@GuitarAriaFreak1010 You need to plug both the POD Studio and FBV into separate USB ports. Check out the featured video on this page and see if it helps at all.
@ES1sub Have you updated the firmware on your FBV with the Line 6 Monkey software? Also, did you calibrate the pedal after the update? Have you tried a new CAT 5 cable in case the one you are using is damaged?
Good video. Just an FYI, that Guitar Center and Amazon have these for $159.15 right now. I grabbed one yesterday from Guitar Center. Great deal on a great pedal.
@ES1sub so you are saying the pedal does not function when you connect it to your amp or POD via CAT 5 cable? Have you ruled out your amp or POD as the possible culprit to be sure? If you have, then you should contact your local service center and arrange a repair as this does sound like it could be hardware related.
it is required that you re-Configure the FBV MKll (on the Pod Farm 2) every time you using it. or it will generate or save a file that will remember my last settings?? Thanks in advance!.....
Hey, i've got my fbv express last week but i have no idea on how to use it, when i plugged it to the amp nothing was happening so, i tried calibrating it but i can only do the steps( for calibration ) with the usb cabel and not the one that goes from the amp to the controler. And after i finish calibrating and i plug it to the amp nothing happens, only some lights shine for a sec on the amp and the channel switches from A to B, but then i cant do nothing, please help.
@Line6Support I updated the firmware, recalibrated it and tried a new cable, nothing works. the light only comes on when it is connected to my computer through use of the usb cable.
i plug the RJ-45 cable into the amp and the board but nothing happens, no sound comes out of my amp and no light comes on on the pedal. what do i have to do to get it working?
Hi. I am completely stuck. I got my fbv shortboard mkii to use with my pod hd pro but when I plug it into the pod nothing happens accept the shortboard displays "FBV SB MKII". None of the switches work?? All latest firmware etc is installed. Any help would be appreciated.
video is great. however after 1 PEDAL TOE and rolling back to heel position, 2 PEDAL MIN does not display, it continues to display 1 PEDAL TOE. any suggestions to fix this?
can we see this one or much better the FBV MKll shortboard (my 1st choice) in action w/ your Pod Studio (UX1) & Pod Farm2 (w/ a Intel core, windows Laptop). for: - Home Recording (plus setup of course) - Live (on stage w/ setup) I'm so closed in buying this product , i just want to make Sure that this is suitable for what i need (cuz' i already cut my arms and sell it so that i could buy your product) I dont want to regret it. please upload a video for UX1, FBV MKll Shortboard & Pod Farm2.
@ES1sub Have you updated the firmware on your FBV with the Line 6 Monkey software? Also, did you calibrate the pedal after the update? Have you tried a new CAT 5 cable in case eeh one you are using is damaged?
Wow what a nice smooth velvety voice. Like slowly sipping a bourbon on a fall afternoon
Thank you for this!
@GuitarAriaFreak1010 You need to plug both the POD Studio and FBV into separate USB ports. Check out the featured video on this page and see if it helps at all.
thank you for this !
@GuitarAriaFreak1010 my pleasure!
nailed it.... great simple and to the point
@ES1sub Have you updated the firmware on your FBV with the Line 6 Monkey software? Also, did you calibrate the pedal after the update? Have you tried a new CAT 5 cable in case the one you are using is damaged?
Good video. Just an FYI, that Guitar Center and Amazon have these for $159.15 right now. I grabbed one yesterday from Guitar Center. Great deal on a great pedal.
@ES1sub so you are saying the pedal does not function when you connect it to your amp or POD via CAT 5 cable? Have you ruled out your amp or POD as the possible culprit to be sure? If you have, then you should contact your local service center and arrange a repair as this does sound like it could be hardware related.
Hello. I have a FBV Express MKII. How can I do the same calibration in this controller?
Will this work for the line 6 spider4 30watt? Will the looper work?
do you know how to calibrate the wah pedal in a fbv longboard?
Do you know how to change the stand by time for change a bank?
it is required that you re-Configure the FBV MKll (on the Pod Farm 2) every time you using it. or it will generate or save a file that will remember my last settings??
Thanks in advance!.....
Hey, i've got my fbv express last week but i have no idea on how to use it, when i plugged it to the amp nothing was happening so, i tried calibrating it but i can only do the steps( for calibration ) with the usb cabel and not the one that goes from the amp to the controler. And after i finish calibrating and i plug it to the amp nothing happens, only some lights shine for a sec on the amp and the channel switches from A to B, but then i cant do nothing, please help.
@Line6Support I updated the firmware, recalibrated it and tried a new cable, nothing works. the light only comes on when it is connected to my computer through use of the usb cable.
Does it work with POD XT?
How compatible is this with a PodX3 Pro?
What does a person do when after holding down the 'D' button and plugging in the cable the pedal screen does not say "Calibrate pedal?"
Did you solve the problem?
Thanks :-)
i plug the RJ-45 cable into the amp and the board but nothing happens, no sound comes out of my amp and no light comes on on the pedal. what do i have to do to get it working?
Hi. I am completely stuck. I got my fbv shortboard mkii to use with my pod hd pro but when I plug it into the pod nothing happens accept the shortboard displays "FBV SB MKII". None of the switches work?? All latest firmware etc is installed. Any help would be appreciated.
Does anyone know if this shortboard is compatible with the line 6 spider ii ?
How To fbv3 Calibration
You have a good voice! xD... How much for this pedal?
video is great. however after 1 PEDAL TOE and rolling back to heel position, 2 PEDAL MIN does not display, it continues to display 1 PEDAL TOE. any suggestions to fix this?
I just got one and I have the same issue. Were you able to solve it??
This isnt working for mine. Any info please
can we see this one or much better the FBV MKll shortboard (my 1st choice) in action w/ your Pod Studio (UX1) & Pod Farm2 (w/ a Intel core, windows Laptop).
for:
- Home Recording (plus setup of course)
- Live (on stage w/ setup)
I'm so closed in buying this product , i just want to make Sure that this is suitable for what i need (cuz' i already cut my arms and sell it so that i could buy your product) I dont want to regret it.
please upload a video for UX1, FBV MKll Shortboard & Pod Farm2.
I want a Shortboard :( Their too expensive.
@ES1sub Have you updated the firmware on your FBV with the Line 6 Monkey software? Also, did you calibrate the pedal after the update? Have you tried a new CAT 5 cable in case eeh one you are using is damaged?