I just bought a scx24 JLU. Been watching your videos man and grateful for em. You've got me steeping through the door into this hobby. Thanks for your effort making these videos and all dude very informative.
So good to hear! Glad you’re enjoying them and the hobby as well. Definitely let me know if you need help with anything. I’ll try my best. Really appreciate the comment 🙏
Awesome! Bought a used rig and one of the batteries included had janky wiring and blew up the esc in smoke only the steering works and my stock motor just stopped working he included another stock motor but I swapped it to find it was dead as well so I found a esc and Injora brushed motor combo for only $12 this helped me understand what to do thanks mate!
If you don’t know already. The app is called FuriCar. I believe the password is 1234. I covered it in another video but just Download it and make sure your Bluetooth dongle is plugged into the esc. Turn on the truck and then open the app. It’ll recognize the truck, click on it and you’re connected! Fairly simple but I’ve been warned that it isn’t coming with instructions so hopefully this helps!
Please help I just got this all assembled and now it’s acting very jerky with a surpass motor. I have it set to brushless no my wheel nuts are not too tight. Nothing is hitting the motor on the outside. I have a video but I don’t know how to send it to you
@@nickc6756 did you try updating the firmware? And then possibly recalibrate the throttle. If that don’t solve it then I would email Furitek about it. Could be a bad board.
@@blazinghillie hmmm have you unplugged and replaced the Bluetooth module? Maybe shut your phone or device completely off and back on. I’ve also sometimes did a rebind on my controller to my receiver and it worked. Not sure why that has anything to do with it but it’s worked for me before. If none of that works I would contact Furitek and let them know of the issue. They can either help or maybe replace the unit.
Could u do a quick video on ur throttle curve setting. Possibly on what exactly the other settings do. Tekin has a good explanation in u touch & hold the name of each adjustment on the RX4.
Well done vid once again. I can't wait for Furitek to ship mine out. I'm sitting on the surpass, an extra front axle/servo assembly, and a 4 link conversion that I'm trying to wait to mess with...
@@pblabrat07 I made a set of high-clearance links out of aluminum ball joints and brass rods. I bought 2 "SCX24 4 Link Emax Servo Tray"s from Bang RC. I'm eventually going to have 4WS, hence why I bought 2 and really wanted to eliminate the Y-links.
Got to test mine out yesterday Sunday at my event I love it it is awesome, bummed that I can’t plug my LEDs into it got to have my lights for my night runs, I will be picking up a couple more of the ones that you can plug LEDs in the waterproof and in casing now that’s what I thought I ordered, they got the lizard don’t matterIt is a great product I will be getting more appreciate as always you sharing love your videos until the next one
I just burned up my esc today... only goes in reverse. It sucks that these are out of stock. I might just have buy the replacement esc just to get me by.
Love your channel, was hoping you could post a video about the esc setting you use. Bought the Lizard and really like the functionality, bit im having issues figuring out the throttle curve. Please and thank you, you rock!!!!!
Would you consider doing a quick view on how the lizard does with a barrage motor? It’s better than the stock motor but it’s not brushless as you know so I’m wondering if it’s even better than with the stock motor
Yeah I’ll try to throw one together. If you wanna check my video titled Best scx24 esc at about the 20 min mark I have the tegu in my truck with a barrage. The lizard runs just the same as it honestly.
I finally got the app but it will not bind I’ve talked with the owner, the red dot just keeps going back-and-forth I’m thinking the Bluetooth ain’tWorking
@@jessesommer7971 I got mine to work. I had to click on the little car picture and then it asked for a password. Password was on the instruction page. I think it was 1234
@@MrMrsregor I seen that. I'll give it a try. The second try, it took off and bound up on a blanket. The pinion spun on the motor shaft and now I have that issue. 0.5 mod should be here in a day or so. I will give this a try. Thank you so much for your help!
🖐️🤠 FuriTek has re-opened their 2nd round for placing Pre-orders. You'll have to check which options as it seems two of the dedicated brushless units are not available to preorder. We only noticed as we checked on how our pre-order was progressing along. Good luck 🤞 Cheers from 🇬🇧
@@rhm9178 thanks buddy I ordered two lizards my only issue is I have three rigs! 😝 Can't wait to sample that smooth modulating 👍 tbh my rig is very jittery with the mudslingers an all the brass mods installed hopefully shipping won't take too long to the UK🇬🇧
@@lnpxw20 Good on you placing a pre-order. Did you order the lizard bundle which comes with the Bluetooth module? Thanks on hoping for us not taking too long to receive here 🇬🇧 We are use to it over here so patience is a prerequisite for us all here; not to mention the sting waiting us with import & customs duties, and on top of that the courier's handling fee. We get hit hard here 😖 Cheers
Thanks for the video, I just received my furitek lizard today, for some reason its not bypassing the esc, the stock esc has to be plugged into the battery otherwise there is no power. Any suggestions?
Thanks for the video! I'm still having some trouble and hope you can steer me in the right direction. I just installed the Furitek Komodo and Tegu on my scx24, still running stock receiver. When I plug everything up I have steering but no throttle, forward or reverse. The Tegu is blinking like I can not get it to bind. What step am I missing or have I done something wrong? Thanks!
Do you have a recommend entry level radio and receivers you like? Just getting into it but im piecing it together as i can, your videos like these help alot.
Hello, I am new to the hobby, your channel is awesome! I just purchased the Furitek sc24 brushless motor. Can I run the motor without the lizard, or should I want until I can get the lizard? Thank you.
I was hoping to put a a Tegu or a lizard in my scx24 stock setup, then I found out that the lizard ESC comes default in brushless. I don't have Bluetooth nor do I have a smartphone. So I guess that means no lizard for my scx24. No manual switch on esc? ☹
Depends on the build. Tegu if I wanted 3s in it and lizard if trying to save space. That’s how I would choose anyway. They both are super smooth so no difference there really. Hope that helps!
@@EXPIOWA yes. You need to make sure you purchase one with the Bluetooth dongle included or pick one up with them though because some don’t come with them and then you can’t change any settings.
Would either of these work on the Panda hobby? I'm trying to upgrade my son's so we can compare a fully upgraded to a stock. Thanks for the your videos, they're awesome.
Yeah I have a video of me trying it in my panda. Helps a bit. The gearing on that truck limits its slow crawl but it’s much quieter for sure with the Furitek!
I would say definitely wheels and tires with weights in at least the front wheels. I try to keep the truck 60% weight in the front 40% to the rear. Tires make the biggest difference in performance straight away. Servo will be next because the stock servo is just kinda weak especially after adding some weight and better grip. When doing the steering servo I would do the steering links with the hot racing links. Much less slop in the steering with those. After that it comes down to how smooth you want the throttle to be. I would possibly go for the Furitek esc next or if you feel stock is smooth enough for your driving you can continue from there with whatever you like. Those main things will make a HUGE difference in the truck though!
Awesome channel and thanks for the vid! I hooked my Furitek up and only have steering working but absolutely no motor output. Set to brushed mode in app and tried on two different motors Any help appreciated thanks!!!
Did you make sure it’s been updated to the latest firmware? Also calibrate the throttle through the app? That’s about all I know. If that don’t help I’d definitely contact Furitek and they’ll take care of ya I’m sure. Hope that helps!
I can't get mine to connect with the throttle. I can steer it and work the lights just can't get it to move. Any ideas. I got the first style you showed. Without the Bluetooth attachment and the brushless motor that came with it.
Tried to install a Lizard Pro with a brushed Ox motor. Slow crawl is ok but full throttle cuts out. Just falls flat on it's face. I calibrated several times, switched radios and even tried it in a different rig. Is there anything else I can try before I return it?
Wow 2FM RC We just noticed your Furitek promo code in your description area; real shame 😩 as we could of saved 10% on the bundle we pre-order; Especially when global UPS shipping cost $19 Every little bit helps these days ☺️
MATT, MY STUFF JUST COME IN. A LITTLE CONFUSED, GOT THE LIZARD. THOUGHT IT WOULD COME WITH THE BLUE TOOTH TOGGLE. NEED TO GET SEPRATE? HOW CAN I GET A HOLD YOU, I DONT HAVE ANY SOCIAL MEDIA AT ALL. THX BEST REGARDS.
Yeah you have to either buy the one with the Bluetooth dongle or purchase it separate. I’m not sure if they have any in stock but they should be in their site. furitek.com/collections/all
@@2fmrc just got out of the site they are all sold out. Hahaha too bad I'll have to keep an eye out when they do get them up for sale once again. Thx a bunch appreciate it very much. Rock n Roll 🤘🏻
My esc/receiver went out recently on my scx24 and there on back order every where is there anything else I could buy that would work with my stock transmitter ? The whole esc and receiver combo is garbage and I need a new set up with out saughtering and buying new cables ? Thanks
We had some issues with the first esc I tested. They are working on a 2nd version now and hopefully I’ll be getting it soon because my kyosho is just sitting and waiting lol
installed lizard. changed to brush truck ran fine. turned esc off. next day battery voltage = 1.1 volts. furitek says unplug battery after use. do you? I thought off was off. never did this with stock setup.
I’ve always unplugged my batteries. Lots of the 1/10 escs drain the battery even while in the off position so I’ve always made it a habit to unplug the battery when finished. I also don’t ever leave the batteries in the truck anymore. Never know when they may crap out. Rather them not burn the truck up with them if they do lol
Thank you sir. This is the answer to my question relating to running on stock motor. My Lizard is on its way via UPS and due to be delivered tomorrow... Furitek are great regarding communications and keeping you updated at every step... Looking forward to more of your informative vids... Lighting now much better BTW.. Thank you ...
I got 2 coming and I was wondering does it tell you how to get the app for my phone installed it looks difficult to program I'm not the brightest bulb in the box
Recently getting into the mini crawlers, would you recommend this for the WPL C24-1 -KM with the 370 motor? Just wondering if it might work with that Receiver/transmitter? do you know a model/ part# of a 3S that would fit in the C24?
I would think so. I’ll have to test that. I’m not running any leds on mine. The stock receiver is still getting power so I would think it should still run the leds.
@@2fmrc thanks for always responding and having great content man I really appreciate it. I’m new to the hobby and there’s a lot to learn. Seems like the lizard would be a good upgrade since I don’t want to get to involved with the motor yet .
Hey Matt! I have a crazy question. Received the Furitek a couple months back and everything works great, but my transmitter doesn't see the esc. Everything works it just doesn't recognize it and makes crazy ass beeps at me the whole time. Have u experienced this?
@@2fmrc yep its seems. I try to improve my Carisma with a minimal budget, but its not easy. Not mutch aftermarket parts available for this little dudette. May give it a try someday. Thanks
So the sidewinder micro 2 is available for purchase right but the furitek isn’t. Do you think I should wait for the furitek or just buy the micro2? I’m going with the surpass!
Wel Furitek is shipping now. They sold all of the preorders but should have more available soon hopefully. Kinda up to you on how long you wanna wait. The Furitek is better IMO but the sidewinder is very good also!
@ 2FMRC - You just saved me 20 bucks on 3 Lizards! :) Going to try them on stock electronics, but sounds like for LEDs I will need a multichannel receiver w/ transmitter. The Tegu having LED ports only would matter if running it off the stock ECS/Receiver - it sounds like (...those LED ports on the stock ESC would not output when hooked up to the Tegu or Lizard as the ESC I'm guessing.) Seems like if you have your own receiver with LED outs, a Lizard is all you ever need? (except for running 3S). --Has anyone tested this? If stock ESC/Reciever LED outs work with a Lizard or Tegu plugged in as the ESC?
Awesome! $20 is great!!! I’ve not really tested the leds On them as I kinda figured if I wanted the leds I’d rather run them on my receiver and have the ability to turn them on/off with a switch on the controller etc. I don’t think I even have lights on any of mine anymore lol. I still have some lights. Maybe I’ll hook them up and see how they work. Imo like you said unless you just feel you have to run 3s the lizard is the way to go!
Something this size. As long as they say rare earth magnets around that size you should be good. Hobby Lobby and harbor freight also have them sometimes. Sometimes they only have some that are a bit smaller but they work. Here’s the ones I use most www.ebay.com/itm/12-100-500pcs-12mm-x-3mm-1-2-x-1-8-N52-Strong-Rare-Earth-Neodymium-Magnet-Disc-/302030262749?_trksid=p2349624.m46890.l49292
Someone may have asked or you may have said it in the video but if you buy the lizard pro 2 kit with the brushless motor do you have to swap receivers or will the stock one still work I'd like ro get one but don't want to buy a new receiver just yet since I only have 1 truck right now
The stock one will work with it as long as it’s the original esc/receiver. The new version that’s blue on top won’t work with it because it don’t have a ch2 port on the esc itself.
Got it going, I push that little black button on the controller turned it on so it must be on and off switch I didn’t know, but I figure I push it it came on, now trying to get the app because it is set at brushless I need brush
Just received my furitek in the mail couple weeks ago, it has a 3 pin jst and most motors have a 2 pin jst. So did u just solder or buy an adapter. If bought do u have a link? Please.
For the brushed motors with 2 pins I just plug the 2 into the 3 on the one side. Leaving one pin open. On the brushless motors you’ll use the 3 wire connector that comes with it.
Got one 2 months ago the tegu and it’s not working today I got vids on RUclips it’s was working awesome but today it gave out can u give me some feedback on what it could be
Hmmm if it was working fine and then just stopped it almost has to be the esc died or something. I’d definitely contact Furitek about it. Did you try a couple different batteries to make sure that wasn’t an issue? That’s about all I know it could be. Will it power on at all? Maybe try to update or recalibrate if so.
Hey thanks for answering back. Yeah did try my other batteries I put 2 vids up showing it turns on but when I hit the throttle nothing ,then I did it with the stock esc and works like normal so I thought maybe it burn out but it’s never gave me a problem…& it’s was working awesome all my vids…more upset cause I’m trying to get on this competition scx24 they got going where I live next month & that was part of my secret weapon… thanks 🙏 again I appreciate it thought maybe furitek would have got back to me… again thanks 🙏💯👌🏽👍🏽🤙🏽✌🏽
Yes I finally got it works great, talk to the owner just didn’t know how to get the app, get to test it out yesterday at one of my events and it is sweet love to slow crawl, just got to learn some adjustments, like the throttle curve and such, running the barrage motor right now. It wouldn’t bind at first the next day I tried it again and it banded.
@@MrMrsregor you got the app, mine wouldn’t bind at first, the next day I tried it again and it finally hooked up, when that red dot is going back-and-forth touch the little car that showing, and it gets bigger then the red dot will pick it up, mine wouldn’t at first but then it did only thing I know hope it works out I know it well it is a awesome speed controller, You’re gonna love it
I just tried to connect mine to Bluetooth and it doesn’t pick up my truck at all also my Bluetooth module didn’t have an antenna on it do you think this may be the problem?
Could be. All of mine have had the antenna. Try to power off everything and maybe reinstall the app. Then try again. If that don’t work I’d contact Furitek and let them know about it. They may have to replace the Bluetooth module.
Could you mount the motor towards the back of the truck if wanted too ? Run the Toyota body and don’t know how I’m gonna mount it and run the yota body
Yes. I run my motors however fits the build usually. You can actually just switch the motor direction in the Furitek app so no wire swapping or anything needed. Just flip the motor and trans however ya need!
@@AwokenBMX no prob! I mean it kinda depends what chassis you’re running and motor as to whether they will fit well but you can work with most any of them and make them work either way. Let me know if ya need anything else!
@@AwokenBMX Hey I had to check out your vids and love them. I rode bmx from the time I was around 13 until around 30. Very off and on from my early 20s till I was old and getting hurt wasn’t fun anymore 😆. A lot of great times on the bike tho! Miss those days for sure
@@2fmrc yeah I’m all stock so Hopefully I can make it work ! And haha yeah bmx was everything for me growing up now I’m in to the bigger toys motocross and cars lol
Just got my Tegu main board. Didn't think I needed the bluetooth module.......it ships with a default setting to brushless. Is there a way to change the setting manually? Can't order just the module from Furitek Vietnam anymore, just Furitek USA and the discount code doesn't work. Do I wait for the back-ordered module or do I order a brushless motor and hope that I dont need to tune it with the bluetooth module and App?
Yeah you definitely need the Bluetooth module for any tuning. As far as whether to wait or not that’s kinda up to how long you wanna wait. I honestly have no idea when they plan to have more or ship. I would email them and try to get one ASAP. Let them know that you didn’t know you had to have it when ordering and maybe they’ll rush ya one 👍
I want to do a brushless system in my scx24 so it can slow crawl like your surpass outrunners, but I want it to be inrunner in case of getting dirty, what motor do you recommend (I would use the FuriTek esc), and preferably a motor that has a mount my gamyrc,
Honestly the Furitek will smoothen out basically any motor you pair it with. I’d just pick the one you want and the mount and run with it. I haven’t tested many inrunners with it just because I haven’t needed any but I’ve seen them run several with the esc and it’s smooth as butter at basically any kv rating. Crazy really!
Well the tegu now runs 3s and the lizard don’t. Not sure if that could change later with a firmware update or not. The tegu also has a couple outputs like led whereas the lizard don’t. Other than that they both seem super smooth!
🖐️🤠 FuriTek has re-opened their 2nd round for placing Pre-orders. You'll have to check which options as it seems two of the dedicated brushless units are not available to preorder. We only noticed as we checked on how our pre-order was progressing along. Good luck 🤞 Cheers from 🇬🇧
Damn brother.. maybe you should use your fucking eyes and brain and maybe get on a mailing list for updates? I mean how stupid can one person be? Oh wait your here having to watch someone else do the work that makes sense
I just bought a scx24 JLU. Been watching your videos man and grateful for em. You've got me steeping through the door into this hobby. Thanks for your effort making these videos and all dude very informative.
So good to hear! Glad you’re enjoying them and the hobby as well. Definitely let me know if you need help with anything. I’ll try my best. Really appreciate the comment 🙏
@@2fmrc I should be getting my ScX soon 😁
I like the new light, it makes it much easier to see 😄👍🏻
Awesome! Bought a used rig and one of the batteries included had janky wiring and blew up the esc in smoke only the steering works and my stock motor just stopped working he included another stock motor but I swapped it to find it was dead as well so I found a esc and Injora brushed motor combo for only $12 this helped me understand what to do thanks mate!
If you don’t know already. The app is called FuriCar. I believe the password is 1234. I covered it in another video but just Download it and make sure your Bluetooth dongle is plugged into the esc. Turn on the truck and then open the app. It’ll recognize the truck, click on it and you’re connected! Fairly simple but I’ve been warned that it isn’t coming with instructions so hopefully this helps!
Please help I just got this all assembled and now it’s acting very jerky with a surpass motor. I have it set to brushless no my wheel nuts are not too tight. Nothing is hitting the motor on the outside. I have a video but I don’t know how to send it to you
@@nickc6756 did you try updating the firmware? And then possibly recalibrate the throttle. If that don’t solve it then I would email Furitek about it. Could be a bad board.
@@2fmrc any help with Bluetooth not connecting? It did the 1st time in seconds. Now nothing and I've downloaded the app again multiple times.
@@blazinghillie hmmm have you unplugged and replaced the Bluetooth module? Maybe shut your phone or device completely off and back on. I’ve also sometimes did a rebind on my controller to my receiver and it worked. Not sure why that has anything to do with it but it’s worked for me before. If none of that works I would contact Furitek and let them know of the issue. They can either help or maybe replace the unit.
@@2fmrc thank you! Unplugged and re connected the battery. Opened the app and connected immediately
Good stuff, hands-on know-how skills are the most valuable
Good stuff, anxious to get mine! The new light seems to work well 💡
Could u do a quick video on ur throttle curve setting. Possibly on what exactly the other settings do. Tekin has a good explanation in u touch & hold the name of each adjustment on the RX4.
Hey have you had any problems with the Bluetooth connecting? Can you show us how to make that connect with your phone by chance.
Well done vid once again. I can't wait for Furitek to ship mine out. I'm sitting on the surpass, an extra front axle/servo assembly, and a 4 link conversion that I'm trying to wait to mess with...
May i ask how your going about the 4 link conversion? I'm assuming this is for the front right? Something i want to do as well
@@pblabrat07 I made a set of high-clearance links out of aluminum ball joints and brass rods. I bought 2 "SCX24 4 Link Emax Servo Tray"s from Bang RC. I'm eventually going to have 4WS, hence why I bought 2 and really wanted to eliminate the Y-links.
@pblabrat07 If you Google the stuff I wrote in quotes, you'll find what I bought.
Got to test mine out yesterday Sunday at my event I love it it is awesome, bummed that I can’t plug my LEDs into it got to have my lights for my night runs, I will be picking up a couple more of the ones that you can plug LEDs in the waterproof and in casing now that’s what I thought I ordered, they got the lizard don’t matterIt is a great product I will be getting more appreciate as always you sharing love your videos until the next one
I just burned up my esc today... only goes in reverse. It sucks that these are out of stock. I might just have buy the replacement esc just to get me by.
Love your channel, was hoping you could post a video about the esc setting you use. Bought the Lizard and really like the functionality, bit im having issues figuring out the throttle curve. Please and thank you, you rock!!!!!
Exactly the video I needed for me setup. Thank you greatly appreciated 👌
Awesome! Glad it helped out!
Would you consider doing a quick view on how the lizard does with a barrage motor? It’s better than the stock motor but it’s not brushless as you know so I’m wondering if it’s even better than with the stock motor
Yeah I’ll try to throw one together. If you wanna check my video titled Best scx24 esc at about the 20 min mark I have the tegu in my truck with a barrage. The lizard runs just the same as it honestly.
@@2fmrc perfect I’ll check that out, thanks! 😄👍🏻
I finally got the app but it will not bind I’ve talked with the owner, the red dot just keeps going back-and-forth I’m thinking the Bluetooth ain’tWorking
I can't connect either,
I am also having the same problem.
No Bluetooth connection, but that also means it won’t work at all since I need to change to brushed.?.!...
Worries are over I got it to bind finally, I love it super slow crawl yeah what I like to do, I appreciate your videos and I’ll be here watching more,
How did u get it to bind to the app ? I have the app and the Bluetooth dongle. But no connection :(
@@MrMrsregor I'm still having the same issue also.
@@jessesommer7971 I got mine to work. I had to click on the little car picture and then it asked for a password. Password was on the instruction page. I think it was 1234
@@MrMrsregor I seen that. I'll give it a try. The second try, it took off and bound up on a blanket. The pinion spun on the motor shaft and now I have that issue. 0.5 mod should be here in a day or so. I will give this a try. Thank you so much for your help!
@@jessesommer7971 good luck 🤞
Sold out! Will definitely be purchasing when they are back in thanks for this vid 👍
🖐️🤠
FuriTek has re-opened their 2nd round for placing Pre-orders. You'll have to check which options
as it seems two of the dedicated brushless units are not available to preorder.
We only noticed as we checked on how our pre-order was progressing along.
Good luck 🤞
Cheers from 🇬🇧
@@rhm9178 thanks buddy I ordered two lizards my only issue is I have three rigs! 😝 Can't wait to sample that smooth modulating 👍 tbh my rig is very jittery with the mudslingers an all the brass mods installed hopefully shipping won't take too long to the UK🇬🇧
@@lnpxw20 Good on you placing a pre-order.
Did you order the lizard bundle which comes with the Bluetooth module?
Thanks on hoping for us not taking too long to receive here 🇬🇧
We are use to it over here so patience is a prerequisite for us all here; not to mention the sting waiting us with import & customs duties, and on top of that the courier's handling fee. We get hit hard here 😖
Cheers
ordered tegu with your code. and subscribed. good stuff. thank you.
Awesome! Really appreciate it! Let me know how you like it.
Thanks for the video, I just received my furitek lizard today, for some reason its not bypassing the esc, the stock esc has to be plugged into the battery otherwise there is no power. Any suggestions?
Just got 10% off on the lizard by using the code thanks man 🤟👍
Yesss!! Save that money! Glad to help any bit I can!
Great video you put out, just get into 1/24 hobby. where did you get the lizard esc from?
Thanks! I just put all the links into the description. They just started shipping these. Sold out at the moment but they should have more up soon!
Thanks for the video! I'm still having some trouble and hope you can steer me in the right direction. I just installed the Furitek Komodo and Tegu on my scx24, still running stock receiver. When I plug everything up I have steering but no throttle, forward or reverse. The Tegu is blinking like I can not get it to bind. What step am I missing or have I done something wrong? Thanks!
Do you have a recommend entry level radio and receivers you like? Just getting into it but im piecing it together as i can, your videos like these help alot.
Hello, I am new to the hobby, your channel is awesome! I just purchased the Furitek sc24 brushless motor. Can I run the motor without the lizard, or should I want until I can get the lizard? Thank you.
No you’ll have to have the lizard or some sort of brushless esc to run a brushless motor. The stock esc can’t run the motor on its own.
@@2fmrc I will purchase the one in your video. Thank you for your help.
@@BareBackBroncos no prob at all! Hope you like it
Just ordered mine! Stoked even with the backorder
Sheep
Will these work on a panda hobby tetra? If so then please make a video about how to mount them to a TETRA X2 because I have a TETRA X1
Sweet video, i am good with the lighting ether way. with the lizard can you operate the surpass motor without upgrading the stock ESC
Yep! Just plug it into the surpass and install the same way. Should work fine. It’s basically just bypassing the stock esc and using the receiver.
@@2fmrc sweet 👍😎. Thanks for the reply.
That’s a nice setup, by the way, were did you get the tube frame body? I have been looking every were..
Thanks. The tube chassis are available from shapeways.com they have several different ones. Just search scx24!
Greatly appreciated video 👍 I have mine pre-ordered
I was hoping to put a a Tegu or a lizard in my scx24 stock setup, then I found out that the lizard ESC comes default in brushless. I don't have Bluetooth nor do I have a smartphone. So I guess that means no lizard for my scx24. No manual switch on esc? ☹
Man I wish I would've watched this one before I ordered one without the bluetooth doo-hickey, no brushless option for what I'm putting it in.
If you could only get the Lizard or the Tegu which one is best? I like the whole Bluetooth thing.
Depends on the build. Tegu if I wanted 3s in it and lizard if trying to save space. That’s how I would choose anyway. They both are super smooth so no difference there really. Hope that helps!
@@2fmrc Thank you Matt. Both have Bluetooth correct?
@@EXPIOWA yes. You need to make sure you purchase one with the Bluetooth dongle included or pick one up with them though because some don’t come with them and then you can’t change any settings.
Would either of these work on the Panda hobby? I'm trying to upgrade my son's so we can compare a fully upgraded to a stock. Thanks for the your videos, they're awesome.
Yeah I have a video of me trying it in my panda. Helps a bit. The gearing on that truck limits its slow crawl but it’s much quieter for sure with the Furitek!
What are your current top components for the scx24? Or more so the best most efficient upgrade path from stock/new owner to top level.
I would say definitely wheels and tires with weights in at least the front wheels. I try to keep the truck 60% weight in the front 40% to the rear. Tires make the biggest difference in performance straight away. Servo will be next because the stock servo is just kinda weak especially after adding some weight and better grip. When doing the steering servo I would do the steering links with the hot racing links. Much less slop in the steering with those. After that it comes down to how smooth you want the throttle to be. I would possibly go for the Furitek esc next or if you feel stock is smooth enough for your driving you can continue from there with whatever you like. Those main things will make a HUGE difference in the truck though!
Another awesome video sir. I can’t wait to get my esc. What is that white bouncer cage for? I would like one.
It’s going to be another scx24 build!
@@2fmrc that’s badass I can’t wait to see the video of the build
Awesome channel and thanks for the vid! I hooked my Furitek up and only have steering working but absolutely no motor output. Set to brushed mode in app and tried on two different motors Any help appreciated thanks!!!
Did you make sure it’s been updated to the latest firmware? Also calibrate the throttle through the app? That’s about all I know. If that don’t help I’d definitely contact Furitek and they’ll take care of ya I’m sure. Hope that helps!
Looks like it has better low end control but the motor still lacks torque. It's stalling with those tiny tires you were trying to crawl over.
Yeah you really need to pair it with their Komodo motor for the best results but it’s an improvement with any motor.
Hoping new stock of Lizards are 3S!
If I’m going to spend the money for an aftermarket esc should I just get a new motor too?
Is there any advantage to running the TEGU over the lizard other than the ability to use 3s on the TEGU?
Great video! Love your content!
What's five difference between the tegu and the lizard?
I can't get mine to connect with the throttle. I can steer it and work the lights just can't get it to move. Any ideas. I got the first style you showed. Without the Bluetooth attachment and the brushless motor that came with it.
Tried to install a Lizard Pro with a brushed Ox motor. Slow crawl is ok but full throttle cuts out. Just falls flat on it's face. I calibrated several times, switched radios and even tried it in a different rig. Is there anything else I can try before I return it?
So the furitek main board with the box would replace the factory one? And the
lizard would be adding more to the truck but give you the same benefits?
Wow 2FM RC
We just noticed your Furitek promo code in your description area; real shame 😩 as we could of saved 10% on the bundle we pre-order; Especially when global UPS shipping cost $19
Every little bit helps these days ☺️
He mentions it all the time, i used it and worked just fine
I don’t see a promo code in the description :/
MATT,
MY STUFF JUST COME IN. A LITTLE CONFUSED, GOT THE LIZARD. THOUGHT IT WOULD COME WITH THE BLUE TOOTH TOGGLE. NEED TO GET SEPRATE? HOW CAN I GET A HOLD YOU, I DONT HAVE ANY SOCIAL MEDIA AT ALL. THX BEST REGARDS.
Yeah you have to either buy the one with the Bluetooth dongle or purchase it separate. I’m not sure if they have any in stock but they should be in their site.
furitek.com/collections/all
@@2fmrc just got out of the site they are all sold out. Hahaha too bad I'll have to keep an eye out when they do get them up for sale once again. Thx a bunch appreciate it very much. Rock n Roll 🤘🏻
@@nlhpr11 sorry about that! Hopefully they’ll be back in stock soon!
Great vid! Random question, have you tried the HR internal air shock yet?
No I haven’t. I didn’t like the big body on them. My old man emus have a larger body like that and it really restricts mounting options.
@@2fmrc True that's what I've heard.
Do these esc’s eliminate the bog down when turning? When driving and I steer left or right the truck slows down
My esc/receiver went out recently on my scx24 and there on back order every where is there anything else I could buy that would work with my stock transmitter ? The whole esc and receiver combo is garbage and I need a new set up with out saughtering and buying new cables ? Thanks
How is the kyosho mini z 4x4 upgrade esc project going? Also this is rad.
We had some issues with the first esc I tested. They are working on a 2nd version now and hopefully I’ll be getting it soon because my kyosho is just sitting and waiting lol
how good is the drag brake if i want less braking for chasing the dog lol
Can you post a size comparison of the lizard to SW micro2 on your RUclips story/picture thing ?
installed lizard. changed to brush truck ran fine. turned esc off. next day battery voltage = 1.1 volts. furitek says unplug battery after use. do you? I thought off was off. never did this with stock setup.
I’ve always unplugged my batteries. Lots of the 1/10 escs drain the battery even while in the off position so I’ve always made it a habit to unplug the battery when finished. I also don’t ever leave the batteries in the truck anymore. Never know when they may crap out. Rather them not burn the truck up with them if they do lol
Thank you sir.
This is the answer to my question relating to running on stock motor.
My Lizard is on its way via UPS and due to be delivered tomorrow...
Furitek are great regarding communications and keeping you updated at every step...
Looking forward to more of your informative vids...
Lighting now much better BTW..
Thank you ...
I got 2 coming and I was wondering does it tell you how to get the app for my phone installed it looks difficult to program I'm not the brightest bulb in the box
It comes with a sheet of directions now so I don’t think you’ll have much problem. The app is called FuriCar
Thank you for the reply now just getting it installed 👍
Recently getting into the mini crawlers, would you recommend this for the WPL C24-1 -KM with the 370 motor? Just wondering if it might work with that Receiver/transmitter? do you know a model/ part# of a 3S that would fit in the C24?
Hi. I have some led lights connected to aux channel 3 now. If I get the lizard. Will my lights still work?
I would think so. I’ll have to test that. I’m not running any leds on mine. The stock receiver is still getting power so I would think it should still run the leds.
@@2fmrc hi there, did you find out if led-ports and aux channel still works for LEDs? Thanks
Does the lizard get rid of that high pitched whine the stock has? I’m thinking of getting it. Can I then buy a brushless motor later?
Yes usually it gets rid of that and it will definitely work with a brushless setup later. You’ll just change it from brushed to brushless in the app.
@@2fmrc thanks for always responding and having great content man I really appreciate it. I’m new to the hobby and there’s a lot to learn. Seems like the lizard would be a good upgrade since I don’t want to get to involved with the motor yet .
Hey Matt! I have a crazy question. Received the Furitek a couple months back and everything works great, but my transmitter doesn't see the esc. Everything works it just doesn't recognize it and makes crazy ass beeps at me the whole time. Have u experienced this?
What transmitter are you using? Stock? Do you have the Furitek plugged into the channel 2 of it? Never had an issue at all
So it will not work with the Carisma MSA 1E*. No chan 2 on the ESC/Receiver. Thanks anyway for your vid and explanations.
edit :*stock truck
It would with a different transmitter and receiver. Similar to what I did with my atlas install.
@@2fmrc yep its seems. I try to improve my Carisma with a minimal budget, but its not easy. Not mutch aftermarket parts available for this little dudette.
May give it a try someday. Thanks
Seems good but I want to use my preferred radio
Much easier to do that honestly lol
So the sidewinder micro 2 is available for purchase right but the furitek isn’t. Do you think I should wait for the furitek or just buy the micro2? I’m going with the surpass!
Wel Furitek is shipping now. They sold all of the preorders but should have more available soon hopefully. Kinda up to you on how long you wanna wait. The Furitek is better IMO but the sidewinder is very good also!
@ 2FMRC - You just saved me 20 bucks on 3 Lizards! :) Going to try them on stock electronics, but sounds like for LEDs I will need a multichannel receiver w/ transmitter. The Tegu having LED ports only would matter if running it off the stock ECS/Receiver - it sounds like (...those LED ports on the stock ESC would not output when hooked up to the Tegu or Lizard as the ESC I'm guessing.) Seems like if you have your own receiver with LED outs, a Lizard is all you ever need? (except for running 3S). --Has anyone tested this? If stock ESC/Reciever LED outs work with a Lizard or Tegu plugged in as the ESC?
Awesome! $20 is great!!! I’ve not really tested the leds On them as I kinda figured if I wanted the leds I’d rather run them on my receiver and have the ability to turn them on/off with a switch on the controller etc. I don’t think I even have lights on any of mine anymore lol. I still have some lights. Maybe I’ll hook them up and see how they work. Imo like you said unless you just feel you have to run 3s the lizard is the way to go!
With the Lizard or Iguana, do LED’s plugged into the old ESC still get power and work?
What magnets do you use to hold your bodies down?
Something this size. As long as they say rare earth magnets around that size you should be good. Hobby Lobby and harbor freight also have them sometimes. Sometimes they only have some that are a bit smaller but they work. Here’s the ones I use most
www.ebay.com/itm/12-100-500pcs-12mm-x-3mm-1-2-x-1-8-N52-Strong-Rare-Earth-Neodymium-Magnet-Disc-/302030262749?_trksid=p2349624.m46890.l49292
Someone may have asked or you may have said it in the video but if you buy the lizard pro 2 kit with the brushless motor do you have to swap receivers or will the stock one still work I'd like ro get one but don't want to buy a new receiver just yet since I only have 1 truck right now
The stock one will work with it as long as it’s the original esc/receiver. The new version that’s blue on top won’t work with it because it don’t have a ch2 port on the esc itself.
@@2fmrc awesome thanks for the great information
Got it going, I push that little black button on the controller turned it on so it must be on and off switch I didn’t know, but I figure I push it it came on, now trying to get the app because it is set at brushless I need brush
Can't get mine to work at all I'm very savvy mine just flashes blue light is it defective? I've done everything. Nothing works
Can these little nifty thing be used to bind to a different remote than the Axial one ? Ex. Futaba, Spektrum...
That’s so clever, it’s like a piggy-back ECU !
It’s not clever it’s obvious use your fucking brain
Just received my furitek in the mail couple weeks ago, it has a 3 pin jst and most motors have a 2 pin jst. So did u just solder or buy an adapter. If bought do u have a link? Please.
For the brushed motors with 2 pins I just plug the 2 into the 3 on the one side. Leaving one pin open. On the brushless motors you’ll use the 3 wire connector that comes with it.
Got one 2 months ago the tegu and it’s not working today I got vids on RUclips it’s was working awesome but today it gave out can u give me some feedback on what it could be
Hmmm if it was working fine and then just stopped it almost has to be the esc died or something. I’d definitely contact Furitek about it. Did you try a couple different batteries to make sure that wasn’t an issue? That’s about all I know it could be. Will it power on at all? Maybe try to update or recalibrate if so.
Hey thanks for answering back. Yeah did try my other batteries I put 2 vids up showing it turns on but when I hit the throttle nothing ,then I did it with the stock esc and works like normal so I thought maybe it burn out but it’s never gave me a problem…& it’s was working awesome all my vids…more upset cause I’m trying to get on this competition scx24 they got going where I live next month & that was part of my secret weapon… thanks 🙏 again I appreciate it thought maybe furitek would have got back to me… again thanks 🙏💯👌🏽👍🏽🤙🏽✌🏽
Man oh man got it working, can’t figure out how to get the app on my phone
Did you figure it out?
How did u get it to work .?.!.
I still have not Bluetooth connection
Yes I finally got it works great, talk to the owner just didn’t know how to get the app, get to test it out yesterday at one of my events and it is sweet love to slow crawl, just got to learn some adjustments, like the throttle curve and such, running the barrage motor right now. It wouldn’t bind at first the next day I tried it again and it banded.
@@MrMrsregor you got the app, mine wouldn’t bind at first, the next day I tried it again and it finally hooked up, when that red dot is going back-and-forth touch the little car that showing, and it gets bigger then the red dot will pick it up, mine wouldn’t at first but then it did only thing I know hope it works out I know it well it is a awesome speed controller, You’re gonna love it
@@andrewrichey7374 thank you! I got it working. Just had to click on the little car and enter the password!
Works great, thanks!
I just tried to connect mine to Bluetooth and it doesn’t pick up my truck at all also my Bluetooth module didn’t have an antenna on it do you think this may be the problem?
Could be. All of mine have had the antenna. Try to power off everything and maybe reinstall the app. Then try again. If that don’t work I’d contact Furitek and let them know about it. They may have to replace the Bluetooth module.
Another great vid. Thanks
Could you mount the motor towards the back of the truck if wanted too ? Run the Toyota body and don’t know how I’m gonna mount it and run the yota body
Yes. I run my motors however fits the build usually. You can actually just switch the motor direction in the Furitek app so no wire swapping or anything needed. Just flip the motor and trans however ya need!
@@2fmrc thanks man ! If I trusted anyone it’s you
@@AwokenBMX no prob! I mean it kinda depends what chassis you’re running and motor as to whether they will fit well but you can work with most any of them and make them work either way. Let me know if ya need anything else!
@@AwokenBMX Hey I had to check out your vids and love them. I rode bmx from the time I was around 13 until around 30. Very off and on from my early 20s till I was old and getting hurt wasn’t fun anymore 😆. A lot of great times on the bike tho! Miss those days for sure
@@2fmrc yeah I’m all stock so
Hopefully I can make it work ! And haha yeah bmx was everything for me growing up now I’m in to the bigger toys motocross and cars lol
i have mini komodo and steallar trans would this be the same with the Lizard Ultimate ?
Thank you very informative
The esc is Not compatible with an Element 24? Just the scx24
It should work with the element. May have to pull the stock esc in the element and add your own receiver but it’ll definitely work in it.
Cool video.. nice Audio
Another great video thank you
Just got my Tegu main board. Didn't think I needed the bluetooth module.......it ships with a default setting to brushless. Is there a way to change the setting manually? Can't order just the module from Furitek Vietnam anymore, just Furitek USA and the discount code doesn't work. Do I wait for the back-ordered module or do I order a brushless motor and hope that I dont need to tune it with the bluetooth module and App?
Yeah you definitely need the Bluetooth module for any tuning. As far as whether to wait or not that’s kinda up to how long you wanna wait. I honestly have no idea when they plan to have more or ship. I would email them and try to get one ASAP. Let them know that you didn’t know you had to have it when ordering and maybe they’ll rush ya one 👍
What Bluetooth is that? And do you have links to the parts for everything?
Just added it all to the description. Sorry thought it was there already.
Awesome video bro 👍💪😁
I want to do a brushless system in my scx24 so it can slow crawl like your surpass outrunners, but I want it to be inrunner in case of getting dirty, what motor do you recommend (I would use the FuriTek esc), and preferably a motor that has a mount my gamyrc,
Honestly the Furitek will smoothen out basically any motor you pair it with. I’d just pick the one you want and the mount and run with it. I haven’t tested many inrunners with it just because I haven’t needed any but I’ve seen them run several with the esc and it’s smooth as butter at basically any kv rating. Crazy really!
@@2fmrc awesome thanks so much, do you think the surpass 1410 is good? Or do you have any suggestions?
So it's got good slow crawl on a flat surface but how is the slow crawl on an obstacle
Better than stock. Especially with a surpass motor upgrade!
Does this help with the stock motor not burning out as much?
Is there a benefit of doing the lizard vs the tegu or the other way around?
Well the tegu now runs 3s and the lizard don’t. Not sure if that could change later with a firmware update or not. The tegu also has a couple outputs like led whereas the lizard don’t. Other than that they both seem super smooth!
When will these be in stock again? I want two lol
Not sure honestly. Don’t forget to use my code for a 10% discount tho! Just use 2FMRC
Apparently delivery for mine is today, crossing my fingers that it can make that jump from the Midwest to the west coast in under a day
Mind if I ask what your order number is?
@@GodlessDad 1636
@@pblabrat07 That's mildly annoying. I'm 1525 and have yet to ship.
@@GodlessDad ah sorry to hear that i did only get the lizard and bt dongle idk if that has anything to do with it
@@pblabrat07 I'm sure it does. I got the Tegu with the dongle. I'll bet they're batch shipping them.
How do you get the app on your phone I’m searching can’t find
Tried to hook up the lizard using your steps and I'm not getting power to the esc any help? Same setup stock deadbolt with emax servo
There is a tiny little button on them. Did you press it? My original one always came in without a switch but most the time now ya gotta tap it.
Perfect! Thanks for all your help and videos always a big help!
The throttle is reverse now? Is that normal
@@mj8839 it happens. You can go to the calibrate tab and calibrate it to your transmitter or you can hit the motor direction tab and change that.
So what’s the deal with the limited supply at furitek?
I think they are just trying to catch up. The had did preorders and sold out those. Just a smaller company trying to get rolling I believe.
Thanks buddy should help some people
So if you get the furitek tegu are you able to use your stock transmitter?
With the V1 esc you can. Not the new blue sticker one. It won’t work with it.
What if you wanna run brushed and you don’t have the blootooth
Gotta have the Bluetooth dongle to change settings.
Does yours ever get hot after a couple minutes?
Do you want to sell any of your old axial transmitters and receivers?
Probably not at the moment. I sold a few and now using some here and there for other small trucks that have horrible setups lol
Damn brother I hope these come back into stock soon. Any idea when I'll be able to get my hands on one?
I honestly have no idea lol. If I hear anything I’ll definitely post it!
🖐️🤠
FuriTek has re-opened their 2nd round for placing Pre-orders. You'll have to check which options
as it seems two of the dedicated brushless units are not available to preorder.
We only noticed as we checked on how our pre-order was progressing along.
Good luck 🤞
Cheers from 🇬🇧
Damn brother.. maybe you should use your fucking eyes and brain and maybe get on a mailing list for updates? I mean how stupid can one person be? Oh wait your here having to watch someone else do the work that makes sense