Toyota 4Runner TRD PRO Yotaleds.com 4pcs LED Grille Lights (2014-2021) “Raptor Lights” install.
HTML-код
- Опубликовано: 20 окт 2024
- Install video on the Toyota 4Runner TRD PRO Yotaleds.com 4pcs LED Grille Lights (2014-2021) “Raptor Lights” install on a 2021 Toyota 4Runner TRD Pro.
This video gives you a very quick overview of how to install your Toyota 4Runner TRD PRO Yotaleds.com 4pcs LED Grille Lights (2014-2021) “Raptor Lights”. The video shows wire routing, fuse tap points, how to get the lights installed properly into the grill, how to secure the wiring harness, and how to remove/reinstall the pushpins that secure the cover above the radiator.
Very high quality product. Installs very quickly.
Product quality: 8/10
Difficulty of installation: 2/10
Tools required:
10mm socket and ratchet or a 10mm wrench.
Small flat blade screwdriver or a flat blade plastic pick.
Zip ties or Cable ties.
This is single handedly the GREATEST TOOL I have ever used:
amzn.to/3O3sxR6
Great video. No need to crimp anything? I have a 2023 TRD Pro and I need to check if i have a notch in the fusebox. I just ordered the same kit. Yota states "For 2020+ models, if the INJ fuse is located in the elevated row of the fuse box, you'll need to use another fuse location for installation to be able to close the fuse box lid. Please use the 10amp headlight low beam in this case."
Still good with using the light fuse? No check engine lights?
You made it look so simple, I like the fact you can turn it on with the headlights.
I can’t find another video where they used that particular fuse.
Thank you
No issues at all. Works great! Amazing what can be done with a multi-meter and a little bit of time.
Haha.
@@themanleygarage done! Works great! The slot where you routed the wire was super tight on mine, just to the right of that, on the other side of the hot lead I drilled a hole so tiny, the wire shielding it’s like a seal and it’s right below the cover line which the cover it self has a seal, so I’m pretty sure it’s water tight!
Thank you 🙏
Nice video of grille light installation! Are you still happy with everything 7 months later? Also, did you have to notch your fuse box for the red power wire or was that notch already there. Thanks!
Very happy with it.
They look great!
Fuse box did not need to be notched.
Raptor is a Ford. I won't degrade my TRD ORP. Not necessary IMO.
They’re just lights… They look cool… the end…
OK...I get it!@@themanleygarage