2017 Ford Raptor Winch Installation
HTML-код
- Опубликовано: 7 сен 2024
- Installation of the Warn Zeon 10s or 12s Platinum into the 2017+ Ford Raptor. Mounting kit sold at swarfworks.com...
Note: The mount will ship in one box, and the fairlead shims and hardware will ship in another. Winch, fairlead, and hook not included.
Audio from www.bensound.com
I love the winch and face plate. clean
Badass setup man!
Great video! Ordering your full set-up this week from your website. Do you have a video on the install of the full race intercooler?
Nice! I was wondering about the ability to mount a winch on a 2nd gen Raptor...wasn't sure about the intercooler locations and they would interfere with a winch.
Thanks! Yeah I installed the Full Race intercooler knowing in advance that the stock location was no good. Then I laser scanned it multiple times and spent lots of time on the computer modeling it. Let's just say there isn't much wasted space now.
Great stuff I was wondering the same thing about the intercooler, thx a lot for the very informative vid!
Hey do more vids like this realy like the way u do this videos are great litteraly please do more tutorials like this realy helpfull
Please do a gen 3 raptor kit.
You bet! I have the kits in stock. Hoping to make an install video next week. 🤞
I need a Raptor. Maybe I will replace my Rubicon with one soon.
Replaced an AEV Rubicon this week with a Raptor. Love it!
👍
@@extspence thinking about doing the same. Only worry is the extra wheelbase making breakover angle a lot worse..I don't wanna get the underside caught up at all my favorite offroad places 🙁
@@benwilliams9172 You have to look at things totally different. Wheelbase will get you. But the Raptor can jump! Just replace those favorites with speed and jumping places. I did upgrade to around 550 - 575 hp. Feels so much better than the Jeep when accelerating.
@@extspenceyour right man. And you make that much power on your raptor, how so?
Great Video. I am looking at ordering this kit. What Intercooler kit do you have and what did it come with? I see the ADD but which kit was it? I see that it was a different one offered through the swarfworks website. I may order the winch separately through amazon as it sold $800 cheaper on there.
Raif Zakhem Hey Raif. We prefer the Full-Race V2 intercooler. I have it on my site. Send me a message and I can put a package price together for you if you’d like.
Good job 👍🏼
Nice! Do you have one for the non raptor f150 5.0 as well?
Cool
Why can't the 2017 raptor just come with a tow cable standard
Fantastic video but I’m not going to remount my intercooler in front of my radiator. It’s too hot in California to be blocking my radiator that much. I wish there was a better solution for the folks in hotter climates. I get it’s good for the turbo but not for my cooling system.
TDGarage thanks for the note. I have heard of only very few instances where there’s been a cooling issue. I do have a rear winch mount coming out now that you just need to relocate the spare tire. Just fyi.
I almost just want to buy this mount for added front frame strength.
Is this the stage right guy lol. Dude i think i keep on running into you. white raptor guy from midland . haha
I like it.👍
Can i get a link to this set up plz
Howdy! There is a link in the description. swarfworks.com/2017-2020-ford-raptor-winch-mount/
Where can I get this whole kit ?Or where can I get it to in stall on my 2018 Raptor? Thanks for the video
Any chance you can manufacture one for a Gen 1 Raptor as well?
Will this work on a 2018 F150 Platinum
Is the y harness you use included in the kit? Or something you just made?
Dennis Smith it’s not included. I was offering it initially, but currently am not. I’m working on a new one but don’t have it ready. Hopefully soon
SwarfWorks that would explain why I didn’t get one lol. Definitely will be on the lookout for the new one.
Why did you not fuse the + wire? If the motor lead shorts you will have a massive fire
Cruiserhead 1 Thanks for the question. It’s just due to the fact that the winch can pull 469 amps at full load. So you would need to fuse it for at least 5-600A. The battery can’t put out much more than that. So even if there is a short with a 500A fuse, it would be bad. So at that point, adding a fuse is just anding a point of potential failure.
SwarfWorks 👍
with this kit do you have to replace the intercooler first?
Silas Brown yes sir that’s correct.
What’s your fog light setup and how did you mount those?
WaT?
The grill just comes off that easy??
Eric Wang not at first. But after taking it off a bunch of times it does.
What about the front license plate
peterk814 if you’re “lucky” to live in a state where a front plate is mandatory, we do make a plate relocation bracket that mounts to the front tow hook.
Will this work on the F150 also non raptor
It should. I haven't tried though. My brother has a '17 Platinum F-150 and looking at it, I don't see why it wouldn't. The grill is obviously going to be a little different, but the way I made the fairlead mount, the distance that the faillead sticks out is adjustable.
It does work on non raptor ecoboost trucks. 15-17 for sure. I have done it on my 16
@@hybridtuner I have a 2016 ecoboost and I would like to do this. I have a full race intercooler and winch. Where does the winch sit in relation to the intercooler pipes? and pics you could share please?
You have to have the 2017 and up piping for the intercooler. Unless full race has changed the 2015-2016 kit the winch won’t fit. When I first bought my intercooler I ran into this problem and had to send the piping back to them and get the pipe kit for for the raptor. I did a lot of research and sent pictures and videos back and forth to figure this out but trust me. It does not fit with the 16 piping. Check out my Instagram @a.cecil there are some pictures there. DM me if you have any other questions.
Who makes the full race intercooler that you have on your truck?
Full-Race it the company name out of the Phoenix area. Here is their slightly updated one that is actually less expensive. www.full-race.com/store/ecoboost/f150-raptor-gen2-ecoboost-2017/2015-f-150-ecoboost-freakoboost-intercooler-cac-upgrade-kit/
SwarfWorks lol well I feel dumb. Thank you very much!
Haha no worries. I think that I thought the same thing when I heard of them.
Is the intercooler relocate kit pretty straight forward to install?
Curt Davis go to the "full race" website they have a downloadable PDF file with a well written instructions. But to answer your question. I think yes it is straight forward but depending on what package you have on your truck, how much you want to mod your truck, warranty issues, how mechanically inclined you are, how much you want to spend and how much tools you have will vary this opinion greatly. I priced everything out to be well over 3.5 grand doing the work myself.
What lights are you running in the front?
In this video, I'm running a pair of Rigid DOT/SAE lights, so cheap spot lights, and a set of little KC HiLites. Then in this video, you can see me installing the pair of Baja Designs Squadron Pro flush mounts. I just added 4 Baja Designs LP9's to it as well (not shown in the video).
Thanks...do you also sell the wiring kit you used for the baja designs lights? Love the winch and that will probably be my first purchase....well and of course the intercooler since it has to be moved.
Tell your boss you want high quality knee pads or else you're picketing.
Nice can I have it
DM’d
Where does your liscense plate go bro ?
On my 2013 Raptor I did a similar winch install and I just rotated the bracket 180 degrees. Screws on the bottom. Problem solved.
Front plate? Sorry to hear that you live in a state that needs one. Just kidding. I've seen brackets like Curt mentioned. Should work if needed.