For my IK foam pro 2 i use the Green tip for engine bay cleaning. The orange tip for washing the vehicle and the standard foam for wheel cleaning. Just a personal preference 🙂
I can't thank you enough for this great vid. Just bought my Pro2 and was struggling a bit with dilution and exactly what the tips did and where they were installed. Thanks again.
I just got one of this as my sprayer. Haven't used it yet though I read the user's manual cover to cover. So far this review/unboxing/product demo video is the best in terms of detail and education I've found on youtube about this ik foam pro 2. Thanks!
Perfect 👌 visual tutorial! I didn't want to read the manual, because I just learned better by watching someone else. This is the first video I found that really goes over everything. Thanks for being a great teacher! EDIT: One question- once you put the red or green handle cap on, how the heck do you get it off? I'm squeezing and squeezing but 😶. Ahhh- if anyone else is wondering, use a flat head screwdriver and simply pry it off. I actually suggest just keeping the grey and orange tip in the plastic bag because the green tip seems to be the best and I won't be changing it and would rather not have the two other tips rattling around every time I pick up or set down the unit.
Before this video I thought a sprayer was just a sprayer. The color-coded storage caps and the pressure release instantly sold me on this. I'm glad you also pressed the red buttons, being able to hear the mechanical quality of small moving parts like that is important. 👍
just bought one KP . The foam pro2+ will let you know how it is .GREAT review you should try do more products and get a sponser, sure they would be happy to have someone like you to show off there new products. ALL THE BEST.
I've been thinking about purchasing one of these for a while and after watching this demonstration, I feel more confident in getting one. Awesome video, subbed!
Nicely done KP. I would even suggest to pump up the iK at the halfway point because that's when the nozzle's output dramatically reduces to a point that it's almost useless. Then because the output is so low you are forced to make more passes to make up for the diminished spray pattern, and you end up losing time effectiveness. So I simply put another 10-15 pumps in it and viola, its perfect again. Also, I totally agree with your conclusion on the Green because it allows you more working time with the brush. By the way, after about six months I tried the Axel 3000 and due to the 50% increase in volume, it is easy to get a robust spray throughout a full panel. Try it you will love it.
Great review, thank you. I will start using the green tip because I need the thick foam. Didnt unferstand the manual completely but your explanation is very helpfull.
Excellent review, I watched a couple of reviews on the IK and you're the only one to take the time and demonstrate the three different tips, thanks!!!!
I just bought one of these from Amazon. Haven’t tried it yet. Few comments said it was just about good enough to do the wheels. Think you’ve just proved them wrong. 👍
I just bought this exact pump sprayer. A few questions. 1. Do you wet the entire down before the foaming process? 2. Do you foam the entire car? 3. How long do you let the foam sit on the vehicle? 4. Do you rinse the entire car off and then wash it using the two bucket method with wash mits? Thank you. I've been detailing my own cars for over 40 years and decided to try a pump foam sprayer.
Vincent, I have the same sprayer. Different schools of thought on wet first then foam or just foam. I'm convinced you should foam first UNLESS you have a lot of mud and debris on your car. The foam helps with breaking down the dirt. You can do entire car at once or panel by panel - don't make it hard on yourself. Then, rinse after letting sit (read instructions for the soap/foam you are using - the chemicals (soap in this case) should always come with directions). Absolutely use the two bucket method and something (grit guard or something else) to keep the dirt/grit at the bottom of the rinse bucket. You know this, but the goal is to keep the scratches to a minimum. Have fun and enjoy the process and your car.
By over filling it with liquid you get less air to spray with. Great video but you put too much liquid in the bottle. Try it with less, the spray time is miles better.
got mine as well as brake buster yesterday , was gonna read owners manual before 1st use but after seeing this I feel confident enuff to toss it out. good job!
Very helpful and practical video! Thank you so much! I have just purchased the iK foamer and Mega Foam shampoo, but a bit disappointed as it did not foam good. I tried all 3 tips. I was wondering about the dilution ratio. I will try 4 oz + warm water next time as you did. (It did work well for P&S brake buster wheel & tire cleaner as Pan The Organizer showed in his video.)
I could only got IK Foam 1.5 or the really big one in my country. I like the gray tip for foaming wheels and tires.. need to refill carwash solution twice for foaming the whole small MPV car.. I like the foam, but not the pumping haha about 20 push per panel to have a really good foam.
Hartley Taslim i definitely feel yah on that haha! The foam is great but lots of work to get even coverage of each panel. That's why its probably best to use this on wheel cleaning but to each ones own! I personally like to put in the extra pump work to see the satisfying foam cover the car 🔥
@@kpsdetailing5712 I have karcher at home with its original foam lance.. not a great one but function enough to put soap solutions on the car. When I stay in my apartment, no hose, so IK Foamer really helps to lubricate the car surface (with a lot of hand exercise) haha
Thanks for this man!!! I had my first try with it earlier this evening, but didn’t concentrate the mix enough. I’ll have it ready the next time around.
Wow amazing review. I literally just received the foam pro 2 and decided to buy Adams mega foam as it's compliment and was curious as too how to work it. You nailed it
I live in California and we are once again subject to water restrictions so waterless/rinseless is really the only way to go. I went with the Chemical Guys sprayer along with Ammo Frothe though. It's way more lubricated and proved to minimize abrasions. It's actually easier/more convenient than foaming the car with the pressure washer and rinsing with water. I usually keep my cars clean but I'm sure if the car is heavily soiled, it's not the best option.
For my IK foam pro 2 i use the Green tip for engine bay cleaning. The orange tip for washing the vehicle and the standard foam for wheel cleaning. Just a personal preference 🙂
Couldn’t agree more 👌🏼
You are the 1st to mention when there is maximum pressure built up. Thank You KP
Best review and demonstration of the 20 or so videos I''ve watched on these products. Nice work man! 🙌.
Excellent review, a natural in front of the camera. Nice friendly manner. From the UK.
That really means so much! Thank you so much!
@@kpsdetailing5712 he
I can't thank you enough for this great vid. Just bought my Pro2 and was struggling a bit with dilution and exactly what the tips did and where they were installed. Thanks again.
I just got one of this as my sprayer. Haven't used it yet though I read the user's manual cover to cover. So far this review/unboxing/product demo video is the best in terms of detail and education I've found on youtube about this ik foam pro 2. Thanks!
Thank you so much! Hoping that you will enjoy it!
Very nice and detailed video about ik Foam Pro 2. Keep doing good work
I have watched a LOT of pump foamer videos on YT. So far this is the only one I've seen that actually produces legitimate foam. (Although barely)
You have done the best demonstration of the product, great job. I will buy the products using your attached link. Thank you!!!
Perfect 👌 visual tutorial! I didn't want to read the manual, because I just learned better by watching someone else. This is the first video I found that really goes over everything. Thanks for being a great teacher! EDIT: One question- once you put the red or green handle cap on, how the heck do you get it off? I'm squeezing and squeezing but 😶. Ahhh- if anyone else is wondering, use a flat head screwdriver and simply pry it off. I actually suggest just keeping the grey and orange tip in the plastic bag because the green tip seems to be the best and I won't be changing it and would rather not have the two other tips rattling around every time I pick up or set down the unit.
Before this video I thought a sprayer was just a sprayer. The color-coded storage caps and the pressure release instantly sold me on this. I'm glad you also pressed the red buttons, being able to hear the mechanical quality of small moving parts like that is important. 👍
Great video especially explaining the tips and how they work, I'm definitely buying one based on your review. Thanks
just bought one KP . The foam pro2+ will let you know how it is .GREAT review you should try do more products and get a sponser, sure they would be happy to have someone like you to show off there new products. ALL THE BEST.
EXCELLENT DEMO!! Thank you! More videos of any detailing are welcome!!
The best and most thorough review ever. Kudos.
I've been thinking about purchasing one of these for a while and after watching this demonstration, I feel more confident in getting one. Awesome video, subbed!
Glad I could help yah out on making that decision a done deal! Have a wonderful day!
Great demonstration of all the different nozzles and tips...ordered mine!
Unlike other vids on this product, your vid made me buy it instantly, thank you! Keep it up Champ!
I just got both my multi pro 2 and foam pro 2, so im so happy i found your video! Keep up the goof work!
Great video for demonstrating the different tips. Just what I needed!
Nicely done KP. I would even suggest to pump up the iK at the halfway point because that's when the nozzle's output dramatically reduces to a point that it's almost useless. Then because the output is so low you are forced to make more passes to make up for the diminished spray pattern, and you end up losing time effectiveness. So I simply put another 10-15 pumps in it and viola, its perfect again. Also, I totally agree with your conclusion on the Green because it allows you more working time with the brush. By the way, after about six months I tried the Axel 3000 and due to the 50% increase in volume, it is easy to get a robust spray throughout a full panel. Try it you will love it.
Great video.... Thanks for the step by step. I'm sold
Good job bro👍. Lmao when the plastic bag came back to the set at 2:08 🤣
Thanks for the great review! Someone who actually shows how to use the sprayer, instead of just being a long 10 minute unboxing video.
Very good review! Over filled the tank, but the only guy to show the differences between the 3 included orifices.
Nice one KP. Really good video
The instructions on how to use the product are very detailed and meticulous, I'm from VIETNAM, thank you😍
Great review, thank you. I will start using the green tip because I need the thick foam. Didnt unferstand the manual completely but your explanation is very helpfull.
Just bought one today .. Can't wait to used it. Thank you for the awesome video.
best review of this Product I've seen. Been debating on buying it and your video helped me make the decision. thanks
Looking at getting a foam sprayer and this was super helpful, thanks dude, I'm sold on this!
Excellent video keep up the good work, enjoyed it 5 star ❤
Well done, a very good demonstration of the product
Awesome video. Thanks for demo-ing the tips. Best video on the IK sprayer hands down!
Nice review and demo Sir!. 👍🏼👍🏼
Really well done !! That’s the review I’ve been looking for.
Excellent review, I watched a couple of reviews on the IK and you're the only one to take the time and demonstrate the three different tips, thanks!!!!
Thank you for this video demonstration I just bought one recently and cannot wait to use it
(UK weather 🌧️🌧️🌧️)
Really good job explaining things for a beginner like me.
I just bought one of these from Amazon. Haven’t tried it yet. Few comments said it was just about good enough to do the wheels. Think you’ve just proved them wrong. 👍
Great review, thank you for showing each tip and their thickness output. 👍
Very helpful video man thanks
Great video. Thanks for demonstrating the different inserts.
Thanks for sharing. Good lesson for me. I just bought IK foam pro 2 and will try it out this weekend. Awesome !
Great video I've just ordered the ik9 Pro 2 because of this video... Nice one bro 👌🏾
Mine works great
Thank you for taking the time to review this great content and very well presented .new subscriber from the UK 🇬🇧🇬🇧💙
Good stuff bro. I finally see a good demonstration on this. Looking forward to your future content. New subscriber here
Brotha you have no idea how much that means to me! Thank you so much! Working on a new video at the moment stay tuned!
Nailed it, best info I've seen on these yet. I've got one on the way to use with Brake Buster. 👍🏼
Jock SWEET! Let me know how you like it when you try it out!
I tried with Brake Buster 3:1 ratio and all I ever got was a stream of foam. Never got a fan effect
@@sayuncle9631 You need to use 5:1 ratio
@@nibblenibblenomnom I just chalked it up as a loss; as I tried every ratio possible. Now I just use my extra foam cannon.
I just bought this exact pump sprayer. A few questions. 1. Do you wet the entire down before the foaming process? 2. Do you foam the entire car? 3. How long do you let the foam sit on the vehicle? 4. Do you rinse the entire car off and then wash it using the two bucket method with wash mits? Thank you. I've been detailing my own cars for over 40 years and decided to try a pump foam sprayer.
Vincent, I have the same sprayer. Different schools of thought on wet first then foam or just foam. I'm convinced you should foam first UNLESS you have a lot of mud and debris on your car. The foam helps with breaking down the dirt. You can do entire car at once or panel by panel - don't make it hard on yourself. Then, rinse after letting sit (read instructions for the soap/foam you are using - the chemicals (soap in this case) should always come with directions). Absolutely use the two bucket method and something (grit guard or something else) to keep the dirt/grit at the bottom of the rinse bucket. You know this, but the goal is to keep the scratches to a minimum. Have fun and enjoy the process and your car.
@@bobfugazy4916 thank you for the detailed tips and methods. I appreciate your input
By over filling it with liquid you get less air to spray with. Great video but you put too much liquid in the bottle. Try it with less, the spray time is miles better.
Great review! I bought one because of your review!
got mine as well as brake buster yesterday , was gonna read owners manual before 1st use but after seeing this I feel confident enuff to toss it out. good job!
awesome video, i just got my sprayers today. i would def use orange for carpet/upholstery cleaner, and the green or gray for wheel/tire
Great reviews thanks! I'll get one of these for sure. Green rocks.
Green sure does! Thank you so much for watching!
excellent demonstration. thank you.
Fantastic review 🤘💯❤️
Thanks for the video just what i was looking for.
Nice! Mine just came in today, can't wait to use it
DOPE!!! It's super fun to use haha!
@@kpsdetailing5712 going to be using mine mainly for wheels and tires
Awesome video!! I love how in-depth it is. Keep up the good work!
Excellent, thank you. I'll be picking one up tomorrow
Best video by far thanks
Great job on demonstration.
This is exactly what Im looking for. Thanks for using the tips/nozzles. Now I have an idea how those work.
So the orange one is the good one for washing the car (prewash)
Thanks for the review. I just got my IK to use mainly for cleaning wheels.
I think I’m buying one after watching this
I recommend getting a mini battery air compressor, takes it to the next level. Strap/velcro it on
Wow this was very helpful thank you
Subbed. I like your content man
Just tried out my ik sprayer last night works great
Definitely getting one to use it on tires
Very good video and information, greetings from Brazil.
Muito bom! Obrigado pela demonstração! Já decidi por comprá-lo.
Fresh honest review, viewing from the UK
Does this replace a foam cannon ? What's it's full intended use ? They have the multi already. 🤷
great video!
will it be ok to use a clay mitt to wash with? which foam tip would be ideal?
Great Review. much appreciated.
Very helpful and practical video! Thank you so much! I have just purchased the iK foamer and Mega Foam shampoo, but a bit disappointed as it did not foam good. I tried all 3 tips. I was wondering about the dilution ratio. I will try 4 oz + warm water next time as you did. (It did work well for P&S brake buster wheel & tire cleaner as Pan The Organizer showed in his video.)
I could only got IK Foam 1.5 or the really big one in my country. I like the gray tip for foaming wheels and tires.. need to refill carwash solution twice for foaming the whole small MPV car.. I like the foam, but not the pumping haha about 20 push per panel to have a really good foam.
Hartley Taslim i definitely feel yah on that haha! The foam is great but lots of work to get even coverage of each panel. That's why its probably best to use this on wheel cleaning but to each ones own! I personally like to put in the extra pump work to see the satisfying foam cover the car 🔥
@@kpsdetailing5712 I have karcher at home with its original foam lance.. not a great one but function enough to put soap solutions on the car. When I stay in my apartment, no hose, so IK Foamer really helps to lubricate the car surface (with a lot of hand exercise) haha
Best review on this 💯
Thanks for this man!!! I had my first try with it earlier this evening, but didn’t concentrate the mix enough. I’ll have it ready the next time around.
Wow amazing review. I literally just received the foam pro 2 and decided to buy Adams mega foam as it's compliment and was curious as too how to work it. You nailed it
Great minds think alike! Thank you so much! Hope you like your new toy!
I live in California and we are once again subject to water restrictions so waterless/rinseless is really the only way to go. I went with the Chemical Guys sprayer along with Ammo Frothe though. It's way more lubricated and proved to minimize abrasions. It's actually easier/more convenient than foaming the car with the pressure washer and rinsing with water. I usually keep my cars clean but I'm sure if the car is heavily soiled, it's not the best option.
Aye Miguel is the plug 🔌 🔥🤟🏻
Great video mang! Just got one and get wait to use it! Got some Ammo frothe on the way to use with it. Hope I get some good results.
It’s a great foamer and I use it with P& S Brake Buster on my wheels and tires
Enjoyed your video and thanks for doing it
What ratio are you using and what tip? I used a 3 : 1 ratio and orange tip, but all I ever got was a steady stream
@@sayuncle9631 5:1 for P&S Brake Buster. You also probably want to use the green tip, I've heard that it is better.
Very good video.!
I just saw this and it is useful.
Thank you
New subscriber. Keep it up I just bought one!
Just tried mine out too!
Nice video. You sure you don't have smudges on your camera lens?
Great video man, I just got mine and wanted to know witch tip to use.
Tks Man! Excellent vídeo. I'll buy for me becouse you. Tks
How do u Open it wen its to tight to open the sprayer
Will the cannistor do a full normal car
Love video 🔥🔥🔥💪🏾
Just order one after watching your video. :)
I've got this K2 the only negative is the amount of pumps you need to spray on vehicle, so I only use mine for wheels and engine bay
I noticed that as well
Great informative video
I keep checking my eyeglasses for smudges while watching this video. Great video, though. Thanks for the info. I'm going to have to try that.👍🏾
Great video thanks 😊 👍
Yeah I just purchased one for my detailed and business
Great to have!