Hello, you need to get the computer with the same exact part number as your original computer. Otherwise it will not work. Different computers got different part numbers to them which means that they have different hardware as well and you will not be able to program it.
I have a 96 Tacoma 2WD V6 that stalls in all driving gears and we couldnʻt get any codes to read. Took it to the Transmission shop and found out my truck computer is getting corroded. They are cleaning it up right now but I need to find a new computer ASAP. How is your Tacoma doing?
I touched me alternator wire on the side of the motor when i was replacing it. Now the truck turns over but wont start. No spark and im thinking i screwed up the computer. 😢 wjats it cost to get it fixed or who doni need to talk too. Need some direction to get my tota going again. Its a 1993 toyota pickup 4x4 22re. Thanks for your info.
Can the ecu on a 1991 Toyota 3.0 manual transmission be repaired. Idles rough and the check engine light has been on . No mechanic can fix it. 1 owner for 32 years. Getting worse every year.
My 1997 Camry 2.2 liter auto trans just quit pulling just going down the road. Now is always not pulling in any gear. Tranny solenoids test fine. Can this be a computer problem ?
Mine is starting, but it starts running bad and shutting off at a stop. When it is running bad it also won't go into overdrive and I can hear something clicking in the dash. But when the Check Engine light comes on it starts running perfect. My mechanic told me today that it's the computer. Does that sound right?
I have a 93 toyota pickup and it will run for just a second or two and then die. Ran diagnostic and gor error codes 12, 13, 14 and 42. ECM was invovled in all error codes. Is this posible to fix?
I'm having a charging system problem with my 98 Lexus Gs300, car runs at 11.8 volts. Tried replacing alternator and battery, checked ground/wires/fuses. Any chance my ECU isn't letting my alternator charge and rpm gauge not working, also I've tried swapping clusters but no change to anything, help please
I have a 1993 Toyota Hilux Surf auto. When I get to 55 mph my rev counter should go back to approx 2,000 revs. It's not doing this and getting high revs in relation to speed. The first 2 changes of gear work fine in the lower speeds. It's just the 55 mph stage. Would this be an ECU problem.?. Thankyou
Hello, 99% of such problems only happens because of the ecu. The only way to check it is by opening the ecu and testing the software, contact sales@ecuteam.com for more info if you want your ecu to be tested.
Hi ECU Team! I saw burnt resistor on RSC in the ECU. My 1996 model corolla has high idle at 2000 rpm during cold start. Do you think replacing the resistor with new will solve this high rpm problem?
Hello, we experienced such a conversion before and it requires time and knowledge. Our job was successful and if you want to proceed with this process, contact our representatives at sales@ecuteam.com
we have a land cruiser prado 2LTE 70 series . the engine starts then rev high then shuts off . we changed the ecu with the same part number then it runs well . what should i do to the old ecu??
I have a 1992 Toyota 4runner and I had ordered a used engine but the ECU is routed to the driver side of the engine, also vacuum rails are different, does anyone know why or what this engine is?
Hello! Send us the ECU and we'll test it. If it's bad, we'll get it fixed for you. Please, follow easy steps following this link: ecuteam.com/service-request/
I got 1989 pick up I try 7 modules and all comes same problem , code 27 without starting the eng is this normal , computers don’t allowed me to reset it IS THIS NORMAL OR IM WRONG ?
I had a 2003 toyota sequioa 4.7l were it will cranked up but will not start sometimes intermittent will start whenever feels like it, I took it to few mechanics after i did research on this issue thru u tube and my instinct is telling me either transponder w/c sends signal to immobilizer ECU, ecu will recogniced the signal knowing that the transponder is recogniced and will start. please advise. than you. TED
my 1994 Toyota Pickup OEM ECU failed in 2016, replaced with remanufactured ECU from rockauto and worked fine until 2022 this ECU failed again with code 42 but code disappears. replaced with another remanufactured ECU. Truck started operated normally after 10km same thing happened engine just shuts off and reading code 42 again. Truck wont start, no codes or check engine light.
@@zakklee2556 gna redo dry/wet compression test and do a leak down test as well. Still some test and inspectioni need to do. I been so busy these past months.
Please help...!!! 1997 toyota corolla 4afe in south africa car starts up fine and when idle drop to 1000rpm it switches off checked everything you can think of...it must be an ecu fault car simply wont idle below 1000 rpm something switches off the injectors and fuel exactly at 1000 rpm car drives fine if kept above 1000rpm..what could cause that? Please please please help im out of options relpaced various sensors tested battery and alternator i must mention after market alarm was disconnected but car drove fine for 3 months without any issue...please please please help..can it be a relay...? But why exactly at 1000rpm car would switch off note...! Itdoes stall it switches off also when pulling away....
1991 Camry 2.0l 2wd DX . Started fine until changed fuel filter and pulled the efi fuse to crank and relieve fuel pressure . BUT..I forgot to pull the battery cable when pulled fuse 2 x and now cranks but no start no check engine light .💢Did I just kill the cpu? 🤬
Check your ground and fuse and if it is fine then send your module to us for testing and we will be able to identify the issue with the ECM. Visit ecuteam.com/ for more info.
Welcome please help. How can I start a Toyota Tacoma 3rz engine on a mind or a 2rz ECU controller, how do I start the engine, how to connect the wires, and what is important for the operating wires. 
Hello, what is the year of 2rz and 3rz, for all the connections you will need schemes, for further details get in touch with our representatives at www.ecuteam.com
Thanks for this ntel but please can you help me my car emits black smoke when warm it a 1998 Toyota Corolla I have replaced the black switch severally but it still viberate and emits black smoke please help me
I own a toyota Landcruiser Prado from Japan 1KZ-TE 4 cyl diesel . Sometimes the glowplugs don't come on. . The engine cranks but won't start because the glowplugs are not getting power. Is this a problem usually related to the ECU?
For my 1996 Hilux surf I had the same issue and for me it was the ecu. Replaced the glow plugs first because well cheap and easy. The replaced the ECU and no further problem. The new glow plugs didn't help however the old glow plugs 2 were bad.
@@nonenone5023 My problem turned out to be corrosion in the ECU, and not glow plug related. I should have noticed the engine light wasn't coming on either, which would have shown me it wasn't a glow plug issue.
I had this problem on my 1990 4Runner. It wasn't the fuel pump it wasn't the electrical it turned out to be knock sensor bad.. it would not send a signal to the ECM to allow the vehicle to start
Hello! Sure, not a problem, contact us here and send it over to our facility, we'll take care of it: ecuteam.com/toyota-auto-computers/toyota-ecu-ecm-module/
I have 2003 Toyota Corolla le when I plug my obd2 scanner it’s says linking error I tried 2 different obd2 scanner still shows error what could be the problem please help me is there any problem with engine computer module?
Hello! If there is NO communication to the ECU, but you are able to talk to other modules, it's the ECU problem. We can test this for you, just get in touch with us. Thank you!
@kenowillie. What was the issue with your 95 Tacoma? I have a 95 also that all of a sudden ran rough and died, will not start 99% of time but sometimes will start and only idle for a few min then dies.
@@ECUTeamCorp I currently have a dead ECU on a Toyota RAV4 (no start) and it took me about 10 seconds to realize it was dead when it wouldn't talk to my OBD scanner.
I have a 96 Toyota Tacoma 2.4 how much is a computer for that two Wheels. What type of yr. Toyota's could I use that type of computer on my truck
Hello, you need to get the computer with the same exact part number as your original computer. Otherwise it will not work. Different computers got different part numbers to them which means that they have different hardware as well and you will not be able to program it.
I have a 96 Tacoma 2WD V6 that stalls in all driving gears and we couldnʻt get any codes to read. Took it to the Transmission shop and found out my truck computer is getting corroded. They are cleaning it up right now but I need to find a new computer ASAP. How is your Tacoma doing?
Hi, do you repair 1kz-te 3.0d ecu? Mine seems to not be operating the timing control valve on the pump. Thanka Greg
Hello Greg, Yes we repair these ECUs. Contact me at sales@ecuteam.com
I touched me alternator wire on the side of the motor when i was replacing it. Now the truck turns over but wont start. No spark and im thinking i screwed up the computer. 😢 wjats it cost to get it fixed or who doni need to talk too. Need some direction to get my tota going again. Its a 1993 toyota pickup 4x4 22re. Thanks for your info.
Tel: +1(888)-541-6025
WhatsApp: +1(561)-385-5843
E-mail: sales@ecuteam.com
WEB: ecuteam.com
Can the ecu on a 1991 Toyota 3.0 manual transmission be repaired. Idles rough and the check engine light has been on . No mechanic can fix it. 1 owner for 32 years. Getting worse every year.
Contact us:
Tel: +1(888)-541-6025
WhatsApp: +1(561)-385-5843
E-mail: sales@ecuteam.com
My 1997 Camry 2.2 liter auto trans just quit pulling just going down the road. Now is always not pulling in any gear. Tranny solenoids test fine. Can this be a computer problem ?
contact
Tel: +1(888)-541-6025
WhatsApp: +1(561)-385-5843
E-mail: sales@ecuteam.com
Mine is starting, but it starts running bad and shutting off at a stop. When it is running bad it also won't go into overdrive and I can hear something clicking in the dash. But when the Check Engine light comes on it starts running perfect. My mechanic told me today that it's the computer. Does that sound right?
you can send in the ECU and we can test it for you, contact sales@ecuteam.com
I have a 93 toyota pickup and it will run for just a second or two and then die. Ran diagnostic and gor error codes 12, 13, 14 and 42. ECM was invovled in all error codes. Is this posible to fix?
Yes, please contact us directly and send your module to us
I'm having a charging system problem with my 98 Lexus Gs300, car runs at 11.8 volts. Tried replacing alternator and battery, checked ground/wires/fuses. Any chance my ECU isn't letting my alternator charge and rpm gauge not working, also I've tried swapping clusters but no change to anything, help please
ECU Must be checked out, contact sales@ecuteam.com for more info.
I need some advice my brother Tacoma 2rz Toyota not shifting gear
Is it a hard shift or just not moving in the gear at all?
I have a 1993 Toyota Hilux Surf auto. When I get to 55 mph my rev counter should go back to approx 2,000 revs. It's not doing this and getting high revs in relation to speed. The first 2 changes of gear work fine in the lower speeds. It's just the 55 mph stage. Would this be an ECU problem.?. Thankyou
Hello, It can be the ECU for sure, you must understand that if it is the original computer it is 30+ years old with no service
Please help me out. How can I test everything in the computer with multimeter
Tel: +1(888)-541-6025
WhatsApp: +1(561)-385-5843
E-mail: sales@ecuteam.com
This happens with 4Runners, I have one. Shut down when running and won’t start, fuel pump doesn’t sound activating and have no spark.
Tel: +1(888)-541-6025
WhatsApp: +1(561)-385-5843
E-mail: sales@ecuteam.com
My sins 97 t-100 is pulling a p1600 code starts seems to run ok no engine light but loses power when trying to accelerate no other codes present
Hello, 99% of such problems only happens because of the ecu. The only way to check it is by opening the ecu and testing the software, contact sales@ecuteam.com for more info if you want your ecu to be tested.
@@ECUTeamCorp di you repair?
Hi ECU Team!
I saw burnt resistor on RSC in the ECU. My 1996 model corolla has high idle at 2000 rpm during cold start. Do you think replacing the resistor with new will solve this high rpm problem?
You can try it
Can you repair Lexus vt300i
Ecu used in Toyota marine boats?
1999 ls400 marine 4.0
Hello, we experienced such a conversion before and it requires time and knowledge. Our job was successful and if you want to proceed with this process, contact our representatives at sales@ecuteam.com
we have a land cruiser prado 2LTE 70 series . the engine starts then rev high then shuts off . we changed the ecu with the same part number then it runs well . what should i do to the old ecu??
Save for part or junk it.
Is that part can be repaired better not to throw it away
Old Toyotas are classics at blowing caps on the ecu a friend of mine was pretty good at fix them on Toyotas soarer and work all the time
Caps on Toyota is Classical, you are correct :)
I have a 1992 Toyota 4runner and I had ordered a used engine but the ECU is routed to the driver side of the engine, also vacuum rails are different, does anyone know why or what this engine is?
Please be more clear about your situation, i do not quite understand.
I have a Toyota camry 1998 that was sitting for an year. The car cranks but doesn't starts. Can't figure out where the problem occurrences
Hello!
Send us the ECU and we'll test it. If it's bad, we'll get it fixed for you. Please, follow easy steps following this link: ecuteam.com/service-request/
Location for ecu in toyota hilux 2014
The ECU (Engine Control Unit) in a 2014 Toyota Hilux is typically located in the engine bay.
@@ECUTeamCorp in cabinet o outside the body?
I got 1989 pick up I try 7 modules and all comes same problem , code 27 without starting the eng is this normal , computers don’t allowed me to reset it IS THIS NORMAL OR IM WRONG ?
Where are you located
8125 Monetary Dr H7
West Palm Beach, FL 33404Tel:
+1(888)-541-6025
WhatsApp: +1(561)-385-5843
E-mail: sales@ecuteam.com
Do you guys order and ship ECU parts also?
It really really depends.
Where di I send it or get ahold of you
Visit ecuteam.com and request a quote!
I have a 4afe ecu can you bump up my rev limiter car is for of road use
Not sure.
Whats that mean can you flash them or know of programing tool/Software
I had a 2003 toyota sequioa 4.7l were it will cranked up but will not start sometimes intermittent will start whenever feels like it, I took it to few mechanics after i did research on this issue thru u tube and my instinct is telling me either transponder w/c sends signal to immobilizer ECU, ecu will recogniced the signal knowing that the transponder is recogniced and will start. please advise. than you. TED
Hello! From what it looks like, the problem is with the ECU. Send a Message to sales@ecuteam.com and we will get back with you!
my 1994 Toyota Pickup OEM ECU failed in 2016, replaced with remanufactured ECU from rockauto and worked fine until 2022 this ECU failed again with code 42 but code disappears. replaced with another remanufactured ECU. Truck started operated normally after 10km same thing happened engine just shuts off and reading code 42 again. Truck wont start, no codes or check engine light.
Contact sales@ecuteam.com for more info.
any updates ?
@@zakklee2556 gna redo dry/wet compression test and do a leak down test as well. Still some test and inspectioni need to do. I been so busy these past months.
I have a 1990 Toyota Camry. It runs terrible, stalls and is hard starting when it rains. What could this be?
This could be ECU. Make sure you scan it first.
Hi Sir, ECU in 1993 model toyota corolla gli is the same in a manual and automatic transmission?
The ECU can be the same yet the software inside of the module can be different, especially if it is manual or automatic transmission.
Please help...!!! 1997 toyota corolla 4afe in south africa car starts up fine and when idle drop to 1000rpm it switches off checked everything you can think of...it must be an ecu fault car simply wont idle below 1000 rpm something switches off the injectors and fuel exactly at 1000 rpm car drives fine if kept above 1000rpm..what could cause that? Please please please help im out of options relpaced various sensors tested battery and alternator i must mention after market alarm was disconnected but car drove fine for 3 months without any issue...please please please help..can it be a relay...? But why exactly at 1000rpm car would switch off note...! Itdoes stall it switches off also when pulling away....
You need to check your engine! Make sure you will check the injection system and the air intake. After the checking, double check!
1991 Camry 2.0l 2wd DX . Started fine until changed fuel filter and pulled the efi fuse to crank and relieve fuel pressure . BUT..I forgot to pull the battery cable when pulled fuse 2 x and now cranks but no start no check engine light .💢Did I just kill the cpu? 🤬
Check your ground and fuse and if it is fine then send your module to us for testing and we will be able to identify the issue with the ECM. Visit ecuteam.com/ for more info.
Use gloves when you do this
Welcome please help. How can I start a Toyota Tacoma 3rz engine on a mind or a 2rz ECU controller, how do I start the engine, how to connect the wires, and what is important for the operating wires.

Hello, what is the year of 2rz and 3rz, for all the connections you will need schemes, for further details get in touch with our representatives at www.ecuteam.com
٢٠٠١_٢٠٠٤
My friend did not receive the scheme Come on model 2004, please help, because my time is tight, working on it a lot, and I want to run it
I really love your job and I want to learn more about ECU repair in general it can be helpful to me in many ways. will appreciate your response
We will have a course in the future on how to check your ecu and its basic vital signs.
Thanks for this ntel but please can you help me my car emits black smoke when warm it a 1998 Toyota Corolla I have replaced the black switch severally but it still viberate and emits black smoke please help me
@@ECUTeamCorpmy lc 1kzte wont start after sitting idle for over a year. Engine cranks ok. Showing a flash code 99. Help! Ecu is a denso unit.
Could you guys do a 2000 sc300 ecu?
Yes, we repair all Toyota/Lexus ECUs. 90% of the time it is fixable.
I got those sc300 rims on my 94 camry v6 super white
I own a toyota Landcruiser Prado from Japan 1KZ-TE 4 cyl diesel . Sometimes the glowplugs don't come on. . The engine cranks but won't start because the glowplugs are not getting power. Is this a problem usually related to the ECU?
Hello, what year is your car?
@@ECUTeamCorp 1996 right hand drive automatic.
For my 1996 Hilux surf I had the same issue and for me it was the ecu. Replaced the glow plugs first because well cheap and easy. The replaced the ECU and no further problem. The new glow plugs didn't help however the old glow plugs 2 were bad.
@@nonenone5023 My problem turned out to be corrosion in the ECU, and not glow plug related. I should have noticed the engine light wasn't coming on either, which would have shown me it wasn't a glow plug issue.
@@arcticwanderer2000 hi did you repair the ecu or buy a new one. Just wondering if you can repair it
Great Sir good knowledge for everyone thanks 🙏
Thanks
This code I'm getting p1600 battery malfunction in the ECU is probably my issue with my car crappy performance 😒
You can send it over and we can check it out, email sales@ecuteam.com for more info.
is it possible to remap/reflash/tune a 1993 Toyota ECU?
Not for a 93.
1997 Toyota 4Runner. The engine will not start. Starter is good. How much do you charge to repair my ECU?
Go on our website and request a quote! ecuteam.com
I had this problem on my 1990 4Runner. It wasn't the fuel pump it wasn't the electrical it turned out to be knock sensor bad.. it would not send a signal to the ECM to allow the vehicle to start
Where is the ECU in a 98 T100
Inside of the cabin passenger side under the glovebox compartment.
How much to fix a 1998 toyota Camry ECM?
Please, get in touch with us for the quote: ecuteam.com/contact
how can I get a quote I have a 1991 4runner
Visit our website, ecuteam.com
did you contact 4 a quote
I have 1988 Toyota 4Runner. 4cylinder I need repair thanks
Visit ecuteam.com and get in touch with our representatives!
I need one of these computer. Can't get any.
Visit our shop and website, go to ecuteam.com
I want to repair two ecu's exactly same model in this video
Hello! Sure, not a problem, contact us here and send it over to our facility, we'll take care of it: ecuteam.com/toyota-auto-computers/toyota-ecu-ecm-module/
Hi guys, how do we contact you guys?
Address: 8125 Monetary Dr H 7, West Palm Beach, FL 33404
Tel: +1(888)-541-6025
WhatsApp: +1(561)-385-5843
E-mail: sales@ecuteam.com
WEB: ecuteam.com
@@ECUTeamCorp thanks guys, I may need to have a 96 Tacoma ECU fixed up,
What state and city are you?
I need help w/ my computer
We are in Florida, West Palm Beach. Here is the info: ecuteam.com/contact/
@@ECUTeamCorp how could I get toto
@@cecilcecilmitchell8578 what does it mean?
Black out pics no able to see video
That's odd, I can clearly view the video...
I have 2003 Toyota Corolla le when I plug my obd2 scanner it’s says linking error I tried 2 different obd2 scanner still shows error what could be the problem please help me is there any problem with engine computer module?
Hello! If there is NO communication to the ECU, but you are able to talk to other modules, it's the ECU problem. We can test this for you, just get in touch with us. Thank you!
Hope you can help me 😔😔😔
Hope so as well. Sales@ecuteam.com describe your problem over there.
What's the cost to repair a 95 Toyota tacoma computer?
Visit ecuteam.com and connect with our representatives, they will guide you
@kenowillie. What was the issue with your 95 Tacoma? I have a 95 also that all of a sudden ran rough and died, will not start 99% of time but sometimes will start and only idle for a few min then dies.
@@jmaverick did you find out the problem?
@@jesuscastro6687 I never did, I finally got fed up with it random failing that I sold the truck
Really? The customer went to the dealership for a no-start and the dealership didn't know it was a dead ECU?
Can you imagine? It happens so often that it's not a surprise for us any longer.
@@ECUTeamCorp I currently have a dead ECU on a Toyota RAV4 (no start) and it took me about 10 seconds to realize it was dead when it wouldn't talk to my OBD scanner.
@@rickpontificates3406 toyota 89-95 for not hookup to scanners. they are pre scanner technology.
@@zakklee2556 They're pre-OBD, but I believe they had a more primitive comm system back then
i'm pretty sure this is just a two layers pcba.
good to hear but it's not
You talk to much get on with rhe auto engine.
Watch the video till the end
Hello sir for Tacoma engine V6 year 2003 SW 89663-04080 u have file bin or cuw? Thanks reply back 🔙
Hello what type of file are you looking for?