Dean is a great addition to the channel, I know he’s been around for a while but glad to see em get more camera time... and air time 🤪 Should put some limiting straps on the EXB if it keeps pulling those shocks apart!
apparently he has no shortage of money to allow himself to destroy these models as if nothing had happened. However, it is a moral slap in the face for those who cannot afford these models, or not!
@@TheGandorX actually they used these models to destroy them, and for me it's not fun, but they don't care because they don't lack the money to buy them back.
A great man once said "the best Rc car is the one that puts the biggest smile on your face" I love all your tips and tricks. Love learning new things every time you post a video. Hope everything with the Lambo works out and nothing else happens to her.
Hey Kev. I'm 45 (going on 12). Watching you being a nutter has got me obsessed with rc. I still have my first dirt bike (which I've had for 31 years and stacked on the bitumen 4 days ago, after a few bevvies). I have no idea where I'm going with this. Good night from Australia.
Would love to see a metal test on that chassis. As a machinist I'm with you Kev, thats NOT 7075. Seems a bit more like 6061 to me. Nice to see that bash bar stopped you from doing it in again, and the RPM arms will up the strength even more. BASH ON!!
What an awesome Fun test session Kev 🤗. Loved the chassis hammer test and longer screw mod. I've ran slightly longer 12.9 grade screws, but didn't think to drill out the bulkhead for 25mm 🍻😎💪👊👊
You know when you love Kevin Talbot content when you been laying in bed watching all of his videos for the past two days rewatching his new and old videos love your content Kevin keep it up and happy Easter
Good day mate,, my 5 year old, and myself love your channel,, everything we have heard/learned from you proves to be the gospel,, and that’s refreshing and fabulous,, to say the least!! However I did just purchase my son a Traxxas X-Maxx 8S,, and I’m ashamed to admit that I’ve been in the hobby,, 30years,,, and my 5 year old can handle and outperform his father,, when I asked him how he learned to drive this way,, why from Kev, Daddy( referring you Sir Kevin,, I thank you Sir,, and your wonderful group of misfits,, lol. I hope you continue to be you,, no matter how successful you become,, your honesty and genuine personality,,, is what makes your channel,, best of luck,, KEVIN,,💯💪👊
I got my xmaxx because of you. I broke it i once and. Where I live I couldn’t get the shock cap I needed so I had to buy a whole set of shocks just for the cap. Well worth what I paid. That was the only issue I had sense I got it. Nothings broken and I take it out for a blast 3 times a week sometimes 4 or 5. I take it to work and let everyone try who’s never played with rc cars and haven’t had an issue
Love your Videos man always bring a smile to my face and gives me a boost to take my RCs out for a session with my boys... Cheers to everyone in your crew!!
Kev tells the truth and sometimes the truth hurts ..... I love this channel no bull shows it how it is , these things are not cheap to buy people deserve the right to know what there buying at the end of the day !
Just a warning to people who want to use a drill, running high speed on screws going into plastic can melt the holes and make them unusable if heated too much. Drill at slow speed and you won't melt the plastics. And still is way faster than by hand.
One of our fellow RC guys has the k8exb , I was completely ready to build one then I just looked at the chassis and knew it was crap and a lie to there customers , very disappointed , thanx for putting it out there , I'll be getting the bracing bar and giving that a try , looks to be very strong
How to fix a bent chassis: Step 1: put chassis on upside down Step 2: do the jump that bent it The jump will bend it again, but since it’s upside down, it will bend it back into shape!
hey kev you have inspired me to get all my rc cars out again like my summit, slash ultimate, outcast 6s, e-revo 2.0, and rustler thanks for inspiring me to fix them and use them again.
Great vid Kev!! Where was Arrma fan boy? I was sure he’d show up and tell us the EXB was a “Xmaxx Killa”!😂😂😂 Love what you guys are doing! Does the bash bar guy take investors?!?!👊🏻🔥🔥🔥
Arrma and M2C collab for a new model! And they need you in on their team I've heard you address a few things in vids that have valid points. From the short screws to motor shifting after being sent to the moon. Great stuff Kev you rock!
Funny thing is that Kev was the one got me in to hobby grade rc's and now I'm buying my own TRX4 using money form a paper boy job and I'm only 12 years old
Look at all the mods you have to do to these Arrmas just to get them close to an X Maxx. Its insane. You got braces all over the place! And a big ball of silicone under the motor. Lovely! I don't know Kev.......
I love the guys who won't buy a Tekno because it is "too expensive to build" but they have $1,500 in their 6s Kraton smh.................. I have less money in my ET48.3 build than I do in my Outcast 6s.
The metal from the arrma chassis got stretched. So, to make it correct, you have to shrink it. Kinda doesn't ever get right again really. The m2c has extra bracing welded on, makes the stretching kinda difficult(not that Mr. Kev couldn't eff it up, lol). And btw, that metal for the arrma chassis is cheap AF!! Great vid man, thank you!
🤣Dean!🤣🤣 what the... he's Mr Destruct0. LMFAO. SO FUNNY TO WATCH HIM BASH AND CRASH. He can't make it 10 feet without breaking something. I love it, hilarious 🤣😆 #BashBarsStraightThough #ItJustPopedOut LoL
I agree 💯 Arrma should be making a stronger chassis for the EXB. At least have some sort of reinforcement built into chassis. Something like the Outcast design but even better.
There's a difference between machine 7075 aluminum and stamped 7075 aluminum. Arrma uses stamped 7075 and m2c uses machine aluminum. 6061 t6 machined aluminum will be 2xs stronger than stamped 7075 aluminum. Machine aluminum will cost 2xs the amount than machine that's the reason why arrma uses stamped aluminum and race kits uses machine aluminum
I have machined a boatload of 6061 and 7075. That may be 7075 aluminum, but it is either in an annealed state (not heat treated), or it has been improperly heat treated. Try welding on it and see how it goes. 7075 is like impossible to weld. If it is indeed 7075, maybe you can heat treat it.
Yo Kevin keep the vids up loving them There is one car I am looking at but I don’t see anyone that bashes it as much that you do to your cars You should look into or try the redcat shredder 1,6 scale dirt cheap
I think it is cool because it's more for the custom hobbyist than the x maxx. For example, you can't even add a different connector to a Traxxas esc without voiding a warranty, battery trays only fit their batteries perfectly, etc.
Kevin , arrma getting those chassis all wrong but watch out , the arrma big rock it's going to get bigger and tougher, that's the xmaxx killer just waiting. Make it the same way just thicker plastic and bigger 1/5 Scale babe. Lol I hope them do that
First
Hahaha you win
U were the first
u win the match
BOOM!!
Aww, i thought i was but oh well... GG!
Dean is a great addition to the channel, I know he’s been around for a while but glad to see em get more camera time... and air time 🤪
Should put some limiting straps on the EXB if it keeps pulling those shocks apart!
dean is great!!
Who doesn’t love it when Kevin goes out with friends and plays; who can break their RC the quickest
I do the same with FPV copters. Broke 2 of them after the first two flights 😬
No actually. I wonder what's normal usage that an RC can handle. And under those conditions, a comparison between the best ones.
apparently he has no shortage of money to allow himself to destroy these models as if nothing had happened.
However, it is a moral slap in the face for those who cannot afford these models, or not!
@@TheGandorX actually they used these models to destroy them, and for me it's not fun, but they don't care because they don't lack the money to buy them back.
@@tayfu8536 I think you have a point here. I have an RC car and I wouldn’t try break it because I don’t want to waste money and I really like mine.
A great man once said "the best Rc car is the one that puts the biggest smile on your face"
I love all your tips and tricks. Love learning new things every time you post a video.
Hope everything with the Lambo works out and nothing else happens to her.
Hey Kev. I'm 45 (going on 12). Watching you being a nutter has got me obsessed with rc. I still have my first dirt bike (which I've had for 31 years and stacked on the bitumen 4 days ago, after a few bevvies). I have no idea where I'm going with this. Good night from Australia.
What are u smoking 👀👀
@@evanstutzman7361 I thought it was pretty clear I was drinking.
I live in Australia, I’m up in the Northern Territory. How about you?
Made complete sense
Love it!
Cheers from the states....I want to thank you. Due to watching ALOT of your videos, I bought my 1st RC car. TRX4, as we do alot of hiking & camping.
Would love to see a metal test on that chassis. As a machinist I'm with you Kev, thats NOT 7075. Seems a bit more like 6061 to me. Nice to see that bash bar stopped you from doing it in again, and the RPM arms will up the strength even more. BASH ON!!
I am thinking it is annealed 7075, If you have a kiln try turning one into t4 and another into t6 and see if it helps.
@@ddrowdy7666or its cheap cast 7075 and the other aftermarket chassis is billet
I Wanted to click on the search button but then got a notification of this video and I accidentally clicked on it but I do not regret it
That happens to me a lot
Just ordered the bash bar. I haven’t even driven this beast yet but any damage mitigation makes a ton of sense to me. Thanks dude.
What an awesome Fun test session Kev 🤗. Loved the chassis hammer test and longer screw mod. I've ran slightly longer 12.9 grade screws, but didn't think to drill out the bulkhead for 25mm 🍻😎💪👊👊
Thanks bro! M2c wins the hammer test!!
Hello from NW Pennsylvania USA! Just ordered a Bash Bar for my 1/8th EXB because of you. Love your videos and passion. Keep it up and best wishes.
I think Kev got a contender for absolutely crazy driving.
Thanks for making this hobby exciting. I've been in it for 28 years. Well Done.
That Team Corally Jambo took a beating and seem to of held up besides the pillow ball popping. Nice vid!
That and something was going out in the diffs it was crunching pretty bad.
@@jeremybreeden4228 Those sounds were horrendous!
Hey man I love your vids and The reason I saw the vid so fast is coz I have notifications on 😁😁😁👍
You know when you love Kevin Talbot content when you been laying in bed watching all of his videos for the past two days rewatching his new and old videos love your content Kevin keep it up and happy Easter
haha epic!! happy easter!!
I do the same thing in almost every minute of my free time
@@justinp3665 it's every day for me Kevin is the reason why I brought my first nitro rc car
10:51 oooOOOOOOOHH lel. Btw I love it how Kev still says OOOOHHH even though he seen so much RC cars crashing
You uploaded this right before I had my Roast dinner... I think you can agree the Roast dinner being first was sensible😂
Kev: WORLDS BEST RC CAR
Also kev : talking about all the problems
Good day mate,, my 5 year old, and myself love your channel,, everything we have heard/learned from you proves to be the gospel,, and that’s refreshing and fabulous,, to say the least!! However I did just purchase my son a Traxxas X-Maxx 8S,, and I’m ashamed to admit that I’ve been in the hobby,, 30years,,, and my 5 year old can handle and outperform his father,, when I asked him how he learned to drive this way,, why from Kev, Daddy( referring you Sir Kevin,, I thank you Sir,, and your wonderful group of misfits,, lol. I hope you continue to be you,, no matter how successful you become,, your honesty and genuine personality,,, is what makes your channel,, best of luck,, KEVIN,,💯💪👊
Thanks for your kind words, means a lot!! I'm glad you're enjoying the xmaxx, its a beast! good job to your son too! haha
*very Big , nice car rc.tôi rất đam mê xe rc và thích video của bạn,tôi là người Việt Nam*
I got my xmaxx because of you. I broke it i once and. Where I live I couldn’t get the shock cap I needed so I had to buy a whole set of shocks just for the cap. Well worth what I paid. That was the only issue I had sense I got it. Nothings broken and I take it out for a blast 3 times a week sometimes 4 or 5. I take it to work and let everyone try who’s never played with rc cars and haven’t had an issue
The vid hasn't been out long enough to watch it all and there is already a dislike. Haters cannot even take a break on Easter😂
Haters gonna hate but we just have to ignore them
some people just hate everything in life by default, you have to feel sorry for them!
Sounds like my neighbor. Moan moan moan over anything and hates everything apart from birds... She loves birds 🤣
@@KevinTalbotTV how true eh
But I gave him a like 👍
Love your Videos man always bring a smile to my face and gives me a boost to take my RCs out for a session with my boys... Cheers to everyone in your crew!!
One of the funniest rc videos I've seen in a while. 😂🤣😂
M2c can officially say it’s kev proof! Literally 😂😂😂
best branding for any part
Finally I get to see a corally rc car in one of your videos hell yeah
You know it’s a good day when Kev posted
Jeeeeeesus!! Ian wasn't bashing that car, he was trying to MURDER IT!!?? haha Wes, Liverpool, UK.
Happy easter and i hope your well and healthy
Dean straight cracking me up! His bashing name should be "Mean Dean"...plus you know it's rough if Kev feels bad for an RC! 😂
Dean the destroyer
Kev tells the truth and sometimes the truth hurts ..... I love this channel no bull shows it how it is , these things are not cheap to buy people deserve the right to know what there buying at the end of the day !
Love these older videos ❤
I had that good feeling today when all of my favorite youtubers posted on the same day
Cuma gue yg suka nonton kek ginian 😌
Just a warning to people who want to use a drill, running high speed on screws going into plastic can melt the holes and make them unusable if heated too much. Drill at slow speed and you won't melt the plastics. And still is way faster than by hand.
I know this is a year old, but you should always drill metal slow with more pressure.
One of our fellow RC guys has the k8exb , I was completely ready to build one then I just looked at the chassis and knew it was crap and a lie to there customers , very disappointed , thanx for putting it out there , I'll be getting the bracing bar and giving that a try , looks to be very strong
cmon guys lets get kev to 1 mil!!!
That Jumbo was out of control. Loved it!!
How to fix a bent chassis:
Step 1: put chassis on upside down
Step 2: do the jump that bent it
The jump will bend it again, but since it’s upside down, it will bend it back into shape!
Great thinking
Love your videos
👍
@@luisestrella45 Lol thanks! 😆
I like your all toys and good job.
We need to get to 1 mil subs for kev
And a Happy Easter to you and that bash bar Kev ! #Road To One Million
Hey bro adding some good droop screws to your kraton will stop the shock end from pulling out. I put them on my outcast 8s
When in doubt, air it out !! Great bash vidy Kev !!!!
I love your videos so much have a good day all of guys
I love how Kevins Kraton sounds smooth as butter and everyone else's RC cars sound like they have rocks in the gears, lol.
Wow that chassis ! Good test man - corners cut there by the looks of it
Happy Easter from the states.. hope you have a good day kev.
Happy Easter
@@Dan.B306 happy Easter buddy
hey kev you have inspired me to get all my rc cars out again like my summit, slash ultimate, outcast 6s,
e-revo 2.0, and rustler thanks for inspiring me to fix them and use them again.
those rcs are cool and i have a qwesh um after 2 weeks dose you chager for your rc go out becust they want you to by a supper chager??
Those tire explosions was mental!
Cheers to Dean!
Hi kev just want to say I love your vids and they always make me happy
Love your videos! You help me decide which cars to buy, and helps me hobby more!
Oh baby let's go!!!! I can't wait to see what you've done now!!!!
Great vid Kev!! Where was Arrma fan boy? I was sure he’d show up and tell us the EXB was a “Xmaxx Killa”!😂😂😂 Love what you guys are doing! Does the bash bar guy take investors?!?!👊🏻🔥🔥🔥
Yoo Kevvvv!!! Ur Olmost at 1,000,000 subscribers!!! I'm soo happy
Cheers from Mexico 🇲🇽❤️
P. S. I Love your videos
This is like the only channel I watch now, and it also got me into the hobby all because of kev
Arrma and M2C collab for a new model! And they need you in on their team I've heard you address a few things in vids that have valid points. From the short screws to motor shifting after being sent to the moon. Great stuff Kev you rock!
Yes new video i was just thinking when you upload new video😀😀
Happy Easter Kevin!😁👍🏻
Some day, I don’t know when, I will get an X Maxx or a Kraton (def the X Maxx 😁). Until then, I will live through Kevin!!
dont dislike him he is the best rc youtuber kevin you should build a full metal outcast
Funny thing is that Kev was the one got me in to hobby grade rc's and now I'm buying my own TRX4 using money form a paper boy job and I'm only 12 years old
Thanks Kevin you and the gang started my day off good with this video
Happy Easter Sunday ❤
Just ordered OUTCAST 8S crash bar from radical RC bash bar! Can’t wait to get it. Never bought anything from UK. Will it take extremely long?
Nice in air control kev!!!! Watching dean just trigger down was painful 😂🤣😂
Look at all the mods you have to do to these Arrmas just to get them close to an X Maxx. Its insane. You got braces all over the place! And a big ball of silicone under the motor. Lovely! I don't know Kev.......
I love the guys who won't buy a Tekno because it is "too expensive to build" but they have $1,500 in their 6s Kraton smh.................. I have less money in my ET48.3 build than I do in my Outcast 6s.
@@slick2500 its that Arrma cult thing.....
7:40 I think facial means something very different in America
Found you because of the Kiwi's (Joe & Amber) video about X maxx upgrades you recommended. Subbed because of the great content!
Thanks for the sub!
I was thinking hard about getting a bash bar this has just sold me on it
The camera quality is very good!!!
Lovely performance! Cheers!
Happy Easter Kevin you are the best rc you tuber you helped me buy mc first rc
The metal from the arrma chassis got stretched. So, to make it correct, you have to shrink it. Kinda doesn't ever get right again really. The m2c has extra bracing welded on, makes the stretching kinda difficult(not that Mr. Kev couldn't eff it up, lol). And btw, that metal for the arrma chassis is cheap AF!! Great vid man, thank you!
Great Upgrades and tips. Bash bar sounds great.
🤣Dean!🤣🤣 what the... he's Mr Destruct0. LMFAO.
SO FUNNY TO WATCH HIM BASH AND CRASH. He can't make it 10 feet without breaking something. I love it, hilarious 🤣😆
#BashBarsStraightThough
#ItJustPopedOut
LoL
And I thought Kev was savage 🤣
Thnx for this, just ordered one✊🏽😁
I agree 💯 Arrma should be making a stronger chassis for the EXB. At least have some sort of reinforcement built into chassis. Something like the Outcast design but even better.
No way is that stock chassis 7075, like the way you glued a bolt of each size on front of drawers👍
This makes me distrust Arrma and it is really foul.
There's a difference between machine 7075 aluminum and stamped 7075 aluminum. Arrma uses stamped 7075 and m2c uses machine aluminum. 6061 t6 machined aluminum will be 2xs stronger than stamped 7075 aluminum. Machine aluminum will cost 2xs the amount than machine that's the reason why arrma uses stamped aluminum and race kits uses machine aluminum
I love kevin talbot im a biggggg fann
Great vids luv dem
Love your videos Kevin. I just recently got my Traxxas Revo 3.3 Nitro going. Its so much fun. Wish i had as many cars as you do lol.
I have machined a boatload of 6061 and 7075. That may be 7075 aluminum, but it is either in an annealed state (not heat treated), or it has been improperly heat treated. Try welding on it and see how it goes. 7075 is like impossible to weld. If it is indeed 7075, maybe you can heat treat it.
I totally agree, I was going to buy one of these till I saw your videos on it. If they made it cost $100 more with a better chassis, I'd buy it.
Love this channel keep up with the good content and just personally I believe it will be better to build the monster truck when you have a new place
Yo Kevin keep the vids up loving them
There is one car I am looking at but I don’t see anyone that bashes it as much that you do to your cars
You should look into or try the redcat shredder 1,6 scale dirt cheap
Another great video kev! Happy Easter? Not sure if y'all celebrate Easter over yonder.
Kev what charger do you use or would you recommend for a new person that is into the hobby
Almost at 1 million subscribers!!!
your my favorite RUclipsr if you see this commit please reply I love your videos keep up the good work
I saw it.
Dam that radical rc dude bashes really hard
Like from portugal portugal 🇵🇹
I miss the xmaxx videos but god video 👍🏼
Ohhhh poor Corally. Love those cars
Hello Kev ! 😀 How about Team Corally RC's ? Do you plan to get some and test it ? That would be great 🙂
Great to o see some Team Corally on your channel
I think it is cool because it's more for the custom hobbyist than the x maxx. For example, you can't even add a different connector to a Traxxas esc without voiding a warranty, battery trays only fit their batteries perfectly, etc.
Kevin , arrma getting those chassis all wrong but watch out , the arrma big rock it's going to get bigger and tougher, that's the xmaxx killer just waiting. Make it the same way just thicker plastic and bigger 1/5 Scale babe. Lol I hope them do that