.
I followed this guy and my job turned out perfect,,i had water latex and i mixed 1 quart water to 3 quarts paint,,it was perfect,,the gun demo is perfect too, it only took me 1 time to set it up with this guy direction//thanks sir!!!
I cannot thank you enough. Your video is precise, clear and easy to follow and you answered all of my questions. Thank you.
Thank you thank you thank you!! My new bought sprayer had a manual in German, so thanks for your clear and educational video. It is saved, and I will surely watch it again!❤
That's awesome! I'm glad this video helped you learn how to use your sprayer. Are you painting anything fun?
@@MyProjectWeekend I’m learning, but I’m gonna use it on some bed night stands. And I like to use it on some doors.
Thank you, very helpful for a first-timer user.
One recommendation. Use cold water when cleaning the gun. Warm or hot water will cause paint to thicken and make it harder to clean.
WELL... I know what I'm going to ask Santa for Christmas...
I am in the middle of painting the outside of my house... STUCCO... and I have painted other Stucco houses, because I used "Flip" houses... but this Stucco house is the hardest one I have ever painted with a Roller... very Thick Stucco...
I thought All Paint Sprayers were very expensive, so I didn't even try to LOOK up the price.
I wouldn't care if the Paint Sprayer only lasted only this project... it would be worth it...
Thank you for this great video
Perfect.....bro....thanks....i Buy new one....
Thank You for taking your time to make this. I will be using this video for reference as I attempt to use my sprayer I have had for over a year and have yet to use. But now have a dining set and china hutch in need of paint.
Wow that looks easy. Thanks for de-stressing my paint project for me!!!
It’s not bad at all! Good luck and happy painting. What kind of project are you working on?
Do you leave the paint in the sprayer between coats. If so how would you recommend being the maximum time. Also is this the same process for just primer
Good job I am getting one of those
Is discarding thinned paint back to the original can of unthinned paint a good idea?
In the directions it says to use a soft bristle brush for cleaning, is this necessary?
Gracias por tu video drew es de bastante ayuda amigo
¡De nada! Me alegra que te haya sido útil.
Awesome video. I wanna play this at my funeral
Windsheild washer fuild is great for thinng the paint
do you always need to thin the paint when using a sprayer? I'm about to use this same sprayer to paint my fence. Thanks
At 6:00 you say "So that's the vertical spray"
That was the vertical tip position causing a horizontal spray pattern, right???
How to set the spray patter for HVLP paint sprayer.
Yes that’s correct! I made a video as well in response to your comment. Thank you.
@@MyProjectWeekend Excellent video
I noticed on mine where the trigger part screws and locks into the motor it doesn't sit flush and pushing the little tab back far enough to slide and click in makes the gasket screw in part at the motor to bow out, is this going to affect anything or should I return it?
Do you always need to thin the paint when using a sprayer? I'm about to use this same sprayer to paint my fence. Thanks
No you don't always have to. It depends on the paint. You do want it to be a certain viscosity or the sprayer won't work correctly. So yes you always need to check the viscosity, if the paint is good then no you don't add thinner. If it's too thick then yes you add thinner.
Hi, what type of paint is the best to use to upcycle metal furniture please? Is waterbased a good choice? Thank you.
How do you know if you need to put water into the stain? I'm staining a privacy fence.
Check your stain, it should have directions on the can. Depending on the sprayer you have you might not need to thin it at all.
If it is an oil based stain you’ll need to thin it with mineral spirits. You also use mineral spirits to clean up after.
i like videos that are short and to the point when reviewing or testing a product
Where do you put the added grease
On the o ring between between the motor and the front section
How do you trun ot on to spray
It just plugs in. Once it’s plugged in as soon as you pull the trigger it will start to spray. There’s no extra on off switch on the sprayer.
Thank you 🙏🏾
Have you found a place to find additional fluid cups? I can't find them anywhere!
Harbor freight has them different brand
👍🏾🍷Thanks 4 sharing my brotha
Exactly what I was looking for thank you
You’re welcome! I’m happy to hear it was helpful.
Do you have to thin the paint?
Yes it needs to be thinned. You can find the time stamp in the description of the video. It’s around the 3:00 minute mark.
Thank you
Why does your gun make that noise?
Mine is loud also
Mine is used, trying to spray water to see if it works, but water won’t spray, is it because it’s not paint? To thin? Or is it not working? Sounds loud also, as its trigger is pulled……help please?
I'm having the same problem. I don't see any liquid getting pulled up from the reservoir. I'm wondering if the pump has gone out.
@@nathanthreeleaf4534 I took mine completely apart and played around with it for an hour, and I was almost ready to give up when I had adjusted it all the way from one side of the adjustment all the way to the other then when I opened it up and looked it looked like to me in One Direction all the way would max out the motor which sends something up and down and activating the pump feature. However, it didn’t actually have anything to do with maxing out that adjustment in order to get the pump pumping with maximum first. What it was was a combination of adjusting it and leaving the gun open so you could see the motor was working and, fine-tuning the adjustment from max out then backing off to about 3/4 seem to be the sweet spot and give it a few seconds even though it sounds loud like it’s motor not working properly quite down significantly once it actually starts pumping liquid. It’s just a matter of getting itto start pumping
I purchased a Wagner Paint Sprayer and it only survived painting my 4 car garage once. The weight of the gun and with the paint in it will destroy your shoulders. Good luck trying to paint a ceiling with one of these, it's a nightmare. Avoid these POS Wagner paint guns at all costs.
Sounds like you just need to hit the gym
I’ve had the sprayer for several years now never any issues just keep it clean
This product will build your biceps it’s that heavy with the 1kg of paint attached !! It’s a lot easier with a brush and no cleaning the product afterwards as you can spend anther 20min cleaning the nuzzled ! I did not see any advantage of getting this having sold the item 2 weeks later on gumtree !!
Yeah, it's not heavy at all 😅
😂😂😂