hey Justin on your clutch pedal you may want to check the bushing on the pivot where the clutch pedal mounts to the body of the truck i have heard that noise before and that is what it was just trying to help
I was going to type the same thing. A spring won't "typically" make any noise itself. The part that the spring connects to (each end) may make some noise when it vibrates while moving but it would just be from the very minimal movement where the metal touches the point that the spring connects to. This noise is a bushing. More than likely a plastic one. If he can reach it, he may be able to get it lubricated but more than likely, it needs to be replaced. On a side note Justin, I would suggest not wasting your money on over priced WD-40 in the future and use something better. Liquid Wrench provides better results. Most people don't realize that WD-40 is meant more as a water displacement than something to unseize nuts and bolts or for lubrication. WD-40 is just the most popular product unfortunately but that doesn't mean it is actually "better". Now, in fairness, if you need to use it to remove moisture from inside a distributor cap, then WD-40 would be the thing to use. But otherwise, I would choose some Liquid Wrench. Project Farm on RUclips did a comparison of various lubricants or penetrants and you should check out his channel if you haven't already. He does a lot of great comparisons of many types of products. ruclips.net/video/xUEob2oAKVs/видео.html
It’s been my experience with clutches that it’s a bushing in the pedal assembly creaking like that. Using a white lithium grease at the pivot point of the pedal (not just the spring) should help a little more. Long term solution would be to see if those bushings are serviceable. Just an idea, brainstorming…
any spay lub will work for finding your squeak. any rod end or pivot that gets dust or trash will dry out a joint. sounds like yours is in the cab or going through the cab. squirt each joint with engine off through the hole clutch linkage. once you find it clean it up with some spray lube then grease. spray lithium is easiest.
I Ubered a little while early this morning and found myself in your neck of the woods from the Inman / Spartanburg area. Dropping people at work and just dominoed out there.
I almost bumped into you some time ago at a Loves. As we figured things out and began to part ways you told me have a good morning. You know it didn't make a lick of difference for my crap luck that day but I was in a good mood through it all. I had hoped to see you again to shake your hand and say thank you but I have since moved to the west coast. Now I find your channel so I can at least say thank you for that, and mention that you have a beautiful truck that always caught my eye as I was passing by. Hopefully some day life will be weird again and I can still shake your hand. My man, it looks hard right now and it probably will get worse, but there's always a sunrise after the dark. Hang in there and have a Good Morning!
Mouser part number 691-LRA511-RS-B/012V should work. (slight different style but electrically and physically the same) so should drop in. Check measurement of "Panel Cutout" to be Shure. If its wrong let me know what it is I can find and equivalents.
Thank you so much the pins on the back down have the same connection angles but I did find a switch non illuminated on eBay from HD switch praying it will work 😎🙏🏽
My Aunt lived in Cape Canaveral and Cocoa Beach for the Summers with Our Aunt and Uncle that was very high up in the Military. My Uncle Bill when he left in the Morning to Go to Nasa which I have no clue what he did, but the Guy had a Chest full a Service Pins and Acominations. That was 45 Years ago but we had a few very cool Person Tours. He Retired 25 Years ago, He was a Awesome Dude with nonNonsense.
Did you find your switch you can use any of that number switch that has a lighted switch 3 prong the 2 gold are power when you turn it on the red led lights up
it was common for a while- you have a split LED Toggle switch..lol.. from the look of it.. but since the circuit is AC, I believe, you could put in a double pole house switch- otherwise use a lit double pole toggle switch..
Justin, I was just at Green APU last week talking to Greg. He gave me a tour of the new facility and race shop and he said they would like for you to come in again for a new video of the new facility. Its very impressive!! Maybe hit him up.
Justin...I'm gonna be praying 🙏 a lil longer for you tonight. I can feel the frustration in your voice. What the Heck is going on with this Great Nation 🤨😢😪? It's a mess out there...everywhere. Hang in there, HE is Listening 💫🙌🫶. God bless you and have a gnite 🙂.
And I know you don’t like refrigerated trailers, but I used to run a reefer out of Florida and Texas up to New York City for many years and I always had a load out and you live in a very good spot to get loads back out of Florida with a refrigerated trailer, but might be worth thinking about OK. Enjoy your trip back.
Good morning JustTruckin Family, Justin it is sad that broker's make more than the drivers it has been cool hanging out with you today the video was awesome keep your head up and faith in the lord and all will be okay.T's&P's to you and all other driver's thanks for keeping the shelfs stocked with what we need at home
I have said this all along The Brokers are Breaking the Owner Operator Business. Anytime there are Too many hand in the Pot Someone is going to draw out what’s left but yet that person is doing everything, Meanwhile Those Con Artists of So called Brokers.
Hopefully you’ll get loaded early and be able to get back to the family sooner I’m hoping for you anyway!!!! Have a great trip home and enjoy the weekend and I’ll see you in the next one!!! Oh and awesome drone footage!!!
sounds like all that spraying you did finally found it's way to the trouble spot. don't be surprised it starts doin it again. i had a Jeep that had that problem. i would oil it and sooner or later it would start again. drove me crazy.
Seven Eleven Has Bought all the Speedway Gas and Fuel Stations. American Owned Company although Speedway Station are quite a bit higher then most. But I try my best to use the same Fuel Stations and it works unless I am out of Town Job Walk Through for Perspective Contractors Job. The Company has Transformed from a All Fazes of Building of Commercial Business’s. We have transformed into a Excavation and Concrete Company. We are Setting up a Office in Knoxville,Tennessee to be Managed buy my Close very Solid Individual.
Buddy my wife and were at Costco Yesterday, I look up there is the DJI Mavic Mini Drone. I fell in love but I didn’t buy it because it was $500 bucks so I figured I would see if I can get it cheaper but so far not. So maybe Costco here I come.
Might try a Teflon spray lubricant. That or a white grease spray. Did you spray the bushings? Those will rub against end washers or sometimes the rod that goes through it. Don’t use silicon.
I wouldnt even dream of just running to cover my fuel costs, i no it helps out alot, but ì evreybody í doing that, the rates will never go back, as evrey other driver, will be running north to south trying to get home,, tell the.brokers to stick it were the.sun dosnt shine, deadhead home, before running just for fuel...😊😊😊
@@JustTruckin that is great to hear…cause i have had it with trying to get appts for service for carrier or TK. Plus my unit has over 9,000 hours and starting to see coolant and oil leakage. Thanks again for your time.
The Gold standard means nothing. It has nearly zero intrinsic value. It's a commodity just like wheat or grain. Money has only ever been worth what people think it's worth. Every transaction is how much do I believe that this money, in whatever currency, will provide to me the value I expect. It's all trust in a system. In the past the idea that gold backed the currency was meant to increase trust in the economy. Don't go down the rabbit hole of the gold standard.
Your clutch squeaking is the bushing on the clutch rod that comes up through the floor put some wd 40 on the connections on it get outside raise hood and look back under drivers side of cab you will see it
Justin, I am happy you got a load going to Florida and you got a load going home near your house I hope the buyers stop being idiots and understand that you guys got bills to pay to you got a pay for gas you got a pay for maintenance on your truck in the closet money you work hard for your family your wife and your three sons I like how you explain everything while you’re driving to all of us and all the drivers out there and you’re right you had to find a place where you could save gas money because gas prices are going up even to fill up a car today is cost to $70 $80 the economy is in the pooper. Good night have some nice sleep. I can’t wait to see your video tomorrow. Can’t wait to see you when you get home you give T dubs a hug and kiss and your three boys a hug and kisses drive safe away because there are a lot of crazy people out there and I can’t drive. Have a good night. Can’t wait to see you next video.
Dispatchers got a load going to Chicago and Jesse wrote my load. Cause he loves gong to Chicago. Cause of the famous Pizza's and Hoagie's there and of course the famous bar we love to go. I am gong so is Nana. She was like he better take us. And Jesse was like sorry Nana and she was like ha ha liar and Jesse snickered. We can drop off the load anytime before monday evening. And we are going to head out either late tonight or early in the morning. Nana already has her bag packed and right beside the door. And Jesse said leaving tonight since it's cooler and he likes to drive with the window's open.
J’ you know I said it before I really think something’s up with these load boards, you know it’s like AI or the Algorithms they set up to run these boards it’s like a you said it’s these games these brokers play’ only who your really negotiating with their system they set up, your negotiating with computers not live people. I don’t know but, I do understand about those world events you were talking about and you can sum it all up to POLITICAL CORRUPTION, alright J’ that’s my rant 😂.
Yes some of that but mostly the live people are the ones who pull it down then put it up There has been too many trucks and now we might be getting a little equal ratio which leads to negotiations 😎🙏🏽
Your clutch noise sounds like a plastic pivot grommet that’s dried out. Oil or WD40 might fix it temporarily, but probably not permanently, unfortunately.
I like watching your vids, but really, it's getting a bit old hearing the same stuff about brokers lol. On another note you should of stayed for the Daytona night race
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
hey Justin on your clutch pedal you may want to check the bushing on the pivot where the clutch pedal mounts to the body of the truck i have heard that noise before and that is what it was just trying to help
Thank you so much that was it
I was going to type the same thing. A spring won't "typically" make any noise itself. The part that the spring connects to (each end) may make some noise when it vibrates while moving but it would just be from the very minimal movement where the metal touches the point that the spring connects to.
This noise is a bushing. More than likely a plastic one. If he can reach it, he may be able to get it lubricated but more than likely, it needs to be replaced.
On a side note Justin, I would suggest not wasting your money on over priced WD-40 in the future and use something better. Liquid Wrench provides better results. Most people don't realize that WD-40 is meant more as a water displacement than something to unseize nuts and bolts or for lubrication.
WD-40 is just the most popular product unfortunately but that doesn't mean it is actually "better". Now, in fairness, if you need to use it to remove moisture from inside a distributor cap, then WD-40 would be the thing to use. But otherwise, I would choose some Liquid Wrench.
Project Farm on RUclips did a comparison of various lubricants or penetrants and you should check out his channel if you haven't already. He does a lot of great comparisons of many types of products.
ruclips.net/video/xUEob2oAKVs/видео.html
Justin are you able go set up a mic closer when your in the truck moving? Hard to understand your speaking over the truc k....just saying
It’s been my experience with clutches that it’s a bushing in the pedal assembly creaking like that. Using a white lithium grease at the pivot point of the pedal (not just the spring) should help a little more. Long term solution would be to see if those bushings are serviceable. Just an idea, brainstorming…
Thank you 😎🙏🏽
Good to see ya trying to make the spot market work for you. Have faith stay strong, "Save the Signs"😂😂😂
Save the SIGNS 😑🙏🏽😂
Thank you sir con another excellent video!! I never see you mad!!
It’s all editing 😎🙏🏽 everyone is human
Why dont you park the W900 and haul cement with the FLD until things straighten out. Be home every nite and save on fuel money
any spay lub will work for finding your squeak. any rod end or pivot that gets dust or trash will dry out a joint. sounds like yours is in the cab or going through the cab. squirt each joint with engine off through the hole clutch linkage. once you find it clean it up with some spray lube then grease. spray lithium is easiest.
Love the longer video bub! Roll easy...
I’m done with brokers…. Never looking back.
😎🙏🏽
Love your rant on the economy 🤙🏾🤙🏾🤙🏾 churr from New Zealand bro.
One an a half to two inches of free play on clutch pedal
Back to trucking that makes the world go around
Another awesome video Justin beautiful drone footage an a georgous sunset thank you for letting us ride along my friend always enjoyable
Glad you enjoyed it 😎🙏🏽
Great video. Glad that you, caught a load back. Safe travels brother
Thank you Rail and those bumpers are still doing great 😎♥️🙏🏽
hey I just heard Convoy is looking for buyers they're about to go under. So be careful if you book any Convoy loads.
Really 😯🤔
Really good podcast! Thank you for sharing the real deal!
Glad you enjoyed it! 😎🙏🏽
Dang you were in my neck of the woods. I work about 1/2 mile from this. Be blessed!
"I might break even" - Everyone in Trucking 2023.
we ain't pulling freight for free around here this aint a charity. Know your worth!
I Ubered a little while early this morning and found myself in your neck of the woods from the Inman / Spartanburg area. Dropping people at work and just dominoed out there.
Welcome to Simpsonville 😉🙏🏽
I lived in the Cocoa Beach area (Melbourne) for ten years. Fun area
Very cool!
IT has been a while sense i checked in you look tired take a break no youtube no beach no motorcycle no uber GOT IT.
I almost bumped into you some time ago at a Loves. As we figured things out and began to part ways you told me have a good morning. You know it didn't make a lick of difference for my crap luck that day but I was in a good mood through it all. I had hoped to see you again to shake your hand and say thank you but I have since moved to the west coast. Now I find your channel so I can at least say thank you for that, and mention that you have a beautiful truck that always caught my eye as I was passing by. Hopefully some day life will be weird again and I can still shake your hand. My man, it looks hard right now and it probably will get worse, but there's always a sunrise after the dark. Hang in there and have a Good Morning!
That’s so Awesome man I hope you Have a Great weekend and Say Hi to the West coast for me 😎🙏🏽 God Bless and I’d love to shake your hand someday 🤝🏽
Mouser part number 691-LRA511-RS-B/012V should work. (slight different style but electrically and physically the same) so should drop in. Check measurement of "Panel Cutout" to be Shure. If its wrong let me know what it is I can find and equivalents.
Thank you so much the pins on the back down have the same connection angles but I did find a switch non illuminated on eBay from HD switch praying it will work 😎🙏🏽
I believe there is a grease fitting down behind the four gauges on your left
I typed in 1049r mexico 12 volt switch, on Google see all kinds of those.
Welcome back to FLA!
Hot 🥵
When you pulled in the walmarts and found those extra long parking spots would you consider that those parking spots were for big trucking trailers.
I think they are made for RVs, but big trucks use them
My Aunt lived in Cape Canaveral and Cocoa Beach for the Summers with Our Aunt and Uncle that was very high up in the Military. My Uncle Bill when he left in the Morning to Go to Nasa which I have no clue what he did, but the Guy had a Chest full a Service Pins and Acominations. That was 45 Years ago but we had a few very cool Person Tours. He Retired 25 Years ago, He was a Awesome Dude with nonNonsense.
That’s beautiful thank you for the story and his Service 😎🙏🏽
Did you find your switch you can use any of that number switch that has a lighted switch 3 prong the 2 gold are power when you turn it on the red led lights up
Thank you Joe
go find a chrome shop or speed shop with the electricals in my day we would go to radioshack.. lol just show the whole switch to them..
Looked before but just toggles ususall for older trucks 🤔🙏🏽
it was common for a while- you have a split LED Toggle switch..lol.. from the look of it.. but since the circuit is AC, I believe, you could put in a double pole house switch- otherwise use a lit double pole toggle switch..
I'm starting to get in now, just picked up an f endorsement, next paycheck I'll go for next level.
Amen Brother.
The squeak sounds coming from the end of the clutch were it is mounted
Isn't a trailer park on water a water park ?
Justin, I was just at Green APU last week talking to Greg. He gave me a tour of the new facility and race shop and he said they would like for you to come in again for a new video of the new facility. Its very impressive!! Maybe hit him up.
Justin, the coke zero 400 is tonight they always do the regular season finale before the playoffs on Saturday
Nice thank you Bud
I Like the longer Vid
Justin...I'm gonna be praying 🙏 a lil longer for you tonight. I can feel the frustration in your voice. What the Heck is going on with this Great Nation 🤨😢😪? It's a mess out there...everywhere. Hang in there, HE is Listening 💫🙌🫶. God bless you and have a gnite 🙂.
God Bless and thank you Graci 😎🙏🏽
I run split berth ever night I’m working. I do a 3 1/2 hour layover in Atlanta waiting on outbound mail.
There ya go 😎🙏🏽
Cool “rooted” T! My wife and I did a rooted study group from our church…. Did y’all do one?
Stay safe and keep cool out there!
Cheers
Doc
SOME OF THE PLACES DON'T SHOW UP ON GPS,OR THE MAPS. THERE'S A PLACE I THINK IN NORTHERN JACKSONVILLE/GEORGIA,IT WAS A NEW TOWN.
And I know you don’t like refrigerated trailers, but I used to run a reefer out of Florida and Texas up to New York City for many years and I always had a load out and you live in a very good spot to get loads back out of Florida with a refrigerated trailer, but might be worth thinking about OK. Enjoy your trip back.
Good morning JustTruckin Family, Justin it is sad that broker's make more than the drivers it has been cool hanging out with you today the video was awesome keep your head up and faith in the lord and all will be okay.T's&P's to you and all other driver's thanks for keeping the shelfs stocked with what we need at home
Appreciated Tommy 😎🙏🏽
3&1 Oil garage door lube works better as its oil based instead of water based I would think anyway
Prayers 🙏 for yall brother take care be safe
Thank you Edward God Bless you
Justin switches like yours are readily available on amazon.
I have said this all along The Brokers are Breaking the Owner Operator Business. Anytime there are Too many hand in the Pot Someone is going to draw out what’s left but yet that person is doing everything, Meanwhile Those Con Artists of So called Brokers.
Very True in this business
Hopefully you’ll get loaded early and be able to get back to the family sooner I’m hoping for you anyway!!!! Have a great trip home and enjoy the weekend and I’ll see you in the next one!!! Oh and awesome drone footage!!!
Thank you Henry
sounds like all that spraying you did finally found it's way to the trouble spot. don't be surprised it starts doin it again. i had a Jeep that had that problem. i would oil it and sooner or later it would start again. drove me crazy.
😑🙏🏽
Seven Eleven Has Bought all the Speedway Gas and Fuel Stations. American Owned Company although Speedway Station are quite a bit higher then most. But I try my best to use the same Fuel Stations and it works unless I am out of Town Job Walk Through for Perspective Contractors Job. The Company has Transformed from a All Fazes of Building of Commercial Business’s. We have transformed into a Excavation and Concrete Company. We are Setting up a Office in Knoxville,Tennessee to be Managed buy my Close very Solid Individual.
Great info 😎🙏🏽🤘🏽
Use kryol oil in spray can .10 times better then wd-40.
Good hot morning yall.
Hey Justin 23 I am pretty sure that Lowes carries that switch in the electrical department just to make sure the latest 12 V if that’s what you need
Keep up good work.... 👍
Mate, every time you drop that clutch, I'm sorry but, I'm laughing!!!
😂😂😂
Maybe your clutch is going out? My car was squeaking just like that and turned out my seals were leaking by.
Maybe 🤔
IT's called a rocker switch. You should be able to find at an AUTO parts store
Buddy my wife and were at Costco Yesterday, I look up there is the DJI Mavic Mini Drone. I fell in love but I didn’t buy it because it was $500 bucks so I figured I would see if I can get it cheaper but so far not. So maybe Costco here I come.
You’ll love it 😍
Under the hood by the firewall
It is Saturday race brother its a night right u were right
Your T-shirt has a different meaning in Australia 😅
If you use just the two wires y the light
Might try a Teflon spray lubricant. That or a white grease spray. Did you spray the bushings? Those will rub against end washers or sometimes the rod that goes through it. Don’t use silicon.
Thank you I think I need to spray form engine bay 😎🙏🏽
your clutch is killing me lol
And Not softly either 😂. He tried fixing it. He'll get it taken care of...I imagine it's worse for him in the cab than Us who can hit "Mute". 😮😁
Fixed 😎🙏🏽
it sounds more like a plastic bushing than a spring
Carling is a pretty common switch. Check Grainger.
E-9000 is strong glue. could help you. be careful with it. but it is strong af!
He said it’s two guys in there he getting trained or something 😂😂😂😂😂
Try white lithium grease on that pedal
I wouldnt even dream of just running to cover my fuel costs, i no it helps out alot, but ì evreybody í doing that, the rates will never go back, as evrey other driver, will be running north to south trying to get home,, tell the.brokers to stick it were the.sun dosnt shine, deadhead home, before running just for fuel...😊😊😊
Not possible in todays market 😞🙏🏽
IT's not the spring its a rub. Something is Rubbing the swing arm.
look under the fire wall
That was it 😎🙏🏽
delmiller is right do not let that noise go to long
That's that CALI in you keep calling out circle k come on home brethren 😁😁
Lol 😂
Wd 40 will dry up use lube
be careful where you fly your drone FAA is cracking down.😃😃😃😃😃
Luckily DJI has built in software that will not allow you into unsafe airspace 😎🙏🏽
Hi Justin
Hey Eddie
Justin with all due respect, the 26th is Saturday
🤣😂😊. Yep.
@@gracielarojas3200😮
Lol 😂 😎🙏🏽
🚛 ❤️ ✌️ 🌴
What’s up J’❤.
Hey Now 😎🙏🏽
@@JustTruckin 🙏🇺🇸🙏🫵
Maybe you can moonlight as a broker for a while and get the inside biz down? Then drivectruck and be your own broker when its more lucrative?
Like the shirt Justin
😎🙏🏽
where can i get a size 5XLT just like that shirt in red and another one in green or grey
no geese...hummm
I was curious your experience with green Apu has been? Have you had any downtime?, I seem to get mixed reviews….
Zero down time almost two years
@@JustTruckin that is great to hear…cause i have had it with trying to get appts for service for carrier or TK. Plus my unit has over 9,000 hours and starting to see coolant and oil leakage. Thanks again for your time.
Left Landstar for this reason.
Subway was just bought by the same company that owns Dunkin Dounuts.
Really 🤔
Wanna hear the most annoying sound in the world?😂 your clutch🤣
😂😂😂
Hello 👋
Hello 👋 Michael 🏆🤘🏽
@@JustTruckin I like that KW key chain lol👍
The Gold standard means nothing. It has nearly zero intrinsic value. It's a commodity just like wheat or grain. Money has only ever been worth what people think it's worth. Every transaction is how much do I believe that this money, in whatever currency, will provide to me the value I expect. It's all trust in a system. In the past the idea that gold backed the currency was meant to increase trust in the economy. Don't go down the rabbit hole of the gold standard.
Very true
Go and get your own brokers license and start knocking on doors
Your clutch squeaking is the bushing on the clutch rod that comes up through the floor put some wd 40 on the connections on it get outside raise hood and look back under drivers side of cab you will see it
Thank you
Makes sense because at exit one I sprayed down the motor to get some dust off and that’s when it stopped for a little 😎🙏🏽
Yep those bushings are bad about that I would get some white lithium grease in the spray can and spray that on them it might help for a little bit
Justin, I am happy you got a load going to Florida and you got a load going home near your house I hope the buyers stop being idiots and understand that you guys got bills to pay to you got a pay for gas you got a pay for maintenance on your truck in the closet money you work hard for your family your wife and your three sons I like how you explain everything while you’re driving to all of us and all the drivers out there and you’re right you had to find a place where you could save gas money because gas prices are going up even to fill up a car today is cost to $70 $80 the economy is in the pooper. Good night have some nice sleep. I can’t wait to see your video tomorrow. Can’t wait to see you when you get home you give T dubs a hug and kiss and your three boys a hug and kisses drive safe away because there are a lot of crazy people out there and I can’t drive. Have a good night. Can’t wait to see you next video.
Appreciated Robert thank you for always being here with us 😎🙏🏽
Dispatchers got a load going to Chicago and Jesse wrote my load. Cause he loves gong to Chicago. Cause of the famous Pizza's and Hoagie's there and of course the famous bar we love to go. I am gong so is Nana. She was like he better take us. And Jesse was like sorry Nana and she was like ha ha liar and Jesse snickered. We can drop off the load anytime before monday evening. And we are going to head out either late tonight or early in the morning. Nana already has her bag packed and right beside the door. And Jesse said leaving tonight since it's cooler and he likes to drive with the window's open.
👍🏿👍🏿👍🏿👍🏿
😎🙏🏽
J’ you know I said it before I really think something’s up with these load boards, you know it’s like AI or the Algorithms they set up to run these boards it’s like a you said it’s these games these brokers play’ only who your really negotiating with their system they set up, your negotiating with computers not live people.
I don’t know but, I do understand about those world events you were talking about and you can sum it all up to POLITICAL CORRUPTION, alright J’ that’s my rant 😂.
Yes some of that but mostly the live people are the ones who pull it down then put it up
There has been too many trucks and now we might be getting a little equal ratio which leads to negotiations 😎🙏🏽
Hey Justin and idea for you if you make it up into Georgia go by and see Allison maybe she might be able to help you with your little squeak
Great idea
@@JustTruckin good luck on finding good loads
Your clutch noise sounds like a plastic pivot grommet that’s dried out. Oil or WD40 might fix it temporarily, but probably not permanently, unfortunately.
Broker your own loads stop paying the brokers to do nothing but steal your money
Harder done than said 😑🙏🏽
I like watching your vids, but really, it's getting a bit old hearing the same stuff about brokers lol. On another note you should of stayed for the Daytona night race
Wish I could have
Dude, you GOTTA fix the squeak. ha ha It's annoying ain't it?