Furitek Stinger System (Micro Komodo & Lizard Pro ESC) Review, Build and Bluetooth Furicar App!

Поделиться
HTML-код
  • Опубликовано: 14 окт 2024

Комментарии • 82

  • @Rc_impulse
    @Rc_impulse 4 месяца назад +1

    I just goto be one the way to put into my Scx24 power wagon it has non existent throttle modulation out of the box. I can’t wait. Good informative video.

  • @caseys_cozy_garage
    @caseys_cozy_garage 10 месяцев назад +1

    Literally installed this setup last night. Your walkthrough of the app is entertaining and teaching me whilst im at work. Cant wait to get home and tune

  • @brianchong4134
    @brianchong4134 Год назад +3

    Thank you for the extremely in-depth view if the software settings. It's helped my decision to purchase a few sets in the future. Tidy install as well. I'm a stickler for neatness.

    • @TheShopMiniRC
      @TheShopMiniRC  Год назад

      Thanks a ton for the watch! I hope we earned your sub!

  • @timbertime738
    @timbertime738 Год назад +1

    Awesome comprehensive video man, I have ordered this combo and will be re watching your video for my install and set up

    • @TheShopMiniRC
      @TheShopMiniRC  Год назад +2

      Thanks a ton. Any questions, just reach out.

  • @wademoulton5109
    @wademoulton5109 Год назад +1

    Awesome video. Very informative. Thank you.

  • @XtrmTJ97
    @XtrmTJ97 Год назад +2

    Very informative 👏 Thank you.

    • @TheShopMiniRC
      @TheShopMiniRC  Год назад

      Glad it was helpful! I hope i earned your sub.

    • @XtrmTJ97
      @XtrmTJ97 Год назад +1

      @@TheShopMiniRC You sure did. I'm starting my Scythe/Lizard pro/Brushless built. Your videos help alot. Thanks again.

    • @TheShopMiniRC
      @TheShopMiniRC  Год назад

      @@XtrmTJ97 of course. Good luck with your build. You are gonna love it!

  • @kriscarter5440
    @kriscarter5440 Год назад +1

    Paused the video to see if a comment had been made regarding the "startup power" setting being explained. 😔
    Great videos sir!

    • @TheShopMiniRC
      @TheShopMiniRC  Год назад +1

      Not yet. :( we still Donno exactly what startup power is.

    • @macharleys72
      @macharleys72 9 месяцев назад

      @@TheShopMiniRC Has it ever been defined yet?

    • @TheShopMiniRC
      @TheShopMiniRC  9 месяцев назад

      @@macharleys72 only thing I can tell is essentially if you have too much power on the low end of your throttle you can turn it up or down if you don't feel it has enough. It definitely more of a personal preference you will have to play with it.

  • @giopirmisashvili5514
    @giopirmisashvili5514 8 месяцев назад +1

    Thank you

  • @lgrc6120
    @lgrc6120 2 года назад +1

    I enjoy lots of ur stuff 👍

  • @WarrenAlmeda-wg4nr
    @WarrenAlmeda-wg4nr Год назад +1

    Very informative videos! Just purchased the Komodo brushless with the fcx24 transmission. The plugs are not matching up with the the stock Ecs. Do I need a new ecs lizard pro?

    • @TheShopMiniRC
      @TheShopMiniRC  Год назад +2

      if you are going to a brushless you can not use the stock ESC or RX.. sorry. You will have to get a new ESC AND Receiver/Transmitter to go brushless on most small scale ready to run RCs.

    • @keldonator
      @keldonator Год назад

      New furitek RTR is a great brushless deal at $200

  • @DadsRCGaragePNW
    @DadsRCGaragePNW 2 года назад +2

    Drag brake is when going down hill the motor will slow roll downhill without any input from throttle. great for controlled downhills

    • @TheShopMiniRC
      @TheShopMiniRC  2 года назад +2

      Yes it is. It also prevents the truck from rolling backwards.

    • @XtrmTJ97
      @XtrmTJ97 Год назад +1

      Do you want/need drag brakes with worm gears?

    • @TheShopMiniRC
      @TheShopMiniRC  Год назад +1

      @@XtrmTJ97 no

  • @mtrccrawler6300
    @mtrccrawler6300 2 года назад +1

    Great videos!!👍👍💪💪🤙✌️✌️

  • @QuinnsRC
    @QuinnsRC 2 года назад +1

    Awesome detailed video; I hope to someday build a 1/24 rock bouncer, and the stinger system is the system on my list. Can I ask what camera you're using? My GoPro just won't focus on anything close.

  • @toycoma98
    @toycoma98 2 года назад +1

    Cool video, I'm glad i got the lizard pro and not igmelon combo. Could i use the stock transmission with the furitek motor mount? Is the micro komodo pinion compatible with the stock spur?

    • @TheShopMiniRC
      @TheShopMiniRC  2 года назад

      yes the pinion and spur gear should mesh just fine!

  • @josephjohnson2914
    @josephjohnson2914 Месяц назад +1

    Do you coat both sides of the board with coating? Just not where you plug this into the esc right?

    • @TheShopMiniRC
      @TheShopMiniRC  Месяц назад +1

      You coat both sides of the board. You Do not coat the pins. (Otherwise it won’t conduct current to the wire you plug in)

    • @josephjohnson2914
      @josephjohnson2914 Месяц назад

      @@TheShopMiniRC ty for the response!! One last question. Where did you mount the Bluetooth module?

    • @TheShopMiniRC
      @TheShopMiniRC  Месяц назад +1

      @@josephjohnson2914 usually just right on the esc

    • @josephjohnson2914
      @josephjohnson2914 Месяц назад +1

      @@TheShopMiniRC preciate it brotha!! 🏴‍☠️🤙

  • @eaSports1990
    @eaSports1990 Год назад

    I've watched a few videos regarding this set up. I have the Lizard pro ESC on the way and the Motor/Transmission from furitek on deck for my scx24 Bronco. I've heard there were Binding issues with the ESC. Have you encountered any problems relating to that?? Btw I am going to switch out my stock receiver with a SPMSR215 along with a new Radio from spectrum.

    • @TheShopMiniRC
      @TheShopMiniRC  Год назад

      Never had a binding issue with the esc. (If you mean setting your end points, because you don’t bind you the esc, only the receiver.)

  • @phoenixrising4573
    @phoenixrising4573 Год назад +1

    the OGRC transmission isn't available right now...other recommendations?
    Also curious, why not use a smaller receiver?

    • @TheShopMiniRC
      @TheShopMiniRC  Год назад +1

      It’s just the rx I had. As for other transmission, check out our most recent video on the overdrive ali express trans!!

    • @phoenixrising4573
      @phoenixrising4573 Год назад

      @@TheShopMiniRC so that may have come off as snarky, I tend to do that. I thought you might have a specific reason for using that one and was curious! I've run the big stuff for years, but my only foray into sub 16th scale ground vehicles has been the 1/28(27...whatever) 2wd cars.
      I wish the micro esc manufacturers would include sbus connections for a servo! Then we could use the little postage stamp size receivers :-)

    • @TheShopMiniRC
      @TheShopMiniRC  Год назад +1

      @@phoenixrising4573 if you check most of my other builds, they all use smaller rx. My monster truck uses the micro mini z /1:28 rx. I have seen some of the micro rx come with a normal servo to the tiny sbus type connector. Also, not snarky at all. ;)

  • @quentinsilas5912
    @quentinsilas5912 Год назад

    My power wagon cogs when trying to slow crawl up over a rock etc. it slow craws on flat surface perfectly but trying to climb I have to really work the throttle

    • @TheShopMiniRC
      @TheShopMiniRC  Год назад

      Try making more adjustments to the app. FOC and Slow Speed will affect a lot.

    • @quentinsilas5912
      @quentinsilas5912 Год назад +1

      Do you think the mini komoto is struggling to slow craw because it don’t have as much torque? Or tuning is the problem

    • @TheShopMiniRC
      @TheShopMiniRC  Год назад

      It could be foc. Is the truck super heavy? The micro komodo usually has plenty of torque. Enough to snap axles.

  • @bugzfpv6322
    @bugzfpv6322 Год назад +1

    do you know how to change the creep to crawl from 20% power? I've adjusted the curve all i can and i just want the creep to ramp a little higher before it switches to crawl. thx

  • @PapaJohn_1021
    @PapaJohn_1021 4 месяца назад +1

    What chassis is that?

    • @TheShopMiniRC
      @TheShopMiniRC  4 месяца назад +1

      The link is down in the description. I went ahead and copied it here for you.
      OGRC Carbon Fiber SCX24 Angled Skid Chassis: amzn.to/3Q0CuzM

  • @HEAMTB
    @HEAMTB 6 месяцев назад +1

    I ordered one of these and it didn’t come with the Bluetooth module the lizard pro came in a black case what happened??

    • @TheShopMiniRC
      @TheShopMiniRC  6 месяцев назад

      the bluetooth module on newer lizard pros is built in. Turn it on and see if it shows in the app!

    • @HEAMTB
      @HEAMTB 6 месяцев назад +1

      @@TheShopMiniRC oh,thank you !

    • @HEAMTB
      @HEAMTB 6 месяцев назад +1

      @@TheShopMiniRC I also have one more question now I get everything turned on then my stock esc blinks what do I do then? There is power to the motor and steering how do I get it to stop blinking?

    • @TheShopMiniRC
      @TheShopMiniRC  6 месяцев назад

      @@HEAMTB you can’t make it stop blinking :(

    • @HEAMTB
      @HEAMTB 6 месяцев назад +1

      @@TheShopMiniRC that stinks

  • @hellofromsoutheastalaskarc7517
    @hellofromsoutheastalaskarc7517 2 года назад

    Hello from southeast alaska how's it going today ken

    • @TheShopMiniRC
      @TheShopMiniRC  2 года назад

      its a beautiful day! I hope the same is true for you!

  • @juansoto9614
    @juansoto9614 3 месяца назад +1

    Oem scx24 reciver?

    • @TheShopMiniRC
      @TheShopMiniRC  2 месяца назад +1

      You can as long as it’s not the blue one.

  • @Hannsom7
    @Hannsom7 Год назад

    so i bought (pancake) komodo and stellar trans. im not trusting myself with soldering. what do you think i should buy to make it all work with my scx24.

    • @TheShopMiniRC
      @TheShopMiniRC  Год назад +1

      the lizard pro or ultimate requires no soldering.

    • @Hannsom7
      @Hannsom7 Год назад

      So if I get the ultimate will I need a new receiver or anything

    • @TheShopMiniRC
      @TheShopMiniRC  Год назад

      @@Hannsom7 if you have a v1 rx you can just plug it into channel 2. If you have a v2 (blue) rx, it won’t work at all. You would need a new remote and receiver.

    • @Hannsom7
      @Hannsom7 Год назад

      Yeah I got the v1 black label I got the scx24 c10

  • @spiriks161
    @spiriks161 Год назад +2

    drag brake wont work on worm gears

    • @TheShopMiniRC
      @TheShopMiniRC  Год назад

      The worm gear is the drag brake and the stage brake should still work to slow down the rig even more. But yes, the worm gears basically have more brake than the motor will. It also depends a lot on the ratio.

  • @Hannsom7
    @Hannsom7 Год назад

    do you know if the pancake from mofo has a app like this?

    • @TheShopMiniRC
      @TheShopMiniRC  Год назад +1

      The app is for the speed control, not the motor.

  • @lgrc6120
    @lgrc6120 2 года назад +1

    Confused furitek USA? Is that to make Americans happier about buying Chinese.
    I thought furitek was from Singapore but made in China

    • @TheShopMiniRC
      @TheShopMiniRC  2 года назад +2

      I think furitek USA just sells what is warehoused in the US.

    • @DadsRCGaragePNW
      @DadsRCGaragePNW 2 года назад +2

      Furitek is located in Vietnam so not really Chinese

    • @lgrc6120
      @lgrc6120 2 года назад +1

      @@DadsRCGaragePNW haha see the big CE on the micro Komodo means made in China
      Apparently the Rock bouncer chassis is hand welded in yeah maybe it's Vietnam

    • @TheShopMiniRC
      @TheShopMiniRC  2 года назад

      @@DadsRCGaragePNW 100%

    • @keldonator
      @keldonator Год назад

      Not much different than majority of American stuff. Made in China assembled in the USA. That way they can put a made in the USA sticker on it.