Citroen C1 Mk. 2 Dash Cam Install

In today’s video, I’m installing a Next Base dash cam hard wire kit into Liz’s Mk 2 Citroen C1. The procedure to install this would be the same for the Peugeot 108 and Toyota Aygo Mk 2. I used a 5-amp fuse in the (awkwardly located) fuse box to the right of the OBD2 port and a piggy back adapter for the micro fuses. Next, I used the factory earthing bolt to the right-hand side of that fuse box as the negative. This makes sure that the supply is earthed correctly and is only activated when the ignition is turned on, also known as an accessory power supply. I ran the cable up the A pillar on the driver’s side, looking the remainder of the cable behind the panel near the driver’s foot (the panel shown in the video). I ran the cable across to the rear view mirror and stuck the dash cam mount (an adhesive one, nut the suction cup) next to the mirror and powered it up. Seems pretty simple, right? It tried to fight me at every step, I ended up changing a few electrical connectors etc, but I prevailed!
Please follow me on Instagram @dabdiy for sneak peeks of what I'm up to between videos and if you're feeling generous, you can buy me a coffee by clicking on the link below. Any coffees bought are greatly appreciated and you'll have your name in the credits of all future videos. www.buymeacoff.ee/dabdiy. Don’t forget to follow my sponsor, TSA Performance on Instagram @tsaperformance for everything you’ll need to make your 1KR engine perform as it should. Visit Form 7 Performance (www.form7performance.co.uk & @form7performance) for your after market parts. Thousands of parts across hundreds of brands and make sure to use discount code ‘dabdiy’ for a discount at checkout.