I want to send a sincere thank you! I feel that you made this video especially for me as I have just purchased the NB4 PRO + and found out it does not bind to just anything and I have asked you a few questions on other videos. Thank you for replying to those BTW, you are one the RUclips persons that actually cares about content and your viewers, not just the numbers. Many of us do not have much money and these radios are up there in price so we want to make the most out of them, your instructions help us do just that. I wanted to tell you I have been a modeler for many years and have tons of spares (mostly airplane and helicopter stuff) so I 3d printed a little test bench that holds 8 servos and a space for the receiver. While following your videos I was able to simulate a setup with a TRX4 2 speed trans, both diff locks (yes I found out there are labels already in there for that) lights, and winch control. my test rig also has a combo of digital and analog servos. I just want you to know you helped this guy over here in USA a great deal and I really appreciate what you are doing on here.
You're the GUY, with the experience, knowledge and info. Wish I had come across tihis before I did a frustrating search on these receivers. But now it's clear about 'Classic' vs, 'Advanced'. The only bit I could add, if I may, is the 'double RX option' you get only with the advanced RXes, and you have covered this already too, I believe. This is an interesting option if you want to mix the old ibus and new ibus2 sensors in one vehicle, if I'm not mistaken. It's still a work in progress with my helis. Cheers.
So only enhanced Rx will allow you to bind 2 receivers to one memory, but on enhanced receivers you have the option to set one of the ports to ibus to allow older sensors or ibus 2 for the newer ones :)
Hi Craig, I’m using the INR4-GYB in my Slash Ultimate. We do amateur asphalt parking lot racing. I use it mainly for the Gyro. Is this a good option or do you recommend a different model? Specifically for the Gyro?
This video was perfect in helping me figure out why I had to rebind to my fgr4 v2 receiver whenever I went to run my Sledge. My kagama and Talion EXB both have the fgr4b and I just turn on the tx and the esc and go. If they are both AFHDS 3 why are they on different protocols? Thats what throws me for a loop.
Thanks for the great info. Is there a receiver that is comparable to the FS-iA10B? It is a AFHDS 2A that binds to a FS-i6s. I am looking to see if I can do rc tanks with the NB4. Can you program the NB4 for this purpose? Cheers
Thank you for the info Craig! Very informative. I watched the entire video and I have a few questions still. 1. Do you know what the hz is for hobbywing quicrun esc lineup? 2. If your digital servo doesn't specify hz rating is it ok just to leave the transmitter on the default 400hz setting or should i go down to 333hz. 3. Can you do a video on how to change the screen protector. Mine came with a bubble and i dont want to scratch my screen trying to change it.
So almost all digital servos can run 333hz to 400gz no issues at all so leaving at 400hz is fine, the quick run series should all be fine it 400hz digital I have run this one many without issues, as for the screen protector it's just like a mobile phone just peal it off and drop the new one on if you start from on side then you should be able to get it on without bubbles :)
Be interesting to see how you get on with it, in the past Dumbo RC radios have suffered interference, run aways and not great latency so be interesting to see if things have improved :)
I have the new dumbo ddf 350 for my bashers and I haven't had any problems with runaways and latency the only problem I think they have is when there to close to the receiver just like the new radio master they both interfere when there to close u can make the car stop working it's weird but never had a problem with any of that...
Hi Craig. I'm running 1/8 nitro on road and wonder if FGR4B (one external antenna) or FGR4D (two internal antenna) is more suitable for this application. Thanks.
I have NB4+ with latest firmware and Ive been having a issue with "Auto Off" feature. If let sit and AUto Off engages it turns screen black but not off just lit up black. After screen goes black theres no way to power TX back on unless I hit the little reset button under handle then everything is fine until Auto Off engages again and I have to reset. Have you ever came across this issue?
No it's not something I have seen and we have 6 different nb4 radios, that said the 1st thing I do is disable the auto off feature as I have my radios on for a long time making all the videos but I'll have a look and see if my nb4+ behaves the same and let you know.
hey can i ask do they sell a receiver with a gyro?? thank you for all the videos mate you have helped me so much and make it super easy to understand 👍🏽
@@WTFRCCars thank you for the reply, i'm watching all the setup vids now and thank you for all the time and help you give us all by doing all the vids it really does help 👍🏽
I am building a new drift car, and i bought the nb4+ and it came with a FGr4S V2 receiver, would that fall under the classic receivers? My servo choice was the Reefs RC 299LP with Reefs RC drift gyro and i went with the Hobbywing Xerun XD10 Pro Drift Spec ESC and Matching motor Hobbywing Xerun D10. Is the receiver (FGr4S V2) that my nb4+ came with ok or should i change it out to one of the others?
Yes it's a classic receiver but it's fine for running what you have, you may want to look at the fgr4d in the future if you want to run above 333hz servo speed or ibus 2 but for now it should work fine for you :)
Any way to bind one receiver to two transmitters? As I have a lot of cars and sometimes me and my son want to use cars that are on the same transmitter!
My nb4 firmware is still 2.0.85 and I can’t bind to my inr4 or gmr receivers. also cannot connect to laptop tried different cables and ports tried restarting with the nb4 still on and no luck. The firmware update and assistant does not show any connections. Do you have any solutions?
If it's not being detected by the pc it's normally one of a few things, USB cable is just a charge cable not a data cable, the base battery is not fitted correctly on the radio so the data pins are not connected, the pc has very old usb drivers that don't fully support usb standard or have missing drivers from the pc, sometimes just connecting a usb hub and connecting the transmitter to that can help too
Thank you for the reply. Laptop is an hp vitcus with windows 11 it’s relatively new and I have updated the drivers. I tried reconnecting the battery on the transmitter and I also bought a few different “data cables” to try and nothing has worked. But I will get a hub and see how it goes. Does the cable have to be micro usb to usb or can it be usb to usb
I want to send a sincere thank you! I feel that you made this video especially for me as I have just purchased the NB4 PRO + and found out it does not bind to just anything and I have asked you a few questions on other videos. Thank you for replying to those BTW, you are one the RUclips persons that actually cares about content and your viewers, not just the numbers. Many of us do not have much money and these radios are up there in price so we want to make the most out of them, your instructions help us do just that. I wanted to tell you I have been a modeler for many years and have tons of spares (mostly airplane and helicopter stuff) so I 3d printed a little test bench that holds 8 servos and a space for the receiver. While following your videos I was able to simulate a setup with a TRX4 2 speed trans, both diff locks (yes I found out there are labels already in there for that) lights, and winch control. my test rig also has a combo of digital and analog servos. I just want you to know you helped this guy over here in USA a great deal and I really appreciate what you are doing on here.
Happy to help and thanks 👍
Being new to the NB4+ I am finding your videos absolutely invaluable, thank you very much👌
Glad ya like em :)
You're the GUY, with the experience, knowledge and info. Wish I had come across tihis before I did a frustrating search on these receivers. But now it's clear about 'Classic' vs, 'Advanced'. The only bit I could add, if I may, is the 'double RX option' you get only with the advanced RXes, and you have covered this already too, I believe. This is an interesting option if you want to mix the old ibus and new ibus2 sensors in one vehicle, if I'm not mistaken. It's still a work in progress with my helis.
Cheers.
So only enhanced Rx will allow you to bind 2 receivers to one memory, but on enhanced receivers you have the option to set one of the ports to ibus to allow older sensors or ibus 2 for the newer ones :)
Another great video. Thanks.
Thanks 👍
Hi Craig, I’m using the INR4-GYB in my Slash Ultimate. We do amateur asphalt parking lot racing. I use it mainly for the Gyro. Is this a good option or do you recommend a different model? Specifically for the Gyro?
The inr4-gyb is the only receiver with a gyro and tbh I run them in my yokomo MD 2.0 works as good as any gyro
@ thanks awesome thanks🦾
Also working with Dumborc P6 or X10 receivers? Thanks & merry Christmas!🎄🎅🏻🙂👍🏻
No there's receivers are a much slower protocol
This video was perfect in helping me figure out why I had to rebind to my fgr4 v2 receiver whenever I went to run my Sledge. My kagama and Talion EXB both have the fgr4b and I just turn on the tx and the esc and go. If they are both AFHDS 3 why are they on different protocols? Thats what throws me for a loop.
The classic type are the old original receivers the enhanced are the new ones made for ibus 2 and faster connection modes that all
@@WTFRCCars Thanks for the reply! Makes sense, having the enhanced receivers on a different protocol than the older gen receivers.
Thanks for the great info. Is there a receiver that is comparable to the FS-iA10B? It is a AFHDS 2A that binds to a FS-i6s. I am looking to see if I can do rc tanks with the NB4. Can you program the NB4 for this purpose? Cheers
You can use any of the receivers for this but the fgr8b will probably work best for you and yes you can setup a tank on the nb4
Thank you for the info Craig! Very informative. I watched the entire video and I have a few questions still. 1. Do you know what the hz is for hobbywing quicrun esc lineup? 2. If your digital servo doesn't specify hz rating is it ok just to leave the transmitter on the default 400hz setting or should i go down to 333hz. 3. Can you do a video on how to change the screen protector. Mine came with a bubble and i dont want to scratch my screen trying to change it.
So almost all digital servos can run 333hz to 400gz no issues at all so leaving at 400hz is fine, the quick run series should all be fine it 400hz digital I have run this one many without issues, as for the screen protector it's just like a mobile phone just peal it off and drop the new one on if you start from on side then you should be able to get it on without bubbles :)
Super 🌟
👏 🙇♂️ ❤
😊
thanks , if i upgrade , i think im going with the new dumbo , and the receivers that have the gyro
Be interesting to see how you get on with it, in the past Dumbo RC radios have suffered interference, run aways and not great latency so be interesting to see if things have improved :)
I have the new dumbo ddf 350 for my bashers and I haven't had any problems with runaways and latency the only problem I think they have is when there to close to the receiver just like the new radio master they both interfere when there to close u can make the car stop working it's weird but never had a problem with any of that...
Nice to know :)
Hi Craig. I'm running 1/8 nitro on road and wonder if FGR4B (one external antenna) or FGR4D (two internal antenna) is more suitable for this application. Thanks.
Fgr4b is better for nitro :)
I have NB4+ with latest firmware and Ive been having a issue with "Auto Off" feature. If let sit and AUto Off engages it turns screen black but not off just lit up black. After screen goes black theres no way to power TX back on unless I hit the little reset button under handle then everything is fine until Auto Off engages again and I have to reset. Have you ever came across this issue?
No it's not something I have seen and we have 6 different nb4 radios, that said the 1st thing I do is disable the auto off feature as I have my radios on for a long time making all the videos but I'll have a look and see if my nb4+ behaves the same and let you know.
@WTFRCCars thanks man I'd really appreciate the help. Otherwise I'll just disable Auto Off so there's no issue. Just wondering
Quick question, can you run ibus temp sensors, and an ibus 2 gps on the same enhanced receiver at the same time?
No you can only run ibus or ibus2 not both at the same time
hey can i ask do they sell a receiver with a gyro?? thank you for all the videos mate you have helped me so much and make it super easy to understand 👍🏽
Yep the INR4-GYB I have vids in how to set it up
@@WTFRCCars thank you for the reply, i'm watching all the setup vids now and thank you for all the time and help you give us all by doing all the vids it really does help 👍🏽
@Marts112 no worries if ya get stuck with anything just ask :)
I am building a new drift car, and i bought the nb4+ and it came with a FGr4S V2 receiver, would that fall under the classic receivers? My servo choice was the Reefs RC 299LP with Reefs RC drift gyro and i went with the Hobbywing Xerun XD10 Pro Drift Spec ESC and Matching motor Hobbywing Xerun D10.
Is the receiver (FGr4S V2) that my nb4+ came with ok or should i change it out to one of the others?
Yes it's a classic receiver but it's fine for running what you have, you may want to look at the fgr4d in the future if you want to run above 333hz servo speed or ibus 2 but for now it should work fine for you :)
Any way to bind one receiver to two transmitters?
As I have a lot of cars and sometimes me and my son want to use cars that are on the same transmitter!
No that's kind of the whole point of binding so no other tx can control the receiver :) it only takes seconds to bind them though :)
@ if only access to the receivers is that easy.
@alexaustin5568 so I built a switch into my kraton exb so I don't have to get to the receiver ruclips.net/video/v9MNBZPapNM/видео.html
whats thats on the dual antenna, on the cable?
The bvd monitor cable ?
@@WTFRCCars no the antenna have some black ends. Or they better than normal antenna
There the flight receivers and yeh the do work better they have proper antennas not just wire
@@WTFRCCars oh nice , I have the dual antenne ftr8b but not with those black antenna
My nb4 firmware is still 2.0.85 and I can’t bind to my inr4 or gmr receivers. also cannot connect to laptop tried different cables and ports tried restarting with the nb4 still on and no luck. The firmware update and assistant does not show any connections. Do you have any solutions?
If it's not being detected by the pc it's normally one of a few things, USB cable is just a charge cable not a data cable, the base battery is not fitted correctly on the radio so the data pins are not connected, the pc has very old usb drivers that don't fully support usb standard or have missing drivers from the pc, sometimes just connecting a usb hub and connecting the transmitter to that can help too
Thank you for the reply. Laptop is an hp vitcus with windows 11 it’s relatively new and I have updated the drivers. I tried reconnecting the battery on the transmitter and I also bought a few different “data cables” to try and nothing has worked. But I will get a hub and see how it goes.
Does the cable have to be micro usb to usb or can it be usb to usb
@vinnyz34 it has to connect to the micro usb on the nb4 and usb A in the laptop
INr4-GBY?
Yep any afhds3 will work
Bit long but good information
Yep lots of info and i could have made the vid longer lol