3.5 Inch Freestyle FPV Drone - How To PICK PARTS and BUILD IT! Step By Step - Part 1
HTML-код
- Опубликовано: 22 авг 2023
- This video is a beginner's guide to choosing FPV Drone parts for a custom build. In this video, we walk through choosing the parts, why we chose the parts, and the process of assembly and soldering the electronic components of the drone. This is a 3.5 inch Freestyle FPV Drone.
PARTS
➡️ Grinderino 3.5" Frame - volaertus.com/shop/frames/bot...
➡️ VIFLY Short Saver 2 (Smoke Stopper) - volaertus.com/shop/accessorie...
➡️ BETAFPV F722 35A AIO - volaertus.com/shop/aio/betafp...
➡️ T-Motor Pacer 1804 2400KV 1.5MM Shaft Motors - volaertus.com/shop/motors/t-m...
➡️ VIFLY Finder 2 - volaertus.com/shop/accessorie...
➡️ HDZero Race V3 VTX - volaertus.com/shop/vtx/hdzero...
➡️ HDZERO MIPI Cable 80mm - volaertus.com/shop/accessorie...
➡️ HDZERO Micro V2 Camera - volaertus.com/shop/cameras/hd...
➡️ RADIOMASTER - RP2 V2 ExpressLRS 2.4ghz Nano Receiver - volaertus.com/shop/receivers/...
➡️ TRUERC OCP 5.8 U.FL SHORT RHCP - volaertus.com/shop/antennas/o...
#howto #build #fpvdrone - Хобби
Save BIG At volaertus.com/
great content dude. Keep it going!
Thanks for the support! Lots more to come now that we fixed our storage issues 🙂
You are showing us how it goes when we build a drone, some of the changes we have to make very good job .
Yeah once you learn about the parts the hard part of figuring out how to make it all fit never ends haha. If only people united to standardize things a bit but I don't see that happening anytime soon
The motors aren't listed wrong on the site, you measured differently than the schematics. It's 9mm diagonal, but if you measure 2 on the same side you get 6.3mm. Similarly a 12mm diagonal will give you ~8.5mm and a bit more if you aren't centered in the holes if you measure along the side instead of across.
Wow great catch! I'm going to update all our product pages with better photos and info because beginners will be super lost with what my (and other) shop provides currently. Thanks for the feedback
This is Real!
Great video showcasing the bumps you can run into but not the end of the world, I messed up buying a stack that couldn’t fit with my air unit on my whoop (stacked together) so it ended up shortening itself 😅
I run the 2850 kv on 6s.. aos3.5 thing absolutely rips.. I have a mamba720 aio though. It’s 45 watt. I’ve blown it to shit on concrete several times. I’m running DJi 03 though. Waiting on a new frame to come in.
I'm building a Flyfish 3.5 with 1505@3700kv motors, hopefully they are big enough and hopefully it's under 250g.
Great video, will be very usefull. Thnaks
This frame is really popular right now from what I've seen. Make a video and send the link, would love to check out your build
@@volaertus never did an fpv video outside of uploading DVR, but I think I'll try. Thanks for your response!
Of course! Looking forward to seeing it@@miquelmarti6537
Fuck the faa who cares if it’s over. How often do you even see anyone flying.
Great video, I hope you remembered to solder the other leg of the cap.....
Hahahaha
I'm quite sure you can use the whoop vtx on 4S builds. All tiny trainers are built this way.
I will correct myself. Whoop Lite VTX is 1-3S and the discontinued Whoop VTX was 2-6S.
I wish we could use a whoop vtx with up to 6s!! Imagine the beast it would birth
I fly 6s on 4s motors with a throttle limit of 66 so I can switch between the two.
I heard about this and 4s or 6s auto detect. Need to learn how to set that up